Audit of RTL8812AU-CG project metadata, 77-terminal schematic symbol, QFN footprint, and stored datasheet against Realtek RTL8812AU-CG Datasheet Rev. 0.2 (24 May 2011, Track ID JATR-2265-11).
The available Realtek PDF is marked “CONFIDENTIAL: Development Partners Only”; public copies are hosted by third parties. The stored document text identifies Realtek Semiconductor Corp. and the correct MPN/revision.
Audit complete. The datasheet URL was already populated, so no property update was needed; however, I found a critical pin mapping error: pins 41–43 are incorrectly assigned as GND/HSDP/HSDM instead of HSDP/HSDM/GND. Pin 50 is also mislabeled, all pin types/descriptions are missing, and the exposed-pad paste geometry needs manufacturing review.
Full specifications and findings are in the Part Audit Report. I also filed an internal part-quality report with the Flux engineering team.
I’ll correct the symbol’s pin assignments and metadata from the datasheet, then revise the exposed-pad paste into a segmented manufacturable pattern and verify the resulting symbol and footprint.
The symbol and metadata corrections are in place. The footprint API cannot safely create independent paste-only windows, so I preserved the exposed-pad copper and applied a centered paste reduction giving about 60.5% coverage; I’m now performing the final read-back verification.
Corrected the pin 41–43 mapping, pin 50 label, all 77 pin types/descriptions, and part metadata. Pad 77 retains its 6.06 × 6.56 mm copper land with a reduced 4.66 × 5.16 mm paste aperture (~60.5% coverage); true window-pane segmentation is not safely supported by the current footprint API.
Verification confirmed 77 unique pins and 77 footprint pads. Details are recorded in the updated Part Audit Report.