Part Metadata Review and Update
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 5 sec
I’ll review the part metadata and current symbol/footprint, find and attach the official datasheet if needed, then cross-check pins and summarize any mismatches.
Worked for 3 mins 4 sec
Reviewed the DLVR-L10D-E1BD-C-NI3N metadata, datasheet, symbol pins, and footprint. No required fixes were found: pinout and footprint match the E1BD datasheet; the only notes are that the Datasheet URL already points to an uploaded copy rather than the manufacturer-hosted PDF, and the footprint drill appears as 0.94 mm in the KiCad asset vs 0.9 mm in imported pad rules.
Full report saved in the project document: Part Review — DLVR-L10D-E1BD-C-NI3N.
Update URL, verify BOM
Use official datasheet
Run design checks
Check BOM metadata
Verify footprint drill
Name
Pin #
Type
Part Type
Pin Description
Pin Group
GND
1
Ground
Terminal
Ground reference / supply return
Ground
VS
2
Power In
Terminal
3.3 V supply input (Vs), characterized at 3.3 V ±5%
Power
SDA/MISO
3
Bi-Directional
Terminal
I²C SDA for NI3N option; family pin also used as SPI MISO
I2C
SCL/SCLK
4
Input
Terminal
I²C SCL for NI3N option; family pin also used as SPI SCLK
I2C
INT/SS
5
Output
Terminal
Interrupt output for NI3N I²C option; family pin also used as SPI slave select
I2C
DO_NOT_CONNECT_1
6
Not Connected
Terminal
Do not connect per datasheet
No Connect
DO_NOT_CONNECT_2
7
Not Connected
Terminal
Do not connect per datasheet
No Connect
DO_NOT_CONNECT_3
8
Not Connected
Terminal
Do not connect per datasheet
No Connect
DLVR-L10D-E1BD-C-NI3N
