Part Audit Review

Thought for 42 mins 22 sec
Thought for 9 sec
1/2 Audit and correct the part against official TI electrical and mechanical documentation.

Audit and correct the part against official TI electrical and mechanical documentation.

Independently verify corrections and document any remaining limitations.

Thought for 20 sec
Awaiting 1 task
"LMR43610R3RPER Component Audit" completed.

flux

I corrected the metadata, nine-pin symbol mapping, and footprint copper, mask, and silkscreen, and added a replacement 3D model. I’m now independently checking those changes; stencil export and assembled 3D seating remain unverified.
Thought for 6 mins 48 sec
Thought for 11 sec
Awaiting 1 task
Thought for 26 sec
"LMR43610 Footprint Verification" completed.
Thought for 4 mins 2 sec
Thought for 8 sec
Awaiting 1 task
"LMR43610R3RPER Component Audit" completed.

flux

I corrected the draft’s nine-pin symbol, pin functions and mapping, footprint copper/mask geometry, metadata, and official datasheet link; I also replaced the oversized 3D model with a nominal datasheet-sized model. The Part Audit Report records the comparisons and corrections.
Not yet manufacturing-ready: native paste requires a custom stencil, assembled 3D seating remains unverified, and the published library version is still unchanged—do not use that older version for a new board.
Sign up to send

Files

Pins

Symbol

Layout

3D View

PGOOD
Pin Number
2
VIN
Pin Number
4
EN/UVLO
Pin Number
3
RT
Pin Number
1
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Active Level
RT
1
Input
Control
Left
2
PGOOD
2
Open Collector
Status
Right
1
EN/UVLO
3
Input
Control
Left
1
High
VIN
4
Power In
Power
Top
1
SW
5
Power Out
Switching
Right
2
BOOT
6
Power In
Switching
Right
1
VCC
7
Power Out
Power
Top
2
VOUT/FB
8
Input
Feedback
Right
1
GND
9
Ground
Ground
Bottom
1

LMR43610R3RPER