14VC Clamp 2.5A@8/20us Ipp TVS DIODE USON-10(1x2.5) The TPDxE05U06 is a family of unidirectional Transient Voltage Suppressor (TVS) based Electrostatic Discharge (ESD) protection diodes with ultra-low capacitance. Each device can dissipate ESD strikes above the maximum level specified by the IEC 61000-4-2 international standard. The TPDxE05U06s ultra-low loading capacitance makes it ideal for protecting any high-speed signal pins. Typical applications for TPDxE05U06 includes high speed signal lines in HDMI 1.4b, HDMI 2.0, USB 3.0, MHL, LVDS, DisplayPort, PCI-Express® , eSata, and V-by-One® HS. Features • IEC 61000-4-2 Level 4 ESD Protection – ±12-kV Contact Discharge – ±15-kV Air Gap Discharge • IEC 61000-4-4 EFT Protection – 80 A (5/50 ns) • IEC 61000-4-5 Surge Protection – 2.5 A (8/20 µs) • IO Capacitance 0.42 pF to 0.5 pF (Typical) • DC Breakdown Voltage 6.5 V (Minimum) • Ultra low Leakage Current 10 nA (Maximum) • Low ESD Clamping Voltage • Industrial Temperature Range: –40°C to +125°C • Easy Straight-Through Routing Packages Application • HDMI 1.4b • HDMI 2.0 • USB 3.0 • MHL • LVDS Interfaces • DisplayPort • PCI-Express® • eSata Interfaces • V-by-One® HS #Commonpartlibrary #TVS diode #Circuit Protection

Electronic Fuse Regulator 4A 8-WSON (2x2) The TPS259530DSGR is a compact, integrated eFuse protection device designed to provide robust power-path management for low-voltage DC systems, particularly nominal five-volt rails. It combines multiple protection and control features into a single solution, enabling safe distribution of power to downstream circuitry while minimizing the need for external components. The device supports controlled inrush current during startup, continuous current monitoring, and rapid fault response to protect both the power source and the load. Integrated protection mechanisms include overvoltage protection, undervoltage lockout, overcurrent limiting, thermal shutdown, and reverse current blocking. This makes the device well suited for applications requiring high reliability, such as embedded systems, industrial electronics, consumer devices, and communication equipment. Functional Description The device operates as a high-side protection switch using an internal MOSFET to control current flow from the input supply to the load. It monitors input voltage, output current, and internal temperature to ensure operation within safe limits. When a fault condition such as overcurrent or overvoltage is detected, the device limits or interrupts current flow to prevent damage. The integrated control loop provides smooth startup by limiting inrush current and preventing supply droop. Reverse current blocking prevents unwanted current flow from the output back to the input when the input supply is removed or drops below the output level. Electrical Characteristics The device supports operation across a wide input voltage range suitable for low-voltage DC systems, including typical five-volt rails. It features an adjustable overvoltage protection threshold aligned with five-volt system requirements, along with configurable undervoltage lockout to ensure proper system startup and shutdown behavior. The current limit is externally programmable, allowing flexibility for different load conditions. The device exhibits low on-resistance to minimize power dissipation and voltage drop during normal operation. Protection Features The TPS259530DSGR integrates multiple protection functions to enhance system robustness. Overvoltage protection prevents excessive input voltage from reaching the load. Undervoltage lockout ensures the device only operates when the input supply is within a valid range. Overcurrent protection actively limits current during fault conditions and can respond rapidly to short circuits. Thermal shutdown protects the device from overheating by disabling operation when internal temperature exceeds safe limits. Reverse current blocking prevents backflow of current, safeguarding both the source and load. Control and Interface The device includes an enable control input that allows external control of the power path. It supports configurable behavior for fault response and recovery, depending on system design. External components can be used to set thresholds such as current limit and undervoltage lockout, providing design flexibility. Status signaling allows system-level monitoring of fault conditions. Mechanical and Package Information The TPS259530DSGR is provided in a compact surface-mount package suitable for space-constrained applications. The package is optimized for thermal performance and efficient PCB layout, enabling reliable operation under varying load conditions. It is supplied in tape-and-reel format for automated assembly processes. Applications This device is intended for use in systems requiring reliable power distribution and protection. Typical applications include five-volt power rails in embedded systems, industrial control modules, consumer electronics, communication devices, and peripheral power management circuits. Summary The TPS259530DSGR offers an integrated, high-reliability solution for power path protection and management in low-voltage systems. Its combination of protection features, configurability, and compact form factor makes it a widely used choice for safeguarding five-volt supply rails in modern electronic designs. #commonpartslibrary #integratedcircuit #powermanagement

Counters / Dividers CD4060BMT SOIC-16_L9.9-W3.9-P1.27-LS6.0-BL LCSC Part Number: C1848233 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

14V Clamp 2.5A (8/20µs) Ipp Tvs Diode Surface Mount 2-X1SON (1x.60) TVS diode USB VBUS 5V TVS diode USB VBUS 5V ESD protection General Description The TPD1E05U06DPYR is a single-channel transient voltage suppression device designed to protect sensitive electronic components from electrostatic discharge (ESD) and other transient voltage events. It is engineered for high-speed signal applications, offering low capacitance to preserve signal integrity while providing robust protection. The device is suitable for integration into compact and portable electronic systems where space, reliability, and performance are critical. Device Identification Part number: TPD1E05U06DPYR Device classification: ESD protection diode / transient voltage suppressor Manufacturer: Commonly associated with Texas Instruments Mounting type: Surface-mount Package style: Ultra-small leadless package (e.g., X2SON/DFN) Functional Description Protects circuits from high-voltage transients caused by ESD events Limits voltage spikes by clamping them to safe levels Maintains signal quality by minimizing added capacitance Operates transparently under normal signal conditions Provides fast response to transient disturbances Performance Characteristics Low capacitance suitable for high-speed data lines High ESD protection capability compliant with standard test models Low leakage current during normal operation Fast transient response time Stable performance across specified operating conditions Electrical Characteristics Designed for low-voltage applications (approximately 5 V working range) Low clamping voltage to protect downstream components Minimal dynamic resistance Very low input/output capacitance High reliability under repeated ESD stress Application Scope High-speed communication interfaces such as USB, HDMI, and display ports Mobile phones, tablets, and wearable electronics Embedded systems and microcontroller interfaces Consumer and industrial electronic equipment Data and signal line protection in compact devices Mechanical and Physical Properties Compact footprint for high-density PCB layouts Leadless package for improved mechanical robustness Compatible with standard surface-mount assembly processes Designed for automated manufacturing environments Integration Guidelines Install as close as possible to the external connector or entry point Ensure a low-impedance path to ground for optimal protection Minimize trace length between the device and the protected line Consider layout practices to preserve high-speed signal integrity Verify compatibility with system voltage and interface requirements #commonpartslibrary #circuitprotection #tvsdiode

MOSFETs TK10A80E.S4X TO-220-3_L10.0-W4.5-P2.54-L LCSC Part Number: C2762707 JLCPCB Part Class: Extended Part Manufactured by TOSHIBA(东芝)

Suppression Capacitors MPX334K31B9KN20600 CAP-TH_L10.0-W6.0-P7.50-D0.6 LCSC Part Number: C2981464 JLCPCB Part Class: Extended Part Manufactured by KNSCHA(科尼盛)

ZH 1.5MM HEADER TOP ENTRY 02WAY JST ZH Series, 1.5mm Pitch 2 Way 1 Row Shrouded Top Entry PCB Header, Through Hole, Solder Termination Wire To Board / Wire To Wire Connector B2B-ZR-SM4-TFT(LF)(SN) CONN-SMD_B2B-ZR-SM4-TFT-LF-SN LCSC Part Number: C265004 JLCPCB Part Class: undefined Manufactured by JST B2B-ZR

2.4GHz -98dBm SMD,19.2x18mm RF Transceiver Modules and Modems RoHS The ESP32-WROOM-32UE-N16 is a 2.4 GHz wireless MCU module built around the ESP32 SoC. It combines a dual-core processor, integrated Wi-Fi (802.11 b/g/n) and Bluetooth 4.2 (Classic + BLE), along with rich peripherals. The “UE” variant specifically uses a U.FL / IPEX connector for an external antenna, making it ideal for applications that require better RF performance or flexible antenna placement (e.g., enclosed products or long-range communication). The “N16” indicates 16 MB external flash memory, suitable for large firmware, OTA updates, and data-heavy applications. Processing Dual-core Xtensa LX6 32-bit CPU Clock speed up to 240 MHz Memory 16 MB Flash (N16 variant) ~520 KB SRAM + 448 KB ROM Connectivity Wi-Fi: 802.11 b/g/n (up to 150 Mbps) Bluetooth: v4.2 (BR/EDR + BLE) Frequency: 2.4 GHz band Antenna External antenna via U.FL connector Better range and flexibility vs PCB antenna Interfaces / Peripherals GPIO (≈26 usable pins) UART, SPI, I2C, I2S, SDIO ADC, DAC PWM (LED & motor control) Capacitive touch sensing Security Hardware encryption: AES, SHA, RSA Secure boot & flash encryption support Power Operating voltage: 3.0V – 3.6V (typ. 3.3V) Multiple low-power modes for battery applications Environmental Operating temperature: -40°C to +85°C Physical Surface-mount module (~38 pins / 52 pads depending on reference) Compact and RF-shielded design Typical Applications Smart home devices (IoT) Industrial automation Wireless sensors and data loggers Wearables and consumer electronics Remote monitoring systems #Module #ESP32

Linear Voltage Regulator IC Positive Fixed 1 Output 1.2A TO-220 62dB@(120Hz) 1.5A Fixed 5V Positive electrode 35V TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS L7805CV TO-220-3_L10.0-W4.5-P2.54-L LCSC Part Number: C347289 JLCPCB Part Class: Extended Part Manufactured by UMW(友台半导体)

300mA, Low Quiescent Current, Fast Transient, Low Dropout Linear Regulator Linear Voltage Regulators (LDO) AP7333-33SAG-7 SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR LCSC Part Number: C150746 JLCPCB Part Class: Extended Part Manufactured by DIODES(美台)

52dB@(1kHz) 1A Fixed 3.3V Positive electrode 5.5V SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS TLV75733PDBVR SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BL LCSC Part Number: C485517 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

WiFi 802.11a/b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace The ESP32-S3-WROOM-1-N8R2 is a compact, low-power Wi-Fi and Bluetooth® Low Energy (BLE) module developed by Espressif Systems. It is based on the ESP32-S3 system-on-chip (SoC), which integrates a dual-core Xtensa® LX7 processor optimized for high performance and edge AI processing. This module includes 8 MB of external SPI flash memory and 2 MB of PSRAM, enabling efficient handling of memory-intensive applications such as graphical interfaces, buffering, and embedded machine learning workloads. Designed for flexibility and scalability, the module integrates RF components, power management, and a wide range of peripherals into a surface-mount package suitable for IoT, industrial, and consumer electronics applications. Key Features Dual-core Xtensa® LX7 processor operating up to 240 MHz Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 Low Energy support Embedded 8 MB SPI flash memory Integrated 2 MB PSRAM AI acceleration through vector instruction support USB OTG (full-speed) capability Multiple low-power operating modes Built-in hardware security features Extensive peripheral interface support Functional Overview The module consists of several integrated subsystems, including a dual-core processing unit, memory subsystem (flash and PSRAM), RF subsystem for wireless communication, peripheral interface controllers, power management circuitry, and a hardware-based security engine. Electrical Characteristics Operating voltage range: 3.0 V to 3.6 V (typical 3.3 V) Operating temperature range: -40°C to +85°C RF operating frequency: 2.4 GHz Current consumption varies depending on operating mode, ranging from microamp levels in deep sleep to hundreds of milliamps during active transmission Processor and Memory The module features a dual-core Xtensa® LX7 CPU capable of running at frequencies up to 240 MHz. It includes approximately 512 KB of internal SRAM, supplemented by 8 MB of external flash memory and 2 MB of PSRAM for extended data storage and processing. Wireless Connectivity The ESP32-S3-WROOM-1-N8R2 supports Wi-Fi communication compliant with 802.11 b/g/n standards in the 2.4 GHz band. It also supports Bluetooth 5 Low Energy for short-range wireless communication. The module includes an integrated PCB antenna and supports RF output power up to approximately +20 dBm. Peripheral Interfaces The module provides a wide range of interfaces, including general-purpose input/output (GPIO) pins, SPI, I2C, UART, and I2S for audio applications. It also supports PWM for LED control, a 12-bit analog-to-digital converter (ADC), and USB OTG functionality. Pin functions are multiplexed to maximize flexibility. Power Management Power efficiency is achieved through multiple operating modes, including active mode, modem sleep, light sleep, and deep sleep. The module includes an RTC subsystem for low-power timekeeping and supports dynamic frequency scaling to optimize performance and energy consumption. Security Features The module incorporates several hardware-based security mechanisms, including secure boot, flash encryption, and digital signature verification. It also includes a hardware random number generator and cryptographic accelerators supporting AES, SHA, RSA, and ECC algorithms. Mechanical Characteristics The module is designed for surface-mount integration and measures approximately 18 mm by 25.5 mm. It includes an onboard PCB antenna and is suitable for compact embedded designs. Pin Configuration Overview GPIO pins are multiplexed to support various peripheral functions such as analog inputs, communication interfaces, and control signals. Dedicated pins are provided for power supply, module enable, and boot configuration. Typical Applications Internet of Things (IoT) devices Smart home systems Industrial automation and monitoring Edge AI and machine learning applications Wearable electronics Audio and multimedia systems USB-enabled embedded devices Compliance The module is designed to meet Wi-Fi and Bluetooth standards and is compliant with RoHS requirements. Certification such as FCC or CE may apply depending on the specific module variant and deployment. Ordering Information The ESP32-S3-WROOM-1-N8R2 variant includes 8 MB of flash memory and 2 MB of PSRAM. #commonpartslibrary #integratedcircuit #transceiver #wireless #rf

Motor Driver ICs DRV8353RSRGZT VQFN-48_L7.0-W7.0-P0.50-TL-EP LCSC Part Number: C2150650 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Resettable Fuses ASMD1206-200 F1206 LCSC Part Number: C135342 JLCPCB Part Class: Extended Part Manufactured by JDTfuse(集电通)

AC-DC Controllers & Regulators UCC28740DR SOIC-8_7P-L5.0-W4.0-P1.27-LS6.1-BL-PE7 LCSC Part Number: C182073 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

N-Channel 20 V 6.5A (Ta) 1.4W (Ta) Surface Mount SOT-23-3 MOSFETs AO3416 SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR LCSC Part Number: C479060 JLCPCB Part Class: Extended Part Manufactured by PUOLOP(迪浦)

450CXW120MEFR18X31.5 CAP-TH_BD18.0-P7.50-D0.8-FD LCSC Part Number: C702532 JLCPCB Part Class: Extended Part Manufactured by rubycon(红宝石)

FS8205A dual N-channel enhancement mode MOSFET, 20V drain-source voltage, 6A drain current, low RDS(on) 22.5mΩ at VGS=4.5V and 27mΩ at VGS=2.5V, low gate charge, ±12V gate-source voltage, 26A pulsed drain current, 2W power dissipation, suitable for battery protection, load switch and power management applications, SOT-23-6L surface mount package.

Power Distribution Switches BTF3050TE PG-TO252-5_L6.5-W6.3-P1.14-LS10.0-BR LCSC Part Number: C534724 JLCPCB Part Class: Extended Part Manufactured by Infineon(英飞凌)

40V 500mV@3A 3A SMA(DO-214AC) Schottky Diodes ROHS SS34 Diode 40V 3A Surface Mount SMB SMB_L4.3-W3.6-LS5.4-RD LCSC Part Number: C2758511 JLCPCB Part Class: Extended Part Manufactured by UMW(友台半导体)

DC-DC Converters LMR33620ADDAR SOIC-8_L4.9-W3.9-P1.27-LS6.0-TL-EP-1 LCSC Part Number: C2071694 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

2 Position Wire to Board Terminal Block, Screw Terminal Block Through Hole 5.08mm LCSC Part Number: C474952 JLCPCB Part Class: Extended Part Manufactured by KEFA(科发)

LED Driver IC 4 Output Power Switch I2C Dimming 25mA 10-TSSOP LED Drivers PCA9632DP2,118 TSSOP-10_L3.0-W3.0-P0.50-LS4.9-BL LCSC Part Number: C2802666 JLCPCB Part Class: Extended Part Manufactured by NXP(恩智浦)

I/O Expanders PCA9557PW,118 TSSOP-16_L5.0-W4.4-P0.65-LS6.4-BL LCSC Part Number: C141380 JLCPCB Part Class: Extended Part Manufactured by NXP(恩智浦)

25 MHz ±30ppm Crystal 20pF 50 Ohms 4-SMD, No Lead The FL2500283Z is a 25 MHz surface-mount quartz crystal manufactured by Diodes Incorporated, part of the FL series (SaRonix-eCera™). It is designed for use as a stable clock reference in digital circuits such as microcontrollers, communication modules, and embedded systems. This crystal uses an AT-cut resonator inside a compact 3.2 mm × 2.5 mm (3225) ceramic package, making it suitable for high-density PCB designs and modern electronics. Key Features Standard Frequency 25 MHz fundamental mode crystal Compact SMD Package 3.2 × 2.5 mm (3225), 4-pad configuration Height ~0.68–0.75 mm AT-Cut Quartz Technology Provides good frequency stability and low drift Frequency Stability & Tolerance Typical: ±10 to ±30 ppm Load Capacitance Typically 20 pF Low ESR Around 50–60 Ω, suitable for MCU oscillator circuits Wide Operating Temperature Common range: -20°C to +70°C (some variants up to -40°C to +125°C) Surface-Mount Compatibility Ideal for automated assembly and reflow soldering RoHS / Lead-Free Environmentally compliant design Typical Applications Microcontroller clock (STM32, ESP32, AVR, etc.) Communication modules (Wi-Fi, Ethernet, RF) Embedded systems Consumer electronics Industrial control boards #Crystal #Oscillator #Resonator #SaRonix-eCera™ FL

Polymeric PTC Resettable Fuse 6V 3 A Ih Surface Mount 1812 (4532 Metric), Concave The 1812L300MR is a surface-mount resettable fuse (PPTC – Polymer Positive Temperature Coefficient) designed to provide overcurrent protection in electronic circuits. When excessive current flows, the device increases its resistance sharply, limiting current to a safe level. Once the fault condition is removed and power is cycled or reduced, the device resets automatically. This component is commonly used in power supply lines, battery-powered devices, USB ports, and general consumer electronics where resettable protection is preferred over one-time fuses. Key Features Resettable overcurrent protection device (PPTC technology) Surface-mount package (1812 footprint) Automatic recovery after fault removal Low resistance in normal operation Fast trip response to overcurrent events RoHS compliant and lead-free Electrical Characteristics Hold Current (I_hold): 3.0 A Trip Current (I_trip): ~6.0 A Maximum Voltage Rating: 6 VDC Maximum Current Rating: 40 A (short duration fault) Initial Resistance (R_min / R_max): ~0.015 Ω / 0.050 Ω Trip Time: Dependent on current and ambient conditions Thermal Characteristics Operating Temperature Range: -40°C to +85°C Storage Temperature Range: -40°C to +85°C Typical Power Dissipation: Dependent on fault condition Mechanical Characteristics Package Type: Surface Mount (SMD) Package Size: 1812 (4.5 mm × 3.2 mm approx.) Termination: Nickel barrier with matte tin plating Mounting: Reflow solder compatible Applications Power supply protection USB and peripheral ports Battery pack protection Consumer electronics Industrial control circuits Compliance and Standards RoHS compliant Halogen-free (depending on manufacturer variant) UL recognized (check specific manufacturer certification) Notes Trip and hold currents are specified at 25°C; derating is required at higher temperatures Device performance depends on PCB layout and thermal environment Proper spacing and copper area improve heat dissipation and reliability #commonpartslibrary #circuitprotection #ptc #fuse

Polymeric PTC Resettable Fuse 6V 500 mA Ih Surface Mount 0603 (1608 Metric), Concave The 0603L050YR is a surface-mount resettable fuse (PPTC – Polymer Positive Temperature Coefficient) designed to provide overcurrent protection in low-voltage electronic circuits. Housed in a compact 0603 package, this device automatically increases its resistance when excessive current flows, thereby limiting fault current and protecting downstream components. Once the fault condition is removed and power is cycled or reduced, the device resets to its original low-resistance state. Key Features Resettable overcurrent protection (PPTC technology) Compact 0603 surface-mount package Fast trip response to fault conditions Automatic recovery after fault removal Low resistance in normal operating state RoHS compliant and halogen-free Electrical Characteristics Hold Current (I_hold): 500 mA Trip Current (I_trip): ~1 A Maximum Voltage: 6 V Maximum Current: 40 A (short duration fault) Initial Resistance (R_min / R_max): Low resistance range typical for 0603 PPTC devices Thermal Characteristics Operating Temperature Range: -40°C to +85°C Trip Time: Dependent on fault current and ambient temperature Thermal cycling endurance suitable for standard SMT processes Mechanical Characteristics Package: 0603 (1608 Metric) Mounting Type: Surface Mount (SMD/SMT) Termination: Nickel barrier with matte tin plating Weight: Ultra-light, suitable for high-density PCB layouts Applications USB ports and peripherals Battery-powered devices Consumer electronics Power supply protection Embedded systems and IoT devices Compliance and Standards RoHS compliant Lead-free construction Meets industry standards for resettable fuses (PPTC devices) #commonpartslibrary #circuitprotection #ptc #fuse

Polymeric PTC Resettable Fuse 6V 1 A Ih Surface Mount 0603 (1608 Metric), Concave polyfuse 1A 0603 The 0603L100SLYR is a surface-mount resettable fuse (PPTC – Polymeric Positive Temperature Coefficient) designed to provide overcurrent protection in low-voltage electronic circuits. When excessive current flows, the device increases its resistance sharply, limiting current and protecting downstream components. Once the fault condition is removed and power is cycled or reduced, the fuse resets automatically. This component is widely used in compact electronic devices due to its small 0603 footprint, making it suitable for space-constrained PCB designs. Key Features Resettable overcurrent protection device Compact 0603 surface-mount package Fast response to fault conditions Automatic reset after fault removal RoHS compliant and lead-free construction Low resistance in normal operation Stable performance over multiple trip cycles Electrical Characteristics Hold current: 1.0 A Trip current: approximately 2.0 A Maximum voltage rating: 6 V Maximum current rating: 40 A (short duration fault current) Initial resistance: low resistance typical for minimal voltage drop Resistance after trip: significantly increased to limit current Thermal Characteristics Operating temperature range: −40 °C to +85 °C Trip time dependent on current and ambient temperature Self-heating mechanism triggers resistance increase Mechanical Characteristics Package type: 0603 (1608 metric) Mounting type: surface mount (SMD) Body material: polymer-based PTC Terminal finish: solderable metal electrodes compatible with reflow soldering Applications USB ports and power lines Battery-powered devices Consumer electronics Portable devices Embedded systems and IoT hardware Power supply protection circuits Compliance and Standards RoHS compliant Halogen-free (typical for series) Meets industry standards for resettable fuses #commonpartslibrary #circuitprotection #ptc #fuse

Linear Voltage Regulator IC Positive Fixed 1 Output 200mA SOT-23-5 TPS7A02-3.3 #commonpartslibrary #integratedcircuit #powermanagement #voltageregulator

Pre-ordered MCUs MIMXRT1176DVMAA MAPBGA-289_L14.0-W14.0-R17-C17-P0.80-TL LCSC Part Number: C1020237 JLCPCB Part Class: Extended Part Manufactured by NXP(恩智浦)