Part Datasheet Audit


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, locate the official manufacturer documentation if needed, update the Datasheet property, then verify the symbol, footprint, and terminal descriptions against it.
Audit complete for Molex 505578-0621. The existing Datasheet URL is already an official Molex link, so no update was needed; the 6 signal pads plus 2 retention pads match the official 2.00 mm-pitch land pattern and the part is safe to use.
  • Key specs: right-angle SMT male header, 6 circuits, 1 row, 3.4 A/contact, 250 V AC/DC, −40 to +105 °C, 0.38 µm gold plating.
  • Moderate metadata issues: pin types are Unspecified; pin descriptions/groups/sections/orders are missing; package/case and structured connector properties are not populated.
  • Minor issue: description says “0.38m” instead of 0.38 µm.
  • No critical footprint or pin-numbering mismatches found.
Fix metadata and review
Fix pin metadata
Correct connector properties
Correct description typo
Run final review

MP2
Pin Number
MP2
MP1
Pin Number
MP1
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
Left
2
2
Unspecified
Left
3
3
Unspecified
Left
4
4
Unspecified
Left
5
5
Unspecified
Left
6
6
Unspecified
Left
MP1
MP1
Unspecified
Bottom
MP2
MP2
Unspecified
Bottom

5055780621