Part Datasheet Audit

A

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata, locate the official Infineon datasheet if needed, update the Datasheet property, then verify symbol pins, footprint pads, and descriptions against the source.

flux

The official datasheet confirms this is a 4-contact PG‑TSON‑4/PQFN device, while the current part defines 12 terminals and has no usable footprint geometry. I’m documenting the full comparison and filing the library-part mismatch for review.
Created a project doc

Part Datasheet Audit — IGB070S10S1XTMA1

View Document
Part Datasheet Audit — IGB070S10S1XTMA1 Sources Current part metadata
  • MPN: IGB070S10S1XTMA1 — matches ordering code in datasheet.
  • Manufacturer: Infineon — matches.
  • Description: GaN FETs CoolGaN Transistor 100 V G3 in PQFN 3x3, 5 mohm — substantially correct.
  • Part type: Transistors / Other — broad but acceptable; more precise classification is normally-off enhancement-mode GaN HEMT.
  • Terminal count: 12 — incorrect relative to the datasheet's four numbered package contacts.

flux

Audit complete. The MPN, manufacturer, description, and pins 1–4 agree with Infineon, but the part has a critical mismatch: the datasheet specifies a 4-contact PG‑TSON‑4 device, while the symbol has 12 terminals and the footprint consists of unusable placeholder pads. The Datasheet URL was already populated, so it was not changed; I also filed a part-quality report.
Full specifications and pin-by-pin findings are in Part Datasheet Audit.
Rebuild verified part
Correct symbol pins
Create footprint geometry
Improve part metadata
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Pin Orientation
Terminal Order
G_1
1
Unspecified
Terminal
Right
2
D
2
Unspecified
Terminal
Right
1
S_1
3
Unspecified
Terminal
Left
S_2
4
Unspecified
Terminal
Left
G_2
5
Unspecified
Terminal
Right
3
S_3
6
Unspecified
Terminal
Left
S_4
7
Unspecified
Terminal
Left
S_5
8
Unspecified
Terminal
Left
S_6
9
Unspecified
Terminal
Left
S_7
10
Unspecified
Terminal
Left
S_8
11
Unspecified
Terminal
Left
S_9
12
Unspecified
Terminal
Left

IGB070S10S1XTMA1