Automotive, 0 to 2-V input, precision reinforced isolated amplifier with integrated DC/DC converter Isolated amplifier providing precision isolated voltage sensing with a fixed gain of 1.0, featuring an integrated isolated DC/DC converter for single-supply operation from 3.0 V to 5.5 V. It supports a 0 V to 2 V input range, reinforced isolation rated for 4250 VRMS (UL1577) and 1200 VRMS working voltage, operates over −40°C to +125°C, and is housed in a 16-pin SOIC (DWE) package. #TexasInstruments #AMC3311Q1 #IsolatedAmplifier #IsolationAmplifier #VoltageSensing #IntegratedDCDC #AutomotiveElectronics #SOIC16 #PCBLibrary #ElectronicComponents

Buffer, Non-Inverting 1 Element 1 Bit per Element 3-State Output SOT-23-5 Single non-inverting tri-state buffer with a 3-state output, designed to buffer or isolate digital logic signals in automotive applications. It operates from a 4.5 V to 5.5 V supply, accepts TTL-compatible input levels, features an active-low output enable (OE), supports drive capability up to ±8 mA, and is specified for operation over a –40°C to +125°C temperature range in a SOT-23 (DBV) package. #LogicBuffer #TriStateBuffer #Automotive #AHCT #SingleGate #SOT23 #TexasInstruments

Diode 100V 1A Surface Mount SOD-123F #CommonPartsLibrary #TVS #Diodes

Automotive multiple power supply IC designed as a system basis chip for automotive electronics, integrating a switched-mode pre-regulator, three linear regulators, and a configurable 0.8 V to 5 V microcontroller core regulator with up to 1 A buck or 750 mA linear output. It operates from a 4.5 V to 19 V supply with boost (6 V to 19 V without boost), supports a 16-bit SPI interface, includes a 4-channel wheel speed sensor interface, 10-bit ADC, configurable watchdogs, high-side pre-drivers, and is housed in a 64-pin TQFP exposed-pad package. #AutomotiveIC #PowerManagementIC #SystemBasisChip #PMIC #SPI #WheelSpeedSensor #ADC #Watchdog #TQFP64 #STMicroelectronics

Isolation amplifier for precision measurement of high-voltage signals with reinforced capacitive isolation and a fully integrated isolated DC/DC converter. It supports differential input voltages up to ±1 V, provides a fixed gain of 2 V/V, operates from a 3 V to 5.5 V supply, offers ±1.5% maximum gain error and 100-kHz bandwidth, and is qualified for automotive applications in a 16-pin SOIC (DWV) package. #IsolationAmplifier #ReinforcedIsolation #IntegratedDCDC #DifferentialInput #HighVoltageSensing #PrecisionMeasurement #Automotive #AECQ100 #SOIC16 #TexasInstruments

PTC RESET FUSE 24V 500mA 1206 #commonpartslibrary #fuse #ptc #polymeric

3300µF 25V Aluminum Electrolytic Capacitors Radial, Can 10000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumelectrolytic #radial

15 Position FPC Connector Contacts, Bottom 0.039" (1.00mm) Surface Mount, Right Angle Connector 1.0mm, FFC/FPC r/a,SMT,ZIF,15w Molex FFC/FPC SMT Series 1mm Pitch 15 Way 1 Row Right Angle SMT Female FPC Connector, Tin Bismuth Alloy Plated Contacts

Connector Header Surface Mount, Right Angle 2 position 0.059" (1.50mm)

Connector Header Surface Mount, Right Angle 6 position 0.079" (2.00mm) Wire-to-board PCB header for mating with compatible Micro-Lock Plus connectors, featuring a 2.00 mm pitch, single-row, right-angle surface-mount configuration with 6 circuits. It supports a maximum voltage of 250 V, a maximum current of 3.0 A per contact, and an operating temperature range of -40°C to +105°C, with a positive-lock mating design and gold-plated contacts. #Connector #PCBConnector #WireToBoard #MicroLockPlus #Molex #SurfaceMount #RightAngle #6Pin

General ISM < 1GHz Z-Wave® Transceiver Module 863MHz ~ 870MHz, 902MHz ~ 928MHz Antenna Not Included Surface Mount

Red 617nm LED Indication - Discrete 1.9V Radial Light-emitting diode (LED) designed for visual indication and general illumination applications, featuring a high-efficiency red (GaAsP/GaP) emitter in a 5 mm (T-1 3/4) red diffused through-hole package. It operates at a typical forward current of 10 mA, provides 25 to 50 mcd luminous intensity, a 30° viewing angle, and a typical 625 nm dominant wavelength. #Kingbright #LED #HighEfficiencyRed #ThroughHole #THT #5mmLED #StatusIndicator #GaAsPGaP #30DegreeViewingAngle #625nm #ElectronicComponents

Battery Connector, Snap 9V 1 Cell PC Pin

Switching Voltage Regulators 2.5–5.5 V input, adjustable 0.6 V–VIN output, 2 A synchronous buck, forced PWM, 2.4 MHz typical, 23 µA typical quiescent current, 6-pin DRL/SOT-563 package.

Red, Green, Blue (RGB) 625nm Red, 520nm Green, 470nm Blue LED Indication - Discrete 5V Red, 5V Green, 5V Blue 4-SMD, No Lead

Efinix Titanium Ti375 industrial FPGA with 370K logic elements, quad-core RISC-V, 1,344 DSP blocks, 27.53 Mbit RAM, LPDDR4/4x, MIPI D-PHY, and high-speed transceivers; C529 529-ball FBGA, 19 × 19 mm, 0.8 mm pitch, −40°C to +100°C.

Voltage supervisor, designed to monitor the supply voltage and generate a reset signal when the monitored voltage falls below the specified threshold. The TLV840MADL29DBVR features a 2.9 V fixed threshold, manual reset (MR) input, active-low reset output, and is housed in a 5-pin SOT-23 (DBV) package, making it suitable for supply-voltage monitoring and reset generation in microprocessor and digital systems. #TexasInstruments #TLV840MADL29DBVR #VoltageSupervisor #ResetSupervisor #PowerMonitoring #VoltageMonitor #ActiveLowReset #ManualReset #SOT23 #DBV #PCB #Electronics #ComponentLibrary

Standard (General Purpose) Amplifier 2 Circuit 8-DIP Operational amplifier providing two independent, internally frequency-compensated op-amps for signal amplification and analog signal conditioning. The LM2904N operates from a 3 V to 26 V single supply or ±1.5 V to ±13 V dual supplies, features low supply current, an input common-mode voltage range including ground, and is designed for stable operation with internal frequency compensation in a PDIP-8 package. #OperationalAmplifier #DualOpAmp #AnalogIC #SignalConditioning #SingleSupply #DualSupply #PDIP8 #onsemi #LM2904N

FRAM (Ferroelectric RAM) Memory IC 256Kbit I2C 1 MHz 550 ns 8-SOP Ferroelectric RAM (FRAM) non-volatile memory providing 256 Kbit (32K × 8) of storage with a 2-wire I²C interface supporting clock frequencies up to 1 MHz (Fast-mode Plus). It operates from a 1.8 V to 5.5 V supply and is housed in an 8-pin SOP package, offering random read/write access and data retention without requiring a battery. #FRAM #NonVolatileMemory #I2C #256Kbit #RAMXEED

Temperature Sensor Analog, Local 0°C ~ 100°C 10mV/°C 8-SOIC The LM35DM/NOPB is a precision analog temperature sensor that provides an output voltage linearly proportional to Celsius (Centigrade) temperature at 10 mV/°C. It operates from a 4 V to 30 V supply, measures temperatures from −55°C to +150°C, draws typically less than 60 µA supply current, and is housed in an 8-pin SOIC (D) package. #TemperatureSensor #AnalogSensor #PrecisionSensor #TexasInstruments #LM35 #SOIC8

Digital Signal Controllers Digital Signal Processor (DSP) 80-TQFP (12x12) Digital signal controller (DSC) designed for real-time embedded control applications, integrating a 16-bit dsPIC® CPU with 256 KB Flash memory and high-speed DSP capabilities. It operates at up to 100 MIPS, supports 3.0 V to 3.6 V operation, and includes peripherals such as 12-bit ADCs, PWM modules, CAN FD, UART, SPI, I²C, DMA, and USB support (device-dependent). The DSPIC33CK256MP508-I/PT is provided in a 64-pin TQFP package and is suitable for motor control, digital power, and industrial control applications. #Microcontroller #DigitalSignalController #dsPIC33CK #Microchip #MotorControl #EmbeddedSystems

Voltage Level Translator Bidirectional 1 Circuit 8 Channel 110Mbps 20-NFBGA (2.5x3)

Capacitive Touch Sensor Controller for projected capacitive (PCAP) touch panels, supporting up to 40 touch channels with USB, I²C, and UART host interfaces. The ILI2511 operates from a 3.3 V supply, integrates touch sensing, signal processing, and host communication in a single chip, and is housed in an 88-pin QFN package for industrial, POS, and ATM touch applications. #ILITEK #ILI2511 #CapacitiveTouchController #TouchController #PCAP #USB #I2C #UART #QFN88 #HumanMachineInterface #EmbeddedSystems #PCBLibrary

8 Channel AFE 24 Bit 42 mW 64-TQFP (10x10) Analog front-end (AFE) for biopotential measurements, designed to acquire low-amplitude signals such as EEG and other electrophysiological data. It integrates eight simultaneous 24-bit delta-sigma ADCs with programmable gain amplifiers (gains of 1, 2, 4, 6, 8, 12, and 24), supports a 2.7 V to 5.25 V analog supply and a 1.65 V to 3.6 V digital supply, communicates through an SPI-compatible interface, and is housed in a 64-pin TQFP package. Hashtags: #AnalogFrontEnd #AFE #Biopotential #EEG #24BitADC #DeltaSigmaADC #ProgrammableGainAmplifier #SPI #EightChannel #TQFP64 #TexasInstruments #MedicalElectronics #ADS1299

47µF 16V MUSE Aluminum Electrolytic Capacitors Radial, Can 1000 Hrs @ 85°C#CommonPartsLibrary #Capacitor #Aluminum #Eletrolytic

USB - mini B USB 2.0 Receptacle Connector 5 Position Through Hole, Right Angle Mini USB 2.0 Type B receptacle connector for USB data and power connections in through-hole PCB applications. It features a 5-contact, right-angle through-hole configuration with USB 2.0 support up to 480 Mb/s, a 30 VDC voltage rating, 1.8 A current rating, dielectric withstand voltage of 100 VAC RMS, and an operating temperature range of -40°C to +85°C. #MiniUSB #USB2_0 #TypeB #Receptacle #ThroughHole #RightAngle #5Pin #AmphenolICC #Connector #480Mbps #30V #1_8A

USB - micro B USB 3.2 Gen 1 (USB 3.1 Gen 1, Superspeed (USB 3.0)) Receptacle Connector 10 Position Surface Mount, Right Angle; Through Hole #USBMicroB #USB31 #SMT #RightAngle #AmphenolICC #Connector

USB-A (USB TYPE-A) USB 3.2 Gen 1 (USB 3.1 Gen 1, Superspeed (USB 3.0)) Receptacle Connector 9 Position Through Hole, Right Angle USB Type-C receptacle connector designed to provide a USB 3.1 Gen 1 interface for power delivery and high-speed data transmission. The GSB311131HR features a right-angle, SMT mounting configuration with a 24-contact receptacle, supports up to 5 A current, USB 3.1 Gen 1 data rates up to 5 Gb/s, and is rated for 10,000 mating cycles. #USBTypeC #USB31Gen1 #ReceptacleConnector #AmphenolICC #SMT #RightAngle #24Pin #5Gbps #5A #PCBConnector

PANASONIC - EEUFR1H331LB - Electrolytic Capacitor, 330 F, 50 V, FR Series, +/- 20%, Radial Leaded, 10 mm

Switching Voltage Regulators 95nA quiescent current, 5.5V boost converter with input current limit and fast transient performance