Single Non-Inverting 3-State Buffer IC – Single non-inverting CMOS buffer with a 3-state output and TTL-compatible inputs for signal buffering, bus interfacing, memory address/data buses, digital logic control, and embedded systems. Operates from a 4.5 V to 5.5 V supply and features 8 mA source/sink output drive capability, active-low output enable (OE), and high-impedance output mode for shared bus applications. Provides high-speed operation with a typical propagation delay of 8.5 ns, low power CMOS operation, latch-up performance exceeding 250 mA, and ESD protection compliant with HBM and CDM standards. Specified for operation over a −40°C to +125°C temperature range and housed in a compact 5-pin SOT-23 (DBV) surface-mount package. #TexasInstruments #SN74AHCT1G125DBVR #SN74AHCT1G125 #LogicBuffer #TriStateBuffer #BusBuffer #TTLCompatible #CMOSLogic #SignalBuffer #DigitalLogic #SOT23 #EmbeddedSystems

Low-Current Chip LED – Yellow-green surface-mount LED for status indication, portable electronics, industrial equipment, and wearable devices. Features a 569 nm dominant wavelength, 1.9 V typical forward voltage at 1 mA, and 2.1 mcd typical luminous intensity. Built using AlGaInP technology, it is optimized for low-current operation (1 mA typical) to minimize power consumption. Packaged in an ultra-small 0402 (1006 Metric, 1.0 × 0.6 × 0.2 mm) clear molded package for high-density PCB designs. Specified for operation over a −40°C to +85°C temperature range with a 54 mW maximum power dissipation. #ROHM #SMLP11MTT86R #PICOLED #ChipLED #YellowGreenLED #0402LED #SMDLED #IndicatorLED #LowCurrentLED #AlGaInP #Optoelectronics #EmbeddedSystems

Automotive CAN FD Transceiver – High-speed CAN FD transceiver compliant with ISO 11898-2:2016 for automotive ECUs, body electronics, industrial automation, motor control, battery management systems (BMS), and embedded communication networks. Supports Classical CAN and CAN FD communication with data rates up to 8 Mbps, operating from a 4.5 V to 5.5 V supply. Features standby mode with ultra-low power consumption, ±58 V bus fault protection, TXD dominant timeout, thermal shutdown, undervoltage protection, 100 mV receiver hysteresis, and failsafe operation for robust and reliable CAN communication. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C junction temperature range and is housed in a standard 8-pin SOIC package. Unlike the TCAN1462VDRBRQ1, this version does not include Signal Improvement Capability (SIC), making it suitable for conventional CAN/CAN FD networks. #TexasInstruments #TCAN1462VDRQ1 #TCAN1462Q1 #CANFD #CANTransceiver #AutomotiveElectronics #IndustrialCommunication #BatteryManagement #AECQ100 #SOIC8 #EmbeddedSystems

Artix® UltraScale+ Field Programmable Gate Array (FPGA) IC 228 5347738 170100 676-BBGA, FCBGA Field-programmable gate array (FPGA) designed for implementing configurable digital logic and embedded system functions. The AMD XCAU15P-2FFVB676I is an UltraScale+™ architecture FPGA featuring programmable logic, integrated block RAM, DSP slices, high-speed serial transceivers, and hardened PCI Express® support, operating from a 0.85 V core supply and housed in a 676-ball FFVB package. It is part of the AMD UltraScale+ FPGA family, which supports high-performance and power-efficient programmable logic applications. #AMD #XCAU15P #UltraScalePlus #FPGA #ProgrammableLogic #BlockRAM #DSP #PCIe #HighSpeedTransceivers #FFVB676 #EmbeddedSystems #PCBComponents

Automotive High-Side Load Switch IC – Single-channel high-side load switch optimized for automotive power distribution, ADAS, infotainment, body electronics, industrial control, and embedded power management. Operates from a 1.5 V to 5.5 V control supply and switches 0.8 V to 5.5 V load voltages, delivering up to 3 A continuous output current with an ultra-low 19 mΩ (typical) ON resistance for minimal power loss. Features controlled slew-rate switching to reduce inrush current, integrated quick output discharge (QOD), fixed current limiting, thermal shutdown, reverse current blocking (when disabled), and low quiescent current for efficient operation. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient temperature range and is housed in a compact 6-pin SOT-23 Thin (TSOT-23-6) package. #TexasInstruments #TPS22995HQDDCRQ1 #TPS22995 #LoadSwitch #HighSideSwitch #PowerDistribution #PowerManagement #CurrentLimiting #AutomotiveElectronics #AECQ100 #SOT236 #EmbeddedSystems

5.5x5.0x1.6mm Top SMD Type 0.25 Watt Power integrated light source Intelligent control LED SK6812RGBW-WS is an intelligent RGBW (Red, Green, Blue, Warm White) addressable LED that integrates both the LED package and control IC into a single 5050 SMD package. Each LED functions as an individually controllable pixel, supporting 32-bit color data transmission (8 bits per channel) through a single-wire serial interface. The WS variant features a warm white channel with a color temperature of approximately 2700–3000 K, making it ideal for decorative, ambient, architectural, and smart lighting applications where accurate warm white illumination is required. The device operates from a 5 V supply and supports cascading of numerous LEDs with built-in signal reshaping for reliable long-distance data transmission. Key Features Integrated RGBW LED and control IC in a single 5050 SMD package Dedicated warm white (WS) channel, 2700–3000 K color temperature Individually addressable pixel control 32-bit color data (8-bit Red, Green, Blue, and White channels) Single-wire serial communication interface Built-in constant-current driver and PWM control Signal reshaping and automatic forwarding for long LED chains Typical data transmission rate of 800 kbps Operating voltage: 3.5 V to 5.5 V (5 V nominal) Wide operating temperature range: -40°C to +85°C High brightness, excellent color consistency, and long operational life Suitable for LED strips, pixel displays, decorative lighting, signage, and smart lighting systems #SK6812RGBW #SK6812RGBWWS #AddressableLED #RGBWLED #SmartLED #5050LED #WarmWhiteLED #LEDStrip #PixelLED #DigitalLED #EmbeddedSystems #IoTLighting #LEDDisplay #LightingDesign #Electronics

ARM® Cortex®-A53 Microprocessor IC i.MX8ML 2 Core, 64-Bit 1.8GHz 548-LFBGA (15x15) Application Processor for embedded multimedia and industrial systems, integrating dual Arm® Cortex®-A53 cores operating up to 1.8 GHz and a Cortex®-M4 real-time core up to 400 MHz. It supports LPDDR4/DDR4/DDR3L memory, Gigabit Ethernet, PCIe, USB 2.0, MIPI-CSI/DSI, SAI audio interfaces, and 1080p video encode/decode, and is housed in a 0.8 mm pitch 486-ball FCBGA package. #ApplicationProcessor #NXP #iMX8MMini #ARMCortexA53 #CortexM4 #EmbeddedProcessor #MultimediaProcessor #FCBGA486 #LPDDR4 #DDR4 #PCIe #USB2 #GigabitEthernet #MIPI #SAI #EmbeddedSystems

High-Speed Automotive Comparator – Single rail-to-rail high-speed comparator with push-pull output, adjustable hysteresis, and latch function for fast signal detection applications. Operates from a 2.4 V to 5.5 V supply, features 2.5 ns typical propagation delay, 325 MHz toggle frequency, ±5 mV maximum input offset voltage, and an input common-mode range extending 200 mV beyond both supply rails. Includes power-on reset (POR) functionality and is specified for an operating temperature range of −40°C to +125°C. Housed in a 6-pin SC70 (DCK) package. #TexasInstruments #TLV3603QDCKRQ1 #TLV3603Q1 #Comparator #HighSpeedComparator #RailToRail #PushPullOutput #AdjustableHysteresis #Latch #325MHz #2_5ns #SC70 #Automotive #EmbeddedSystems

Rotary Carbon Potentiometer (Audio/Log Taper) – Single-turn rotary potentiometer designed for audio volume control, user interface adjustment, industrial equipment, consumer electronics, musical instruments, and embedded control applications. Features a 10 kΩ logarithmic (audio) taper, ±20% resistance tolerance, and 50 mW (1/20 W) power rating. Part of the Bourns Pro Audio PTV09 Series, it provides 280° mechanical rotation, a 6 mm flatted shaft with 20 mm length, top adjustment, carbon resistive element, and through-hole snap-in mounting with PC pins and board locks for secure PCB installation. The potentiometer has a single gang, no integrated switch, and is suitable for low-power analog signal adjustment in compact electronic designs. #Bourns #PTV09A4020FA103 #PTV09 #RotaryPotentiometer #AudioTaper #LogarithmicPotentiometer #CarbonPotentiometer #VolumeControl #UserInterface #ThroughHole #EmbeddedSystems

Multilayer Ceramic Capacitor (MLCC) – 2.2 µF ceramic chip capacitor with 100 V DC rated voltage, ±10% capacitance tolerance, and X7R dielectric for general-purpose decoupling and filtering applications. Features 3% maximum dissipation factor, 227 MΩ minimum insulation resistance, and operates over a −55°C to +125°C temperature range. Designed for surface-mount assembly in a 1210 (3225 Metric) package. #TDK #C3225X7R2A225K230AB #MLCC #CeramicCapacitor #MultilayerCeramicCapacitor #X7R #2_2uF #100V #1210 #3225Metric #SurfaceMount #PassiveComponents #EmbeddedSystems

MXM 3.0 Edge Card Connector – 314-position right-angle female edge card connector for MXM 3.0 graphics modules. Features a 0.50 mm pitch, dual-row contact arrangement, surface-mount solder termination, gold-plated copper alloy contacts (0.76 µm / 30 µin), and supports 1.20 mm card thickness. Includes board guides and solder retention features for improved mechanical stability. #Amphenol #AmphenolICC #FCI #10151114001TLF #MXM30 #EdgeCardConnector #BoardToBoard #GraphicsModuleConnector #314Position #0_5mmPitch #SurfaceMount #EmbeddedSystems

Automotive 8 A Synchronous Buck Converter IC – High-efficiency synchronous step-down (buck) DC-DC converter optimized for automotive power supplies, industrial automation, networking equipment, point-of-load regulation, and embedded power applications. Operates from a 4.5 V to 28 V input voltage and provides an adjustable output voltage from 0.6 V to 13 V with up to 8 A continuous output current. Features integrated high-side (20.4 mΩ) and low-side (9.5 mΩ) MOSFETs, D-CAP3™ control architecture for fast transient response, 45 µA typical quiescent current, selectable switching frequencies of 500 kHz, 800 kHz, or 1.2 MHz, pre-biased startup, power-good (PG) output, soft-start, frequency synchronization, and light-load Eco-mode™ operation for improved efficiency. Includes comprehensive protection with cycle-by-cycle current limiting, undervoltage lockout (UVLO), overvoltage protection (OVP), thermal shutdown, and hiccup-mode short-circuit protection. Specified for operation over a −40°C to +150°C junction temperature and housed in a compact 10-pin VQFN-HR (3 × 3 mm) package. #TexasInstruments #TPS56837RPAR #TPS56837 #BuckConverter #SynchronousBuck #DCDCConverter #PowerManagement #PointOfLoad #IndustrialElectronics #AutomotiveElectronics #VQFN10 #EmbeddedSystems

Shielded RJ45 Connector with Integrated Magnetics (PoE) – Single-port RJ45 Ethernet connector with integrated 10/100Base-T magnetics for industrial Ethernet, embedded networking, IoT gateways, automation equipment, IP cameras, networking devices, and Power over Ethernet (PoE) applications. Features a through-hole, right-angle PCB mount, CAT5e-compliant interface, and supports 10/100Base-T Ethernet, Auto-MDIX, and PoE operation. Includes integrated isolation transformers, common-mode chokes, yellow and green status LEDs, shielded metal housing, board guide for secure mounting, and gold-plated contacts (30 µin / 0.76 µm) for reliable long-term performance. Designed with a tab-down RJ45 orientation, 90° entry, and operates over a −40°C to +85°C temperature range, making it suitable for rugged industrial and embedded networking applications. #WurthElektronik #7499210121A #RJ45Connector #EthernetConnector #IntegratedMagnetics #MagJack #CAT5e #PoE #10100BaseT #IndustrialEthernet #EmbeddedNetworking #IoT #EmbeddedSystems

Shielded RJ45 Ethernet Connector – Single-port RJ45 (8P8C) shielded modular jack for 10/100Base-T Ethernet and networking applications. Features a right-angle through-hole PCB mount, Cat 5 performance, 8 loaded contacts, inverted latch (latch-up) orientation, and standard-profile side-entry design. Constructed with 15 µin gold-plated phosphor bronze contacts, a nickel-plated copper alloy shield, and a high-temperature thermoplastic housing (UL94 V-0). Includes PCB and panel grounding tabs, matte tin-plated solder tails, and is specified for operation over a −40°C to +85°C temperature range. Designed for Fast Ethernet (10Base-T and 10/100Base-T) applications. #TEConnectivity #AMP #14065415 #RJ45 #EthernetConnector #Cat5 #8P8C #ShieldedRJ45 #RightAngle #ThroughHole #Networking #EmbeddedSystems

PCB Terminal Block – 2-position, through-hole PCB terminal block for wire-to-board connections with 7.62 mm pitch. Features screw connection with tension sleeve, 32 A nominal current, 630 V rated voltage (III/2), 4 mm² nominal conductor cross-section, M3 screw terminals, and side interlocking for creating multi-position assemblies. Operates over a −40°C to +100°C temperature range and uses a horizontal wire-entry configuration. #PhoenixContact #1868076 #MKDS52762 #PCBTerminalBlock #TerminalBlock #WireToBoard #ScrewTerminal #ThroughHole #2Position #7_62mmPitch #32A #630V #COMBICON #EmbeddedSystems

Vertical RCA Phono Jack Connector – Single-port vertical RCA (phono) female jack for audio/video equipment, consumer electronics, amplifiers, multimedia devices, test equipment, and embedded audio applications. Features a through-hole PCB mount, mono (2-conductor) configuration, and 3.2 mm ID / 9.0 mm OD industry-standard RCA mating interface. Constructed with brass contacts and nickel plating for reliable electrical performance, it includes a board-lock feature for enhanced mechanical stability during soldering and use. The connector has a white insulator, solder termination, no internal switch, and operates over a −20°C to +85°C temperature range. #SameSky #RCJ023 #RCAJack #PhonoConnector #AudioConnector #ThroughHoleConnector #PCBConnector #MonoConnector #ConsumerElectronics #AudioEquipment #EmbeddedSystems

Ultra-Low IQ Synchronous Buck DC-DC Converter – 300 mA synchronous step-down (buck) switching regulator for high-efficiency industrial, automotive, battery-powered, and embedded power applications. Operates from a 3 V to 65 V input voltage, provides an adjustable output voltage from 1.0 V to 65 V, and delivers up to 300 mA output current. Features 6 µA typical quiescent current, programmable switching frequency from 200 kHz to 2.2 MHz, 100% duty-cycle operation, synchronous rectification, Power Good (PG) output, enable input, soft-start, cycle-by-cycle current limiting, hiccup short-circuit protection, thermal shutdown, and undervoltage lockout (UVLO). Specified for operation over a −40°C to +150°C junction temperature range and housed in a 9-pin VQFN-HR (2 × 2 mm) wettable-flank package. #TexasInstruments #LMR36503RFRPER #LMR36503 #BuckConverter #SynchronousBuck #DCDCConverter #SwitchingRegulator #PowerManagement #UltraLowIQ #300mA #VQFN9 #EmbeddedSystems

Sealed Automotive Wire-to-Board Header Connector – 6-position rectangular male header designed for automotive wiring harnesses, off-highway vehicles, heavy equipment, industrial machinery, marine electronics, and rugged embedded systems. Part of the TE Connectivity DEUTSCH DT Series, it features a 2-row, 4.44 mm (0.175") pitch configuration with through-hole vertical PCB mounting for reliable wire-to-board connections in harsh environments. Rated for 13 A per contact and 250 VDC, it uses nickel-plated copper alloy contacts with glass-filled nylon (PA) housing, providing excellent durability and corrosion resistance. The connector includes a sealed 4-wall shrouded design, mounting flange, latch retention, and compatibility with DT04-6P mating connectors for secure, vibration-resistant connections. Suitable for −55°C to +125°C operation, it is ideal for demanding automotive and industrial applications. #TEConnectivity #Deutsch #DT156P #DTSeries #AutomotiveConnector #WireToBoard #SealedConnector #ThroughHoleConnector #IndustrialElectronics #HeavyEquipment #AutomotiveElectronics #EmbeddedSystems

General-Purpose Power Relay – Single-Pole Double-Throw (SPDT, 1 Form C) electromechanical power relay designed for industrial control, home appliances, power supplies, HVAC systems, motor control, automation equipment, and embedded switching applications. Features a 5 VDC coil voltage, 10 A contact rating, and supports switching of up to 250 VAC or 125 VDC loads. Equipped with AgSnO (silver tin oxide) contacts for high durability and excellent switching performance, it provides fully sealed construction for improved environmental resistance. The relay has a through-hole PCB mount, non-latching coil with 63 Ω coil resistance (79.4 mA coil current), 10 ms maximum operate time, 5 ms maximum release time, and Class B coil insulation. Certified by UL, CSA, TÜV, and VDE, it operates over a −25°C to +85°C temperature range and is supplied in a compact PCB through-hole package. #Aratas #G5LE14DC5 #PowerRelay #SPDTRelay #ElectromechanicalRelay #GeneralPurposeRelay #10ARelay #5VRelay #IndustrialAutomation #MotorControl #ThroughHole #EmbeddedSystems

Automotive Smart High-Side Power Switch – Single-channel 100 V smart high-side N-channel power switch for automotive power distribution, electronic fuse (eFuse), load protection, and battery-connected applications. Operates from a 3.5 V to 80 V supply, drives up to 4 A continuous output current, and features an ultra-low 10 mΩ typical RDS(on) for high-efficiency load switching. Includes adjustable current limiting, reverse current blocking, reverse battery protection, overvoltage protection, undervoltage lockout (UVLO), short-circuit protection, thermal shutdown, slew-rate control, open-load diagnostics, status flag output, and differential input control. Qualified to AEC-Q100 Grade 1, specified for operation over a −40°C to +125°C ambient temperature range, and housed in a 19-pin VSSOP (DGX) package. #TexasInstruments #TPS48110AQDGXRQ1 #TPS48110Q1 #SmartHighSideSwitch #HighSidePowerSwitch #EFuse #LoadSwitch #PowerDistribution #Automotive #CurrentLimiting #ReverseBatteryProtection #AECQ100 #EmbeddedSystems

BQ7961x-Q1 family (BQ79612-Q1, BQ79614-Q1, BQ79616-Q1, BQ79616H-Q1) are automotive-grade, functional safety-compliant battery monitoring and balancing ICs from Texas Instruments for high-voltage Battery Management Systems (BMS). The devices support 12, 14, or 16 series-connected lithium-ion battery cells and provide high-accuracy voltage measurements, integrated cell balancing, hardware protection, temperature monitoring, and isolated daisy-chain communication. Designed for hybrid and electric vehicles (HEV/EV) and energy storage systems (ESS), the BQ7961x-Q1 family supports ISO 26262 functional safety up to ASIL D, integrated diagnostics, redundant voltage measurement paths, configurable digital filtering, and stackable architectures for large battery packs. The family offers precise battery state monitoring, enhanced safety, and scalable BMS implementation for automotive and industrial energy storage applications. Search Keywords: BQ79612-Q1, BQ79614-Q1, BQ79616-Q1, BQ79616H-Q1, BQ7961x-Q1, Texas Instruments BQ79616, Battery Monitor IC, Battery Management System IC, BMS Controller, Automotive BMS, EV Battery Monitor, Cell Balancing IC, High Voltage Battery Monitor, ISO26262 ASIL-D, Automotive Battery Protection, Lithium Battery Monitor, Energy Storage BMS, Stackable Battery Monitor, Battery Pack Monitoring, Cell Voltage Measurement IC, Electric Vehicle Battery Management Hashtags: #BQ79612Q1 #BQ79614Q1 #BQ79616Q1 #BQ79616HQ1 #BQ7961xQ1 #TexasInstruments #BatteryManagementSystem #BMS #CellBalancing #BatteryMonitor #ElectricVehicle #EVBattery #EnergyStorage #LithiumBattery #AutomotiveElectronics #ISO26262 #ASILD #PowerElectronics #EmbeddedSystems #HardwareDesign BQ79612-Q1

Surface-Mount Piezo Audio Transducer – Externally driven piezoelectric audio transducer designed for audible alerts, alarms, user notifications, medical devices, consumer electronics, and embedded systems. Operates at a 3 Vp-p rated drive voltage with an operating voltage range of 1 to 25 Vp-p, producing a minimum sound pressure level of 70 dBA at 10 cm with a 4 kHz ±500 Hz resonant frequency. Features 1 mA maximum current consumption, 12,000 pF ±30% capacitance, top sound port, and surface-mount (SMD) construction with 9 × 9 × 2.4 mm dimensions. Supports reflow soldering, utilizes an LCP housing with tin-plated brass terminals, and is specified for operation over a −30°C to +85°C temperature range. #PUIAudio #SMT0940T3VR #PiezoTransducer #PiezoBuzzer #AudioTransducer #SMDBuzzer #Alarm #AudibleIndicator #EmbeddedSystems #IndustrialElectronics #ConsumerElectronics #MedicalDevices

Isolated IEEE 802.3af PoE Powered Device (PD) DC-DC Converter Module – High-efficiency isolated Power over Ethernet (PoE) DC-DC converter module designed for IP cameras, VoIP phones, wireless access points, industrial Ethernet devices, IoT gateways, embedded networking equipment, and PoE-powered systems. Delivers a regulated 5 V output at up to 5.1 A (25.5 W) from a 37 V to 57 V PoE input, compliant with IEEE 802.3af PoE Powered Device (PD) requirements. Features 2.25 kVDC input-to-output isolation, up to 90.5% efficiency, low ripple and noise (150 mVp-p max), integrated PoE interface, overcurrent, overvoltage, and short-circuit protection, and support for T2P and adapter OR-ing. Designed for surface-mount assembly in a compact 35.5 × 22.4 × 10.6 mm module, it operates over a −40°C to +85°C temperature range, making it ideal for commercial and industrial embedded power applications. #MurataPowerSolutions #MYBSP0055AABFT #PoEConverter #DCDCConverter #PowerOverEthernet #IEEE8023af #IsolatedPowerModule #IndustrialEthernet #EmbeddedPower #IoT #SurfaceMount #EmbeddedSystems

Fast-Acting Surface-Mount Fuse – 15 A fast-acting surface-mount fuse for overcurrent protection in power supplies, DC-DC converters, automotive electronics, industrial equipment, battery-powered devices, and embedded systems. Features a 32 VDC voltage rating, 15 A current rating, and a 300 A interrupt rating at rated voltage, providing rapid protection against overloads and short circuits. Part of the Littelfuse NANO²® 451 Series, it offers low cold resistance (5.1 mΩ typical), 97.8 A²s melting I²t, fast-blow response, and is AEC-Q200 qualified for automotive applications. Designed in a compact 1206 (3216 Metric) surface-mount package, it operates over a −55°C to +125°C temperature range and carries UL and CSA safety approvals. #Littelfuse #0451015MRL #NANO2451 #SurfaceMountFuse #FastActingFuse #CircuitProtection #OvercurrentProtection #SMDFuse #AECQ200 #PowerManagement #1206 #EmbeddedSystems

Microcontroller – 32-bit Arm® Cortex®-M0+ microcontroller operating at up to 64 MHz, featuring 512 KB Flash memory, 144 KB SRAM, and 30 programmable I/O pins. Operates from a 1.7 V to 3.6 V supply and integrates a 13-channel 12-bit ADC, 2-channel 12-bit DAC, three analog comparators, and communication interfaces including CAN FD, USB 2.0 Full-Speed, USB Type-C® Power Delivery, I²C, SPI, I²S, UART/USART, HDMI-CEC, IrDA, and LIN. Includes DMA, PWM timers, brown-out detect/reset, power-on reset (POR), and watchdog timer (WDT) peripherals. Housed in a 32-pin UFQFPN (5 × 5 mm) package. #STMicroelectronics #STM32 #STM32G0B1KEU6 #Microcontroller #ARMCortexM0Plus #32BitMCU #64MHz #512KBFlash #144KBSRAM #ADC #DAC #CANFD #USB2 #USBTypeC #I2C #SPI #I2S #UART #UFQFPN32 #EmbeddedSystems