Charger IC Lithium Ion/Polymer 18-WQFN-HR (3x2.5) The BQ25622RYKR is a highly integrated standalone switch-mode battery charge management and system power-path management device designed for single-cell lithium-ion and lithium-polymer batteries. The device integrates a high-efficiency synchronous buck charger, system power-path control, input current management, and battery protection functions into a compact solution optimized for portable and embedded applications. The device supports USB and external adapter power sources while providing programmable charging parameters through an I²C interface. Integrated power MOSFETs and advanced power management features reduce external component count and improve overall system efficiency. The charger incorporates dynamic power management, thermal regulation, battery temperature monitoring, and multiple safety protections to ensure reliable operation under varying load and environmental conditions. The BQ25622 family is designed for compact battery-powered systems requiring efficient charging, intelligent power-path control, and low system power consumption. Engineering Specification Manufacturer: Texas Instruments Device Type: Single-Cell Li-Ion/Li-Polymer Switching Battery Charger with Integrated Power-Path Management Battery Chemistry Support: Lithium-Ion and Lithium-Polymer Charging Topology: Synchronous Buck Switching Charger Input Power Sources: USB Input and External DC Adapter Support Charge Current Capability: Programmable Fast Charge Current Support Communication Interface: I²C Serial Communication Interface Integrated Power Devices: Internal High-Side and Low-Side MOSFETs Charging Features: Precharge Mode Fast Charge Mode Charge Termination Automatic Recharge Programmable Charge Parameters Safety Timer Control Power Management Features: Dynamic Power-Path Management Input Current Optimization Narrow Voltage DC Regulation Input Voltage Regulation System Voltage Regulation Monitoring and Reporting Features: Charge Status Monitoring Fault Status Reporting Battery Temperature Monitoring through NTC Interface Input Source Detection Protection Features: Input Overvoltage Protection Battery Overvoltage Protection Thermal Shutdown Protection Thermal Regulation Input Current Limiting Short-Circuit Protection Safety Timer Protection Package Type: WQFN Package Package Variant: RYK Mounting Type: Surface Mount Typical Applications: Portable Consumer Electronics Embedded Battery-Powered Devices IoT Systems Handheld Industrial Equipment USB-Powered Systems Wearable Electronics Portable Medical Devices #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

I²C-Controlled Single-Cell Buck Battery Charger IC with Power Path Management – Highly integrated switch-mode battery charger for single-cell Li-Ion/Li-Polymer batteries used in portable electronics, IoT devices, wearables, handheld terminals, medical devices, and embedded battery-powered systems. Operates from a 3.5 V to 18 V input supply and delivers up to 2 A programmable charging current with support for USB and adapter inputs. Features NVDC power-path management, I²C interface, integrated power MOSFETs, narrow VDC architecture, dynamic power management, input current optimization, buck charging efficiency up to 93%, and an integrated 12-bit ADC for monitoring battery voltage, charge current, input voltage/current, system voltage, and temperature. Includes JEITA temperature profile support, programmable charging parameters, USB OTG boost mode (5 V output), power-good indication, and comprehensive protection including overvoltage, overcurrent, thermal regulation, thermal shutdown, watchdog timer, and short-circuit protection. Operates over a −40°C to +85°C temperature range and is housed in a compact 18-pin WQFN-HR (3 × 2.5 mm) package. #TexasInstruments #BQ25628ERYKR #BQ25628E #BatteryCharger #LiIonCharger #PowerPathManagement #BuckCharger #USBOTG #I2C #PowerManagement #PortableElectronics #EmbeddedSystems

Battery Power Management IC Multi-Chemistry 14-TSSOP The bq34210-Q1 1-Series Cell System-Side CEDV Fuel Gauge provides fuel gauging and End-of-Service (EOS) Determination for 1-series cell batteries in applications that encounter infrequent discharge, such as eCall systems and uninterruptible power supplies (UPS) for backup during power failures, where batteries may stay connected to a charging power source most of their lifetime until needed. The bq34210-Q1 fuel gauge supports multiple battery chemistries, including Li-Ion, LiFePO4, and NiMH. The gas gauging function uses voltage, current, and temperature data along with Compensated End-ofDischarge (CEDV) technology to provide State-ofCharge (SOC) and State-of-Health (SOH) data. The device's EOS Determination function alerts when battery capability has degraded and is approaching the end of its usable service. Battery fuel gauging with the bq34210-Q1 fuel gauge requires connections only to PACK+ (P+) and PACK– (P–) for a removable battery pack or embedded battery management system. Features 1• Automotive-Qualified AEC-Q100, Grade 3 • 1-Series Cell Battery Fuel Gauge Supports Li-Ion, LiFePO4, and NiMH (3-Cell) Chemistries – Resides on System Board – Powers Directly from the Battery with Integrated LDO – Supports a Low-Value External Sense Resistor (10 mΩ) • Learning Load Enable (LEN) from Host • Ultra-Low Power Consumption in NORMAL (50 µA) and SLEEP (9 µA) Modes • Supports Replacement Batteries • Accurate End-of-Service (EOS) Determination for Batteries in Rarely Discharged Applications • CEDV Gas Gauge for 1-Series Cell Batteries, Providing: – State-of-Charge (SOC) – Time-to-Empty (TTE) – State-of-Health (SOH) • High-Side and Low-Side Current Sensing Options • Internal Temperature Sensor OR External Thermistor • Microcontroller Peripheral Interface Supports: – 400-kHz I 2C™ Serial Interface – Configurable Interrupt (ALERT) for SOC, Battery Levels, Temperature Faults, and Charge/Discharge Status 2 Applications • eCall Systems • Telematics Backup Systems • Uninterruptible Power Supply (UPS) Backup Systems • Emergency Battery Power Modules #BatteryFuelGauge #BatteryManagement #FuelGaugeIC #AutomotiveElectronics #TexasInstruments #LiIonBattery #LiFePO4 #I2C #PowerManagement #AECQ100 #BackupBattery #UPS #EmbeddedSystems

Overvoltage/Surge Protection IC Internal Switch 20-WQFN (3x3) ESD protection and USB charging-port interface IC for USB 2.0 data lines, integrating IEC 61000-4-2 ±15 kV air and ±8 kV contact ESD protection with support for USB Battery Charging Specification Rev. 1.2 charger detection. It operates from a 2.5 V to 5.5 V supply, includes an integrated high-side VBUS switch rated for up to 1.5 A, and is housed in a 6-pin WQFN (RUK) package. #ESDProtection #USB2_0 #USBCharging #BC1_2 #VBUSSwitch #InterfaceIC #TexasInstruments #WQFN6

Battery Battery Protection IC Lithium Ion/Polymer SOT-23-6 S-8261ABJMD-G3JT2G is a high-accuracy lithium-ion/lithium-polymer battery protection IC designed for single-cell battery packs. It integrates voltage detection and timing circuits to protect rechargeable batteries against overcharge, overdischarge, overcurrent, and short-circuit conditions, helping improve battery safety, reliability, and lifespan. The device is commonly used in portable electronics, battery packs, IoT devices, and handheld equipment. It is housed in a compact SOT-23-6 package suitable for space-constrained designs. Key Features Single-cell Li-ion / Li-polymer battery protection IC High-accuracy overcharge detection High-accuracy overdischarge detection Overcurrent and short-circuit protection Built-in delay circuits to prevent false triggering Low current consumption (typical operating current in the µA range) Wide operating voltage range Support for 0 V battery charging function Compact SOT-23-6 package RoHS compliant and lead-free version available Typical Applications Li-ion battery packs Li-polymer battery packs Portable consumer electronics Wireless sensors and IoT devices Handheld instruments Rechargeable battery-powered equipment #BatteryProtectionIC #LiIonBattery #LiPoBattery #PowerManagement #BatteryPackProtection #OverchargeProtection #OverdischargeProtection #ShortCircuitProtection #SOT23 #ABLIC #SeikoInstruments #PortableElectronics #RechargeableBattery #PMIC #SingleCellBattery

I²C Controlled 3A Single-Cell Battery Charger with High Input Voltage Capability and Narrow Voltage DC (NVDC) Power Path Management Battery charger IC for single-cell Li-Ion and Li-Polymer batteries with an input voltage range of 3.9V to 13.5V. Supports up to 3A programmable charge current, 5A boost output, and integrates power-path management, input current/voltage regulation, I²C interface, and comprehensive charging and protection functions in a TQFN-24 (4mm × 4mm) package. #BatteryChargerIC #SingleCellLiIon #LiPolymer #3ACharge #5ABoost #PowerPathManagement #I2C #InputVoltageRegulation #TQFN24 #SGMICRO

USB 3.1 QFN-64 Interface Controllers RoHS 4.75V~5.25V,0~+70,Channels 2 GL3510 is a low-power USB 3.1 Gen1 hub controller from Genesys Logic available in 2-port and 4-port configurations. It integrates USB 3.1 Gen1 SuperSpeed PHY and USB 2.0 High-Speed PHY, providing backward compatibility with USB 2.0 and USB 1.1 devices. The controller includes integrated 5V-to-3.3V and 5V-to-1.2V regulators, reducing external component count and PCB complexity. GL3510 supports USB Battery Charging Specification BC1.2, including Charging Downstream Port (CDP) and Dedicated Charging Port (DCP) modes, allowing fast charging of smartphones, tablets, and portable devices even during system sleep or power-off states. Suitable for USB hubs, docking stations, industrial computers, embedded systems, monitors, and consumer electronics. Search Keywords: GL3510, GL3510-52, Genesys Logic GL3510, USB 3.1 hub controller, USB hub IC, USB 3.1 Gen1 hub, SuperSpeed USB hub controller, USB 2.0 hub controller, 4-port USB hub, 2-port USB hub, USB BC1.2 controller, charging downstream port controller, dedicated charging port controller, USB docking station controller, embedded USB hub, USB expansion controller, USB host interface, QFN64 USB hub, QFN48 USB hub GL3510 Hashtags: #GL3510 #GL351052 #GenesysLogic #USBHub #USB31 #USB3Gen1 #SuperSpeedUSB #USBController #USBHubController #BC12 #FastCharging #DockingStation #EmbeddedSystems #IndustrialElectronics #ConsumerElectronics #PCBDesign #ElectronicComponents #USB20 #QFN64 #QFN48

The DW01A is a compact single-cell lithium-ion/lithium-polymer battery protection IC designed to safeguard rechargeable batteries from unsafe operating conditions such as overcharge, overdischarge, overcurrent, and short circuits. It is widely used in battery packs, power banks, TP4056 charging modules, portable electronics, and IoT devices because of its low power consumption and minimal external component requirements. Key Features Single-cell Li-ion/Li-Po battery protection Overcharge protection (typically 4.3V) Overdischarge protection (typically 2.4V) Overcurrent and short-circuit protection Ultra-low quiescent current (~3µA typical) Very low standby/discharge current Drives external dual MOSFETs for charge/discharge control Internal delay timers for noise immunity No external timing capacitors required Compact SOT-23-6 package Wide operating voltage range Automatic recovery after fault removal Typical Applications 18650 battery protection boards Power banks Bluetooth devices Wearables Portable consumer electronics DIY battery-powered projects TP4056 charging modules with protection circuitry #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Stand-alone single-cell linear battery charger with power path BQ24074RGTT is a highly integrated standalone linear charger and power-path management IC from Texas Instruments designed for single-cell Li-Ion/Li-Polymer battery-powered portable devices. It supports charging directly from USB ports or external adapters while simultaneously powering the system load through integrated Dynamic Power Path Management (DPPM). The device is commonly used in portable electronics, IoT devices, wireless accessories, handheld medical devices, and battery-powered embedded systems. Key Features Single-cell Li-Ion/Li-Polymer battery charger Up to 1.5 A programmable charge current Integrated Dynamic Power Path Management (DPPM) USB-compliant charging support Selectable 100 mA / 500 mA USB current limits Programmable input current limit up to 1.5 A Supports both USB input and wall adapters Input overvoltage protection up to 28 V absolute maximum Integrated thermal regulation and thermal shutdown Reverse-current and short-circuit protection Programmable pre-charge and fast-charge safety timers Battery temperature monitoring via NTC thermistor input Charge status outputs for charging/done indication Current monitoring output (ISET) Compact 16-pin VQFN (3×3 mm) package Wide operating temperature range suitable for industrial applications Typical Applications TWS charging cases and earbuds Portable medical devices IoT and asset tracking systems Handheld gaming accessories Video doorbells and IP cameras Portable embedded systems and development boards Important Design Notes Designed specifically for 1-cell battery applications Requires proper thermal PCB layout due to linear charging architecture DPPM allows the system to operate even with a deeply discharged or missing battery Recommended for compact designs needing integrated charging and system power-path control #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Charger IC Lithium Ion/Polymer 29-VQFN-HR (4x4) The BQ25792 is a fully integrated switch-mode buck-boost charger for 1-4 cell Li-ion batteries and Li-polymer batteries. The integration includes 4 switching MOSFETs (Q1, Q2, Q3, Q4), input and charging current sensing circuits, the battery FET (QBAT) and all the loop compensation of the buck-boost converter. It uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. When system power exceeds the input source rating, battery supplement mode supports the system without overloading the input source. BQ25792 supports the full input and output (OTG) voltage ranges for USB Type-C™ and USB power delivery (USB-PD) applications. • High power density, high integration buck-boost charger for 1-4 cell batteries supporting any USB PD 3.0 profile – Integrates four switching MOSFETs, BATFET – Integrates input and charging current sensing • Highly efficient – 750-kHz or 1.5-MHz switching frequencies – 5-A charging current with 10-mA resolution • 96.5% efficient: 16-V battery at 3A from 20V • Supports a wide range of input sources – 3.6-V to 24-V wide input operating voltage range with 30-V absolute maximum rating – Maximum power tracking with input voltage dynamic power management (VINDPM) up to 22 V and input current dynamic power management (IINDPM) up to 3.3 A – Detects USB BC1.2, SDP, CDP, DCP, HVDCP and non-standard adapters • Dual-input power mux controller (optional) for source selection • Narrow voltage DC (NVDC) power path management • Powers USB port from battery (USB OTG) – 2.8-V to 22-V OTG output voltage with 10-mV resolution to support USB-PD PPS – OTG output current regulation up to 3.32 A with 40-mA resolution • Flexible autonomous and I2C mode for optimal system performance • Integrated 16-bit ADC for voltage, current, and temperature monitoring • Low battery quiescent current – 21 µA for battery only operation – 600 nA in Charger Shutdown Mode • High accuracy – +0.65% to -0.85% charge voltage regulation for 2S-4S batteries – ±5% charge current regulation – ±5% input current regulation • Safety – Thermal regulation and thermal shutdown – Input/battery OVP and OCP – Converter MOSFETs OCP – Charging safety timer • Package – 29-Pin 4 mm × 4 mm QFN #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-Charger

Charger IC Lithium Ion 16-VQFN (3x3) The BQ24075QRGTRQ1 is an automotive-qualified standalone linear battery charger and power-path management integrated circuit designed for single-cell Li-Ion and Li-Polymer battery applications. The device integrates battery charging, system power regulation, input current limiting, and dynamic power-path management into a compact solution optimized for portable and embedded automotive systems. The charger supports USB and external adapter power sources while automatically managing system load distribution between the input supply and battery. Integrated thermal regulation and safety protection features improve reliability under varying operating conditions and harsh automotive environments. The BQ24075QRGTRQ1 supports programmable charging parameters, battery temperature monitoring, and power-good status reporting. The device is qualified for automotive applications and is suitable for infotainment systems, telematics, portable instrumentation, embedded battery-powered modules, and industrial handheld equipment. Key Features Automotive-qualified battery charger IC Single-cell Li-Ion and Li-Polymer battery support Integrated dynamic power-path management USB and adapter input compatibility Programmable fast-charge current control Integrated thermal regulation Input current limiting capability Battery temperature monitoring support Automatic charge termination functionality Short-circuit and over-temperature protection Power-good and charging status indication Compact surface-mount package Optimized for portable and embedded applications Electrical Characteristics Linear charging architecture High integration power management solution Dynamic load sharing between system and battery Stable regulated system output Programmable charging voltage and current Thermal foldback protection operation Low standby and shutdown current consumption Integrated safety timer functionality Wide input operating voltage range Applications Automotive infotainment systems Portable embedded electronics Industrial handheld equipment Battery-powered control modules Telematics systems USB-powered charging systems Portable instrumentation Data logging devices Embedded IoT products Rechargeable battery management systems Package Information Package Type: VQFN Mounting Type: Surface Mount Automotive-grade integrated circuit package RoHS compliant configuration available #commonpartslibrary #integratedcircuit #batterycharger #powermanagement #automotiveelectronics #lithiumbattery #embeddedhardware #usbcharging #portableelectronics #powerpathmanagement

- Converter, Battery Powered Devices Voltage Regulator IC 1 Output 30-FC2QFN (4x4) The MAX77960EFV06+ is a fully integrated switching charger and power management IC that supports both step-up (boost) and step-down (buck) operation, making it suitable for USB-C PD applications where input voltage can be higher or lower than the battery voltage. It includes an internal Smart Power Selector™, which intelligently manages power flow between the input source, battery, and system load, enabling smooth system startup even with deeply discharged batteries. This device is widely used in portable electronics, battery-powered systems, drones, cameras, and USB-C PD devices requiring high power efficiency and compact design. Key Features Power & Electrical Specs Input voltage range: 3.5 V to 25.4 V High-efficiency buck-boost operation (up to ~97% peak efficiency) Programmable charging current: 100 mA to 3.15 A (MAX77960 version) Supports 2-cell and 3-cell Li-ion battery charging #CommonPartsLibrary #IntegratedCircuit #PowerManagement

DW01A+G SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR LCSC Part Number: C3020699 JLCPCB Part Class: Extended Part Manufactured by FORTUNE(富晶) Fortune DW01x single-cell lithium-ion/lithium-polymer battery protection IC, designed to protect battery packs from overcharge, overdischarge, overcurrent and charger overvoltage conditions. Features ultra-low 3µA quiescent current, 0.1µA power-down current, accurate ±50mV overcharge detection voltage, selectable 0V battery charging and power-down functions, load detection during overcharge mode, two overcurrent protection levels, internal delay timing, and compact SOT-23-6 green package for small battery protection circuits. Search Keywords: DW01x, DW01, Fortune DW01, DW01 battery protection IC, lithium battery protection IC, Li-ion battery protection IC, Li-polymer battery protection IC, single cell battery protection, 1S battery protection IC, overcharge protection IC, overdischarge protection IC, overcurrent protection IC, SOT-23-6 battery protection IC, DW01A replacement, DW01 datasheet Hashtags: #DW01x #DW01 #FortuneDW01 #BatteryProtectionIC #LiIonProtectionIC #LiPolymerProtectionIC #SingleCellProtection #1SBatteryProtection #OverchargeProtection #OverdischargeProtection #OvercurrentProtection #SOT236

The FS8205A is a dual N-channel enhancement-mode power MOSFET designed primarily for lithium-ion and lithium-polymer battery protection applications. Manufactured by several semiconductor vendors including Fortune Semiconductor, this device integrates two low on-resistance MOSFETs within a compact surface-mount package, enabling efficient bidirectional current control for battery charging and discharging systems. The device is commonly paired with single-cell battery protection controller ICs such as the DW01A to provide overcharge, overdischarge, overcurrent, and short-circuit protection in portable electronic products. Its low drain-to-source resistance minimizes conduction losses and improves overall battery efficiency while maintaining compact PCB layout requirements. The FS8205A is widely used in battery management systems, portable consumer electronics, rechargeable battery packs, USB-powered devices, IoT hardware, and embedded power management circuits requiring reliable load switching and battery protection functionality. Engineering Specification Device Type Dual N-channel power MOSFET Transistor Technology Enhancement-mode MOSFET architecture Channel Configuration Dual independent N-channel MOSFETs Switching Characteristics Low on-resistance for efficient power switching Gate Characteristics Logic-level gate drive compatibility Current Handling Optimized for battery charge and discharge current control Power Efficiency Low conduction loss for improved battery runtime Protection System Compatibility Designed for lithium battery protection controller integration Thermal Characteristics Compact thermal-efficient surface-mount structure Package Type SOP-8 surface-mount package Mounting Style Surface mount technology Reliability Features Stable switching performance and robust load handling capability Applications Lithium-ion battery protection Battery management systems Portable electronics Rechargeable battery packs USB-powered devices Power path switching Embedded systems Consumer electronics IoT hardware Load switching circuits Manufacturer Commonly manufactured by Fortune Semiconductor and compatible vendors #commonpartslibrary #mosfet #dualmosfet #nchannelmosfet #batteryprotection #batterymanagement #powermanagement #powerelectronics #embeddedhardware #consumerelectronics #surfaceountcomponents #electronicsdesign #lithiumbattery #loadswitch #portableelectronics

I²C Controlled Single Cell Fast Charger with MaxCharge™ Technology for High Input Voltage and Adjustable Voltage 3.1A Boost Operation The bq25895M is a highly-integrated 5-A switchmode battery charge management and system power path management device for single cell Li-Ion and Lipolymer battery. The devices support high input voltage fast charging. The low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. The I 2C Serial interface with charging and system settings makes the device a truly flexible solution. • High Efficiency 1.5-MHz Switch Mode Buck Charge – 93% Charge Efficiency at 2 A and 91% Charge Efficiency at 3 A Charge Current – Optimize for High Voltage Input (9 V / 12 V) – Low Power PFM mode for Light Load Operations • Boost Mode Operation with Adjustable Output from 4.5 V to 5.5 V – Selectable 500-KHz / 1.5-MHz Boost Converter with up-to 3.1 A Output – 93% Boost Efficiency at 5 V at 1 A Output – Support down-to 2.5V Battery – Support PWM only or PFM/PWM control for Light Load Efficiency • Integrated Control to Switch Between Charge and Boost Mode • Single Input to Support USB Input and Adjustable High Voltage Adapters – Support 3.9-V to 14-V Input Voltage Range – Input Current Limit (100 mA to 3.25 A with 50- mA resolution) to Support USB2.0, USB3.0 standard and High Voltage Adapters – Maximum Power Tracking by Input Voltage Limit up-to 14V for Wide Range of Adapters – Auto Detect USB SDP, CDP, DCP, and Nonstandard Adapters • Input Current Optimizer (ICO) to Maximize Input Power without Overloading Adapters • Resistance Compensation (IRCOMP) from Charger Output to Cell Terminal • Highest Battery Discharge Efficiency with 11-mΩ Battery Discharge MOSFET up to 9 A • Integrated ADC for System Monitor (Voltage, Temperature, Charge Current) • BATFET Control to Support Ship Mode, Wake Up, and Full System Reset • Flexible Autonomous and I 2C Mode for Optimal System Performance • High Integration includes all MOSFETs, Current Sensing and Loop Compensation • 12-µA Low Battery Leakage Current to Support Ship Mode • High Accuracy – ±0.5% Charge Voltage Regulation – ±5% Charge Current Regulation – ±7.5% Input Current Regulation #CommonPartsLibrary #IntegratedCircuit #PowerManagement