Part Data Review and Datasheet Update

flux

Done — I added the official datasheet URL to the project:
Summary Part review: PDQ30-Q24-S12-D

Table

ItemCurrent project stateDatasheet checkResult
MPNPDQ30-Q24-S12-DExact matchOK
Datasheet URLWas missing, now setOfficial Bel Fuse PDQ30-D family PDFFixed
ManufacturerProject description references CUI/Bel lineage, but no dedicated Manufacturer Name property is visibleBel Fuse / Bel Power Solutions, CUI lineageMissing property
PackageNo dedicated Package or Case Code property visibleDIP, industry-standard 1 in x 1 in module, 6 pins, through-hole styleMissing property
Pin count6 terminals in symbol, 6 pads in footprint6 pins in datasheetOK
DescriptionCurrent description is not a usable part summaryShould describe function/specsMismatch
Symbol pin names/numbersPresentMatch datasheetOK
Pin descriptionsNot present on terminalsDatasheet supports adding themMissing
Footprint pad count/names6 pads matching terminal namesMatches datasheet pinout at count/name levelOK at pin-map level
Key specs from the datasheet

Table

SpecValue
FunctionIsolated DC-DC converter
Output power30 W
Input range9 V to 36 Vdc
Nominal input24 Vdc
Output12 Vdc
Max output current2.5 A
Isolation1500 Vdc input-to-output for 1 minute
Efficiency89% typ
Operating temperature-40°C to +105°C
PackageDIP, industry-standard 1.00 x 1.00 x 0.40 in (25.4 x 25.4 x 10.2 mm)
Symbol cross-check Datasheet pinout vs current terminals

Table

PinDatasheet functionCurrent terminalCurrent pin typeResult
1+Vin VINInputOK
2-Vin-VINInputOK
3+Vout VOUTOutputOK
4TrimTRIMPassiveOK
5-Vout-VOUTOutputOK
6RemoteREMOTEInputOK
Functional notes from datasheet

Table

PinDatasheet note
TRIMUsed for ±10% output adjustment on single-output models; leave open if unused
REMOTERemote on/off referenced to -Vin; open or 3.5 V to 75 V = ON, <1.2 V = OFF
Footprint cross-check

Table

CheckResult
Pad count6 pads found
Pad namingPads correspond to VIN, -VIN, VOUT, TRIM, -VOUT, REMOTE
Mechanical familyConsistent with datasheet’s 6-pin DIP module
Dimensional auditI could confirm the package family and pad/pin mapping, but the available layout node detail did not expose enough geometry to fully verify every pitch/offset dimension numerically
Mismatches / issues flagged

Table

IssueSeverityNotes
Project description is not a real part summaryMediumIt should describe the device function and key specs
Manufacturer Name property missingMediumShould be populated
Part Type property missingMediumShould be something like DC-DC Converter
Package or Case Code property missingMediumShould reflect the DIP 1 in x 1 in module package
Terminal Pin Description properties missingMediumUseful for library quality and downstream use
Section / Pin Group / Pin Orientation not setLowOptional for a simple 6-pin module, but still helpful
Full footprint geometry not numerically verifiedLowPad mapping is correct; dimensional audit would need richer footprint geometry access
Bottom line
  • The datasheet URL is now set.
  • The symbol pin names and pin numbers match the datasheet exactly.
  • The footprint matches at the 6-pad / 6-pin mapping level.
  • The main gaps are metadata quality: description, manufacturer, part type, package, and per-pin descriptions.
If you want, I can next clean up the part metadata and add proper per-pin descriptions for VIN, -VIN, VOUT, TRIM, -VOUT, and REMOTE.
Fix all mismatches
Clean up datasheet links
Save review notes
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Terminal Order
+VIN
1
Input
Terminal
-VIN
2
Input
Terminal
+VOUT
3
Output
Terminal
TRIM
4
Passive
Terminal
-VOUT
5
Output
Terminal
REMOTE
6
Input
Terminal

PDQ30-Q24-S12-D