Isolated Module DC DC Converter 1 Output 12V 2.5A 9V - 36V Input The PDQ30-Q24-S12-D is a compact isolated DC-DC converter module from CUI Inc. (also associated with Bel Power Solutions product lines). It is designed to convert a wide input voltage range (9–36 VDC) into a regulated 12 VDC output. This module delivers up to 30 watts of power and is packaged in a through-hole 6-DIP form factor, making it suitable for PCB mounting in industrial and embedded applications. It integrates isolation, regulation, and protection features, providing a reliable power solution for sensitive electronic systems. Key Features Power & Electrical Output power: 30 W Output voltage: 12 VDC Output current: up to 2.5 A Input voltage range: 9 – 36 VDC (wide range) Efficiency: up to ~89% Isolation & Protection 1.5 kV isolation voltage Built-in protections: Overcurrent (OCP) Overvoltage (OVP) Overtemperature (OTP) Short circuit protection (SCP) Undervoltage lockout (UVLO) Design & Integration Through-hole 6-DIP package (easy PCB mounting) Compact size: ~25.4 × 25.4 mm Single output design Remote On/Off control (Enable pin) Environmental Operating temperature: –40°C to +105°C Designed for industrial and commercial (ITE) applications Typical Applications Industrial automation systems Telecom and networking equipment Embedded control systems Robotics and process control Power distribution in PCB designs #CommonPartsLibrary #power-supply #DCDC-Converter #PDQ30-D (30W)

Isolated Module DC DC Converter 2 Output 15V -15V 170mA, 170mA 4.5V - 9V Input The REC5-0515DRW/H6/C/SMD-R specification defines the engineering requirements for an isolated DC-DC converter module designed for regulated power conversion in compact electronic systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure stable voltage conversion, reliable isolation, and long-term operational performance. The device is intended for use in embedded systems, industrial control equipment, communication modules, and distributed power architectures where isolated power rails are required. It provides regulated output power from a DC input source while maintaining galvanic isolation between input and output stages to enhance system safety and signal integrity. Engineering Requirements The power module shall be manufactured using controlled electronic assembly processes and high-reliability components to ensure stable conversion efficiency and consistent output regulation. The internal architecture shall support isolated power transfer with stable performance under defined load and environmental conditions. Electrical characteristics shall ensure stable output regulation, low output ripple, and reliable transient response during load variation. The device shall maintain consistent performance across its intended operating temperature range and input voltage variation conditions. Isolation performance shall ensure electrical separation between input and output circuits to protect downstream electronics and maintain system safety requirements. The module shall withstand electrical stress conditions defined by applicable safety and reliability standards. Thermal performance shall support continuous operation without degradation of output regulation or reliability under rated operating conditions. The device shall be suitable for PCB mounting and shall maintain structural integrity during soldering and long-term operation. Workmanship shall be free from defects such as contamination, cracks, soldering defects, or structural irregularities that could affect electrical performance or mechanical reliability. Manufacturing and inspection shall be performed using controlled processes and calibrated equipment. Any deviation from this specification shall require formal engineering review, documented justification, and approval through established engineering change control procedures. Documentation Supporting documentation shall include datasheets, electrical performance reports, isolation certification data, qualification test records, inspection reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems. Revision Control All changes to this specification shall be managed through the formal engineering change control system. Each revision shall undergo technical validation and approval prior to release to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #DCDCConverter #PowerModule #IsolatedPower #PowerElectronics #EmbeddedSystems #IndustrialElectronics #PowerSupply #QualityAssurance #EngineeringDocumentation

45-V, 2.5-A bipolar stepper motor driver with current regulation and 1/32 microstepping Bipolar Motor Driver Power MOSFET Logic 28-HTSSOP

A power management circuit featuring the MP2162 from Monolithic Power Systems, incorporating inductors, capacitors, and resistors for regulation. #project #referenceDesign #powermanagement #template #reference-design

This is a WiFi to Infrared (IR) gateway module leveraging an ESP32-S3 microcontroller for WiFi connectivity. It also incorporates a Type-C USB interface for data and power, 3 LEDs (red, green, & IR), and voltage regulation. It facilitates wireless control of IR devices, suitable for home automation projects. #reusable #module #edge-computing #espressif #sublayout #IR

A power management circuit featuring the MP2162 from Monolithic Power Systems, incorporating inductors, capacitors, and resistors for regulation. #project #referenceDesign #powermanagement #template #reference-design #MP2162 #monolithicpower

1.5A USB-Friendly Li-Ion Battery Charger and Power-Path Management IC with 4.2 VBAT The BQ24075TRGTR (from Texas Instruments) is a highly integrated single-cell Li-Ion / Li-Polymer linear battery charger IC with power-path management. It is designed for portable and space-constrained applications, allowing a device to be powered from a USB port or AC adapter while simultaneously charging the battery. The device integrates charging control, power-path management, and safety features into a compact package. A key feature is its Dynamic Power Path Management (DPPM), which ensures the system is powered even when the battery is low or absent, while intelligently managing charging current. Key Features Battery Charging Supports single-cell Li-Ion / Li-Polymer batteries Up to 1.5 A programmable charge current Three-phase charging: Pre-charge (conditioning) Constant current Constant voltage Fixed 4.2 V charge voltage Power Path Management Dynamic Power Path Management (DPPM): Powers system and charges battery simultaneously Prioritizes system load over charging Allows system operation even with: Deeply discharged battery No battery connected Input & Power Features Operates from: USB input (100 mA / 500 mA selectable) AC adapter Programmable input current limit up to 1.5 A Input voltage range: ~4.35 V to 6.4 V (28 V max rating) Input dynamic power management (VIN-DPM) prevents source overload Protection & Safety Thermal regulation and shutdown Over-voltage protection (OVP) Short-circuit and reverse current protection Battery temperature monitoring (NTC thermistor input) Battery disconnect (SYSOFF) feature Control & Status Standalone operation (no MCU required, resistor-programmable) Charge status outputs: Charging Charge complete Power good Physical Characteristics Package: 16-pin VQFN (3 mm × 3 mm) Operating temperature: –40°C to +85°C #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

Ethernet Controller 10/100 Base-T/TX Bus Interface 80-TQFP-EP (12x12) The LAN9254-I/JRX is an EtherCAT SubDevice (slave) controller developed by Microchip Technology, designed to serve as the communication backbone for industrial automation devices participating in an EtherCAT network. The device integrates dual Ethernet physical layer transceivers directly on-chip, eliminating the need for external PHY components and simplifying the design of EtherCAT-enabled equipment such as servo drives, sensors, I/O modules, and other field devices used in real-time industrial control systems. Architecturally, the controller can operate as either a two-port or three-port node, depending on the network topology required. In its standard configuration it functions as a two-port device supporting daisy-chain connections typical of EtherCAT line topologies. When configured as a three-port device, it gains an additional management interface port that can connect to an external PHY or to another LAN9254, enabling star or tree network topologies and allowing the device to act as a branching point within a larger EtherCAT installation. Each integrated Ethernet PHY operates in full-duplex mode and supports automatic crossover detection, so the device can use either straight-through or crossover cabling without requiring manual configuration. Beyond pure protocol handling, the LAN9254 includes a substantial set of general-purpose digital input and output lines, allowing it to be used in simple field devices without requiring a separate microcontroller. For more complex applications, the device communicates with an external host processor through an integrated host bus interface that behaves like simple memory-mapped SRAM, supporting both 8-bit and 16-bit data widths along with multiple byte-ordering conventions, which makes it straightforward to interface with a wide range of microcontroller and microprocessor architectures. Internally, dual process data RAM buffers manage the exchange of real-time process data between the host application and the EtherCAT communication engine, while a dedicated interrupt line notifies the host of relevant internal events. A key feature of the device is its built-in distributed clock mechanism, which provides high-precision timing synchronization across all nodes in an EtherCAT network. This capability is essential for motion control and other applications where multiple devices must act in tight temporal coordination. The controller also provides configurable status indication through standard network activity and link LEDs, along with optional error and run-state indicators that give visibility into the health and operational state of the device at a glance. Power architecture on the LAN9254 is simplified through an integrated linear regulator, allowing the device to be operated from a single primary supply rail while internally generating the lower voltage needed for its core logic. This reduces the external power supply complexity that would otherwise be required to support separate core and I/O voltage domains. The "-I" designation on this particular part number indicates an industrial-grade temperature rating, making it suitable for deployment in factory floor and other demanding industrial environments where extended thermal range and long-term reliability are required. The device is housed in a surface-mount package consistent with dense industrial control board layouts and is compliant with RoHS material restrictions. Spec Sheet Identification Part Number: LAN9254-I/JRX Device Family: LAN9254 Manufacturer: Microchip Technology Functional Classification Device Type: EtherCAT SubDevice (slave) controller Network Role: Two/three-port configurable node Integrated PHYs: Dual Ethernet physical layer transceivers, on-chip Auto-MDIX Support: Yes, supports direct and crossover cabling Communication & Protocol Features Protocol: EtherCAT Topology Support: Daisy-chain (line), star, and tree topologies Additional Port Mode: Optional third port for branching/tap configurations Clock Synchronization: Integrated distributed clock for high-precision timing Host Interface Interface Type: SRAM-like host bus interface Data Width Support: Selectable bit-width host bus operation Endianness Support: Multiple byte-ordering modes Process Data Handling: Dual process data RAM buffers Interrupt Support: Configurable host interrupt line Digital I/O General-Purpose I/O: Integrated digital I/O lines for microcontroller-less operation Standalone Mode: Supports operation without external microcontroller for simple device designs Power Architecture Supply Configuration: Single primary supply rail Internal Regulation: Integrated linear regulator for core voltage generation Status Indication LED Support: Standard run and link/activity indicators per port Optional Indicators: Configurable error and run-state status indicators Environmental & Qualification Temperature Grade: Industrial ("-I" suffix) RoHS Compliance: Yes Package Package Type: Surface-mount, quad flat package style Mounting: Surface mount technology (SMT) Packaging Format Supply Format: Tape-and-reel, per part suffix designation #LAN9254 #Microchip #EtherCAT #SlaveController #SubDeviceController #IndustrialEthernet #IndustrialAutomation #MotionControl #EmbeddedSystems #FieldDevice #DigitalIO #HostBusInterface #DistributedClock #TQFP #RoHSCompliant #IndustrialGrade #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #SemiconductorIC

Motor Driver Parallel 16-PDIP The TDA1085C is a universal motor speed controller IC designed for phase-angle control of AC universal motors. It is commonly used in washing machines, power tools, and other appliances requiring closed-loop motor speed regulation using a TRIAC drive stage. Key Features Closed-loop motor speed control TRIAC phase-angle control output Integrated frequency-to-voltage converter Built-in soft-start function Dual acceleration ramp generator Load current limiting protection Tachogenerator feedback sensing Direct AC line supply capability Motor stall and tachometer failure protection Wide operating temperature range Available in DIP-16 package Typical Applications Washing machine motor control AC universal motor drives Industrial motor speed regulators Power tools Sewing machines Small appliance motor controllers Package Information Package Type: PDIP-16 / SOIC-16 Operating Voltage: Typically up to 15 V regulated supply Manufacturer: Originally Motorola / ON Semiconductor #CommonPartsLibrary #IntegratedCircuit #motor-driver

This is a LoRa based gas leakage detector design featuring a BME680 gas sensor by Bosch Sensortec. It includes a Seeed LoRa module for RF communication and uses an MCU. The power is driven by two non-rechargeable AA batteries with voltage regulation by TPS613221ADBVR IC. The project also incorporates user interaction components such as indicators (LED) and switches. #LoRa #MCU #ReferenceDesign #Module #reusable #module #simple-embedded #seeed #seeed-studio #sublayout

Dual-channel H-bridge motor driver The DRV8833PWR is a dual H-bridge motor driver IC from Texas Instruments designed for driving small DC motors, stepper motors, solenoids, and other inductive loads in low-voltage battery-powered systems. It integrates two full H-bridge outputs that allow independent or combined control of two motors or one bipolar stepper motor. It is commonly used in robotics, toys, printers, and embedded motion-control applications due to its compact size and built-in protection features. Key Features Dual H-Bridge Motor Driver Drives 2 DC motors independently or 1 bipolar stepper motor Wide Supply Voltage Range Operates from 2.7 V to 10.8 V motor supply (VM) Output Current Capability Up to 2 A peak per H-bridge (package-dependent RMS limits apply) Supports parallel operation for higher current drive Low On-Resistance MOSFET Output Stage Reduces power loss and improves efficiency in battery-powered designs PWM Current Regulation Built-in current limiting and chopping control for better motor performance Multiple Control Modes Forward, reverse, brake, and coast control via simple logic inputs Protection Features Overcurrent protection Short-circuit protection Undervoltage lockout (UVLO) Thermal shutdown Low-Power Sleep Mode Reduces standby current for battery applications Compact Package 16-pin TSSOP (PW package), optimized for space-constrained PCB designs #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Linear Voltage Regulator IC Positive Fixed 1 Output 600mA SOT-25 3.3V LDO AP2112K-3.3 The AP2112K-3.3TRG1 is a low dropout (LDO) linear voltage regulator designed to provide a stable 3.3V output from a higher input voltage. It is optimized for low noise, high power supply rejection ratio (PSRR), and low quiescent current, making it suitable for battery-powered and noise-sensitive applications. The device features current limiting and thermal shutdown protection, ensuring reliable operation under fault conditions. It is commonly used in portable electronics, RF modules, microcontroller power supplies, and other low-power systems. Key Features Fixed output voltage: 3.3V Output current: up to 600 mA Low dropout voltage: ~250 mV at 300 mA load High PSRR: up to 70 dB at 1 kHz Low quiescent current: typically 55 µA Stable with low ESR ceramic capacitors Built-in overcurrent protection Thermal shutdown protection Fast transient response Absolute Maximum Ratings Input Voltage (VIN): up to 6.5 V Output Current: Internally limited Operating Junction Temperature: -40°C to +125°C Storage Temperature: -65°C to +150°C Electrical Characteristics (Typical values unless otherwise specified) Output Voltage Accuracy: ±2% Dropout Voltage: 250 mV @ 300 mA 400 mV @ 600 mA Line Regulation: 0.05%/V Load Regulation: 0.2% Quiescent Current: 55 µA Shutdown Current: <1 µA PSRR: 70 dB @ 1 kHz 45 dB @ 10 kHz Pin Configuration (SOT-23-5 / SC-70-5) VIN – Input voltage GND – Ground EN – Enable (active high) NC – No connection VOUT – Regulated output (3.3V) Package Information Package Type: SOT-23-5 (TRG1 suffix indicates tape & reel) Mounting: Surface mount Small footprint suitable for compact PCB layouts Typical Applications Battery-powered devices Wireless modules (Wi-Fi, Bluetooth, RF) Microcontroller and FPGA power supplies Portable consumer electronics Sensor and analog circuits requiring low noise Compliance & Reliability RoHS compliant Lead-free package Designed for high reliability and long operational life #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator

LED Driver IC 1 Output DC DC Controller SEPIC, Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 8-SO-EP # AL8866QSP-13 Engineering Specifications **General Description** The AL8866QSP-13 is an automotive-qualified, multi-topology DC-switching LED controller manufactured by Diodes Incorporated. It is designed to control an external power MOSFET for high-power automotive LED lighting systems. The device supports buck, boost, buck-boost and single-ended primary-inductance converter configurations. Its wide input-voltage range makes it suitable for automotive power systems and various high-voltage LED applications. The controller uses fixed-frequency peak current-mode regulation with spread-spectrum frequency modulation to reduce electromagnetic interference. It supports both analog and pulse-width-modulation dimming through the DIM input. An integrated programmable soft-start function gradually increases the inductor and switching currents during startup to reduce output-voltage and current stress. The open-drain fault output provides system-level fault reporting for abnormal operating conditions. **Engineering Specifications** **Manufacturer:** Diodes Incorporated **Manufacturer Part Number:** AL8866QSP-13 **Component Type:** Automotive LED driver controller **Converter Topologies:** Buck, boost, buck-boost and SEPIC **Control Architecture:** Fixed-frequency peak current-mode control **External Switching Device:** External power MOSFET **Minimum Input Voltage:** Four point seven volts **Maximum Input Voltage:** Eighty-five volts **Maximum Output Voltage:** Eighty-five volts **Switching Frequency:** Four hundred kilohertz **Frequency Modulation:** Spread-spectrum modulation for reduced electromagnetic interference **LED Current Control:** External current-sense resistor and external MOSFET configuration **Feedback Voltage:** Two hundred millivolts **Typical Quiescent Current:** One point eight milliamperes **Typical Efficiency:** Up to approximately ninety-three percent, depending on the application circuit and external components **Dimming Methods:** Analog dimming and pulse-width-modulation dimming **Analog Dimming Range:** One percent to one hundred percent **Analog Dimming Dynamic Range:** Greater than one hundred to one **Pulse-Width-Modulation Dimming Ratio:** One hundred to one at a two-hundred-hertz dimming frequency **Pulse-Width-Modulation Frequency Range:** Approximately one hundred hertz to one kilohertz **Full-Brightness Current Accuracy:** Approximately plus or minus three percent **Low-Level Dimming Current Accuracy:** Approximately plus or minus twelve percent at twenty-percent dimming **Soft-Start Function:** Externally programmable **Fault Output:** Active-low open-drain fault indicator **Protection Features:** Output overvoltage protection, LED open-circuit protection, output undervoltage protection, LED short-circuit protection, cycle-by-cycle overcurrent limitation, current-sense resistor short-circuit protection, inductor and diode short-circuit detection, diode open-circuit protection and thermal shutdown **Automotive Qualification:** AEC-Q100 Grade One qualified **Automotive Documentation:** PPAP capable **Manufacturing Standard:** Manufactured in IATF-certified automotive facilities **Operating Temperature Range:** Minus forty degrees Celsius to positive one hundred twenty-five degrees Celsius **Package Type:** Thermally enhanced SO-8 exposed-pad package **Pin Count:** Eight leads with exposed thermal ground pad **Mounting Style:** Surface mount **Packing Method:** Thirteen-inch tape and reel **Standard Packing Quantity:** Two thousand five hundred components per reel **Moisture Sensitivity:** Level One **Terminal Finish:** Matte-tin-plated leads **Environmental Compliance:** Lead-free, RoHS compliant, halogen-free and antimony-free **Typical Applications** Automotive high-beam and low-beam lighting Automotive daytime running lights Automotive fog lights Automotive turn-signal lights Automotive position lights Automotive brake and stop lights High-power exterior LED lighting Multi-topology automotive LED driver modules #AL8866QSP13 #AL8866Q #DiodesIncorporated #LEDDriver #AutomotiveLED #AutomotiveElectronics #BuckConverter #BoostConverter #BuckBoostConverter #SEPICConverter #PowerElectronics #LEDLighting #ElectronicComponents #EngineeringSpecifications

The TPS6213x series, manufactured by Texas Instruments, includes highly efficient, easy-to-use synchronous step-down DC-DC converters optimized for applications requiring high power density. These converters operate within a wide input voltage range from 3 V to 17 V and are capable of delivering up to 3 A of continuous output current. The series comprises multiple part numbers, namely TPS62130, TPS62130A, TPS62131, TPS62132, and TPS62133, each offering unique output configurations—adjustable outputs for TPS62130 and TPS62130A, and fixed outputs of 1.8 V, 3.3 V, and 5.0 V for TPS62131, TPS62132, and TPS62133 respectively. Key features of the TPS6213x series include the advanced DCS-Control™ topology for improved transient response and high output voltage accuracy, a programmable soft start, seamless transition to power save mode, and selectable operating frequency (either 1.25 MHz or 2.5 MHz). The device also encapsulates robust protection mechanisms such as short circuit and overtemperature protection. Housed in a compact 3-mm x 3-mm QFN-16 package, the IC includes additional functions like a power-good output and 100% duty cycle mode for low dropout conditions. With a highly integrated design that requires minimal external components, the TPS6213x series is ideal for step-down regulation in various applications including standard 12-V rail supplies, POL supplies, embedded systems, and portable devices.

Linear Voltage Regulator IC Positive Fixed 1 Output 500mA SOT-23-5 The TLV75533PDBVR is a low-dropout (LDO) linear voltage regulator designed to provide a stable 3.3 V output from a higher input voltage source. It features ultra-low quiescent current and high power-supply rejection ratio (PSRR), making it ideal for battery-powered and noise-sensitive applications such as IoT devices, portable electronics, and RF circuits. The device is optimized for fast transient response and stable operation with small ceramic output capacitors. Key Features Fixed output voltage: 3.3 V Low dropout voltage (typ. ~200 mV at full load) Ultra-low quiescent current (typ. 25 µA) High PSRR for noise-sensitive applications Stable with small ceramic capacitors (≥1 µF) Thermal shutdown and overcurrent protection Available in compact SOT-23-5 package (DBV) Absolute Maximum Ratings Input voltage: –0.3 V to 6.5 V Output voltage: –0.3 V to (VIN + 0.3 V) Operating junction temperature: –40°C to +125°C Storage temperature range: –65°C to +150°C Recommended Operating Conditions Input voltage range: 1.45 V to 5.5 V Output voltage: 3.3 V (fixed) Output current: up to 500 mA Operating temperature range: –40°C to +125°C Electrical Characteristics (Typical unless otherwise noted) Output voltage accuracy: ±1% Dropout voltage: ~200 mV @ 500 mA Quiescent current: ~25 µA PSRR: up to 70 dB (at 1 kHz) Line regulation: <0.05%/V Load regulation: <0.5% Pin Configuration (SOT-23-5) Pin 1: IN – Input voltage Pin 2: GND – Ground Pin 3: EN – Enable (active high) Pin 4: NC – No connect Pin 5: OUT – Regulated output Typical Application Power management for microcontrollers and sensors Battery-powered portable devices RF and analog circuits requiring low noise supply IoT and wearable electronics Protection Features Thermal shutdown protection Overcurrent protection Undervoltage lockout (UVLO) #commonpartsLibrary #integratedcircuit #powermanagement #voltageregulator

Single output buck-boost converter 130nA input quiescent current 96% peak efficiency (VIN = 3.6V; VOUT = 3.3V) Output current: up to 400mA (VIN > 2.5V, VOUT = 3.3V) Input voltage range: 1.8V to 5.5V, supports single-cell Li-ion, 2x or 31.5V AA/AAA batteries Output voltage range: 1.8V to 5.0V Output voltage control using a pin reader (RAA236105) Selectable input current limit DVS with settable slew rate control Selectable forced bypass power saving mode PWM/PFM and buck/bo Input voltage range: 1.8 V to 5.5 V Output voltage range: 1.8 V to 5.0 V (programmable) Output current: up to 400 mA Peak efficiency: up to ~96% Quiescent current (IQ): ~100 nA class (ultra-low power mode) Very low standby consumption (ideal for battery-powered systems) Bypass mode available for near-zero regulation overhead Topology: Synchronous buck-boost converter Can step up or step down voltage automatically Maintains stable output even when input varies above/below output #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Voltage-regulator #Switching-regulator #RAA2361052

Automotive H-Bridge DC Motor Driver IC – Fully integrated 40 V H-bridge motor driver with integrated power MOSFETs for brushed DC motors and one winding of a bipolar stepper motor. Operates from a 4 V to 40 V supply, delivers up to 5 A continuous output current, and features a PWM control interface with integrated current-sense output for motor monitoring. Includes an internal charge pump for high-side gate drive, low-RDS(on) MOSFETs, current regulation, undervoltage lockout (UVLO), overcurrent protection (OCP), thermal shutdown, and shoot-through protection. Qualified to AEC-Q100 Grade 1, operates over a −40°C to +125°C junction temperature range, and is housed in an 18-pin QFN (3 × 4 mm) wettable-flank package. #MonolithicPowerSystems #MPS #MPQ6612AGLEAEC1P #MPQ6612A #MotorDriver #HBridge #BrushedDCMotor #StepperMotor #CurrentSense #PWM #PowerMOSFET #AECQ100 #Automotive #EmbeddedSystems