SLC NAND Flash Parallel/Serial 3.3V 256G-bit 32G x 8 100-Pin LBGA FLASH - NAND (SLC) Memory IC 256Gbit Parallel 100 MHz 100-LBGA (12x18) The MT29F256G08AUCABH3-10ITZ:A is a high-density 256Gb Single-Level Cell (SLC) NAND Flash memory device from Micron Technology. It provides non-volatile data storage with high reliability, fast read/write performance, and long endurance, making it suitable for industrial, networking, embedded computing, automotive, and data-logging applications. The device supports both asynchronous and synchronous interfaces and complies with the Open NAND Flash Interface (ONFI) standard for enhanced interoperability and performance. It is housed in a compact 100-ball LBGA package (12 mm × 18 mm). • Open NAND Flash Interface (ONFI) 2.2-compliant1 • Single-level cell (SLC) technology • Organization – Page size x8: 8640 bytes (8192 + 448 bytes) – Block size: 128 pages (1024K + 56K bytes) – Plane size: 2 planes x 2048 blocks per plane – Device size: 32Gb: 4096 blocks; 64Gb: 8192 blocks; 128Gb: 16,384 blocks; 256Gb: 32,768 blocks • Synchronous I/O performance – Up to synchronous timing mode 5 – Clock rate: 10ns (DDR) – Read/write throughput per pin: 200 MT/s • Asynchronous I/O performance – Up to asynchronous timing mode 5 – tRC/tWC: 20ns (MIN) – Read/write throughput per pin: 50 MT/s • Array performance – Read page: 35µs (MAX) – Program page: 350µs (TYP) – Erase block: 1.5ms (TYP) • Operating Voltage Range – VCC: 2.7–3.6V – VCCQ: 1.7–1.95V, 2.7–3.6V • Command set: ONFI NAND Flash Protocol • Advanced Command Set – Program cache – Read cache sequential – Read cache random – One-time programmable (OTP) mode – Multi-plane commands – Multi-LUN operations – Read unique ID – Copyback • First block (block address 00h) is valid when shipped from factory. For minimum required ECC, see Error Management (page 114). • RESET (FFh) required as first command after power-on • Operation status byte provides software method for detecting – Operation completion – Pass/fail condition – Write-protect status • Data strobe (DQS) signals provide a hardware method for synchronizing data DQ in the synchronous interface • Copyback operations supported within the plane from which data is read • Quality and reliability – Data retention: JESD47G compliant; see qualification report – Endurance: 60,000 PROGRAM/ERASE cycles • Operating temperature: – Commercial: 0°C to +70°C – Industrial (IT): –40ºC to +85ºC • Package – 52-pad LGA – 48-pin TSOP – 100-ball BGA – 132-ball BGA #Micron #NANDFlash #SLCNAND #FlashMemory #NonVolatileMemory #ONFI #EmbeddedSystems #IndustrialElectronics #DataStorage #MemoryIC #LBGA100 #HighReliability #MT29F256G08AUCABH310ITZA #MicronMemory #ParallelNANDFlash

FLASH Memory IC 8Mbit SPI 100 MHz 8-UDFN (5x6) #commonpartslibrary #integratedcircuit #flashmemory

dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 20 MIPS 48KB (16K x 24) FLASH 40-PDIP Digital Signal Controller (DSC) for embedded control and digital signal processing applications, featuring a 16-bit dsPIC® core operating at up to 20 MIPS. It integrates 48 KB Flash program memory, 2 KB RAM, 1 KB EEPROM, and supports a 2.5 V to 5.5 V operating voltage range. The device includes a 13-channel 12-bit ADC, CAN, I²C, SPI, and UART communication interfaces, multiple PWM outputs, and is housed in a 40-pin PDIP package with up to 30 programmable I/O pins. #Microchip #dsPIC30F #DSPIC30F4013 #DigitalSignalController #DSC #16Bit #20MIPS #FlashMemory #CAN #I2C #SPI #UART #PWM #ADC #EmbeddedControl #MotorControl #PDIP40

PIC PIC® XLP™ 16F, Functional Safety (FuSa) Microcontroller IC 8-Bit 32MHz 56KB (32K x 14) FLASH 40-PDIP 8-bit microcontroller designed for embedded control applications, featuring a PIC® CPU operating at up to 32 MHz, 56 KB Flash program memory, 4 KB RAM, and 256 bytes EEPROM. It operates from a 2.3 V to 5.5 V supply and integrates a 10-bit ADC (up to 35 channels), 5-bit DAC, configurable logic cells (CLCs), PWM/CCP modules, EUSART, SPI, I²C, Peripheral Pin Select (PPS), and Core Independent Peripherals (CIPs) in a 40-pin PDIP package. #Microcontroller #8BitMCU #PIC16F18877 #Microchip #EmbeddedSystems #FlashMemory #ADC #DAC #SPI #I2C #UART #EUSART #PPS #CLCs #PWM #PDIP40

2 Gbit NOR Flash Memory IC – Non-volatile memory with 256M × 8 organization, supporting SPI Quad I/O with DTR at up to 166 MHz. It operates from 2.7 V to 3.6 V, with 40 ms word write and 1.5 ms page write times. The device is housed in a 24-CSPBGA (6 × 8 mm) package and operates from −40°C to +85°C. #Macronix #MX66L2G45GXRI00 #NORFlash #FlashMemory #SPI #QuadSPI #DTR #2Gbit #MemoryIC #EmbeddedSystems #Storage

FLASH Memory IC, 512 Mbit (64 Mbyte), JEDEC xSPI Extended SPI / Octal DDR, up to 200 MHz, 1.7–2.0 V, extended temperature -40°C to +105°C, 24-ball TFBGA (6 × 8 mm). #FlashMemory #NORFlash #SPI #OctalSPI #xSPI #MemoryIC #ISSI

The W25Q02JVSFIM from Winbond Electronics is a 2G-bit (256M x 8) Serial NOR Flash Memory device designed for high-density non-volatile data storage applications. It supports high-speed SPI, Dual/Quad SPI, QPI, and DTR interfaces, providing fast data transfer and efficient memory access for embedded systems. The device operates from a 2.7V to 3.6V supply voltage and is available in a 16-pin SOIC surface-mount package. It is suitable for applications such as firmware storage, boot code memory, industrial controllers, IoT devices, automotive electronics, and embedded systems requiring large-capacity reliable flash memory. Key Features Memory Density: 2G-bit Serial NOR Flash (256M x 8) Flash Technology: Single-Level Cell (SLC) NOR Flash Interface Support: Standard SPI, Dual SPI, Quad SPI, QPI, and DTR modes High-Speed Clock Frequency: Up to 133 MHz operation Fast Access Time: Approximately 7.5 ns Supply Voltage Range: 2.7V to 3.6V Non-Volatile Data Storage: Retains stored data without power Memory Organization: 256M x 8-bit architecture Package Type: 16-pin SOIC (7.50 mm width) surface-mount package Operating Temperature Range: -40°C to +85°C Page Program Time: Approximately 3.5 ms Applications: Embedded firmware storage, BIOS/boot memory, industrial equipment, IoT devices, and consumer electronics Hashtags #W25Q02JVSFIM #Winbond #SerialFlashMemory #NORFlash #SPIFlash #QuadSPI #QPI #DTR #EmbeddedSystems #NonVolatileMemory #FlashMemory #FirmwareStorage #IoT #IndustrialElectronics #Semiconductor #MemoryIC

Macronix MX66UM1G45G – 1 Gbit (128 MB) Octal SPI (xSPI) Serial NOR Flash memory designed for high-performance embedded systems. Supports Octal I/O interface for high-speed code execution, firmware storage, data logging, graphics assets, and external memory expansion. Features sector, block, and chip erase operations, page programming, status monitoring, low-power standby mode, and endurance of up to 100,000 program/erase cycles. Suitable for microcontrollers, processors, industrial systems, automotive electronics, networking equipment, IoT devices, HMI displays, and embedded Linux applications. Search Keywords: MX66UM1G45G, Macronix Flash Memory, Octal SPI Flash, OctaFlash, xSPI Flash, Serial NOR Flash, 1Gbit Flash Memory, 128MB Flash, External Flash Memory, Boot Flash, Firmware Storage, Execute In Place Flash, XIP Memory, High Speed Flash Memory, Embedded Storage, Industrial Flash Memory, Automotive Flash Memory, MCU External Memory, Processor Boot Memory, Non Volatile Memory MX66UM1G45G Hashtags: #MX66UM1G45G #Macronix #OctalSPI #OctaFlash #xSPI #NORFlash #SerialFlash #FlashMemory #ExternalMemory #NonVolatileMemory #FirmwareStorage #XIP #EmbeddedSystems #Microcontroller #IndustrialElectronics #AutomotiveElectronics #IoTDevices #ElectronicsDesign #PCBDesign #EmbeddedHardware

16GB SLC eMMC 5.1 FBGA-153(11.5x13) Memory RoHS eMMC embedded flash memory providing non-volatile data storage with a 16GB SLC capacity and eMMC 5.1 interface. It supports up to 210MB/s sequential read and 170MB/s sequential write speeds, operates with VCCQ of 1.7–1.95V or 2.7–3.6V and VCCF of 2.7–3.6V, and is specified for an operating temperature range of −40°C to +85°C. #eMMC #EmbeddedFlash #FlashMemory #SLC #eMMC5_1 #16GB #NonVolatileMemory #IndustrialTemperature #FBGA153 #MK

FLASH Memory IC 256Kbit Parallel 90 ns 32-PLCC (13.97x11.43) 256-Kbit parallel NOR Flash memory organized as 32K × 8, featuring 90 ns access time, 5 V-only operation, page programming, and hardware/software data protection. The AT29C256-90JI is suitable for firmware, program-code, configuration, and other non-volatile data storage in embedded and industrial systems; it uses a 32-pin PLCC package and operates from 4.5–5.5 V. #FlashMemory #NORFlash #NonVolatileMemory #ParallelMemory #PLCC #Microchip #AT29C256

16 GB eMMC Flash Memory IC – Embedded non-volatile NAND flash storage with an eMMC 5.1 interface, designed for embedded computing and digital systems requiring integrated mass storage. The Kingston EMMC16G-MW28-01E10 provides 16 GB NAND capacity, 200 MHz clock operation, 2.7–3.6 V supply, and an 8-bit memory interface. It uses TLC NAND flash technology in a 153-FBGA package (11.5 × 13 mm) and operates from −25°C to +85°C. #Kingston #EMMC16GMW2801E10 #eMMC #FlashMemory #NANDFlash #EmbeddedStorage #eMMC51 #MemoryIC #EmbeddedSystems #PCBComponents

8-bit Microcontrollers - MCU 5 Volt 8051 50 Mhz 32 kB flash 2.304 kB RAM 29 GPIO BB5 8-bit MCU 8-bit microcontroller designed for embedded control applications, featuring a CIP-51 (8051-compatible) core operating at up to 50 MHz. It integrates 32 KB Flash memory, 2.3 KB RAM, operates from a 1.8 V to 5.5 V supply, and includes 12-bit ADC, 10-bit DAC, SPI, 2× SMBus/I²C, 2× UART, four 16-bit timers, and 29 GPIOs in a 32-pin QFN package. #SiliconLabs #EFM8BB52 #Microcontroller #MCU #8051 #CIP51 #EmbeddedSystems #FlashMemory #QFN32 #SPI #I2C #SMBus #UART #ADC #DAC #GPIO

FLASH - NOR Memory IC 16Mbit SPI - Quad I/O 133 MHz 8-SOIC Serial NOR Flash Memory that provides non-volatile data storage using a SPI interface. The W25Q16JVSSIQ features 16-Mbit memory density, operates from a 2.7V to 3.6V supply voltage, supports standard SPI, Dual SPI, and Quad SPI interfaces, and provides clock frequencies up to 133 MHz in a 8-pin SOIC package. #FlashMemory #SPIFlash #NORFlash #NonVolatileMemory #Winbond #W25Q16JVSSIQ

FLASH - NOR Memory IC 128Mb (16M x 8) SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC 128M-bit Serial Flash Memory with uniform 4KB sectors and Dual/Quad SPI Winbond W25Q128JV is a 128-Mbit (16 MB) serial NOR Flash memory device designed for code and data storage in embedded systems. It supports standard SPI, Dual SPI, Quad SPI (QSPI), and Dual/Quad Peripheral Interface (DPI/QPI) modes, enabling high-speed data transfer rates up to 133 MHz clock operation and up to 532 MB/s equivalent throughput in Quad I/O DTR mode. The device supports Execute-In-Place (XIP), allowing processors and microcontrollers to run code directly from external flash memory without copying it to RAM. Features include 4 KB sector erase, 32 KB and 64 KB block erase, page programming, hardware/software write protection, security registers, JEDEC identification, SFDP support, suspend/resume operations, and low-power standby modes. Suitable for microcontrollers, FPGA configuration storage, IoT devices, industrial controllers, networking equipment, consumer electronics, and embedded systems requiring reliable non-volatile memory. Search Keywords: W25Q128JV, Winbond flash memory, SPI NOR Flash, QSPI Flash, Quad SPI memory, Serial Flash memory, 128Mbit Flash, 16MB Flash memory, Execute In Place XIP, external MCU flash, ESP32 flash memory, FPGA configuration memory, NOR flash storage, W25Q128, Dual SPI Flash, Quad I/O Flash, embedded nonvolatile memory, serial flash IC Hashtags: #W25Q128JV #Winbond #NORFlash #SPIMemory #QSPI #SerialFlash #FlashMemory #EmbeddedSystems #Microcontroller #ESP32 #FPGA #NonVolatileMemory #XIP #IoT #ElectronicsDesign #MemoryIC #FirmwareStorage #QuadSPI #EmbeddedHardware #ElectronicComponents