REED SW, SPST, 10AT-15AT, 0.25A, 170VDC; Product Range:MISM-7 Series; Contact Configuration:SPST-NO; Switch Mounting:Surface Mount; Contact Current Max:250mA; Switching Voltage Max:170VDC; Switching Power Max:10W; Operate AT Min:10AT Littelfuse MISM-7R5-10-15 / MISM-7R-10-15 Littelfuse MISM-7R5-10-15 MISM-7R-10-15

NEO-7 RF Receiver GLONASS, GNSS, GPS 1.575GHz -161dBm

Analog Devices AD74413R is a quad-channel software-configurable analog and digital input/output (I/O) controller designed for industrial automation, process control, building management, and smart sensing systems. Each channel can be independently configured as voltage input, current input, voltage output, current output, digital input, RTD temperature measurement, or thermocouple interface, enabling highly flexible universal I/O architectures. The device integrates four 16-bit sigma-delta ADCs, four 13-bit DACs, precision voltage references, diagnostics, open-circuit and short-circuit detection, internal temperature monitoring, and HART communication support. Communication with the host processor is performed through an SPI interface. The AD74413R simplifies PLC, DCS, remote I/O, industrial sensor, actuator, and process instrumentation designs by replacing multiple dedicated analog front-end components with a single programmable I/O solution. Search Keywords: AD74413R, Analog Devices universal I/O, software configurable I/O, industrial I/O controller, analog input output IC, programmable PLC I/O, process control interface, RTD measurement IC, thermocouple interface IC, HART compatible I/O, SPI industrial interface, voltage input output controller, current loop controller, universal analog front end, remote I/O module IC, industrial automation controller AD74413R Hashtags: #AD74413R #AnalogDevices #UniversalIO #IndustrialAutomation #ProcessControl #PLC #RemoteIO #HART #RTD #Thermocouple #AnalogInput #AnalogOutput #CurrentLoop #IndustrialElectronics #SPIInterface #DAC #ADC #BuildingAutomation #Instrumentation #ElectronicComponentsQuad-Channel, Software Configurable Input and Output

Coilcraft NA5889-AL is a high-frequency isolated flyback transformer designed specifically for Texas Instruments TPS55340 Boost/SEPIC/Flyback DC-DC converter applications. Optimized for operation around 200 kHz with input voltages from 2.9 V to 32 V, it provides galvanic isolation of up to 1500 Vrms between primary and secondary windings. The transformer features ferrite core construction, low primary DCR, tightly controlled turns ratio, and compact surface-mount packaging. It is intended for isolated power supply designs requiring efficient energy transfer, compact size, and reliable operation in industrial, embedded, communication, instrumentation, and power conversion applications. Typical output configuration supports isolated 12 V at 1 A when used in the reference TPS55340 flyback design. Search Keywords: NA5889-AL, Coilcraft flyback transformer, TPS55340 transformer, isolated DC-DC transformer, flyback converter transformer, SMPS transformer, power transformer SMD, 1500Vrms isolation transformer, Coilcraft NA5889, flyback magnetics, isolated power supply transformer, ferrite transformer, switch mode power supply transformer, DC DC converter magnetics, TPS55340 flyback design Hashtags: #NA5889AL #Coilcraft #FlybackTransformer #Transformer #SMPS #DCDCConverter #TPS55340 #PowerElectronics #IsolatedPowerSupply #Magnetics #FerriteCore #EmbeddedPower #IndustrialElectronics #PowerSupplyDesign #SwitchingPowerSupply #ElectronicsDesign #PowerConversion #SMDTransformer #ElectronicComponents #HardwareDesign

FLASH - NOR Memory IC 128Mb (16M x 8) SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC 128M-bit Serial Flash Memory with uniform 4KB sectors and Dual/Quad SPI Winbond W25Q128JV is a 128-Mbit (16 MB) serial NOR Flash memory device designed for code and data storage in embedded systems. It supports standard SPI, Dual SPI, Quad SPI (QSPI), and Dual/Quad Peripheral Interface (DPI/QPI) modes, enabling high-speed data transfer rates up to 133 MHz clock operation and up to 532 MB/s equivalent throughput in Quad I/O DTR mode. The device supports Execute-In-Place (XIP), allowing processors and microcontrollers to run code directly from external flash memory without copying it to RAM. Features include 4 KB sector erase, 32 KB and 64 KB block erase, page programming, hardware/software write protection, security registers, JEDEC identification, SFDP support, suspend/resume operations, and low-power standby modes. Suitable for microcontrollers, FPGA configuration storage, IoT devices, industrial controllers, networking equipment, consumer electronics, and embedded systems requiring reliable non-volatile memory. Search Keywords: W25Q128JV, Winbond flash memory, SPI NOR Flash, QSPI Flash, Quad SPI memory, Serial Flash memory, 128Mbit Flash, 16MB Flash memory, Execute In Place XIP, external MCU flash, ESP32 flash memory, FPGA configuration memory, NOR flash storage, W25Q128, Dual SPI Flash, Quad I/O Flash, embedded nonvolatile memory, serial flash IC Hashtags: #W25Q128JV #Winbond #NORFlash #SPIMemory #QSPI #SerialFlash #FlashMemory #EmbeddedSystems #Microcontroller #ESP32 #FPGA #NonVolatileMemory #XIP #IoT #ElectronicsDesign #MemoryIC #FirmwareStorage #QuadSPI #EmbeddedHardware #ElectronicComponents

CONN HEADER 40POS DL STR GOLD 3M 303 Series, 2.54mm Pitch 40 Way 2 Row Shrouded Straight PCB Header, Through Hole, Solder Termination 3M 303 Series low-profile board-to-board/socket header connector with 2.54 mm (0.100") pitch, available in straight and right-angle versions. Designed as a low-cost, rugged female header solution for PCB interconnection in embedded systems, development boards, industrial electronics, communication equipment and general-purpose electronic assemblies. Features brass contacts with nickel underplating and gold flash contact finish, glass-filled polyester (PBT) housing rated UL94V-0, orientation marking triangle, end windows for alignment, and compatibility with standard 0.64 mm (0.025") square pin headers. Rated for 1 A current, 500 V insulation withstand voltage, and operation from -55°C to +105°C. Search Keywords: 3M 303 Series, low profile header, female header connector, 2.54mm socket header, 0.100 inch connector, board to board connector, PCB socket connector, right angle header, straight header connector, through hole socket strip, gold flash socket header, 3M header connector, female pin header, electronic connector, embedded system connector Hashtags: #3M #303Series

Hi-Link DC power supply module 1D1212 DC-DC isolation module 12V to 12V1W isolation module HLK-B1212S-1WR3 B1212S SIP-6 dual-output isolated DC-DC converter

ARM Cortex-M55 processor, WLCSP65: 2.3mm x 5.6mm, Core 0.8/0.9V, up to 400MHz, Dynamic Voltage Frequency Scaling

Comparator Standard (General Purpose) Open-Collector, Rail-to-Rail 8-PDIP LM393 LM393 DIP-8 / PDIP-8

Microchip dsPIC33EVXXXGM00X/10X family, 16-bit Digital Signal Controller (DSC) operating from a 5V supply, combining a high-performance dsPIC33E CPU core with advanced motor-control PWM peripherals and mixed-signal analog functionality. Supports up to 70 MIPS performance, hardware DSP engine, dual accumulators, hardware multiply/divide operations, and fast context switching. Features up to six PWM outputs for motor control, power conversion, PFC, lighting and industrial automation. Includes high-speed 12-bit ADC, multiple operational amplifiers, comparators, DAC functions, CTMU touch sensing, temperature measurement, watchdog timers, programmable clock sources and extensive power management modes. Suitable for motor drives, digital power supplies, industrial control, robotics, automotive electronics and embedded signal processing applications. Search Keywords: dsPIC33EV, dsPIC33EV256GM, dsPIC33EV128GM, Microchip DSC, Digital Signal Controller, 16-bit DSP MCU, motor control MCU, digital power controller, 5V microcontroller, PWM controller, high-speed ADC MCU, industrial controller MCU, brushless motor controller, BLDC controller, PMSM controller, power conversion MCU, embedded DSP processor, dsPIC33E family Hashtags: #dsPIC33EV #Microchip #DigitalSignalController #DSP #MotorControl #BLDC #PMSM #DigitalPower #PowerElectronics #IndustrialAutomation #EmbeddedSystems #Microcontroller #PWMController #ADC #Robotics #MixedSignalMCU #dsPIC33E #EmbeddedDSP #ControlSystems #PowerConversion TQFP-64 Microchip E DSPIC33EV256GM106-I/PT Good

Zilog Z80 microprocessor family, fourth-generation enhanced 8-bit CPU architecture with high computational performance and efficient memory utilization. Features two complete sets of general-purpose registers (main and alternate register banks) for fast context switching, two 16-bit index registers (IX and IY), stack pointer, program counter, refresh register, and interrupt register. Supports a single +5V power supply and interfaces directly with standard memory and peripheral devices. Includes advanced interrupt handling, daisy-chain interrupt capability, and built-in dynamic RAM refresh support. Widely used in industrial control systems, embedded equipment, terminals, instrumentation, retro computers, and communication devices. Search Keywords: Z80 CPU, Zilog Z80, Z84C00, Z8400, 8-bit microprocessor, enhanced Z80 processor, DIP40 CPU, CMOS Z80, NMOS Z80, embedded processor, industrial controller CPU, retro computer processor, vintage microprocessor, dynamic RAM refresh CPU, interrupt controller compatible CPU Hashtags: #Z80 #Zilog #Z84C00 #Z8400 #8BitCPU #Microprocessor #EmbeddedSystems #IndustrialElectronics #RetroComputing #VintageComputing #DIP40 #ComputerArchitecture #DigitalElectronics #CPU #ClassicComputingMicroprocessors - MPU 6MHz Z80 CMOS CPU XT

Connector Header Through Hole 64 position 0.100" (2.54mm)

Diode RF 65V 2-Pin DO-7 1N34A germanium signal diode in DO-7 glass package, optimized for radio-frequency (RF) detection and low-voltage signal rectification. Features low forward voltage drop, low leakage current, low junction capacitance, and fast response characteristics. Rated for up to 65V peak inverse voltage (PIV), 50mA average rectified current, and 200mA repetitive forward surge current. Commonly used in AM/FM detectors, crystal radios, RF probes, envelope detectors, vintage audio circuits, TV/FM discriminator stages, and guitar distortion effects. Search Keywords: 1N34A, 1N34A germanium diode, germanium signal diode, DO-7 diode, RF detector diode, AM detector diode, FM detector diode, crystal radio diode, low forward voltage diode, vintage germanium diode, RF probe diode, envelope detector diode, audio clipping diode, germanium rectifier diode Hashtags: #1N34A #GermaniumDiode #RFDiode #SignalDiode #DO7Package #CrystalRadio #AMDetector #FMDetector #EnvelopeDetector #LowForwardVoltage #VintageElectronics #RFProbe #AudioEffects #GuitarPedal #RectifierDiode

DC Power Receptacle Jack, Through Hole，Right Angle Best Inc. Conn Dc Power Jack 2.1mm DC-005 DC-005 5.5/2.1mm ≥5A PCB barrel jack

E22-900T22D Ebyte whole new 22dBm Lora wireless serial port module with customized development services,3.3V and 5V IO port voltage

MKDS 1/13-3,5 - Printed circuit board terminal, nominal current: 17.5 A, rated voltage (III/2): 200 V, nominal cross section: 1.5 mm², number of potentials: 13, number of rows: 1, number of positions per row: 13, product range: MKDS 1, pitch: 3.5 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, mounting: Wave soldering, conductor/PCB connection direction: 0 , color: green, Pin layout: Linear pinning, Solder pin [P]: 3.5 mm, number of solder pins per potent 13-position 3.5mm screw terminal block

Connector Header Through Hole, Right Angle 14 position 0.079" (2.00mm) 14-pin 2x7 2.00mm TH male shrouded JTAG box header

SiTime SiT5356 precision MEMS Super-TCXO oscillator, ±100ppb stability over temperature, programmable frequency from 1MHz to 60MHz in 1Hz steps, ultra-low ±1ppb/°C frequency slope, excellent dynamic stability under airflow, thermal shock, vibration and board bending, integrated regulators for noise filtering, optional TCXO/VCTCXO/DCTCXO configurations, I2C digital frequency pulling option with up to ±3200ppm pull range, LVCMOS or clipped sinewave output, 2.5V/2.8V/3.0V/3.3V supply options, -40°C to +105°C operating range, suitable for 4G/5G radio, GNSS, SyncE, IEEE1588 timing, routers, switches and test equipment. Search Keywords: SiT5356, SiTime SiT5356, MEMS Super-TCXO, precision TCXO, ±100ppb TCXO, programmable TCXO, DCTCXO, VCTCXO, TCXO oscillator, 1MHz to 60MHz oscillator, I2C frequency pulling oscillator, GNSS oscillator, IEEE1588 oscillator, SyncE oscillator, telecom timing oscillator Hashtags: #SiT5356 #SiTimeSiT5356 #SuperTCXO #MEMSOscillator #PrecisionTCXO #ProgrammableOscillator #DCTCXO #VCTCXO #GNSSOscillator #TelecomTiming #IEEE1588 #SyncE #ClockReference #LVCMOSOscillator

ADS1115 series 16 Bit 860 Samples per Second Analog to Digital Converter (ADC) Evaluation Board Adafruit 1085 ADS1115 Adafruit 4-Channel ADC Breakout based on Texas Instruments ADS1115 (16-bit) or ADS1015 (12-bit) analog-to-digital converter, featuring I2C communication, four single-ended inputs or two differential inputs, programmable gain amplifier (PGA) up to x16, internal voltage reference, programmable comparator, and selectable I2C addresses (0x48–0x4B). Operates from 2.0V to 5.5V and supports interfacing analog sensors with 3.3V and 5V microcontrollers such as Arduino, ESP32, STM32, RP2040, and Raspberry Pi. Search Keywords: Adafruit 4-Channel ADC Breakout, ADS1115 Breakout, ADS1015 Breakout, Adafruit ADS1115, Adafruit ADS1015, I2C ADC Module, 16-bit ADC, 12-bit ADC, 4-channel ADC, differential ADC, programmable gain amplifier, PGA ADC, analog sensor interface, TI ADS1115, TI ADS1015, Raspberry Pi ADC, Arduino ADC module, ESP32 ADC expansion Hashtags: #Adafruit #ADS1115 #ADS1015 #ADCModule #I2CADC #16BitADC #12BitADC #AnalogToDigitalConverter #SensorInterface #DifferentialADC #PGA #Arduino #ESP32 #STM32 #RP2040 #RaspberryPi #DataAcquisition #EmbeddedSystems #AdafruitBreakout

Ground Isolation Amplifier

TOUCH PAD DETECTOR IC

40-W AC-DC isolated power supply for industrial application. This power supply provides 40W isolated 24-V and 5-V output with fly-back topology. The power supply can be powered from 90-264VAC Input. This design uses valley switching fly-back controller UCC28740 controller.

40-W AC-DC isolated power supply for industrial application. This power supply provides 40W isolated 24-V and 5-V output with fly-back topology. The power supply can be powered from 90-264VAC Input. This design uses valley switching fly-back controller UCC28740 controller.

Maxim Integrated PLL Frequency Synthesizer Single 23.5MHz to 6000MHz 32-Pin TQFN EP QFN-32 Maxim None MAX2871ETJ+ Unavailable Maxim Integrated MAX2871 ultra-wideband fractional-N / integer-N PLL frequency synthesizer with integrated VCOs, capable of generating RF frequencies from 23.5MHz to 6.0GHz. Features programmable output dividers (1/2/4/8/16/32/64/128), dual differential RF outputs with programmable output power from -1dBm to +8dBm, low phase noise performance, phase frequency detector up to 140MHz, reference frequency up to 210MHz, fast lock and cycle-slip reduction, automatic/manual VCO selection, on-chip temperature sensor with 7-bit ADC, 4-wire SPI-compatible serial interface, and operation from -40°C to +85°C. Suitable for wireless infrastructure, clock generation, microwave radios, RF signal generation, and test & measurement equipment. MAX2871 Search Keywords: MAX2871, Maxim MAX2871, Analog Devices MAX2871, PLL synthesizer, RF synthesizer, fractional N synthesizer, integer N synthesizer, 6GHz frequency synthesizer, RF signal generator IC, integrated VCO synthesizer, microwave synthesizer, SPI frequency synthesizer, dual output PLL, clock generation IC, wireless infrastructure synthesizer Hashtags: #MAX2871 #MaximIntegrated #AnalogDevices #PLLSynthesizer #FrequencySynthesizer #RFSynthesizer #FractionalNPLL #IntegerNPLL #IntegratedVCO #RFSignalGenerator #MicrowaveRadio #ClockGeneration #WirelessInfrastructure #SPIInterface #TestAndMeasurement #RFDesign #RFIC #PhaseLockedLoop

18 Ohms ±5% 0.4W Through Hole Resistor Axial Metal Film

1.5 kOhms ±5% 10W Through Hole Resistor Axial Flame Proof, Pulse Withstanding, Safety Cement

RNF14FTD10K2

750 kOhms ±0.5% 0.333W, 1/3W Chip Resistor 1206 (3216 Metric) Automotive AEC-Q200, High Voltage, Moisture Resistant Thick Film HV73V2BTTD7203D

LED Lighting Driver ICs 4-channel I2C interf ace RGBW LED driver Texas Instruments LP5816 4-channel I2C RGBW LED driver, 2.5V to 5.5V VCC range, logic input compatible with 1.8V/3.3V/5V, output voltage up to 5.5V, four high-precision constant-current sinks with 0.1mA to 51mA per channel, analog dimming and 8-bit PWM dimming up to 23kHz, 400kHz I2C interface, ultra-low power operation with 0.1µA shutdown current and 0.2mA typical active current at 25.5mA LED current, ESD protection, -40°C to +125°C operating range, available in SOT583-8 and DSBGA-8 packages. Search Keywords: LP5816, Texas Instruments LP5816, TI LP5816, LP5816 RGBW LED driver, 4 channel LED driver, I2C LED driver, RGBW LED driver IC, constant current LED driver, 51mA LED driver, 8-bit PWM LED driver, analog dimming LED driver, LP5816DLR, LP5816YCHR, SOT583-8 LED driver, DSBGA-8 LED driver Hashtags: #LP5816 #TexasInstrumentsLP5816 #TILEDDriver #RGBWLEDDriver #LEDDriverIC

InvenSense MPU-60X0 / MPU-6000 / MPU-6050 6-axis MotionTracking IMU, integrating 3-axis gyroscope, 3-axis accelerometer and Digital Motion Processor (DMP) in a compact 4 x 4 x 0.9mm QFN package. Features programmable gyroscope ranges ±250/±500/±1000/±2000 dps, programmable accelerometer ranges ±2g/±4g/±8g/±16g, 16-bit ADCs, 1024-byte FIFO, embedded temperature sensor, I2C interface up to 400kHz and SPI interface up to 1MHz/20MHz on MPU-6000, 2.375V to 3.46V supply range, designed for motion sensing, gesture control, image stabilization, navigation, wearables, smartphones, tablets and embedded motion-control applications. Search Keywords: MPU-60X0, MPU-6000, MPU-6050, InvenSense MPU-6050, InvenSense MPU-6000, 6-axis IMU, 3-axis gyroscope accelerometer, MotionTracking sensor, Digital Motion Processor, DMP IMU, I2C IMU sensor, SPI IMU sensor, MPU6050 accelerometer gyroscope, MPU6000 gyro, QFN 4x4mm IMU, motion sensor module Hashtags: #MPU60X0 #MPU6000 #MPU6050 #InvenSenseMPU6050 #IMUSensor #6AxisIMU #Accelerometer #Gyroscope #MotionTracking #DigitalMotionProcessor #DMP #I2CSensor #SPISensor #MotionSensor #QFN24