Part Review and Datasheet Verification

flux

I’ll review the part metadata, find and set the official datasheet URL if needed, then validate the symbol, footprint, and pin descriptions against the datasheet and summarize any discrepancies.

flux

Reviewed the BQ34210IPWRQ1 part against the TI bq34210-Q1 datasheet and created the report: Part Review: BQ34210IPWRQ1.
No pinout or footprint mismatch was found; the TSSOP-14 / PW footprint matches the datasheet land pattern closely. Main cleanup items: blank Part Type, all pin types are Unspecified, missing pin descriptions, and the Datasheet URL is an uploaded TI PDF rather than the TI web URL.
A

adrian95

Fix the metadata issues, update pin types and descriptions, then run ERC/DRC.

flux

I’ll update the part metadata and terminal pin properties from the datasheet, then run schematic/layout checks and report any remaining issues.

flux

Updated the BQ34210IPWRQ1 metadata and terminal properties from the TI datasheet: Part Type is set, package/datasheet metadata is present, and all 14 pins now have electrical pin types, descriptions, groups, and sections.
ERC/DRC review completed with no open ERROR, WARNING, UNCERTAIN, or OPEN checks reported.
Suggested next steps:
  • Publish/update the part library record if this is ready for reuse.
  • Optionally standardize NC pin grouping if you prefer a different internal convention.
  • Run a final visual symbol/footprint review before release.
Finalize and export
Publish library part
Final visual review
Export part report
Check commit diffs
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Pin Description
SDA
1
Bi-Directional
Interface
I2C
Open-drain I2C serial data; use typical 10 kΩ pullup to VPU.
SCL
2
Input
Interface
I2C
I2C serial clock input; use typical 10 kΩ pullup to VPU.
VSS
3
Ground
Power
GND
Device ground reference.
NC_1
4
Not Connected
Other
No Connect
No internal connection.
REG18
5
Power Out
Power
Power
1.8 V internal LDO capacitor pin; connect 2.2 µF ceramic capacitor to VSS; not intended as external supply.
NC_2
6
Not Connected
Other
No Connect
No internal connection.
REGIN
7
Power In
Power
Power
Battery voltage and integrated LDO input; connect 1 µF ceramic capacitor to VSS.
NC_3
8
Not Connected
Other
No Connect
No internal connection.
SRN
9
Input
Analog
Analog
Coulomb-counter analog sense input, negative side of sense resistor.
SRP
10
Input
Analog
Analog
Coulomb-counter analog sense input, positive side of sense resistor.
NC_4
11
Not Connected
Other
No Connect
No internal connection.
TS
12
Input
Sensors
Analog
Pack thermistor voltage sense; use 103AT thermistor or disable with 10 kΩ to VSS; do not float.
NC_5
13
Not Connected
Other
No Connect
No internal connection.
ALERT
14
Bi-Directional
Control
Control Bus
Open-drain ALERT interrupt output and wake input from SHUTDOWN; use typical 10 kΩ pullup to VPU.

BQ34210IPWRQ1