I’ll audit the part metadata, find and attach an official datasheet if missing, then compare the symbol/footprint/pin descriptions against the datasheet and summarize any mismatches.
I found the official Molex customer drawing for 524372271 and added it as the part’s Datasheet URL; now I’m checking the terminals and footprint against that source.
Completed the part audit and added the official Molex drawing as the part’s Datasheet URL. I created the detailed report here: Part Audit - Molex 0524372271 / 52437-2271.
Open items:
Likely footprint mismatch: P1/P2 fitting-nail pads appear inward and slightly oversized versus the Molex drawing.
Symbol metadata is incomplete: pin descriptions are missing and all pin types are Unspecified.
Suggested next steps:
Update P1/P2 footprint pads after final visual confirmation against the Molex drawing.
Add pin descriptions for pins 1–22 and P1/P2.
Change pin types from Unspecified to passive/mechanical as appropriate.
I also filed an internal Flux part-quality report for the likely fitting-nail footprint issue.