Part Datasheet Review and Update

flux

I reviewed the part project against the datasheet using the standard part-project datasheet-sync workflow: verify the datasheet URL first, then compare project metadata, terminal count/pin mapping, and footprint presence against the official datasheet.
Status
  • Datasheet URL: already present, so no web search/update was needed
  • Datasheet source used: official RECOM PDF already stored on the project
  • Overall result: pin count and pin naming look good, but the part metadata and terminal properties are incomplete
Key specs from the datasheet

Table

ItemDatasheet value
MPNRAC10-15DK/277
ManufacturerRECOM
Function10 W PCB-mount regulated dual-output AC/DC converter module
Input range85-305 VAC or 120-430 VDC
Output±15 VDC
Output current±340 mA
Efficiency83% typ.
Isolation4 kVAC / 1 min
Operating temperature-40°C to +80°C
Package / styleEncapsulated PCB-mount module, 52.5 x 27.4 x 23.0 mm, 5 pins
Project metadata review

Table

PropertyCurrent projectDatasheetResult
Manufacturer Part NumberRAC10-15DK/277RAC10-15DK/277OK
Manufacturer NameRECOM PowerRECOMMinor mismatch
Datasheet URLSet to official RECOM PDFOfficial PDFOK
Designator PrefixPSNot explicit in datasheetReasonable
Part TypeElectromechanical ComponentsAC/DC power converter moduleMismatch
Package / Case CodeMissing5-pin encapsulated PCB module, 52.5 x 27.4 x 23.0 mmMissing
Description"Recom 10W Dual Output Encapsulated Switch Mode Power Supply, +/-340mA, +/-15V dc"Consistent with datasheetOK
Symbol / pin cross-check
The datasheet defines 5 pins for the dual-output version, and the project also has 5 terminals, which matches the required exact pin-count rule for part verification.
Datasheet pinout

Table

PinDatasheet function
1VAC in (N)
2VAC in (L)
3-Vout
4COM
5+Vout
Comparison to current symbol

Table

CheckResult
Pin countMatch
Pin numbersMatch
Pin names / labelsMatch
Missing pinsNone found
Extra pinsNone found
Pin Type propertyAll terminals are currently Unspecified
Pin Description propertyNot present / not populated
Section / Pin Group / OrientationNot populated
Recommended pin-type mapping

Table

PinRecommended Pin Type
VAC in (N)Power In
VAC in (L)Power In
-VoutPower Out
COMGround or Power Out return depending on your library convention
+VoutPower Out
Footprint cross-check

Table

CheckResult
Pad count5 pads present
Pad naming vs pin namingAppears consistent
Footprint existsYes
Full dimensional verificationNot fully verifiable from current layout data alone
What I can confirm:
  • The footprint contains 5 pads, matching the datasheet pin count.
  • The pad names align with the same five pin labels used by the symbol.
What I cannot fully confirm from the currently exposed layout data:
  • Exact pad-to-pad spacing
  • Exact hole diameter / drill
  • Exact body outline placement
  • Whether the footprint fully matches the datasheet mechanical drawing dimensions
The datasheet indicates a 52.5 x 27.4 x 23.0 mm module with a 5-pin through-hole style layout and shows mechanical dimensions including Ø1.0 and multiple spacing callouts, but the current tool output does not expose enough pad geometry to numerically compare every footprint dimension. So this is partially verified, not fully dimension-verified.
Mismatches and issues flagged

Table

SeverityItemNotes
MediumPart Type incorrectElectromechanical Components does not match the datasheet; this is an AC/DC converter / power module
LowManufacturer name differsProject says RECOM Power; datasheet extraction says RECOM
MediumPackage / case metadata missingShould include the encapsulated PCB module style and/or dimensions
MediumPin types missingAll five terminals are Unspecified
MediumPin descriptions missingShould be short functional descriptions
LowSection / orientation metadata missingUseful for a cleaner reusable part symbol
Suggested property cleanup

Table

FieldSuggested value
Part TypeAC/DC Converter or Power Module
Manufacturer NameRECOM
Package or Case Code5-pin encapsulated PCB module, 52.5 x 27.4 x 23.0 mm
Description10 W dual-output AC/DC converter module, 85-305 VAC input, ±15 V outputs at ±340 mA
Bottom line
  • Good: MPN, datasheet URL, terminal count, terminal names, and pin numbers all align with the datasheet.
  • Needs correction: part classification metadata, package metadata, pin types, and pin descriptions.
  • Footprint: structurally plausible and consistent at a high level, but not yet dimensionally proven from the currently available layout detail.
If you want, I can now update the project metadata and terminal properties to match the datasheet.
Fix metadata and pins
Check footprint dimensions
Run project review
Sign up to send

Files

Pins

Symbol

Layout

Preview

Name
Pin #
Type
Part Type
Terminal Order
VAC_IN_(N)
1
Unspecified
Terminal
VAC_IN_(L)
2
Unspecified
Terminal
-VOUT
3
Unspecified
Terminal
COM
4
Unspecified
Terminal
+VOUT
5
Unspecified
Terminal

RAC10-15DK/277