Datasheet Cross Check


I’ll inspect the current part metadata, find and attach the official datasheet if missing, then compare the symbol/footprint/pin data against the source and report any mismatches.
Created a project doc

Part Datasheet Cross-Check: TE Connectivity 1-406541-5

View Document

Date: 2026-07-20 Reviewed available part information for the published Flux part project silicon-yard/1-406541-5, including project metadata...
I created a project file with the full datasheet cross-check and mismatch list: Part Datasheet Cross-Check: TE Connectivity 1-406541-5. The core footprint geometry matches the TE drawing; the main issues are symbol metadata quality and the uploaded-vs-official datasheet URL.
Completed the review and documented the full findings in Part Datasheet Cross-Check: TE Connectivity 1-406541-5.
Open items:
  • Datasheet URL exists, so no conditional update was required; it points to an uploaded TE drawing copy rather than the live TE URL.
  • Symbol pins lack descriptions and use Unspecified pin type.
  • Shield terminals MH1/MH2 are potentially misleading; they appear to represent shield/shell tabs, not the NPTH mechanical holes.
Suggested next steps:
  1. Update pin descriptions and pin types.
  2. Rename MH1/MH2 to SH1/SH2 or SHELL1/SHELL2.
  3. If supported, replace the uploaded Datasheet URL with the official TE DocumentDelivery URL.
Fix symbol metadata
Use official datasheet
Run ERC/DRC
Export review report

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
2
2
Unspecified
3
3
Unspecified
4
4
Unspecified
5
5
Unspecified
6
6
Unspecified
7
7
Unspecified
8
8
Unspecified
9
MH1
Unspecified
10
MH2
Unspecified

1-406541-5