Hot Swap Controller 1 Channel General Purpose 32-LQFN (5x5) The NCP81428MNTXG is a high-performance multi-phase synchronous buck controller designed for CPU, GPU, FPGA, ASIC, and high-current core power applications requiring accurate voltage regulation, fast transient response, and high efficiency. The device supports multi-phase operation with integrated gate drivers and advanced control architecture optimized for modern low-voltage, high-current power rails. It is intended for applications requiring dynamic voltage scaling, precise load-line regulation, and reliable system power management in computing, networking, telecommunications, and industrial platforms. The controller operates with external MOSFET stages and supports flexible power stage configuration for optimized thermal and efficiency performance. It incorporates differential voltage sensing, programmable protection features, current balancing between phases, and high-speed transient compensation to maintain stable operation under rapidly changing load conditions. Engineering Specification Manufacturer onsemi Manufacturer Part Number NCP81428MNTXG Device Type Multi-Phase Synchronous Buck Controller with Integrated Gate Drivers Control Topology Voltage Mode Multi-Phase PWM Control Phase Configuration Dual-Phase Controller Architecture Application Focus CPU Core Power GPU Core Regulation FPGA Power Rails ASIC Core Supplies High-Current DC-DC Regulation Input Supply Range Supports Low-Voltage Bias Supply Operation for Digital Power Systems Output Voltage Regulation Programmable Low-Voltage Output Regulation with Differential Remote Sense Capability Switching Frequency Programmable PWM Switching Frequency with Multi-Phase Interleaving Gate Driver Integration Integrated High-Side and Low-Side MOSFET Gate Drivers Current Sensing Supports Inductor DCR Sensing and Sense Resistor Current Monitoring Load-Line Support Programmable Load-Line Regulation and Droop Compensation Voltage Positioning Adaptive Voltage Positioning for Improved Transient Performance Protection Features Overcurrent Protection Overvoltage Protection Undervoltage Protection Thermal Protection Short-Circuit Protection Power-Good Monitoring Power Management Features Soft-Start Control Enable Functionality Phase Balancing Fault Monitoring Sequencing Support Compensation External Compensation Network Support for Loop Stability Optimization Efficiency Features Synchronous Rectification Support Multi-Phase Interleaving for Reduced Ripple Current Optimized Gate Drive Timing Package Type QFN Surface-Mount Package Mounting Type Surface Mount Technology Temperature Range Industrial Operating Temperature Range Target Applications Server Motherboards High-Performance Embedded Computing Networking Equipment Telecommunications Infrastructure Industrial Processing Systems Graphics and Accelerator Platforms #commonpartslibrary #integratedcircuit #powermanagement #hotswapcontrollers

24 Bit Analog to Digital Converter 1, 2 Input 1 Sigma-Delta 20-WQFN (3x3) The ADS127L21IRUKR is a high-resolution, low-power delta-sigma analog-to-digital converter designed for precision industrial and instrumentation applications requiring excellent AC and DC performance. The device integrates a single-channel, 24-bit ADC architecture optimized for low noise, wide dynamic range, and high accuracy signal acquisition. It supports simultaneous low-latency and high-resolution measurements, making it suitable for data acquisition systems, energy monitoring, medical instrumentation, vibration analysis, and precision sensor interfaces. The converter incorporates flexible digital filtering options, programmable operating modes, and a high-speed serial communication interface for easy integration into embedded processing systems. Engineering Specification Device Type Low-power, high-resolution delta-sigma analog-to-digital converter Resolution 24-bit Input Channels Single differential analog input channel ADC Architecture Delta-sigma modulator with integrated digital filtering Sampling Performance Supports wide programmable output data rates ranging from low-speed precision measurements to high-speed data acquisition Input Type Differential analog input Reference Input External precision reference supported Signal-to-Noise Performance High dynamic range and low-noise conversion performance suitable for precision sensing applications Digital Filters Integrated selectable digital filters with low-latency and wideband operating modes Communication Interface SPI-compatible serial digital interface Power Supply Operation Low-voltage analog and digital supply operation Power Consumption Optimized low-power operating modes for battery-powered and portable systems Clocking Supports external clock source input Calibration Features Integrated offset and gain calibration capability Temperature Range Industrial operating temperature range Package Type WQFN package Mounting Style Surface-mount device Application Areas Industrial automation, process control, precision instrumentation, medical electronics, seismic monitoring, vibration sensing, energy metering, and sensor signal acquisition systems. #commonpartslibrary #integratedcircuit #analog #digital #converter

Connector Header Surface Mount 10 position 0.050" (1.27mm) It is a 2-row, 10-position (2×5) male pin header with a 1.27 mm (0.050″) pitch, commonly used in high-density PCB designs. The connector features a surface-mount (SMT) configuration and an unshrouded design, making it suitable for applications where space is limited and flexible mating is required. Pitch: 1.27 mm (fine pitch for compact layouts) Positions: 10 contacts (dual row) Mounting Type: Surface-mount (SMT) Contact Type: Male pins (square post) Contact Material: Phosphor bronze with gold plating (good conductivity & corrosion resistance) Current Rating: ~3.4 A per contact Operating Temperature: −55 °C to +125 °C Insulator Material: LCP (high-temperature, SMT-compatible plastic) Mating Pin Length: ~3.05 mm Unshrouded header → easier alignment flexibility but no polarization protection Dual-row layout → increases connection density Cuttable strip → can be customized to shorter lengths Gold-plated contacts → improves durability for repeated mating cycles Board-to-board interconnections Embedded systems and compact electronics Industrial control and automation Telecommunications and consumer devices #CommonPartsLibrary #Connector #FTSH

The TMS320F280049CPZQR is a 32-bit real-time microcontroller from Texas Instruments' C2000 Piccolo family, purpose-built for high-performance digital power control, motor control, and other real-time embedded control applications. The device is centered around TI's C28x digital signal processing core, a fixed- and floating-point architecture specifically optimized for the kind of fast, deterministic mathematical computation required in closed-loop control systems such as motor drives, digital power supplies, solar inverters, and electric vehicle subsystems. This particular part number represents the "C" variant within the TMS320F28004x family, which grants access to an integrated Configurable Logic Block, a flexible programmable logic resource that allows engineers to implement custom digital logic functions directly on-chip, such as specialized PWM waveform shaping, custom protocol interfaces, or glue logic that would otherwise require an external FPGA or discrete logic devices. This variant also provides access to a secure ROM library containing TI's InstaSPIN-FOC technology, a field-oriented motor control solution that significantly simplifies the development of sensorless motor control algorithms by handling much of the underlying control theory and tuning complexity in pre-validated, secure firmware. Beyond its core processing capabilities, the device integrates an extensive set of control-oriented peripherals that are characteristic of the C2000 platform, including high-resolution pulse-width modulation outputs, enhanced capture modules, and a multi-channel sigma-delta filter module that enables isolated current and voltage sensing across an isolation barrier without requiring a separate digital isolator and decoder chip. A dedicated Control Law Accelerator runs in parallel with the main processing core, offloading time-critical control loop calculations so that the main core remains free to handle communication, supervisory logic, and other system-level tasks, which is particularly valuable in systems running multiple simultaneous control loops. Connectivity on the device is supported through a broad set of industry-standard communication interfaces, allowing it to interface with a wide range of external sensors, communication networks, and host systems without requiring additional bridge components. The device also supports TI's Fast Serial Interface, a high-speed, robust communication protocol intended to simplify board-to-board and module-to-module communication in multi-controller systems, an increasingly common need in distributed power and motor control architectures. This part is qualified to automotive electronics reliability standards, making it suitable for deployment in vehicle power electronics, traction inverters, onboard chargers, and other automotive systems where component robustness, extended temperature operation, and rigorous quality screening are required. The device also supports TI's functional safety documentation framework, providing the architectural transparency and failure mode analysis resources needed by system designers building safety-critical control systems around the device. It is housed in a surface-mount package suited to dense power electronics board layouts and is supplied in tape-and-reel packaging for automated assembly. Spec Sheet Identification Part Number: TMS320F280049CPZQR Device Family: C2000 Piccolo, TMS320F28004x Manufacturer: Texas Instruments Variant: "C" type — with Configurable Logic Block and secure ROM/InstaSPIN-FOC access Functional Classification Device Type: 32-bit real-time microcontroller Core Architecture: C28x digital signal processing core Math Acceleration: Floating-Point Unit and Trigonometric Math Unit for control-loop computation Parallel Control Processing: Integrated Control Law Accelerator Programmable Logic: Configurable Logic Block (CLB) for custom digital logic functions Motor Control Library: Secure ROM with InstaSPIN-FOC sensorless field-oriented control Memory Program Memory Type: Embedded flash memory Memory Architecture: Supports field reprogramming for firmware updates and calibration data storage Control & Analog Peripherals PWM Capability: Frequency-independent, high-resolution PWM outputs Capture Module: Enhanced capture (eCAP) peripheral Isolated Sensing: Multi-channel sigma-delta filter module (SDFM) for isolated current/voltage sensing Analog Integration: Integrated high-speed analog-to-digital converters and internal digital-to-analog converters Programmable Gain: Integrated programmable gain amplifiers Communication Interfaces Standard Interfaces: SPI, SCI, I2C, LIN, and CAN connectivity Power Management Bus: Fully compliant PMBus support High-Speed Module Interface: Fast Serial Interface (FSI) for board-to-board and module-to-module communication Target Applications Application Domains: Industrial motor drives, solar inverters, digital power supplies, electric vehicle and transportation systems, sensing and signal processing Environmental & Qualification Automotive Qualification: AEC-Q100 qualified Functional Safety Support: Documentation and architecture support for functional safety-compliant system design Lifecycle Status: Active production Package Package Type: Surface-mount quad flat package style (LQFP) Mounting: Surface mount technology (SMT) Packaging Format Supply Format: Tape-and-reel, per part suffix designation #TMS320F280049 #C2000 #Piccolo #TexasInstruments #DigitalSignalController #RealTimeMCU #MotorControl #DigitalPowerControl #InstaSPINFOC #FieldOrientedControl #ConfigurableLogicBlock #AECQ100 #AutomotiveMCU #PowerElectronics #EmbeddedSystems #LQFP #SurfaceMount #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary

STN1110-IMM General Description The STN1110-IMM is a multiprotocol OBD-II to UART interpreter integrated circuit designed for automotive diagnostic, telematics, and vehicle communication applications. The device translates OBD-II network traffic into a UART serial data stream for communication with external microcontrollers, embedded processors, and host systems. It supports all legislated OBD-II protocols and provides compatibility with ELM327-based software while offering enhanced processing performance, expanded memory resources, advanced message filtering, firmware upgrade capability, and low-power operation. The device is intended for use in automotive diagnostic tools, fleet management systems, vehicle monitoring equipment, data acquisition systems, and embedded automotive communication products. Engineering Specification Part Number: STN1110-IMM Component Type: OBD-II to UART Interpreter Integrated Circuit Device Category: Automotive Communication Interface IC Package Type: QFN Mounting Type: Surface Mount Device (SMD) Interface Type: * UART * OBD-II Supported Protocols: * ISO 15765-4 CAN * ISO 14230-4 KWP2000 * ISO 9141-2 * SAE J1850 PWM * SAE J1850 VPW Key Features: * Multiprotocol OBD-II support * ELM327 command compatibility * Enhanced ST command extensions * High-speed UART communication * Advanced message filtering * Firmware upgrade capability * Large message buffering * Low-power operation * Automotive diagnostic interface functionality Applications: * OBD-II Scan Tools * Vehicle Diagnostics * Automotive Telematics * Fleet Management Systems * Data Logging Equipment * Embedded Automotive Controllers * Emissions Monitoring Systems * Vehicle Communication Gateways Tags #commonpartslibrary #integratedcircuit #ic #automotive #automotiveelectronics #automotivediagnostics #obdii #obd #uart #vehiclecommunication #telematics #embeddedsystems #communicationinterface #diagnosticinterface #scantool #canbus #kwp2000 #saej1850 #iso9141 #surfaceMount #smd #qfn #electroniccomponent #semiconductor #vehicleelectronics #microcontrollerinterface #datalogging #fleetmanagement #embeddedhardware #hardwaredesign

4A Gate Driver RF Coupling 2500Vrms 1 Channel 8-SOIC Confirmed — this is a Skyworks (formerly Silicon Labs) Si827x-family isolated gate driver, single-channel, with deglitch and UVLO, in the "GBD" variant (3V UVLO threshold). Here's the spec. Engineering Specification — Si8271GBD-IS Manufacturer: Skyworks Solutions, Inc. (formerly Silicon Labs) Device Family: Si827x ISOdriver General Description The Si8271GBD-IS is a single-channel isolated gate driver integrated circuit manufactured by Skyworks Solutions, designed to drive power switching devices such as MOSFETs, IGBTs, and wide-bandgap SiC or GaN FETs in power conversion applications. The device uses Skyworks' proprietary silicon-based galvanic isolation technology rather than the optical isolation used in traditional optocoupler-based gate drivers, providing a more robust, longer-lasting, and more precisely matched isolation barrier between the low-voltage control circuitry and the high-voltage power switching stage. This isolation approach delivers several advantages over legacy optocoupler solutions, including significantly higher common-mode transient immunity, which allows the device to maintain reliable signal integrity even when subjected to the very fast voltage transients generated by high-speed switching in modern power converters. The device's high noise immunity prevents these switching-induced transients from corrupting the gate drive signal, eliminating a common failure mode in less robust isolated driver designs where fast edge rates can cause spurious switching or loss of control. The silicon isolation technology also provides tighter timing specifications, reduced timing variation across temperature and device lifetime, and better part-to-part matching than optocoupler-based alternatives, all of which contribute to more predictable and efficient power stage operation. The device includes an integrated de-glitch filtering circuit on its input, which screens out short noise spikes or unwanted transitions on the control input before they can be passed through to the gate drive output, improving overall system robustness in electrically noisy environments. Undervoltage lockout protection is built into the device, automatically disabling the gate drive output if the supply voltage falls below a safe operating threshold, protecting the driven power switch from being driven with insufficient gate voltage, which could otherwise lead to excessive conduction losses or device damage. The device also provides a dead-time programming feature, allowing designers to precisely tune the timing margin between switching transitions in half-bridge or similar topologies, helping to prevent shoot-through conditions while minimizing unnecessary dead time that would otherwise reduce converter efficiency. The Si8271GBD-IS operates from a wide input supply voltage range and supports drive voltages suitable for a broad range of gate drive requirements, making it adaptable to many different power switch types and converter topologies. It is built to operate reliably across a wide ambient temperature range, supporting use in demanding industrial, telecom, and renewable energy power conversion environments. The device is housed in a compact surface-mount package suited to dense power converter board layouts, and its construction reflects the long-life, high-reliability design philosophy that distinguishes silicon-isolation-based gate drivers from optocoupler-based alternatives. Spec Sheet Identification Part Number: Si8271GBD-IS Device Family: Si827x ISOdriver series Manufacturer: Skyworks Solutions (formerly Silicon Labs) Functional Classification Device Type: Single-channel isolated gate driver Isolation Technology: Proprietary silicon-based galvanic isolation Driven Device Types: MOSFETs, IGBTs, SiC FETs, GaN FETs Output Configuration: Separate pull-up/pull-down driver outputs Isolation & Noise Performance Isolation Withstand Voltage: High-voltage reinforced isolation rating per UL1577 and VDE0884 standards Common-Mode Transient Immunity (CMTI): High-performance CMTI rating for fast-switching robustness Input Filtering: Integrated de-glitch circuit for noise rejection Protection & Control Features Undervoltage Lockout (UVLO): Integrated UVLO fault protection with driver shutdown Dead-Time Control: Precision dead-time programmability via dedicated control pin Input Logic: TTL-level compatible input with wide noise-margin hysteresis Electrical Characteristics Input Supply Voltage Range: Wide-range low-voltage logic supply Drive Supply Voltage: Higher-voltage gate drive supply rail support Propagation Delay: Fast, tightly specified propagation timing Environmental & Qualification Operating Temperature Range: Extended industrial temperature range RoHS Compliance: Yes Lifecycle Status: Active production Package Package Type: Narrow-body small-outline surface-mount package (SOIC-8) Mounting: Surface mount technology (SMT) Packaging Format Supply Format: Tube or tape-and-reel packaging options #Si8271 #Si827x #Skyworks #SiliconLabs #IsolatedGateDriver #ISOdriver #GateDriverIC #MOSFETDriver #IGBTDriver #SiCFET #GaNDriver #PowerElectronics #GalvanicIsolation #CMTI #SOIC #SurfaceMount #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant

Connector Header Surface Mount, Right Angle 3 position 0.047" (1.20mm) The BM03B-ACHSS-GAN-TF(LF)(SN) is a compact surface-mount (SMD) right-angle header connector from JST’s ACH series. It is designed for wire-to-board connections in space-constrained electronic devices. This component features a 3-position (3-pin) male header with a 1.2 mm pitch, making it suitable for high-density PCB layouts where small size and reliable connectivity are required. It is commonly used in consumer electronics, embedded systems, and industrial devices where compact interconnections are needed. Key Features Connector Type: Rectangular header (male pins) Mounting Type: Surface-mount (SMD), right-angle orientation Number of Positions: 3 pins Pitch: 1.2 mm (fine pitch for compact designs) Current Rating: Up to 2 A Voltage Rating: 50 V Contact Plating: Gold-plated contacts (good conductivity & corrosion resistance) Material: Heat-resistant thermoplastic, UL94V-0 rated Operating Temperature: −25 °C to +85 °C Locking Mechanism: Detent lock for secure mating Design: Shrouded (3-wall) for alignment and protection Packaging: Tape & reel (ideal for automated assembly)

The PICAXE-14M2 is a popular, low-cost microcontroller chip for education and hobbyists, known for its flexible, configurable I/O pins (up to 12 usable), support for parallel tasks, built-in touch sensing, and ringtone generation, all programmed via simple BASIC using free software like the PICAXE Editor. It's a compact 14-pin chip (available in DIP or surface-mount) offering 2048 bytes of memory, 512 bytes RAM, and capabilities for USB/serial data transfer, making it an excellent entry point for microcontroller projects. #microcontroller #PICAXE

36.5 kOhms ±0.1% 0.063W, 1/16W Chip Resistor 0603 (1608 Metric) Anti-Sulfur, Automotive AEC-Q200 Thin Film The RGT1608P-3652-B-T5 is a precision surface-mount thick film chip resistor in a 0603 (1608 metric) package. It is designed for applications requiring tight tolerance and stable temperature performance. The component is suitable for high-accuracy circuits such as instrumentation, signal conditioning, and precision voltage division. Key Features Compact 0603 (1608 metric) SMD package High precision ±0.1% tolerance Low temperature coefficient Stable performance over wide temperature range Compatible with standard reflow soldering RoHS compliant and lead-free Electrical Characteristics Resistance Value: 36.5 kΩ Resistance Tolerance: ±0.1% (B) Temperature Coefficient: ±25 ppm/°C (typical) Rated Power: 0.1 W (1/10 W) Maximum Working Voltage: 75 V Maximum Overload Voltage: 150 V Mechanical Characteristics Package Size: 0603 (1608 Metric) Length: 1.6 mm Width: 0.8 mm Height: ~0.45 mm Environmental Specifications Operating Temperature Range: -55°C to +155°C Moisture Sensitivity Level: MSL 1 Thermal Shock: Meets standard IEC requirements Packaging Information Packaging Type: Tape and Reel (T5) Reel Quantity: Typically 5,000 pieces per reel Applications Precision analog circuits Voltage dividers Signal conditioning Measurement and instrumentation systems Industrial and consumer electronics #CommonPartsLibrary #Resistor

The W25Q02JVSFIM from Winbond Electronics is a 2G-bit (256M x 8) Serial NOR Flash Memory device designed for high-density non-volatile data storage applications. It supports high-speed SPI, Dual/Quad SPI, QPI, and DTR interfaces, providing fast data transfer and efficient memory access for embedded systems. The device operates from a 2.7V to 3.6V supply voltage and is available in a 16-pin SOIC surface-mount package. It is suitable for applications such as firmware storage, boot code memory, industrial controllers, IoT devices, automotive electronics, and embedded systems requiring large-capacity reliable flash memory. Key Features Memory Density: 2G-bit Serial NOR Flash (256M x 8) Flash Technology: Single-Level Cell (SLC) NOR Flash Interface Support: Standard SPI, Dual SPI, Quad SPI, QPI, and DTR modes High-Speed Clock Frequency: Up to 133 MHz operation Fast Access Time: Approximately 7.5 ns Supply Voltage Range: 2.7V to 3.6V Non-Volatile Data Storage: Retains stored data without power Memory Organization: 256M x 8-bit architecture Package Type: 16-pin SOIC (7.50 mm width) surface-mount package Operating Temperature Range: -40°C to +85°C Page Program Time: Approximately 3.5 ms Applications: Embedded firmware storage, BIOS/boot memory, industrial equipment, IoT devices, and consumer electronics Hashtags #W25Q02JVSFIM #Winbond #SerialFlashMemory #NORFlash #SPIFlash #QuadSPI #QPI #DTR #EmbeddedSystems #NonVolatileMemory #FlashMemory #FirmwareStorage #IoT #IndustrialElectronics #Semiconductor #MemoryIC

40 Position FFC, FPC Connector Receptacle 0.071" (1.80mm) Surface Mount, Right Angle The KF1R-BBAH1-EA940 is a FlexFast™ board-to-board receptacle connector designed for high-density PCB interconnection applications. It provides a reliable electrical and mechanical interface between printed circuit boards in compact electronic systems. The connector features a right-angle surface-mount configuration, dual-row contact arrangement, and gold-plated copper-alloy contacts to ensure excellent signal integrity, low contact resistance, and long-term durability. Its thermoplastic housing offers mechanical strength and high-temperature resistance, making it suitable for communication, industrial, consumer, and embedded electronic equipment. Manufacturer Amphenol Communications Solutions Part Number KF1R-BBAH1-EA940 Product Series FlexFast™ Connector Type Board-to-Board Receptacle Connector Number of Positions 40 Contacts Contact Arrangement Dual Row Mounting Style Surface Mount Technology (SMT) Orientation Right Angle Contact Pitch 1.8 mm Termination Type Solder Termination Contact Material Copper Alloy Contact Plating Gold Housing Material Thermoplastic Housing Color Black Current Rating 1 A per Contact Operating Temperature Range -40°C to +125°C Flammability Rating UL94 V-0 Mating Durability 100 Mating Cycles Compliance High-density board-to-board interconnection solution Compact right-angle SMT design Dual-row contact configuration Gold-plated contacts for enhanced reliability Low contact resistance and stable electrical performance Durable thermoplastic housing Wide operating temperature range Integrated alignment features for reliable mating Suitable for signal and power transmission Designed for industrial, communication, and embedded electronic applications #Connector #BoardToBoard #FlexFast #Amphenol #SMT #RightAngle #Receptacle #PCB #ElectronicComponents #Interconnect #KF1R_BBAH1_EA940

Green 570nm LED Indication - Discrete 2.1V 0603 (1608 Metric) Green LED Chip LED, 1.6 × 0.8 mm SMD Package – APTD1608CGCK is a surface-mount green LED with a water-clear lens, designed for indicator applications. It features a 568 nm dominant wavelength, 20 mA forward current, 2.5 V typical forward voltage, and is housed in a 1608 (0603) package. #LED #GreenLED #SMDLED #IndicatorLED #Kingbright #APTD1608CGCK #commonpartslibrary #optoelectronic #led #green

DIODE SCHOTTKY 60V SMB The TSS56LB is a 5 A surface-mount Schottky Barrier Rectifier designed for high-efficiency power rectification in switching power supplies, DC-DC converters, freewheeling circuits, and reverse polarity protection. It features a 60 V reverse voltage rating, low forward voltage drop, and fast switching characteristics, making it ideal for reducing power loss and improving overall system efficiency. The device is supplied in a compact DO-214AA (SMB) surface-mount package for automated PCB assembly. Key Features 60 V maximum repetitive reverse voltage (VRRM) 5 A average forward rectified current Low forward voltage drop (typically 0.52 V @ 5 A) High surge current capability (125 A peak) Low reverse leakage current Fast switching Schottky technology Surface-mount DO-214AA (SMB) package RoHS-compliant and lead-free construction Suitable for switching power supplies, DC-DC converters, polarity protection, and freewheeling applications #TSS56LB #SchottkyRectifier #SchottkyDiode #Rectifier #PowerElectronics #SMBPackage #SurfaceMount #LowForwardVoltage #HighEfficiency #PowerSupply #DCDCConverter #ReversePolarityProtection #ElectronicsComponents #commonpartslibrary #diode #schottky #Rectifier #Single-Diode #MBRS130

USB Type-C Receptacle Connector – 16-pin USB Type-C female receptacle for USB 2.0 data, 5 V power delivery, charging, and embedded device interfaces. Features a surface-mount, right-angle PCB design with 16 contacts, 3 A continuous current rating, 5 V operating voltage, and reversible plug orientation compliant with the USB Type-C mechanical interface. Designed for USB 2.0 applications, where duplicated USB-C pins are internally connected or omitted to simplify PCB routing while maintaining plug reversibility. Rated for 5,000–10,000 mating cycles, operates over a −25°C to +85°C temperature range, and is RoHS compliant. #Shouhan #TYPEC16PIN2MD073 #USBTypeC #USBCConnector #USB2Connector #TypeCReceptacle #16Pin #RightAngle #SurfaceMount #PCBConnector #PowerConnector #EmbeddedSystems

NAVIGATION, 50mA, 12VDC SPST-NO, 4 Way Directional, Center Select Surface MountJS1400 Series is a 5-position SMT navigation switch (joystick switch) from E-Switch designed for user interface navigation and directional control applications. The switch provides five normally-open positions including up, down, left, right, and center push selection. It features a compact surface-mount design, 360° directional actuation, long mechanical life of up to 100,000 cycles, and low operating force for intuitive user interaction. With a 12VDC, 50mA rating and compact footprint, the JS1400 is ideal for handheld devices, navigation controls, telecommunications equipment, consumer electronics, industrial interfaces, medical devices, and embedded control systems requiring menu navigation and cursor control. Search Keywords: JS1400, E-Switch JS1400, navigation switch, joystick switch, 5-position switch, 5-way switch, SMT joystick, navigation controller switch, directional switch, center push switch, tactile joystick switch, user interface switch, handheld device switch, menu navigation switch, cursor control switch, embedded control switch, telecom navigation switch, industrial control switch, surface mount joystick, PCB joystick switch Hashtags: #JS1400 #ESwitch #NavigationSwitch #JoystickSwitch #5WaySwitch #DirectionalSwitch #SMTSwitch #TactileSwitch #UserInterface #HMI #EmbeddedSystems #IndustrialElectronics #ConsumerElectronics #Telecommunications #HandheldDevices #PCBDesign #ElectronicComponents #Switch #ControlInterface #NavigationControl

Tactile Switch for momentary user input, featuring a 6.0 × 6.0 mm SMD package, 5.0 mm actuator height, and DC 12 V, 50 mA contact rating. Designed for surface-mount PCB applications requiring a compact normally-open pushbutton switch. #TactileSwitch #PushbuttonSwitch #MomentarySwitch #SMDSwitch #6x6mm #12V #50mA #YoungseongPrecision #ITS1105 #InputSwitch

Connector Header Surface Mount, Right Angle 6 position 0.079" (2.00mm) Wire-to-board PCB header for mating with compatible Micro-Lock Plus connectors, featuring a 2.00 mm pitch, single-row, right-angle surface-mount configuration with 6 circuits. It supports a maximum voltage of 250 V, a maximum current of 3.0 A per contact, and an operating temperature range of -40°C to +105°C, with a positive-lock mating design and gold-plated contacts. #Connector #PCBConnector #WireToBoard #MicroLockPlus #Molex #SurfaceMount #RightAngle #6Pin

Surface Mount Fuses 32V 0603 3A V/FA HALIDE FREE Littelfuse 467 Series fast-acting surface-mount fuse, 0603 thin-film package, designed for secondary circuit protection in space-constrained applications, available from 0.25A to 5A current rating, fast opening characteristic, lead-free, halogen-free and RoHS compliant, UL/CSA/NMX approved, suitable for cell phones, battery packs, digital cameras, DVD players and portable electronics. Search Keywords: Littelfuse 467 Series, 467 Series fuse, Littelfuse 0603 fuse, 0603 fast acting fuse, 0603 SMD fuse, surface mount fuse 0603, thin film fuse 0603, fast acting SMD fuse, Littelfuse 467 fast acting fuse, 0.25A to 5A SMD fuse, RoHS 0603 fuse, halogen free SMD fuse, UL approved SMD fuse, secondary circuit protection fuse Hashtags: #Littelfuse467 #467SeriesFuse #LittelfuseFuse #0603Fuse #SMD0603Fuse #FastActingFuse #SurfaceMountFuse #SMDFuse #ThinFilmFuse #CircuitProtectionFuse #SecondaryProtectionFuse #RoHSFuse #HalogenFreeFuse #ULApprovedFuse #BatteryPackFuse #PortableElectronicsFuse

Shielded Power Inductor – 15 µH molded shielded wirewound power inductor with ±20% inductance tolerance, 6.0 A RMS current rating, and 5.8 A saturation current for power conversion and filtering applications. Features 43.8 mΩ maximum DC resistance, 11 MHz typical self-resonant frequency, composite core construction, and is rated for 0 V to 60 V operating voltage. Designed for surface-mount assembly in the XAL6060 package. #Coilcraft #XAL6060153MEB #XAL6060 #PowerInductor #ShieldedInductor #WirewoundInductor #15uH #CompositeCore #SMTInductor #PowerSupply #DCDCConverter #PassiveComponents #EmbeddedSystems

WR-FPC SMT ZIF Horizontal Hinge FFC/FPC Connector, 22 positions, 0.50 mm pitch, bottom-contact type with flip-lock (ZIF) actuator. Surface-mount connector designed for flexible flat cable (FFC) and flexible printed circuit (FPC) connections in compact electronic devices. Horizontal cable entry, low-profile design, halogen-free and RoHS compliant. Suitable for displays, touch panels, cameras, embedded systems, consumer electronics, industrial devices, and PCB interconnect applications. Search Keywords: WR-FPC, WR-FPC SMT ZIF, 687122149022, FFC Connector, FPC Connector, 22 Pin FFC Connector, 22 Pin FPC Connector, 0.5mm Pitch Connector, Bottom Contact Connector, ZIF Connector, Flip Lock Connector, Horizontal FFC Connector, SMT FFC Connector, Würth Elektronik Connector, Flexible Flat Cable Connector, LCD Connector, Display Connector, Camera Connector Hashtags: #WRFPC #687122149022 #WurthElektronik #FFCConnector #FPCConnector #ZIFConnector #FlipLockConnector #SMTConnector #BottomContact #22PinConnector #05mmPitch #FlexibleFlatCable #FlexiblePrintedCircuit #DisplayConnector #EmbeddedHardware #PCBDesign #ElectronicsDesign #HardwareEngineering #IndustrialElectronics #ConsumerElectronicsWR-FPC 0.50mm SMT Horiz. Bot. Contact Hinge type WR-FPC 0.50mm 22pins Hinge type SMT Horizontal Bottom Contact

Digital MEMS Barometric Pressure Sensor – Ultra-compact absolute MEMS barometric pressure sensor with an integrated temperature sensor and 24-bit digital output for altimeters, weather stations, GPS, drones, wearables, industrial monitoring, and IoT applications. Operates from a 1.7 V to 3.6 V supply, measures 260 hPa to 1260 hPa (26 kPa to 126 kPa) absolute pressure with ±0.5 hPa absolute accuracy, and communicates via I²C, SPI, or MIPI I3C℠ interfaces. Features low power consumption (4 µA typical at 1 Hz), embedded temperature compensation, 24-bit pressure output, integrated FIFO, programmable output data rates from 1 Hz to 200 Hz, interrupt generation, and 22,000 g shock survivability. Specified for operation over a −40°C to +85°C temperature range and housed in a 10-pin HLGA (2.0 × 2.0 × 0.73 mm) surface-mount package. #STMicroelectronics #LPS22HHTR #MEMSSensor #PressureSensor #Barometer #DigitalPressureSensor #TemperatureSensor #I2C #SPI #I3C #WeatherStation #Altimeter #EmbeddedSystems

1000 pF ±5% 1000V (1kV) Ceramic Capacitor C0G, NP0 2220 (5750 Metric) KEMET high-voltage C0G MLCC surface-mount ceramic capacitor, temperature-compensating Class I dielectric, capacitance range from 1pF to 0.15µF, voltage ratings from 500V to 10kV, extremely low ESR and ESL, high ripple current capability, negligible capacitance shift with temperature and voltage, no piezoelectric noise, -55°C to +125°C operating temperature, RoHS/REACH compliant, suitable for resonant circuits, high-frequency power converters, snubbers, SiC/GaN wide-bandgap systems, timing and filtering applications. Search Keywords: KEMET high voltage C0G MLCC, KEMET C0G capacitor, high voltage MLCC, C0G ceramic capacitor, Class I MLCC, temperature compensating capacitor, low ESR MLCC, high frequency MLCC, snubber capacitor, resonant capacitor, SiC GaN capacitor, 500V MLCC, 1kV MLCC, 2kV MLCC, 3kV MLCC, 10kV MLCC Hashtags: #KEMETC0G #HighVoltageMLCC #C0GCapacitor #CeramicCapacitor #MLCC #ClassICapacitor #LowESRCapacitor #SnubberCapacitor #ResonantCapacitor #HighFrequencyCapacitor #SiCCapacitor #GaNCapacitor #500VCapacitor #1kVCapacitor #10kVCapacitor

CMOS Crystal Oscillator (XO) – 8.192 MHz CMOS clock oscillator with enable/disable function for precision clock generation. Operates from a 1.6 V to 3.6 V supply, features ±25 ppm frequency stability, 1.8 mA maximum supply current, 45/55% duty cycle, 7 ns maximum rise/fall time, and 5 ms maximum startup time. Specified for operation over a −40°C to +85°C temperature range and housed in a 4-pad 2.5 × 2.0 mm surface-mount package with a 0.9 mm maximum height. #ECSInc #ECS2520MVLC08192CNTR #CrystalOscillator #CMOSOscillator #XO #8192MHz #ClockGenerator #FrequencyReference #SurfaceMount #2520Package #EmbeddedSystems

Bluetooth, WiFi 802.11a/b/g/n/ac, Bluetooth v5.2 Transceiver Module 2.412GHz ~ 2.472GHz, 5.18GHz ~ 5.825GHz Surface Mount Wi-Fi + Bluetooth® module for wireless connectivity, supporting IEEE 802.11a/b/g/n/ac dual-band operation at 2.4 GHz and 5 GHz along with Bluetooth® 5.2 BR/EDR/LE functionality. The LBEE5PK2AE-564 integrates the Infineon CYW4373E chipset, supports SDIO 3.0 and USB 2.0 (shared) interfaces for WLAN, HCI UART/USB 2.0 (shared) and PCM for Bluetooth, operates over a -40°C to +85°C temperature range, and is housed in an 8.0 × 7.8 × 1.15 mm surface-mount module. Up to 433 Mbps data rates are supported using 802.11ac SISO operation with 20 MHz, 40 MHz, and 80 MHz channels. #WiFiModule #BluetoothModule #WirelessConnectivity #IEEE80211ac #Bluetooth52 #DualBand #2_4GHz #5GHz #SDIO #USB #UART #PCM #Murata #CYW4373E #SMDModule