I’ll use BQ79612PAPRQ1, the current component’s MPN, in place of [MPN]. In Agent mode, I’ll check the official datasheet and apply verified symbol, footprint, and metadata corrections while preserving every pin’s identity, number, and mapping.
I’ll remove any Pin Group properties, place Power sections first and Ground sections last, balance pins between both sides, and mark unresolved functions Unclear / Check datasheet.
I’ll check the official TI datasheet, correct the symbol layout and any verified footprint or metadata errors, then confirm that all pin identities, numbers, and mappings remain unchanged.
Thought for 19 mins 27 sec
15 hrs ago
Thought for 10 sec
Created 2 tasks.
1/2 Audit the TI datasheet and apply symbol, footprint, and metadata corrections without changing pin identities or mappings.
Audit the TI datasheet and apply symbol, footprint, and metadata corrections without changing pin identities or mappings.
Verify pin preservation, symbol balance, footprint geometry, and review notes.
Applied TI-datasheet-based metadata and footprint corrections, set the official Datasheet URL, and balanced the symbol 33 left / 32 right, with Power first, Ground last, and no Pin Group properties—all 65 pin identities, numbers, and mappings remain unchanged.
Important: pins 2–9 must connect to BAT, and EP must connect to AVSS; these requirements are now documented without changing connectivity.
See Part Review for specifications, corrections, and verification results; footprint dimensions were checked numerically, but native footprint rendering failed and DRC remains unverified, so manufacturing validation is still needed.