Part Datasheet Audit
Thought for 6 sec
I’ll audit the part metadata and existing symbol/footprint, locate the official E-Switch datasheet if needed, update the Datasheet property, then report any pin or mechanical mismatches.
Worked for 2 mins 49 sec
Audit complete. The existing Datasheet URL is populated, so no update was needed.
Confirmed
- MPN/manufacturer: 800SP9B5M2QEH, E-Switch
- Type: SPST-NO, OFF-(ON) momentary pushbutton
- Terminals: 2, numbered 1 and 3
- Rating: 3 A at 120 VAC or 28 VDC; 1 A at 250 VAC
- Mechanical life: 50,000 cycles
- Contact resistance: 20 mΩ max initial
- Temperature: −30°C to +85°C
- Footprint correctly uses 5.08 mm pitch, Ø1.09 mm holes, and an approximately 8.13 × 5.08 mm body outline.
Mismatches flagged
- The schematic graphic does not clearly depict an SPST normally-open momentary switch.
- Pins 1 and 3 are passive and correctly numbered, but have no functional descriptions.
- Library classification is incorrectly indexed as Integrated Circuit / Logic / AND, conflicting with the project’s Electromechanical Components property.
- The part lacks an explicit package/mount property such as through-hole, M2 straight PC pins.
- The current description is accurate but omits the 1 A at 250 VAC rating.
Correct all part metadata
Fix switch symbol
Update metadata only
Check 3D model fit
