I’ll inspect the current part metadata, find and set an official datasheet URL if missing, then compare symbol/footprint/pin details against the datasheet and report any mismatches.
I found an official Mill-Max catalog PDF for the 836/838 series; the current Datasheet URL points to the Mill-Max product page, so I’ll update it to the official PDF and continue the cross-check.
Worked for 2 hrs 12 mins
Created a project doc
Part Verification Report: Mill-Max 836-22-004-10-001101
Completed the part review and updated the Datasheet URL to the official Mill-Max catalog PDF. I created the detailed findings in Part Verification Report.
Open items flagged:
Mount property is Wire, but should be Through Hole.
Footprint pitch/pin count look correct, but drill/pad sizes are likely undersized versus the manufacturer drawing.
Pin descriptions are missing; terminal pin type is Unspecified rather than passive/contact-style.
Suggested next steps:
Update metadata Mount to Through Hole.
Add pin descriptions Contact 1 through Contact 4.
Confirm and resize footprint holes/pads to the Mill-Max recommended land pattern.