Character Display Module Reflective 5 x 8 Dots TN - Twisted Nematic Without Backlight Parallel 66.00mm x 26.00mm x 6.50mm #commonpartslibrary #character #displaymodule #optoelectronic #led

Cellular, Navigation BeiDou, EDGE, Galileo, GLONASS, GPS, GNSS, GSM, LTE, WCDMA Transceiver Module 900MHz, 1.561GHz, 1.575GHz, 1.602GHz, 1.8GHz Antenna Not Included Card Edge #commonpartslibrary #wireless #gps #transceiver #module #rf

Isolated Module DC DC Converter 2 Output 24V -24V - 125mA, 125mA 9V - 36V Input 24-DIP Module, 8 Leads #CommonPartsLibrary #PowerSupply #DCDCConverters #JTE0624

Character Display Module 5 x 32 Dots OLED I²C, SPI 60.96mm x 26.00mm x 2.40mm #OLED

Bluetooth Bluetooth v5.0 Transceiver Module 2.4GHz Integrated, Trace Surface Mount #commonpartslibrary #transceiver #module #bluetooth #wireless #rf

General ISM > 1GHz Transceiver Module 30MHz ~ 6GHz Antenna Not Included Surface Mount #commonpartslibrary #transceiver #module #wireless #rf

STM32G474 Nucleo-64 STM32G4 ARM® Cortex®-M4 MCU 32-Bit Embedded Evaluation Board #Module #part #STM32G4

1 Port RJ45 Through Hole 1G Base-T, AutoMDIX, Power over Ethernet (PoE) RJ45 MagJack® integrated connector module for Gigabit Ethernet interfaces, combining an RJ45 connector with integrated magnetics for 1000BASE-T networking. It features a 1×1 port configuration, supports 4PPoE up to 100 W, includes GO/Y status LEDs, uses a through-hole mounting style with tab-up orientation, and is specified for operation from **−40°C to +85°C. #EthernetConnector #RJ45 #MagJack #IntegratedMagnetics #1000BASET #PoE #ThroughHole #BelFuse

- ESP32-WROOM-32UE Transceiver; 802.11 b/g/n (Wi-Fi, WiFi, WLAN), Bluetooth® Smart Ready 4.x Dual Mode 2.4GHz Evaluation Board The ESP32-DEVKITC-32UE is a development board based on the ESP32 series SoC designed by Espressif. It is widely used for IoT, embedded systems, and wireless communication applications due to its built-in Wi-Fi and Bluetooth capabilities. Microcontroller: ESP32 dual-core Tensilica LX6 processor Wireless Connectivity: Wi-Fi (802.11 b/g/n) and Bluetooth (Classic + BLE) Flash Memory: Integrated SPI flash (varies by module version) Development Interface: USB-to-UART bridge for easy programming and debugging Power Supply: Typically powered via USB or external 5V input GPIO Pins: Multiple multifunction GPIOs supporting ADC, DAC, PWM, SPI, I2C, UART, etc. Supports deep sleep and ultra-low power modes Multiple peripheral interfaces (SPI, I2C, UART, SDMMC, PWM) Compatible with ESP-IDF, Arduino IDE, and MicroPython Built-in antenna (UE variant uses U.FL or external antenna option depending on module design) IoT devices and smart home systems Wireless sensor networks Data logging and monitoring systems Robotics and automation Embedded control systems #commonpartslibrary #developmentboard #esp32 #wroom

RF Modules Wio-SX1262 Wireless Module (Bulk), SX1262 embedded, supports LoRa&LoRaWAN on EU868 & US915

Enclosed AC DC Converters 2 Output 15V 340mA, 340mA 80 ~ 305 VAC Input The RAC10-K/277 series are highly efficient PCB-Mount power conversion modules with ultra-low energy losses even in light load conditions. Built for worldwide usage, the AC/DC units cover an enhanced mains input range of 85VAC up to 305VAC and come with international safety certifications for both industrial and household standards. These AC/DC modules offer fully protected single or dual outputs as well as EMC Class B compliance without the need of any external components. The 140% peak power capability makes the RAC10-K/277 series suitable for inductive, high start-up current or nonlinear loads. With a full load temperature range of -40°C to +65°C, they are ideal for always on and standby mode operations in process automation, IoT and smart building applications. Input voltage: 85 VAC to 305 VAC (wide-range, including 277 VAC industrial lines) Output: Dual output (±15 V DC) Power rating: 10 Watts Isolation: Fully isolated AC to DC conversion Encapsulation: Fully sealed/potted module for safety and reliability #CommonPartsLibrary #power-supply #RAC10-15

20W ultra-small series module power supply #commonpartslibrary #powersupply

IC RF TxRx + MCU Cellular CDMA, GSM, HSPA, LTE, TD-SCDMA, WCDMA 100kHz ~ 3.8GHz 261-SMD Module The LMS7002M is a Field Programmable RF (FPRF) transceiver that can both transmit and receive radio signals over a very wide frequency range. It integrates most of the RF front-end and baseband processing functions into a single chip, minimizing the need for external components. Frequency range: 100 kHz to 3.8 GHz Architecture: Dual transceiver (2 TX + 2 RX) supporting 2×2 MIMO Bandwidth: Up to ~120–160 MHz RF bandwidth depending on configuration Technology: CMOS-based for low cost and power consumption Integrated blocks: ADCs & DACs (12-bit) LNAs and PA drivers Mixers, PLL synthesizers Filters and gain control On-chip DSP and microcontroller Transmit path: Digital baseband → DAC → filtering → RF upconversion → output Receive path: RF input → LNA → downconversion → filtering → ADC → digital processing This zero-IF (direct conversion) architecture simplifies design and supports wideband operation. #CommonPartsLibrary #IntegratedCircuit #LMS7002

STM32H753ZI Nucleo-144 STM32H7 ARM® Cortex®-M7 MCU 32-Bit Embedded Evaluation Board #Module #Part

LoRaWAN Transceiver Module 868MHz, 915MHz Antenna Not Included Surface Mount #SeeedStudio #LoRaWAN #stm32 #arm #iot

Bluetooth, WiFi 802.11b/g/n, Bluetooth v4.2 +EDR, Class 1, 2 and 3 Transceiver Module 2.412GHz ~ 2.484GHz Integrated, Trace Chassis Mount #commonpartslibrary #transceiver #module #wireless #rf

RJ45, Single Port, 10/100/1G/5G Base-T Magnetics Module ,-40C~85C,wave #CommonPartsLibrary #Connector #Ethernet-connector #ARJM11

Isolated Module DC DC Converter 1 Output 12V 2.5A 9V - 36V Input The PDQ30-Q24-S12-D is a compact isolated DC-DC converter module from CUI Inc. (also associated with Bel Power Solutions product lines). It is designed to convert a wide input voltage range (9–36 VDC) into a regulated 12 VDC output. This module delivers up to 30 watts of power and is packaged in a through-hole 6-DIP form factor, making it suitable for PCB mounting in industrial and embedded applications. It integrates isolation, regulation, and protection features, providing a reliable power solution for sensitive electronic systems. Key Features Power & Electrical Output power: 30 W Output voltage: 12 VDC Output current: up to 2.5 A Input voltage range: 9 – 36 VDC (wide range) Efficiency: up to ~89% Isolation & Protection 1.5 kV isolation voltage Built-in protections: Overcurrent (OCP) Overvoltage (OVP) Overtemperature (OTP) Short circuit protection (SCP) Undervoltage lockout (UVLO) Design & Integration Through-hole 6-DIP package (easy PCB mounting) Compact size: ~25.4 × 25.4 mm Single output design Remote On/Off control (Enable pin) Environmental Operating temperature: –40°C to +105°C Designed for industrial and commercial (ITE) applications Typical Applications Industrial automation systems Telecom and networking equipment Embedded control systems Robotics and process control Power distribution in PCB designs #CommonPartsLibrary #power-supply #DCDC-Converter #PDQ30-D (30W)

Transceiver Module EG800KEULC-I03-SNNSA is an LTE Cat 1 bis wireless communication module from Quectel designed for compact Machine-to-Machine (M2M) and Internet of Things (IoT) applications. The module delivers reliable 4G LTE connectivity with download speeds of up to 10 Mbps and upload speeds of up to 5 Mbps, making it suitable for asset tracking, smart metering, industrial automation, POS terminals, security systems, and remote monitoring. The I03-SNNSA variant is configured without GNSS, Bluetooth, and VoLTE, while supporting optional Wi-Fi Scan, remote firmware updates (DFOTA), and multiple communication interfaces including UART, USB 2.0, and I²C. Its compact 17.7 × 15.8 × 2.4 mm LGA package enables easy integration into space-constrained embedded designs. Key Features LTE Cat 1 bis cellular communication Maximum data rates: 10 Mbps (Downlink) / 5 Mbps (Uplink) Compact 17.7 × 15.8 × 2.4 mm LGA package No GNSS, Bluetooth, or VoLTE (I03-SNNSA variant) Optional Wi-Fi Scan support Supports DFOTA (Delta Firmware Over-the-Air) updates USB 2.0 High-Speed, UART, and I²C interfaces Wide operating temperature range: -40°C to +85°C Optimized for M2M and IoT applications with low power consumption Compatible with various embedded operating systems and industry-standard AT commands #Quectel #EG800K #LTECat1bis #4GModule #IoT #M2M #WirelessCommunication #EmbeddedSystems #IndustrialIoT #RemoteMonitoring #AssetTracking #SmartDevices #DFOTA #LGA #CellularModule

BDS/GPS/GLONASS multi-mode satellite positioning and navigation module SMD,10.5x9.7mm GNSS Modules ROHS #Module #GNSS

Pressure Sensor 203.05PSI (1400kPa) Absolute 24 b 8-SMD Module The MS580314BA01-00 is a high-resolution digital absolute pressure sensor module from TE Connectivity Measurement Specialties. It integrates a precision MEMS pressure sensing element, a 24-bit ΔΣ ADC, and factory-calibrated coefficients to provide highly accurate digital pressure and temperature measurements. The sensor supports both I²C and SPI communication interfaces, making it easy to interface with a wide range of microcontrollers while requiring minimal external components. It is designed for low-power, high-accuracy applications such as altimeters, depth measurement systems, weather monitoring, industrial pressure sensing, and portable instrumentation. Key Features Digital absolute pressure sensor with integrated MEMS sensing element High-resolution 24-bit ΔΣ ADC with factory calibration Supports I²C and SPI digital interfaces Pressure range up to 14 bar (1400 kPa / 203 psi) Supply voltage: 1.8 V to 3.6 V Integrated temperature measurement for compensation and monitoring Low power consumption, suitable for battery-powered devices Operating temperature range: −40°C to +85°C Excellent long-term stability with low hysteresis Compact 8-SMD module for surface-mount PCB assembly Requires few or no external components for operation #PressureSensor #MEMS #AbsolutePressure #DigitalSensor #24BitADC #I2C #SPI #LowPower #IndustrialElectronics #Altimeter #DepthMeasurement #WeatherMonitoring #TEConnectivity #SurfaceMount #EmbeddedSystems