Digital Temperature Sensor – 16-bit digital temperature sensor with I²C/SMBus 3.0 interface for local temperature measurement from −40°C to +125°C. Operates from a 1.5 V to 3.6 V supply and provides ±0.5°C accuracy over the −10°C to +60°C range. Features programmable temperature thresholds, ALERT output, one-shot mode, support for up to 1 MHz I²C clock, and up to four selectable I²C addresses. Housed in a 6-pin UDFN (2 × 2 mm) package. #STMicroelectronics #STTS22H #STTS22HTR #TemperatureSensor #DigitalTemperatureSensor #I2C #SMBus #16Bit #TemperatureMonitoring #UDFN6 #EmbeddedSystems #Sensors

Spring-Loaded Pogo Pin Connector – 4-position through-hole spring-loaded connector for board-to-board power and signal connections. Features a 2.00 mm pitch, single-row configuration, precision-machined copper alloy contacts with gold plating, 2 A continuous current rating (3 A peak) per contact, 100 Vrms/150 VDC voltage rating, 20 mΩ maximum contact resistance, 10 GΩ minimum insulation resistance, and 700 Vrms minimum dielectric strength. Provides 0.7 mm (0.0275 in) nominal spring travel, 1.4 mm (0.055 in) maximum travel, and up to 1,000,000 mating cycles. Designed for through-hole PCB mounting with a high-temperature thermoplastic insulator. #MillMax #8362200410001101 #PogoPin #SpringLoadedConnector #BoardToBoard #ThroughHole #4Position #2mmPitch #GoldPlatedContacts #SignalConnector #PowerConnector #EmbeddedSystems

Single-Row Female Socket Header – 22-position single-row female socket header for board-to-board and wire-to-board interconnection. Features a 2.54 mm (0.100") pitch, through-hole PCB mounting, solder termination, 3 A current rating per contact, and 250 V voltage rating. Constructed with gold flash-plated phosphor bronze contacts for enhanced corrosion resistance and a black UL94 V-0 polyester insulator. Supports push-pull mating, provides a 3.20 mm post length and 8.51 mm insulation height, and is specified for operation over a −40°C to +105°C temperature range. #SullinsConnectorSolutions #PPPC221LFBNRC #FemaleHeader #FemaleSocket #BoardToBoard #ThroughHole #22Position #2_54mmPitch #GoldPlatedContacts #PCBConnector #Interconnect #EmbeddedSystems

Sub-GHz Wireless Microcontroller – Ultra-low-power Sub-GHz wireless microcontroller integrating a 64 MHz Arm® Cortex®-M0+ core with an RF transceiver for LPWAN, smart metering, industrial IoT, building automation, asset tracking, and wireless sensor networks. Features 128 KB Flash, 32 KB SRAM, and supports Sub-GHz operation from 413–479 MHz and 826–958 MHz (including regional ISM bands), with up to +20 dBm transmit power, −132 dBm receiver sensitivity, and data rates up to 600 kbps. Supports Sigfox, KNX RF, IEEE 802.15.4g, Mioty, and proprietary wireless protocols using 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, ASK, OOK, DBPSK, and DSSS modulation. Operates from a 1.7 V to 3.6 V supply and includes 17 GPIOs, 12-bit ADC, timers, DMA, SPI, I²C, UART/USART, I²S, IrDA, PWM, watchdog, AES hardware accelerator, true random number generator (TRNG), and low-power wake-up receiver. Specified for operation over a −40°C to +105°C temperature range and housed in a 32-pin VFQFPN (5 × 5 mm) package. #STMicroelectronics #STM32WL33KBV7 #STM32WL33 #SubGHzMCU #WirelessMCU #CortexM0Plus #LPWAN #Sigfox #KNXRF #IEEE802154g #Mioty #IoT #EmbeddedSystems

IoT Secure Element with EdgeLock® SE051 Security Technology – Hardware-based secure element IC designed for IoT security, connected devices, industrial automation, smart home systems, automotive applications, cloud authentication, and embedded cybersecurity solutions. Provides a tamper-resistant secure environment for cryptographic key storage, device identity protection, secure authentication, and trusted communication. Features Common Criteria EAL5+ certified secure hardware, EdgeLock® secure architecture, ECC and RSA cryptographic support, AES encryption/decryption, SHA-2 hashing, HMAC, True Random Number Generator (TRNG), secure key generation, and secure object storage for protecting sensitive credentials and certificates. Supports I²C communication interface with host microcontrollers and is compatible with secure cloud platforms and IoT provisioning workflows. Operates from a 1.71 V to 3.6 V supply, supports −40°C to +105°C industrial temperature operation, and is housed in a compact 20-HX2QFN (3 × 3 mm) surface-mount package. #NXP #SE051C2HQ1Z01XDZ #EdgeLockSE051 #SecureElement #IoTSecurity #HardwareSecurity #Cryptography #SecureAuthentication #AES #ECC #RSA #TRNG #IndustrialIoT #EmbeddedSystems

High-Precision Multi-Band RTK GNSS Receiver Module – Multi-band GNSS receiver module designed for real-time kinematic (RTK) positioning, precision agriculture, surveying, autonomous robots, UAVs, industrial automation, asset tracking, and embedded navigation systems. Supports concurrent reception of GPS, Galileo, GLONASS, BeiDou, QZSS, SBAS, and NavIC signals on L1/L2/L5 frequency bands, delivering centimeter-level positioning accuracy with RTK and PPP-RTK correction services. Features up to 25 Hz navigation update rate, −167 dBm tracking sensitivity, UART, USB, I²C, and SPI host interfaces, RAW GNSS measurement output, RTCM 3.x input/output, NTRIP compatibility, time pulse output, and integrated RTK engine for high-precision positioning. Operates from a 2.7 V to 3.6 V supply, consumes approximately 0.5 W typical, and is specified for operation over a −40°C to +85°C temperature range. Packaged in a compact 54-pin LGA module (22 × 17 mm) for embedded integration. #u-blox #ZEDF9P05B #RTKGNSS #HighPrecisionGNSS #MultiBandGNSS #GPS #Galileo #BeiDou #GLONASS #Surveying #AutonomousRobotics #PrecisionAgriculture #EmbeddedSystems

Synchronous Buck DC-DC Converter – 2 A synchronous step-down (buck) switching regulator for high-efficiency power conversion in industrial, automotive, and embedded applications. Operates from a 4.5 V to 36 V input voltage, provides an adjustable output voltage from 0.6 V to 34.2 V, and switches at a 500 kHz fixed frequency. Features 40 µA typical quiescent current, 100% duty-cycle operation, synchronous rectification, cycle-by-cycle current limiting, hiccup short-circuit protection, thermal shutdown, undervoltage lockout (UVLO), power-good output, and enable input. Operates over a −40°C to +150°C junction temperature range and is housed in a 6-pin SOT-23-THIN (DDC) package. #TexasInstruments #LMR51420 #LMR51420XDDCR #BuckConverter #DCDCConverter #SynchronousBuck #SwitchingRegulator #PowerManagement #2A #SIMPLESWITCHER #SOT236 #EmbeddedSystems

ARM® Cortex®-M33 STM32L5 Microcontroller IC 32-Bit 110MHz 512KB (512K x 8) FLASH 48-LQFP (7x7) Microcontroller for ultra-low-power embedded control applications, based on an Arm® Cortex®-M33 32-bit core with TrustZone®, FPU, and DSP instructions operating at up to 110 MHz. It features 512 KB Flash, 256 KB SRAM, a 1.71 V to 3.6 V supply range, USB 2.0 Full-Speed, FDCAN, I²C, SPI, USART/UART, SDMMC, OCTOSPI interfaces, dual 12-bit ADCs, dual 12-bit DACs, and is housed in a 48-pin LQFP package. #STMicroelectronics #STM32L562CET6 #STM32L5 #Microcontroller #ArmCortexM33 #TrustZone #UltraLowPower #EmbeddedSystems #512KBFlash #256KBSRAM #110MHz #LQFP48 #USBFS #FDCAN #I2C #SPI #UART #SDMMC #OCTOSPI #ADC #DAC

32-Bit ARM Cortex-R4F Microcontroller – Safety-oriented automotive microcontroller with 3 MB Flash and 256 KB RAM, operating at up to 160 MHz. The Texas Instruments TMS5703137DPGEQQ1 integrates 24-channel 12-bit ADCs, 64 KB EEPROM, and interfaces including CAN, Ethernet, FlexRay, I²C, LIN, SPI/MibSPI, SCI, and UART/USART. It operates from 1.14 V to 3.6 V, supports 58 I/Os, and is housed in a 144-pin LQFP (20 × 20 mm) package with an operating temperature range of −40°C to +125°C. #TexasInstruments #TMS5703137DPGEQQ1 #TMS570 #CortexR4F #Microcontroller #MCU #AutomotiveMCU #CAN #FlexRay #Ethernet #ADC #EmbeddedSystems

FFC/FPC Connector – 22-position right-angle FFC/FPC connector with 0.50 mm pitch for board-to-cable interconnection. Features bottom contacts, Zero Insertion Force (ZIF) slide-lock actuator, surface-mount solder termination, 0.5 A current rating, 50 V voltage rating, and supports 0.30 mm FFC/FPC thickness. Includes solder retention tabs, gold-plated phosphor bronze contacts, 2.0 mm profile above the PCB, and is specified for 20 mating cycles over an operating temperature range of −40°C to +85°C. #Molex #0524372271 #EasyOn #FFCConnector #FPCConnector #ZIFConnector #22Position #0_5mmPitch #BottomContact #SurfaceMount #BoardToCable #EmbeddedSystems

High-precision multi-band GNSS receiver module supporting GPS, Galileo, GLONASS, BeiDou, and QZSS with L1/L5 signal reception and integrated RTK and PPP-RTK positioning technologies. Operates from a 2.7 V to 3.6 V supply, provides −167 dBm tracking sensitivity, and supports I²C, SPI, UART, and USB host interfaces. Housed in a 54-pin LGA package (22 × 17 mm) and specified for an operating temperature range of −40°C to +85°C. #uBlox #ZEDF9P #ZEDF9P15B #GNSS #GNSSReceiver #RTK #PPPRTK #GPS #Galileo #GLONASS #BeiDou #QZSS #L1 #L5 #I2C #SPI #UART #USB #LGA54 #EmbeddedSystems

Mini ISO Relay PCB Socket – 5-position through-hole relay socket designed for automotive electronics, industrial control systems, power distribution modules, automotive ECUs, heavy equipment, and embedded relay-based applications. Part of the TE Connectivity Potter & Brumfield VF4 Series, it is specifically designed for use with VF4-1 and VF4-4 Mini ISO relays, providing a secure and serviceable PCB-mounted relay interface. Features through-hole PCB mounting, PC pin termination, and a compact 5-position socket design that simplifies relay replacement without soldering. Built for reliable operation in demanding automotive and industrial environments, it offers robust mechanical support for high-current relay applications while reducing maintenance time. Supplied in bulk packaging and intended for printed circuit board assembly. #TEConnectivity #VCF41000 #VF4Series #RelaySocket #MiniISORelay #ThroughHole #PCBRelaySocket #AutomotiveElectronics #IndustrialControl #PowerDistribution #EmbeddedSystems

Battery Power Management IC Multi-Chemistry 14-TSSOP The bq34210-Q1 1-Series Cell System-Side CEDV Fuel Gauge provides fuel gauging and End-of-Service (EOS) Determination for 1-series cell batteries in applications that encounter infrequent discharge, such as eCall systems and uninterruptible power supplies (UPS) for backup during power failures, where batteries may stay connected to a charging power source most of their lifetime until needed. The bq34210-Q1 fuel gauge supports multiple battery chemistries, including Li-Ion, LiFePO4, and NiMH. The gas gauging function uses voltage, current, and temperature data along with Compensated End-ofDischarge (CEDV) technology to provide State-ofCharge (SOC) and State-of-Health (SOH) data. The device's EOS Determination function alerts when battery capability has degraded and is approaching the end of its usable service. Battery fuel gauging with the bq34210-Q1 fuel gauge requires connections only to PACK+ (P+) and PACK– (P–) for a removable battery pack or embedded battery management system. Features 1• Automotive-Qualified AEC-Q100, Grade 3 • 1-Series Cell Battery Fuel Gauge Supports Li-Ion, LiFePO4, and NiMH (3-Cell) Chemistries – Resides on System Board – Powers Directly from the Battery with Integrated LDO – Supports a Low-Value External Sense Resistor (10 mΩ) • Learning Load Enable (LEN) from Host • Ultra-Low Power Consumption in NORMAL (50 µA) and SLEEP (9 µA) Modes • Supports Replacement Batteries • Accurate End-of-Service (EOS) Determination for Batteries in Rarely Discharged Applications • CEDV Gas Gauge for 1-Series Cell Batteries, Providing: – State-of-Charge (SOC) – Time-to-Empty (TTE) – State-of-Health (SOH) • High-Side and Low-Side Current Sensing Options • Internal Temperature Sensor OR External Thermistor • Microcontroller Peripheral Interface Supports: – 400-kHz I 2C™ Serial Interface – Configurable Interrupt (ALERT) for SOC, Battery Levels, Temperature Faults, and Charge/Discharge Status 2 Applications • eCall Systems • Telematics Backup Systems • Uninterruptible Power Supply (UPS) Backup Systems • Emergency Battery Power Modules #BatteryFuelGauge #BatteryManagement #FuelGaugeIC #AutomotiveElectronics #TexasInstruments #LiIonBattery #LiFePO4 #I2C #PowerManagement #AECQ100 #BackupBattery #UPS #EmbeddedSystems

32-bit ARM Cortex-M3 microcontroller operating at up to 72 MHz, featuring 512 KB Flash memory, 64 KB SRAM, and 80 programmable I/O pins. Operates from a 2.0 V to 3.6 V supply and integrates 3 × 12-bit ADCs (16 channels), 2 × 12-bit DACs, multiple timers with PWM capability, and communication interfaces including CAN, USB, I²C, SPI, I²S, SDIO, UART, and USART. Housed in a 100-pin LQFP package. #STM32 #STM32F103VET6 #Microcontroller #ARMCortexM3 #32BitMCU #72MHz #512KBFlash #64KBSRAM #LQFP100 #EmbeddedSystems #CAN #USB #SPI #I2C #UART #SDIO #ADC #DAC #STMicroelectronics

Board-to-Wire Header Connector – 6-position, right-angle, through-hole male pin header for board-to-wire connections with 3.5 mm pitch. Features a shrouded 4-wall housing, latch holder, board guide, tin-plated brass contacts, and glass-filled PBT insulator. Rated for 3 A per contact, supports an operating temperature range of −40°C to +125°C, and is designed for waterproof automotive applications. #JAE #MX44006NF1 #MX44 #Connector #BoardToWire #HeaderConnector #RightAngle #ThroughHole #6Pin #3_5mmPitch #AutomotiveConnector #WaterproofConnector #EmbeddedSystems

High-Speed Differential Pair Board-to-Board Socket Connector – 80-position differential pair mezzanine socket connector designed for high-speed board-to-board interconnects, FPGA platforms, networking equipment, industrial control, embedded computing, and high-speed communication systems. Features a 0.50 mm pitch, 2-row surface-mount (SMT) design, and 2 A current rating per contact with a 175 VAC voltage rating. Part of Samtec's Q Strip® QSH series, it includes differential pair signal routing, an integrated ground plane (Ground Bus) for improved signal integrity, alignment pins, and gold-plated phosphor bronze contacts (3 µin / 0.076 µm) for high reliability and repeated mating cycles. Supports multiple mating stack heights (5 mm to 25 mm), utilizes an LCP (Liquid Crystal Polymer) housing, operates over a −55°C to +125°C temperature range, and is supplied in a tape-and-reel package for automated assembly. #Samtec #QSH04001FDDDPAKTR #QStrip #BoardToBoardConnector #MezzanineConnector #DifferentialPair #HighSpeedConnector #SMTConnector #FPGA #SignalIntegrity #EmbeddedSystems #IndustrialElectronics

24 Bit Analog to Digital Converter 4, 8 Input 4 Sigma-Delta 56-VQFN (7x7) The ADS127L14 (quad) and ADS127L18 (octal) are 24-bit, delta-sigma (ΔΣ), analog-to-digital converters (ADCs) based on the single-channel ADS127L11. The devices provide simultaneous sampling of four or eight channels with data rates up to 512kSPS (wideband filter mode) and 1365kSPS (low-latency filter mode). Features • Simultaneously measure four or eight channels • Wideband filter mode: up to 512kSPS • Low-latency filter mode: up to 1365kSPS • Power-scalable speed modes: – Max speed: 512kSPS • 83mW (ADS127L14) • 165mW (ADS127L18) – High speed: 400kSPS • 64mW (ADS127L14) • 128mW (ADS127L18) – Mid speed: 200kSPS • 37mW (ADS127L14) • 74mW (ADS127L18) – Low speed: 50kSPS • 12mW (ADS127L14) • 24mW (ADS127L18) • AC performance with DC precision: (High-Speed Mode) – Dynamic range at 200kSPS: 112dB (typical) – THD: –118dB (typical) – INL: 1ppm of FSR (typical) – Offset drift: 10nV/°C (typical) – Gain drift: 0.5ppm/°C (typical) • Precharge buffered signal inputs • Programmable by pin setting or SPI • Frame-sync port for output data • Internal or external clock operation • Analog supply voltage: 2.85V to 5.5V 2 Applications • Test and measurement: – Data acquisition (DAQ) – Shock and vibration instruments – Acoustics and dynamic strain gauges • Factory automation and control: – Condition monitoring • Aerospace and defense: – Sonar • Medical: – Electroencephalograms (EEG) • Grid Infrastructure: – Power quality analyzers #ADS127L14IRSHT #TexasInstruments #ADC #DeltaSigmaADC #24BitADC #SimultaneousSampling #DataAcquisition #IndustrialAutomation #MedicalInstrumentation #PowerQuality #PrecisionMeasurement #EmbeddedSystems

Single-channel high-side N-channel load switch for power distribution, supporting an input voltage range of 1.0 V to 5.5 V and up to 3 A continuous output current. Features 25 mΩ typical ON resistance, controlled slew rate, quick output discharge (150 Ω), thermal shutdown protection, and a non-inverting ON/OFF control input. Housed in a 4-pin UQFN-HR (0.85 × 0.75 mm) package. #TexasInstruments #TPS22991 #TPS22991BRAAR #LoadSwitch #PowerSwitch #HighSideSwitch #PowerManagement #PMIC #NChannel #3A #LowRon #UQFN4 #EmbeddedSystems

CYW43439, RP2040 - 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® 5.x (BLE) Transceiver 2.4GHz Evaluation Board Raspberry Pi Pico W / SC0918 Wireless Microcontroller Development Board designed for embedded applications, featuring the Raspberry Pi RP2040 microcontroller with dual-core Arm Cortex-M0+ processor running at up to 133 MHz, 264 kB SRAM, 2 MB onboard flash memory, and integrated 2.4 GHz 802.11n wireless LAN connectivity. The board provides GPIO, SPI, I²C, UART, ADC, PWM, and USB 1.1 interfaces for flexible hardware integration. #RaspberryPi #PicoW #RP2040 #WirelessMCU #EmbeddedSystems #IoT #DevelopmentBoard

Isolated DC-DC Converter Module – Single-output isolated DC-DC converter providing a regulated 5 V output at up to 4 A (20 W) from a 9 V to 36 V DC input. Features 1.6 kVDC input-to-output isolation, up to 88% efficiency, remote ON/OFF control, output voltage trimming (±10%), and integrated overcurrent protection (OCP), overvoltage protection (OVP), and short-circuit protection (SCP). Operates over a −40°C to +63°C temperature range at full load and is housed in a 6-DIP through-hole module (2" × 1"). #RECOM #RP202405SFW #DCDCConverter #IsolatedConverter #PowerModule #20W #5VOutput #9To36VInput #1_6kVIsolation #ThroughHole #PowerManagement #EmbeddedSystems

Dual Non-Inverting Open-Drain Buffer IC – Dual non-inverting buffer with open-drain outputs for logic level translation, bus interfacing, signal buffering, wired-AND logic, and embedded digital systems. Operates from a 1.65 V to 5.5 V supply and features two independent 1-bit buffer channels capable of sinking up to 32 mA per output. The open-drain outputs allow direct interfacing with multiple voltage domains using external pull-up resistors, making the device suitable for I²C buses, interrupt lines, LED driving, and mixed-voltage logic applications. Features high-speed CMOS operation, low static power consumption, 5.5 V input tolerance, and is specified for operation over a −40°C to +85°C ambient temperature range. Housed in a 6-pin SC-88 (SC-70-6 / SOT-363) surface-mount package. #onsemi #NC7WZ07P6X #LogicBuffer #OpenDrain #NonInvertingBuffer #LogicIC #LevelShifter #I2C #SignalBuffer #WiredAND #SC88 #EmbeddedSystems

Ultra-Low-Power Omnipolar Hall-Effect Switch – Digital omnipolar Hall-effect switch optimized for lid/door detection, proximity sensing, magnetic position detection, industrial controls, consumer electronics, and battery-powered embedded systems. Operates from a 1.65 V to 5.5 V supply with an ultra-low 3 µA maximum supply current, making it ideal for low-power applications. Features a push-pull digital output, omnipolar operation (responds to either north or south magnetic poles), sleep mode, and high magnetic sensitivity with ±3 mT typical operate point and ±0.8 mT typical release point. Supports up to 5 mA output current, provides built-in hysteresis for noise immunity, and operates over a −40°C to +125°C temperature range. Housed in a compact 3-pin SOT-23 (DBZ) surface-mount package. #TexasInstruments #TMAG5231C1DQDBZR #TMAG5231 #HallEffectSensor #OmnipolarSwitch #MagneticSensor #PositionSensor #ProximitySensor #LowPower #BatteryPowered #SOT23 #EmbeddedSystems

Accelerometer, Gyroscope, Temperature, 6 Axis Sensor I2C, I3C, SPI Output The ASM330LHHX is a 6-axis IMU featuring a 3-axis digital accelerometer and a 3‑axis digital gyroscope with an extended temperature range up to +105°C, designed to address automotive nonsafety applications. ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers and gyroscopes to serve both the automotive and consumer markets. The ASM330LHHX is AEC-Q100 compliant and industrialized through a dedicated MEMS production flow to meet automotive reliability standards. All the parts are fully tested with respect to temperature to ensure the highest quality level. The sensing elements are manufactured using ST’s proprietary micromachining processes, while the IC interfaces are developed using CMOS technology that allows the design of a dedicated circuit, which is trimmed to better match the characteristics of the sensing element. Features • AEC-Q100 qualified • Android Auto™ compliant and CarPlay® compliant • Extended temperature range from -40 to +105°C • Embedded compensation for high stability over temperature • Accelerometer user-selectable full scale up to ±16 g • Extended gyroscope range from ±125 to ±4000 dps • Dual operating modes: high-performance and low-power mode • I²C, MIPI I3C℠, and SPI serial interfaces • Six-channel synchronized output to enhance accuracy of dead-reckoning algorithms • Programmable finite state machine • Machine learning core • Smart programmable interrupts • Embedded 3 KB FIFO available to underload host processor • ECOPACK and RoHS compliant Applications • Dead reckoning (DR) • Vehicle-to-everything (V2X) • Telematics, e-tolling • Antitheft systems • Impact detection and crash reconstruction • Motion-activated functions • Driving comfort • Vibration monitoring and compensation #ASM330LHHXTR #STMicroelectronics #IMU #MEMS #Accelerometer #Gyroscope #AutomotiveElectronics #MotionSensor #MachineLearning #SensorFusion #AECQ100 #EmbeddedSystems

Chip Ferrite Bead for EMI Suppression – Surface-mount ferrite bead designed for power-line noise filtering, EMI suppression, DC-DC converters, automotive electronics, industrial control systems, IoT devices, communication equipment, and embedded electronic applications. The Murata BLM18KG601SN1D is part of the EMIFIL® BLM18 Series, providing 600 Ω impedance at 100 MHz in a compact 0603 (1608 Metric) package to effectively attenuate high-frequency noise while allowing DC current to pass with minimal loss. Rated for 1.3 A maximum current with a 150 mΩ maximum DC resistance, it offers an excellent balance of noise suppression and low power loss. Constructed for surface-mount assembly, it operates over a −55°C to +125°C temperature range, making it suitable for both consumer and industrial embedded designs. #Murata #BLM18KG601SN1D #EMIFIL #FerriteBead #EMIFilter #NoiseSuppression #PowerLineFilter #0603 #IndustrialElectronics #PowerManagement #EmbeddedSystems #EMC