Power Management IC for iMX8M 5V 6A 6 Buck + 5 LDO The PCA9450CHNY is a highly integrated Power Management Integrated Circuit (PMIC) from NXP Semiconductors, specifically designed to power the i.MX 8M family of application processors, particularly the i.MX 8M Plus. It integrates multiple high-efficiency DC-DC buck converters, LDO regulators, power sequencing logic, load switching, voltage monitoring, and system control functions into a single device. The PCA9450C variant features a configurable dual-phase 6 A buck regulator for powering high-current processor cores while supporting Dynamic Voltage Scaling (DVS) for optimized power efficiency. Key Features Six high-efficiency switching regulators (Buck converters) PCA9450C variant supports a configurable 6 A dual-phase buck regulator Three 3 A buck regulators with Dynamic Voltage Scaling (DVS) Remote-sense capability on major buck outputs for IR-drop compensation Five integrated LDO regulators Supports DDR4, LPDDR4, and DDR3L memory configurations 400 mA load switch with active discharge Dual-channel logic level translator Integrated 32.768 kHz crystal oscillator driver Fast-mode Plus (Fm+) 1 MHz I²C interface Programmable power sequencing and voltage control Power ON/OFF and Standby/Run mode control inputs Protection features including UVLO, thermal shutdown, fault monitoring, and soft-start Operating temperature range: −40°C to +105°C 56-pin HVQFN package (7 mm × 7 mm, 0.4 mm pitch) Optimized for i.MX 8M Mini, Nano, and Plus processors, especially the i.MX 8M Plus for the PCA9450C variant. #CommonPartsLibrary #PCA9450CHNY #PCA9450C #NXP #PMIC #PowerManagementIC #PowerSupply #VoltageRegulator #BuckConverter #LDO #DynamicVoltageScaling #DVS #IMX8M #IMX8MPlus #EmbeddedSystems #IndustrialElectronics #PowerManagement #HVQFN56 #Semiconductor #IntegratedCircuit #IC #CommonPartsLibrary #ElectronicsDesign #HardwareDesign #PCBDesign #EmbeddedLinux #IoT #ProcessorPowerManagement #PowerSequencing #SystemPower #NXPSemiconductors

BGA-565(15.5x14.4) Microcontrollers, Quad-core ARM Cortex-A55 processor The RK3566 is a high-performance, low-power 64-bit application processor developed by Rockchip for AIoT, industrial control, smart displays, tablets, embedded systems, and single-board computers. It integrates a quad-core ARM Cortex-A55 CPU, Mali-G52 GPU, AI acceleration engine (NPU), advanced multimedia processing, and a rich set of connectivity interfaces, making it suitable for Linux- and Android-based applications requiring efficient performance and multimedia capabilities. Key Features Quad-core 64-bit ARM Cortex-A55 processor operating up to 2.0 GHz. ARM Mali-G52 2EE GPU with support for OpenGL ES 3.2, OpenCL 2.0, and Vulkan 1.1. Integrated NPU delivering up to 1 TOPS AI computing performance. Supports DDR3, DDR3L, DDR4, LPDDR3, LPDDR4, and LPDDR4X memory. Hardware video decoding up to 4K@60fps for H.264, H.265, and VP9 formats. Hardware video encoding up to 1080p@60fps for H.264 and H.265. Built-in 8MP ISP with HDR image processing support. Multiple display interfaces including HDMI 2.0, eDP, MIPI-DSI, LVDS, RGB, and E-Ink. High-speed connectivity with USB 3.0, USB 2.0, PCIe, SATA, Gigabit Ethernet, SDIO, and eMMC 5.1. Rich peripheral support including UART, SPI, I²C, PWM, ADC, I²S, PDM, and GPIO. Optimized for Android, Linux, industrial HMI, smart home, edge computing, and AIoT applications. Manufactured using a 22 nm process for improved power efficiency. #RK3566 #Rockchip #ARMCortexA55 #MaliG52 #AIoT #EmbeddedSystems #SingleBoardComputer #Linux #Android #IndustrialControl #SmartDisplay #EdgeComputing #SoC #Processor #NPU #4KVideo #IoT #Electronics #HardwareDesign #PCBDesign

ARM® Cortex®-M33 STM32H5 Microcontroller IC 32-Bit 250MHz 2MB (2M x 8) FLASH 144-LQFP (20x20) # STM32H573ZIT6 ## General Description The STM32H573ZIT6 is a high-performance microcontroller from STMicroelectronics based on the Arm Cortex-M33 core. It is designed to deliver advanced processing capability, enhanced security, and extensive peripheral integration for industrial, medical, consumer, communications, and embedded control applications. The device combines powerful computational performance with low-power operation, making it suitable for real-time control, edge computing, human-machine interfaces, industrial automation, IoT gateways, motor control systems, and secure connected devices. Integrated security features, high-speed memory architecture, and comprehensive communication interfaces enable the development of robust and scalable embedded solutions. ## Key Features ### Processing Architecture * Arm Cortex-M33 processor core * TrustZone security architecture * Digital signal processing capabilities * Floating-point computation support * Optimized real-time processing performance ### Memory Resources * Embedded Flash memory * Integrated SRAM architecture * Error correction capability for enhanced reliability * High-speed memory access structure ### Security Features * Secure boot functionality * Hardware cryptographic accelerators * Secure firmware update support * Memory protection mechanisms * Tamper detection capabilities * Trusted execution environment * Secure key management support ### Communication Interfaces * USART and UART communication interfaces * SPI serial communication interfaces * I²C communication interfaces * CAN FD connectivity * USB connectivity support * Ethernet interface capability * SDMMC memory card interface * Flexible external communication options ### Analog Features * High-performance analog-to-digital conversion * Digital-to-analog conversion capability * Analog comparators * Precision signal acquisition support ### Timer and Control Functions * Advanced control timers * General-purpose timers * PWM generation capability * Encoder interface support * Motor-control functionality * Real-time clock integration ### Power Characteristics * Low-power operating modes * Dynamic power optimization * Battery-powered application support * Efficient performance-to-power ratio ### Package Characteristics * LQFP package construction * Surface-mount technology compatibility * Industrial-grade mechanical design * Suitable for automated assembly processes ### Application Areas * Industrial Automation Systems * Motor Control Equipment * Human-Machine Interfaces * Smart Energy Systems * Medical Electronics * IoT Gateways * Secure Embedded Devices * Industrial Networking Equipment * Building Automation Systems * Consumer Electronics * Data Acquisition Systems * Edge Computing Applications ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial and Commercial Application Support ## Manufacturer STMicroelectronics ## Product Family STM32H5 Series High-Performance Microcontrollers #STM32H573ZIT6 #STM32H5 #STMicroelectronics #CortexM33 #Microcontroller #EmbeddedSystems #IndustrialAutomation #SecureMCU #IoT #EdgeComputing #MotorControl #EmbeddedDesign #ElectronicsEngineering #FirmwareDevelopment #IndustrialElectronics

ESP32-C3-MINI-1 ESP32-C 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® 5.x (BLE) Transceiver 2.4GHz Evaluation Board ESP32-C3-DevKitM-1 is a compact entry-level development board from Espressif Systems based on the ESP32-C3-MINI-1 module. It integrates a 32-bit RISC-V single-core microcontroller, 2.4 GHz Wi-Fi, and Bluetooth Low Energy (BLE) connectivity, making it suitable for IoT devices, embedded applications, smart sensors, and wireless control projects. The board exposes most GPIO pins through headers for easy prototyping and supports programming through USB. Key Features: 32-bit RISC-V Single-Core Processor Based on ESP32-C3 SoC architecture Clock frequency up to 160 MHz Wireless Connectivity Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 Low Energy (BLE) support Memory 4 MB embedded Flash memory inside the ESP32-C3-MINI-1 module GPIO and Peripheral Interfaces Multiple programmable GPIO pins Supports interfaces such as: SPI UART I²C I²S PWM ADC USB Serial/JTAG Development Board Features Built-in ESP32-C3-MINI-1 module with PCB antenna USB interface for programming and power 5 V to 3.3 V onboard voltage regulator Breadboard-friendly pin headers Applications IoT gateways Smart home devices Wireless sensors Industrial automation Wearable electronics Embedded control systems #ESP32C3 #ESP32 #DevKitM1 #Espressif #RISCVD #WiFiMCU #BluetoothLE #IoT #EmbeddedSystems #Microcontroller #WirelessModule #SmartDevices #ElectronicsDesign #Prototyping

Open Frame AC DC Converters 1 Output 5V 1A 85 ~ 305 VAC, 70 ~ 430 VDC Input PBO-5F-5 is a compact 5W open-frame AC-DC power supply module from Bel Power Solutions designed for PCB-mounted industrial and embedded power applications. It accepts a universal input voltage of 85–305VAC or 70–430VDC and delivers a regulated 5VDC output at up to 1A. Its high reliability, compact SIP package, and comprehensive protection features make it suitable for IoT devices, industrial controls, instrumentation, home automation, and other space-constrained electronic systems. Key Features: Universal 85–305VAC / 70–430VDC input voltage range Fixed 5VDC output, 1A maximum output current 5W continuous output power High efficiency of up to 76% Compact 6-SIP open-frame through-hole package Wide operating temperature range: -40°C to +85°C (with derating) Built-in short-circuit and overcurrent protection Ultra-low no-load power consumption (<0.1W) Certified to IEC/EN/UL 62368-1 High reliability with MTBF >2.7 million hours #ACDCPowerSupply #PowerModule #OpenFramePowerSupply #UniversalInput #5VPowerSupply #PCBMount #IndustrialElectronics #EmbeddedSystems #BelPower #PowerElectronics

30 Position Connector Receptacle 0.016" (0.40mm) Surface Mount, Right Angle USL00-30L-A is a 30-position, 0.4 mm pitch right-angle receptacle connector from the KEL USL Series, designed for high-density connections using micro coaxial cables in compact electronic equipment. Its ultra-low profile design, reliable IDC termination, and multiple ground contacts make it suitable for high-speed signal transmission applications such as LCD panels, cameras, industrial electronics, and embedded systems. Key Features 30-position receptacle connector 0.4 mm contact pitch for high-density designs Right-angle surface-mount PCB mounting Ultra-low profile height of approximately 1.0 mm Designed for #42 AWG micro coaxial cables IDC (Insulation Displacement Contact) termination for reliable cable connection Multiple ground terminals for improved EMI/EMS performance Metal shell construction for enhanced shielding and mechanical strength Gold-plated contacts for reliable electrical performance Rated current: 0.25 A per contact Voltage rating: 200 VAC Operating temperature range: −40°C to +85°C Latch-lock mechanism for secure mating connection RoHS compliant and suitable for compact high-speed signal applications #KEL #USL0030LA #MicroCoaxConnector #BoardToCableConnector #FFCConnector #HighDensityConnector #SMTConnector #RightAngleConnector #EmbeddedSystems #IndustrialElectronics #SignalIntegrity #ElectronicComponents #PCBDesign #MicroCoax #InterconnectSolutions

16-bit, 500-kSPS, eight-channel, single-supply SAR ADC with ±12-V differential inputs The ADS8684W and ADS8688W are 4-channel and 8-channel, integrated data acquisition systems based on a 16-bit successive approximation (SAR) analogto-digital converter (ADC), operating at a throughput of 500kSPS. The devices feature integrated analog front-end circuitry for each input channel with overvoltage protection up to ±20V, a 4-channel or 8-channel multiplexer with automatic and manual scanning modes, and an on-chip, 4.096V reference with low temperature drift. Operating on a single 5V analog supply, each input channel on the devices can independently support bipolar input ranges of ±12.288V, ±6.144V, and ±3.072V and unipolar input ranges of 12.288V to 0V and 6.144V to 0V. The ADS8684W and ADS8688W offer a simple SPIcompatible serial interface to the digital host and also support daisy-chaining of multiple devices. The digital supply operates from 1.65V to 5.25V, enabling direct interface to a wide range of host controllers Features • 16-Bit ADCs with Integrated Analog Front-End • 4-, 8-Channel MUX with Auto and Manual Scan • Channel-Independent Programmable Inputs: – ±12.288V, ±6.144V, and ±3.072V – 12.288V to 0V and 6.144V to 0V • 5V Analog Supply: 1.65V to 5V I/O Supply • Constant Resistive Input Impedance: 1.2MΩ • Input Overvoltage Protection: Up to ±20V • On-Chip, 4.096V Reference with Low Drift • Excellent Performance: – 500kSPS Aggregate Throughput – DNL: ±0.6LSB; INL: ±0.8LSB – Low Drift for Gain Error and Offset – SNR: 91.5dB; THD: –102dB – Low Power: 65mW • AUX Input → Direct Connection to ADC Inputs • ALARM → High and Low Thresholds per Channel • SPI™-Compatible Interface with Daisy-Chain • Industrial Temperature Range: –40°C to 125°C #commonpartslibrary #ADS8688W #TexasInstruments #ADC #SARADC #DataAcquisition #IndustrialAutomation #SPI #PrecisionADC #AnalogFrontEnd #EmbeddedSystems #MeasurementSystems

Isolated Module DC DC Converter 1 Output 12V 13.4A 9V - 50V Input DCM3623T50T13A6T70 is a high-density, isolated, and regulated DC-DC converter module from Vicor, designed to efficiently convert a wide input voltage range into a stable 12V output. Utilizing Vicor's advanced ChiP™ packaging technology and Zero Voltage Switching (ZVS) topology, it delivers high efficiency, excellent thermal performance, and robust protection features, making it suitable for industrial, transportation, aerospace, and distributed power applications. Key Features Wide input voltage range: 9V to 50V DC Regulated 12V DC output Maximum output power: 160W Continuous output current up to 13.4A High efficiency up to 91.5% 2250V DC isolation between input and output High-frequency Zero Voltage Switching (ZVS) topology Integrated protections: Over-Voltage Protection (OVP) Over-Current Protection (OCP) Under-Voltage Lockout (UVLO) Short-Circuit Protection (SCP) Over-Temperature Protection (OTP) Compact 3623 Through-Hole ChiP® package Operating temperature range: -40°C to +125°C Suitable for industrial, process control, transportation, defense, and aerospace systems. #DCDCConverter #Vicor #PowerModule #IsolatedConverter #PowerElectronics #IndustrialAutomation #EmbeddedSystems #TransportationElectronics #AerospaceElectronics #HighEfficiencyPower #ChiPTechnology #DCM3623

Buck Switching Regulator IC Positive Adjustable (Fixed) 0.8V (3.3V, 5V) 1 Output 4.5A 20-WFQFN Exposed Pad The LM656x5-Q1 are a family of automotive buck converters designed for high efficiency, high-power density, and ultra-low electromagnetic interference (EMI). The converters operate over a wide input voltage range of 3V to 65V (70V transient < 100ms), reducing the need for external input surge protection. The LM656x5-Q1 comes with pin selectable fixed output voltages of 3.3V and 5V or in adjustable configuration. The low EMI operation is enabled with minimized loop inductance and optimized switch node slew rate. A pin-selectable ±5% or ±10% dual-random spread spectrum (DRSS) significantly reduces peak emissions through a combination of triangular and pseudo-random modulation while keeping output voltage ripple very low. The current-mode control architecture with a 30ns typical minimum on-time allows high conversion ratios at high frequencies coupled with a fast transient response and excellent load and line regulation. Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Wide input voltage range: 3V to 65V (70V transient < 100ms) – Meets LV148 / ISO21780 requirements • Designed for low EMI requirements – Facilitates CISPR 25 class 5 compliance – Mode pin configurable ±5% or ±10% dualrandom spread spectrum reducing peak emissions – Enhanced HotRod™ QFN package with symmetrical pinout – Switching frequency from 300kHz to 2.2MHz – Pin-configurable AUTO or FPWM operation – Internal compensation, current limit, and TSD • Low minimum on time: 40ns (maximum) – Enables 36VIN to 3.3VOUT conversion at 2.2MHz • High-efficiency power conversion at all loads – > 94% peak efficiency at 24VIN, 5VOUT, 400kHz – 2.5µA switching input current at no load • High power density – 3.6mm × 2.6mm, wettable flank, 20-pin package – Pin compatible with 36V LM654x0-Q1 – ϴJA = 24.0°C/W (LM65645-Q1EVM) • Create a custom design using the LM656x5-Q1 with the WEBENCH® Power Designer 2 Applications • Advanced driver assistance systems (ADAS) • Automotive infotainment and cluster • Hybrid, electric, and powertrain systems #AutomotiveElectronics #BuckConverter #DCDCConverter #PowerManagement #VoltageRegulator #SynchronousBuck #LowEMI #AECQ100 #TexasInstruments #EmbeddedSystems

Linear Voltage Regulator IC Positive Fixed 1 Output 1A TO-220 These voltage regulators are monolithic integrated circuits designed as fixed−voltage regulators for a wide variety of applications including local, on−card regulation. These regulators employ internal current limiting, thermal shutdown, and safe−area compensation. With adequate heatsinking they can deliver output currents in excess of 1.0 A. Although designed primarily as a fixed voltage regulator, these devices can be used with external components to obtain adjustable voltages and currents. Features • Output Current in Excess of 1.0 A • No External Components Required • Internal Thermal Overload Protection • Internal Short Circuit Current Limiting • Output Transistor Safe−Area Compensation • Output Voltage Offered in 1.5%, 2% and 4% Tolerance • Available in Surface Mount D2PAK−3, DPAK−3 and Standard 3−Lead Transistor Packages • NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable • These are Pb−Free Devices #MC7805CTG #7805 #VoltageRegulator #LinearRegulator #PowerManagement #5VRegulator #Onsemi #TO220 #EmbeddedSystems #ElectronicsDesign #PowerSupply #PCBDesign #HardwareEngineering #IndustrialElectronics #CircuitDesign

The TMS320F280049CPZQR is a 32-bit real-time microcontroller from Texas Instruments' C2000 Piccolo family, purpose-built for high-performance digital power control, motor control, and other real-time embedded control applications. The device is centered around TI's C28x digital signal processing core, a fixed- and floating-point architecture specifically optimized for the kind of fast, deterministic mathematical computation required in closed-loop control systems such as motor drives, digital power supplies, solar inverters, and electric vehicle subsystems. This particular part number represents the "C" variant within the TMS320F28004x family, which grants access to an integrated Configurable Logic Block, a flexible programmable logic resource that allows engineers to implement custom digital logic functions directly on-chip, such as specialized PWM waveform shaping, custom protocol interfaces, or glue logic that would otherwise require an external FPGA or discrete logic devices. This variant also provides access to a secure ROM library containing TI's InstaSPIN-FOC technology, a field-oriented motor control solution that significantly simplifies the development of sensorless motor control algorithms by handling much of the underlying control theory and tuning complexity in pre-validated, secure firmware. Beyond its core processing capabilities, the device integrates an extensive set of control-oriented peripherals that are characteristic of the C2000 platform, including high-resolution pulse-width modulation outputs, enhanced capture modules, and a multi-channel sigma-delta filter module that enables isolated current and voltage sensing across an isolation barrier without requiring a separate digital isolator and decoder chip. A dedicated Control Law Accelerator runs in parallel with the main processing core, offloading time-critical control loop calculations so that the main core remains free to handle communication, supervisory logic, and other system-level tasks, which is particularly valuable in systems running multiple simultaneous control loops. Connectivity on the device is supported through a broad set of industry-standard communication interfaces, allowing it to interface with a wide range of external sensors, communication networks, and host systems without requiring additional bridge components. The device also supports TI's Fast Serial Interface, a high-speed, robust communication protocol intended to simplify board-to-board and module-to-module communication in multi-controller systems, an increasingly common need in distributed power and motor control architectures. This part is qualified to automotive electronics reliability standards, making it suitable for deployment in vehicle power electronics, traction inverters, onboard chargers, and other automotive systems where component robustness, extended temperature operation, and rigorous quality screening are required. The device also supports TI's functional safety documentation framework, providing the architectural transparency and failure mode analysis resources needed by system designers building safety-critical control systems around the device. It is housed in a surface-mount package suited to dense power electronics board layouts and is supplied in tape-and-reel packaging for automated assembly. Spec Sheet Identification Part Number: TMS320F280049CPZQR Device Family: C2000 Piccolo, TMS320F28004x Manufacturer: Texas Instruments Variant: "C" type — with Configurable Logic Block and secure ROM/InstaSPIN-FOC access Functional Classification Device Type: 32-bit real-time microcontroller Core Architecture: C28x digital signal processing core Math Acceleration: Floating-Point Unit and Trigonometric Math Unit for control-loop computation Parallel Control Processing: Integrated Control Law Accelerator Programmable Logic: Configurable Logic Block (CLB) for custom digital logic functions Motor Control Library: Secure ROM with InstaSPIN-FOC sensorless field-oriented control Memory Program Memory Type: Embedded flash memory Memory Architecture: Supports field reprogramming for firmware updates and calibration data storage Control & Analog Peripherals PWM Capability: Frequency-independent, high-resolution PWM outputs Capture Module: Enhanced capture (eCAP) peripheral Isolated Sensing: Multi-channel sigma-delta filter module (SDFM) for isolated current/voltage sensing Analog Integration: Integrated high-speed analog-to-digital converters and internal digital-to-analog converters Programmable Gain: Integrated programmable gain amplifiers Communication Interfaces Standard Interfaces: SPI, SCI, I2C, LIN, and CAN connectivity Power Management Bus: Fully compliant PMBus support High-Speed Module Interface: Fast Serial Interface (FSI) for board-to-board and module-to-module communication Target Applications Application Domains: Industrial motor drives, solar inverters, digital power supplies, electric vehicle and transportation systems, sensing and signal processing Environmental & Qualification Automotive Qualification: AEC-Q100 qualified Functional Safety Support: Documentation and architecture support for functional safety-compliant system design Lifecycle Status: Active production Package Package Type: Surface-mount quad flat package style (LQFP) Mounting: Surface mount technology (SMT) Packaging Format Supply Format: Tape-and-reel, per part suffix designation #TMS320F280049 #C2000 #Piccolo #TexasInstruments #DigitalSignalController #RealTimeMCU #MotorControl #DigitalPowerControl #InstaSPINFOC #FieldOrientedControl #ConfigurableLogicBlock #AECQ100 #AutomotiveMCU #PowerElectronics #EmbeddedSystems #LQFP #SurfaceMount #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary

STN1110-IMM General Description The STN1110-IMM is a multiprotocol OBD-II to UART interpreter integrated circuit designed for automotive diagnostic, telematics, and vehicle communication applications. The device translates OBD-II network traffic into a UART serial data stream for communication with external microcontrollers, embedded processors, and host systems. It supports all legislated OBD-II protocols and provides compatibility with ELM327-based software while offering enhanced processing performance, expanded memory resources, advanced message filtering, firmware upgrade capability, and low-power operation. The device is intended for use in automotive diagnostic tools, fleet management systems, vehicle monitoring equipment, data acquisition systems, and embedded automotive communication products. Engineering Specification Part Number: STN1110-IMM Component Type: OBD-II to UART Interpreter Integrated Circuit Device Category: Automotive Communication Interface IC Package Type: QFN Mounting Type: Surface Mount Device (SMD) Interface Type: * UART * OBD-II Supported Protocols: * ISO 15765-4 CAN * ISO 14230-4 KWP2000 * ISO 9141-2 * SAE J1850 PWM * SAE J1850 VPW Key Features: * Multiprotocol OBD-II support * ELM327 command compatibility * Enhanced ST command extensions * High-speed UART communication * Advanced message filtering * Firmware upgrade capability * Large message buffering * Low-power operation * Automotive diagnostic interface functionality Applications: * OBD-II Scan Tools * Vehicle Diagnostics * Automotive Telematics * Fleet Management Systems * Data Logging Equipment * Embedded Automotive Controllers * Emissions Monitoring Systems * Vehicle Communication Gateways Tags #commonpartslibrary #integratedcircuit #ic #automotive #automotiveelectronics #automotivediagnostics #obdii #obd #uart #vehiclecommunication #telematics #embeddedsystems #communicationinterface #diagnosticinterface #scantool #canbus #kwp2000 #saej1850 #iso9141 #surfaceMount #smd #qfn #electroniccomponent #semiconductor #vehicleelectronics #microcontrollerinterface #datalogging #fleetmanagement #embeddedhardware #hardwaredesign

Connector Header Through Hole 12 position 0.079" (2.00mm) M80-5T11242MC is a high-reliability, 12-position (6+6) double-row male PCB connector from the Harwin Datamate J-Tek series. Designed for harsh-environment and mission-critical applications, it features a 2.00 mm pitch, vertical through-hole mounting, and Harwin's 101Lok retention system for secure mating. The connector is commonly used in aerospace, defense, robotics, industrial control, and other applications where vibration and shock resistance are essential. Key Features 12 contacts (6+6) in a double-row configuration 2.00 mm contact pitch Vertical through-hole PCB mounting 101Lok push-turn locking mechanism for secure retention Gold-plated contact area for excellent conductivity and corrosion resistance Tin-plated terminations for reliable soldering Phosphor bronze contacts for durability PPS (Polyphenylene Sulfide) housing with UL94V-0 flammability rating Polarized design prevents incorrect mating Operating temperature range: -55°C to +125°C Suitable for high-vibration and high-shock environments RoHS compliant Applications Aerospace and avionics Defense and military systems Robotics and automation Industrial control equipment Motorsport electronics Space and satellite systems #Harwin #Datamate #JTek #M805T11242MC #HighReliabilityConnector #BoardToBoardConnector #ThroughHoleConnector #IndustrialElectronics #AerospaceElectronics #Robotics #DefenseElectronics #EmbeddedSystems #PCBConnector #101Lok #ConnectorDesign

STM32WLE5JC is an ultra-low-power wireless microcontroller from STMicroelectronics that combines an Arm Cortex-M4 processor with an integrated Sub-GHz radio transceiver in a single chip. Designed for long-range, low-power IoT and LPWAN applications, it supports LoRa®, (G)FSK, (G)MSK, and BPSK modulation schemes, making it ideal for smart metering, industrial monitoring, agriculture, asset tracking, and remote sensing applications. The device offers a high level of integration, robust security features, and extensive peripheral support while maintaining very low power consumption. Key Features Arm Cortex-M4 32-bit MCU running at up to 48 MHz Integrated Sub-GHz radio transceiver (150 MHz to 960 MHz) Supports LoRa®, LoRaWAN®, (G)FSK, (G)MSK, and BPSK modulations Up to 256 KB Flash memory and 64 KB SRAM Ultra-low-power operation with multiple low-power modes Programmable RF output power up to +22 dBm High receiver sensitivity down to -148 dBm (LoRa mode) Hardware AES-256 encryption and True Random Number Generator (RNG) Public Key Accelerator (PKA) for enhanced security 12-bit ADC, 12-bit DAC, comparators, and DMA controllers Multiple communication interfaces: USART, LPUART, SPI, I²C Operating voltage range: 1.8 V to 3.6 V Operating temperature range: -40°C to +105°C Available in compact UFQFPN, UFBGA, and WLCSP packages #STM32WLE5JC #STM32WL #LoRa #LoRaWAN #SubGHz #WirelessMCU #CortexM4 #LPWAN #IoT #SmartMetering #IndustrialIoT #EmbeddedSystems #STMicroelectronics

3-to-8 line decoder/demultiplexer The 74HC238; 74HCT238 decodes three binary weighted address inputs (A0, A1 and A2) to eight mutually exclusive outputs (Y0 to Y7). The device features three enable inputs (E1 and E2 and E3). Every output will be LOW unless E1 and E2 are LOW and E3 is HIGH. This multiple enable function allows easy parallel expansion to a 1-of-32 (5 to 32 lines) decoder with just four '238 ICs and one inverter. The '238 can be used as an eight output demultiplexer by using one of the active LOW enable inputs as the data input and the remaining enable inputs as strobes. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. • Wide supply voltage range from 2.0 to 6.0 V • CMOS low power dissipation • High noise immunity • Demultiplexing capability • Multiple input enable for easy expansion • Ideal for memory chip select decoding • Active HIGH mutually exclusive outputs • Input levels: • For 74HC238: CMOS level • For 74HCT238: TTL level • Complies with JEDEC standards • JESD8C (2.7 V to 3.6 V) • JESD7A (2.0 V to 6.0 V) • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B • ESD protection: • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V • Multiple package options • Specified from -40 °C to +85 °C and from -40 °C to +125 °C #74HC238N #74HCSeries #CMOSLogic #DecoderIC #Demultiplexer #DigitalLogic #AddressDecoder #ChipSelect #LogicGate #IntegratedCircuit #ElectronicsDesign #EmbeddedSystems

10 Position Receptacle Connector 0.050" (1.27mm) Surface Mount Gold The SFM-105-02-X-D-A is a high-reliability dual-row socket connector designed for board-to-board and mezzanine interconnection applications. Manufactured by Samtec, this connector provides a compact and durable solution for connecting printed circuit boards in embedded systems, industrial electronics, communications equipment, test instruments, and high-performance computing platforms. The connector features precision-machined contacts that ensure consistent electrical performance, excellent mating reliability, and long operational life. Its low-profile design and high-density contact arrangement make it suitable for applications requiring space-efficient interconnect solutions while maintaining signal integrity and mechanical robustness. Engineering Specifications Manufacturer: Samtec Part Number: SFM-105-02-X-D-A Series: SFM Series Connector Type: Board-to-Board Socket Connector Contact System: Precision Socket Contacts Row Configuration: Dual Row Mounting Style: Through-Hole Contact Material: Copper Alloy Contact Finish: Gold-Plated Contact Interface Housing Material: High-Temperature Thermoplastic Mating Compatibility: Standard Samtec Header Systems Electrical Performance: High-Reliability Signal Interconnection Mechanical Durability: High Mating Cycle Life Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Embedded Systems, Industrial Control Equipment, Communication Systems, Data Acquisition Platforms, Instrumentation, Test Equipment, Computing Hardware, PCB Interconnect Solutions Key Features High-density dual-row socket configuration Precision-machined contacts for reliable electrical performance Gold-plated contact interface for enhanced conductivity and durability Compact footprint for space-constrained designs Excellent mating alignment and retention characteristics High mechanical durability for repeated insertion cycles Suitable for board stacking and mezzanine interconnections Compatible with a wide range of Samtec header connectors Designed for industrial and commercial electronic systems Supports reliable signal transmission in high-performance applications #SFM10502XDA #Samtec #BoardToBoardConnector #SocketConnector #DualRowConnector #PCBConnector #Interconnect #EmbeddedSystems #IndustrialElectronics #CommunicationSystems #Instrumentation #DataAcquisition #MezzanineConnector #ThroughHoleConnector #ElectronicComponents #PCBDesign #SignalIntegrity #HighReliability #ConnectorTechnology #EmbeddedHardware

20 Position Connector Header, Center Strip Contacts Surface Mount Gold DF30FC-20DP-0.4V(81) is a 20-position, 0.4 mm pitch, surface-mount (SMT) board-to-board mezzanine connector from the Hirose DF30 series. It is the plug/header (DP) side of the connector pair and is designed for ultra-low-profile, high-density PCB stacking applications commonly found in compact embedded systems, cameras, wireless modules, industrial electronics, and portable devices. The connector features gold-plated contacts for reliable electrical performance and supports a mating height of approximately 0.9 mm when paired with the corresponding receptacle. 20 contacts / positions 0.4 mm fine pitch for high-density designs Board-to-board (mezzanine) connector Surface-mount (SMT) mounting Ultra-low mating height (~0.9 mm) Gold-plated contacts for improved reliability Straight orientation Compact footprint for space-constrained applications Rated for approximately 50 mating cycles Operating temperature range: -35°C to +85°C RoHS compliant Typical Applications Embedded computing modules Camera and imaging systems Industrial control equipment IoT devices Portable electronics Wireless communication modules #Hirose #DF30Series #BoardToBoardConnector #MezzanineConnector #SMTConnector #HighDensityConnector #0p4mmPitch #EmbeddedSystems #IoT #ElectronicsDesign #PCBDesign #CompactElectronics #ConnectorSolutions

Pressure Sensor ±0.36PSI (±2.49kPa) Differential Male - 0.09" (2.24mm) Tube, Dual 14 b 8-DIP (0.620", 15.75mm), Dual Ports, Same Side The DLVR-L10D-E1BD-C-NI3N is a low-voltage, digital differential pressure sensor from Amphenol All Sensors' DLVR Series. It is designed to deliver highly accurate and temperature-compensated pressure measurements using proprietary CoBeam²™ sensing technology, which enhances long-term stability while minimizing package stress effects. The sensor features a 14-bit digital I²C output, operates from a 3.3 V supply, and measures differential pressures in the ±10 inH₂O range. Its compact through-hole DIP package with dual barbed ports makes it well suited for medical, HVAC, environmental monitoring, industrial control, and portable instrumentation applications. Key Features Differential pressure measurement: ±10 inH₂O 14-bit digital I²C interface 3.3 V low-voltage operation Proprietary CoBeam²™ MEMS technology for improved long-term stability Factory calibrated and temperature compensated Typical accuracy better than ±1% over temperature Dual barbed pressure ports (same-side orientation) Through-hole 8-pin DIP package Low-power operation suitable for battery-powered systems Designed for non-corrosive, non-ionic gases such as air and dry gases Ideal for medical breathing devices, HVAC, environmental monitoring, industrial automation, and portable equipment. #PressureSensor #DifferentialPressure #DigitalSensor #I2C #MEMS #AmphenolAllSensors #DLVRSeries #MedicalElectronics #HVAC #IndustrialAutomation #EnvironmentalMonitoring #EmbeddedSystems

26 MHz ±10ppm Crystal 9pF 40 Ohms 4-SMD, No Lead # TSX-3225 26.0000MF09Z-AC0 ## General Description The TSX-3225 26.0000MF09Z-AC0 is a high-precision surface-mount quartz crystal manufactured by Seiko Epson Corporation. It is designed to provide a stable and accurate clock reference for microcontrollers, wireless communication modules, RF transceivers, processors, and other digital electronic systems. The crystal utilizes advanced quartz resonator technology to deliver reliable frequency generation with excellent stability, low phase noise, and long-term performance. Its compact package and low-profile construction make it suitable for space-constrained applications including Internet of Things devices, industrial control systems, wireless sensors, communication equipment, consumer electronics, and embedded computing platforms. ## Key Features ### Frequency Characteristics * Precision quartz crystal resonator * Stable frequency generation * Excellent frequency accuracy * Low frequency drift * Reliable long-term frequency stability * Suitable for clock generation and timing applications ### Electrical Characteristics * Low equivalent series resistance * Reliable oscillator startup performance * Stable operation with low-power oscillator circuits * Optimized for microcontroller and RF applications * Consistent electrical characteristics across operating conditions ### Mechanical Characteristics * Surface-mount package construction * Compact footprint design * Low-profile structure * Automated assembly compatible * Reflow soldering compatible * Suitable for high-density PCB layouts ### Timing Performance * Accurate clock reference generation * Low phase noise characteristics * Stable timing performance * Reliable synchronization capability * Suitable for communication and processing systems ### Material Construction * High-quality quartz resonator element * Hermetically sealed package construction * Industrial-grade materials * RoHS-compliant design * Lead-free compatible manufacturing ### Environmental Characteristics * Long operational service life * Reliable operation under industrial conditions * Resistant to environmental stress * Stable performance across operating temperature ranges * High reliability for continuous operation ### Application Areas * Microcontroller Systems * Wireless Communication Modules * Bluetooth Devices * Wi-Fi Equipment * RF Transceivers * Internet of Things Devices * Industrial Automation Systems * Embedded Controllers * Consumer Electronics * Data Communication Equipment * Smart Sensors * Portable Electronic Products ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade Frequency Control Component ## Manufacturer Seiko Epson Corporation ## Product Family TSX Series Surface-Mount Quartz Crystals #TSX3225 #260000MF09ZAC0 #EpsonCrystal #QuartzCrystal #SMDCrystal #CrystalOscillator #FrequencyControl #ClockSource #EmbeddedSystems #WirelessElectronics #RFDesign #Microcontroller #IoTDevices #IndustrialElectronics #ElectronicsEngineering

Metallic Case - 1 500 VDC Isolation, Hi-Rel DC-DC Converter The MGDS-04-J-C/M/S is a high-reliability 4 W isolated DC-DC converter module designed for demanding industrial, transportation, military, and aerospace applications. It belongs to the MGDS-04 series and features a 16–40 VDC input range (J input code), a regulated 5 VDC single output (C output code), and galvanic isolation between the input and output. The /S suffix indicates that the module undergoes screening and serialization for enhanced reliability and traceability, making it suitable for mission-critical systems. Key Features 4 W isolated DC-DC converter Wide 16–40 VDC input voltage range Regulated 5 VDC single output High-efficiency power conversion Input-to-output galvanic isolation Designed for industrial, defense, aerospace, and transportation applications Built-in protection features (including short-circuit protection) Compact encapsulated module for PCB mounting /S option provides screening and serialization for improved quality assurance and traceability #DCDCConverter #PowerModule #IsolatedPower #IndustrialElectronics #Aerospace #MilitaryElectronics #EmbeddedSystems #PowerSupply #HighReliability #PCBDesign