Part Datasheet Audit

A

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata, locate the official datasheet if needed, update the Datasheet property, then verify the symbol, footprint, and pin descriptions against the manufacturer documentation.

flux

Audit complete. The existing Datasheet URL was already populated, so it was not changed; the current official Same Sky datasheet is https://www.sameskydevices.com/product/resource/rcj-02.pdf.
  • Metadata: MPN RCJ-023, manufacturer Same Sky, description and white vertical through-hole RCA configuration are correct. Mount: Vertical describes orientation rather than mounting technology; the datasheet specifies through-hole.
  • Key specs: 2 conductors/2 contacts, shielded, 30 mΩ max contact resistance, 100 MΩ min insulation resistance at 500 VDC, 500 VAC/1 minute withstand, 5,000 cycles, −20°C to +85°C, UL94V-0.
  • Critical mismatch: The datasheet defines only two electrical terminals. The two Ø2.00 mm shell holes are both terminal 1, while the Ø1.70 mm center-contact hole is terminal 2. The project instead has three symbol terminals and footprint pads numbered 1, 2, and 3; its center pad is numbered 1, and the shell pads are 2 and 3.
  • Geometry: Hole sizes and spacing match the drawing: shell holes Ø2.00 mm, 10.30 mm apart; center hole Ø1.70 mm with 1.60 mm offset. Pad copper sizes are 3.00 mm for shell holes and 2.55 mm for the center.
  • Pin descriptions: Missing. They should identify terminal 1 as the duplicated outer shell/sleeve contact and terminal 2 as the center contact.
Fix numbering and pins
Fix pin mismatch
Add pin descriptions
Set through-hole mount
Run part review
Sign up to send

Files

Pins

Symbol

Layout

3D View

2
Pin Number
2
1
Pin Number
1
3
Pin Number
3
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
2
2
Unspecified
3
3
Unspecified

RCJ-023