Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, plastic package. ► Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) ► Power consumption scales automatically with bandwidth ► User-selectable resolution ► Fixed 10-bit resolution ► Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges) ► Embedded memory management system with FIFO technology minimizes host processor load ► Single tap/double tap detection ► Activity/inactivity monitoring ► Free-fall detection ► Supply voltage range: 2.0 V to 3.6 V ► I/O voltage range: 1.7 V to VS ► SPI (3- and 4-wire) and I2C digital interfaces ► Flexible interrupt modes mappable to either interrupt pin ► Measurement ranges selectable via serial command ► Bandwidth selectable via serial command ► Wide temperature range (−40°C to +85°C) ► 10,000 g shock survival ► Pb free/RoHS compliant #commonpartslibrary #sensor #transducer #accelerometer

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-S3-WROOM-1-N16R8 is a high-performance Wi-Fi + Bluetooth Low Energy (BLE) module developed by Espressif Systems. It is built around the ESP32-S3 SoC, featuring a dual-core Xtensa LX7 32-bit processor running up to 240 MHz. This module integrates 16 MB Flash memory and 8 MB PSRAM, making it suitable for memory-intensive applications such as AI, image processing, and advanced IoT systems. It also includes an onboard PCB trace antenna, RF circuitry, crystal oscillator, and power management components—allowing designers to quickly integrate wireless connectivity into compact embedded designs. Key Features Processing & Memory Dual-core Xtensa LX7 CPU, up to 240 MHz 384 KB ROM, 512 KB SRAM + 16 KB RTC SRAM 16 MB Flash (Quad SPI) 8 MB PSRAM (Octal/Quad SPI) Connectivity 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 (LE) + Mesh support Integrated PCB antenna Peripherals & Interfaces Up to 36 GPIOs Interfaces: UART, SPI, I2C, I2S, PWM, ADC, USB OTG Built-in USB Serial/JTAG support Supports touch sensors, timers, watchdogs, CAN (TWAI) Electrical Characteristics Supply voltage: 3.0 V – 3.6 V TX power: up to ~20.5 dBm RX sensitivity: ~-103.5 dBm Operating temp: −40 °C to +65 °C (typical) Advanced Capabilities Optimized for AI acceleration (vector instructions) Suitable for voice recognition, image processing, and edge AI Low-power modes for battery-operated devices| Typical Applications IoT devices and sensor hubs Smart home & home automation AIoT (voice/image recognition) Industrial automation & monitoring Wearables and health devices USB-connected embedded systems #Module #RF-Transceiver #ESP32-S3

Two 150MHz Arm Cortex-M33 cores, with floating point and DSP support, 48 GPIOs, 2MB FLASH, 520KB of on-chip SRAM, Arm TrustZone for Cortex-M, 8KB OTP memory,SHA-256 acceleration 10×10mm, QFN80 package pico 2 #pico2 #pico #mcu #RPi #raspberry #pi #arm

Two 150MHz Arm Cortex-M33 cores, with floating point and DSP support, 30 GPIOs, 2MB FLASH, 520KB of on-chip SRAM, Arm TrustZone for Cortex-M, 8KB OTP memory,SHA-256 acceleration 7×7mm, QFN60 package pico 2 #pico2 #pico #mcu #RPi #raspberry #pi #arm

Two 150MHz Arm Cortex-M33 cores, with floating point and DSP support, 30 GPIOs, no FLASH, 520KB of on-chip SRAM, Arm TrustZone for Cortex-M, 8KB OTP memory,SHA-256 acceleration 7×7mm, QFN60 package pico 2 #pico2 #pico #mcu #RPi #raspberry #pi #arm

ADXL345 iMEMS® Accelerometer, 3 Axis Sensor Evaluation Board The ADXL345 measures acceleration in three axes (X, Y, Z) and outputs digital data via either I²C or SPI interfaces. It is widely used in applications like tilt sensing, vibration monitoring, free-fall detection, and motion-based user interfaces. Its high resolution (up to 13-bit) allows it to detect very small changes in motion, making it suitable for both consumer electronics and industrial applications. Key Features 3-axis acceleration measurement (X, Y, Z) Selectable measurement ranges: ±2g, ±4g, ±8g, ±16g High resolution (13-bit) with up to 4 mg/LSB sensitivity Digital output interfaces: I²C and SPI Low power consumption: ideal for battery-powered devices Built-in motion detection functions: Tap and double-tap detection Free-fall detection Activity and inactivity monitoring Wide bandwidth range: supports various data rates for different applications Operating voltage: typically 2.0V to 3.6V Compact package: small LGA form factor suitable for space-constrained designs Common Applications Smartphones and tablets (screen rotation, motion sensing) Wearable devices and fitness trackers Gaming controllers Robotics and drones Vibration and shock monitoring systems #commonpartslibrary #developmentboard #evaluationboard #sensor

Accelerometer X, Y, Z Axis ±2g, 4g, 8g 1.5kHz 14-CLCC (6x6) General Description The ADXL355BEZ is a low noise, low drift, low power, three-axis MEMS accelerometer intended for high-precision sensing applications. It delivers high-resolution digital acceleration data with excellent long-term stability and minimal temperature-induced variation. The device integrates a complete sensing chain, including the MEMS sensor element, analog conditioning, analog-to-digital conversion, and digital filtering. Output data is provided through SPI or I²C interfaces, enabling straightforward integration into embedded and industrial systems. Key Features Three-axis acceleration sensing (X, Y, Z) Selectable full-scale ranges: ±2 g, ±4 g, ±8 g Low noise density (~25 µg/√Hz) Low offset and minimal temperature drift High-resolution 20-bit digital output Integrated digital filtering SPI and I²C communication interfaces Low power consumption (~200 µA typical) Wide supply voltage range (2.25 V to 3.6 V) Integrated temperature sensor Hermetically sealed package Applications Structural health monitoring Vibration measurement and analysis Tilt and inclination sensing Industrial condition monitoring Navigation and inertial systems Seismic detection Robotics and stabilization platforms Functional Description The ADXL355BEZ includes an integrated sensing and processing architecture composed of: Three-axis MEMS sensing element Analog front-end signal conditioning High-resolution ADC Digital filtering and decimation stages Temperature sensing element Digital communication interface (SPI/I²C) Configuration and control registers Electrical Characteristics (Typical) Supply voltage: 2.25 V to 3.6 V Supply current: ~200 µA Output data rate: up to 4 kHz Noise density: ~25 µg/√Hz Resolution: 20-bit Interface: SPI / I²C Mechanical and Package Information Package type: LGA (Land Grid Array) Approximate dimensions: 3 mm × 5 mm × 1 mm Hermetically sealed for improved environmental robustness Interface and Communication Supports SPI (4-wire) and I²C protocols Outputs 20-bit acceleration data per axis Data format: two’s complement Measurement Ranges ±2 g ±4 g ±8 g Environmental Specifications Operating temperature range: -40°C to +125°C Storage temperature range: -55°C to +150°C Power Management Supports measurement and standby modes Designed for low-power operation in continuous sensing applications Compliance and Reliability Industrial-grade device Designed for long-term stability RoHS compliant #commonpartslibrary #sensor #accelerometer

Accelerometer X, Y, Z Axis ±400g 160Hz ~ 2.56kHz 16-LGA (3x3.25) The ADXL373BCCZ-RL7 is an ultralow power, high-g digital MEMS accelerometer developed by Analog Devices for motion sensing and impact detection applications. The device is optimized for battery-powered and always-on systems requiring continuous acceleration monitoring with minimal power consumption. It supports selectable measurement ranges suitable for shock, vibration, and activity monitoring in industrial, wearable, medical, asset tracking, and IoT applications. The accelerometer integrates embedded motion detection features, a FIFO buffer, and interrupt capabilities to reduce host processor workload and overall system power consumption. Engineering Specification Device Type Ultralow power 3-axis digital MEMS accelerometer Manufacturer Analog Devices Inc. Manufacturer Part Number ADXL373BCCZ-RL7 Measurement Axes Three-axis acceleration sensing Acceleration Range Selectable full-scale ranges supporting high-g measurements up to ±400 g Output Interface SPI digital serial communication interface Resolution High-resolution digital acceleration output with integrated filtering and signal conditioning Power Supply Requirement Operates from a low-voltage DC supply suitable for portable and embedded systems Power Consumption Designed for extremely low current operation during measurement and wake-up monitoring modes Embedded Features Integrated activity detection Motion and impact sensing FIFO data buffering Interrupt generation Wake-up detection functionality Sampling and Performance Programmable output data rates and filtering options for optimized noise and bandwidth performance Operating Temperature Range Industrial temperature range suitable for harsh environmental applications Package Type LGA surface-mount package Mounting Style Surface mount technology Application Areas Impact event recording Condition monitoring Asset tracking Industrial sensing Wearable electronics Portable instrumentation Shock and vibration monitoring Always-on motion detection systems #commonpartslibrary #integratedcircuit #accelerometer #sensor

802.15.4 Bluetooth, Wi-Fi Bluetooth v5.0, ZigBee® Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C6-WROOM-1-N4 is based on the ESP32-C6 single-core RISC-V microcontroller, integrating advanced wireless standards and secure connectivity in a small module format. It is designed for next-generation IoT devices that require Wi-Fi 6 efficiency, mesh networking, and Bluetooth Low Energy support. Processor: 32-bit RISC-V single-core CPU (up to 160 MHz) Wireless Connectivity: Wi-Fi 6 (802.11ax, 2.4 GHz) Bluetooth LE 5.0 IEEE 802.15.4 (Thread / Zigbee support) Memory (N4 variant): 4 MB Flash Security: Secure boot Flash encryption Cryptographic hardware acceleration #commonpartslibrary #rf #wireless #transceiver #module #zigbee

Two 150MHz Arm Cortex-M33 cores, with floating point and DSP support, 48 GPIOs, no FLASH, 520KB of on-chip SRAM, Arm TrustZone for Cortex-M, 8KB OTP memory,SHA-256 acceleration 10×10mm, QFN80 package pico 2 #pico2 #pico #mcu #RPi #raspberry #pi #arm

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-S3-WROOM-2-N32R16V is a powerful dual-core microcontroller module that integrates wireless connectivity, large memory, and hardware acceleration for AI and signal processing tasks. It is particularly suited for applications requiring edge AI, voice recognition, and high-speed data processing, while still maintaining low power consumption. Dual-core Xtensa LX7 CPU Up to 240 MHz Includes vector instructions for AI and DSP workloads Wi-Fi 2.4 GHz (802.11 b/g/n) Bluetooth 5 (LE) N32 → 32 MB external Flash R16 → 16 MB PSRAM Built for memory-intensive applications #commonpartslibrary #transceiver #wireless #rf

Wi-Fi® 4 + Bluetooth® 5 LE System-in-Package (SiP) MCU – Highly integrated 2.4 GHz wireless System-in-Package (SiP) featuring an ESP32-S3 dual-core Xtensa® LX7 microcontroller for IoT devices, smart home products, AIoT, edge computing, industrial automation, HMI, wearable devices, and embedded wireless applications. Operates at up to 240 MHz with 8 MB embedded Flash and 2 MB embedded PSRAM, eliminating the need for external memory and reducing PCB size. Supports Wi-Fi 802.11 b/g/n and Bluetooth® 5 LE (including Long Range and 2 Mbps PHY), with up to +20 dBm transmit power and 150 Mbps Wi-Fi data rate. Features native USB 2.0 OTG, vector instructions for AI acceleration, 45 programmable GPIOs, SPI, I²C, I²S, UART, USB, RMT, LCD/Camera interface, PWM, TWAI® (CAN), ADC, touch sensing, AES-XTS, SHA, RSA, ECC, HMAC, secure boot, Flash encryption, and a true random number generator (TRNG) for secure embedded applications. Operates from a 3.0 V to 3.6 V supply, over a −40°C to +85°C temperature range, and is housed in a compact 56-pin QFN (7 × 7 mm) package. #EspressifSystems #ESP32S3PICO1N8R2 #ESP32S3 #WirelessMCU #SystemInPackage #WiFi #Bluetooth5LE #DualCore #XtensaLX7 #USBOTG #AIoT #EmbeddedSystems

MPU with Dual Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 3xEthernet (2+1 switch), 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN, Secure Boot, Cryptography, DRAM enc/dec, PKA The STM32MP257FAI3 is a high-performance microprocessor from STMicroelectronics' STM32MP2 series, integrating dual 64-bit Arm Cortex-A35 cores running at up to 1.5 GHz, a Cortex-M33 real-time core, and a Cortex-M0+ low-power management core. It is designed for advanced industrial, edge AI, machine vision, HMI, IoT gateway, and multimedia applications requiring Linux-class processing alongside deterministic real-time control. The device features AI acceleration, 3D graphics, video encoding/decoding, extensive connectivity, advanced security, and support for high-speed external memory. Key Features Dual-core 64-bit Arm Cortex-A35 CPU operating up to 1.5 GHz Arm Cortex-M33 real-time processor with TrustZone and FPU support Arm Cortex-M0+ low-power coprocessor for autonomous operation Integrated NPU (Neural Processing Unit) delivering up to 1.35 TOPS AI performance 3D GPU and hardware video encoder/decoder acceleration Supports DDR3L, DDR4, and LPDDR4 external memory up to 4 GB Multiple display interfaces including MIPI-DSI, LVDS, and parallel RGB USB 2.0 Host and USB 3.0 Dual-Role with embedded PHYs PCI Express interface with integrated 5 Gbps PHY Up to three Gigabit Ethernet interfaces with TSN and IEEE 1588 support Extensive connectivity: I2C, I3C, SPI, UART, USART, CAN FD, SDMMC, SAI, and SPDIF Hardware cryptographic accelerators including AES, SHA, RSA, ECC, PKA, and True RNG Secure boot, TrustZone security, tamper detection, and resource isolation framework Multiple low-power operating modes for energy-efficient designs Available in fine-pitch BGA packages for high-density embedded systems. #STM32MP257FAI3 #STM32MP2 #STMicroelectronics #CortexA35 #CortexM33 #EdgeAI #EmbeddedLinux #IndustrialAutomation #MachineVision #HMI #IoTGateway #MPU #PCIe #USB3 #GigabitEthernet #TrustZone #EmbeddedSystems #ArtificialIntelligence #LinuxProcessor #IndustrialIoT #CommonPartsLibrary #IntegratedCircuit #Microprocessor #STM32MP2

Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, plastic package. ► Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) ► Power consumption scales automatically with bandwidth ► User-selectable resolution ► Fixed 10-bit resolution ► Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges) ► Embedded memory management system with FIFO technology minimizes host processor load ► Single tap/double tap detection ► Activity/inactivity monitoring ► Free-fall detection ► Supply voltage range: 2.0 V to 3.6 V ► I/O voltage range: 1.7 V to VS ► SPI (3- and 4-wire) and I2C digital interfaces ► Flexible interrupt modes mappable to either interrupt pin ► Measurement ranges selectable via serial command ► Bandwidth selectable via serial command ► Wide temperature range (−40°C to +85°C) ► 10,000 g shock survival ► Pb free/RoHS compliant #CommonPartsLibrary #IntegratedCircuit #Sensor #Transducer #Motion-Sensor #Accelerometer #ADXL345

Accelerometer, Gyroscope, Magnetometer, 9 Axis Sensor I2C, SPI, UART Output The BNO085 is a high-performance 9-axis absolute orientation sensor system-in-package (SiP) that integrates a 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, and a low-power ARM Cortex-M0+ microcontroller running CEVA/Hillcrest SH-2 sensor fusion firmware. It provides accurate real-time orientation, motion tracking, and activity detection while offloading complex sensor fusion calculations from the host processor. The device is widely used in robotics, AR/VR systems, wearables, drones, IoT devices, and navigation applications. Key Features 9-axis motion sensing with integrated accelerometer, gyroscope, and magnetometer Built-in SH-2 sensor fusion engine for accurate orientation tracking ARM Cortex-M0+ processor for onboard motion processing Outputs quaternion, rotation vector, linear acceleration, gravity vector, angular velocity, and magnetic field data Advanced motion detection including tap, step, shake, and significant motion detection Activity classification and stability detection capabilities Low-latency rotation vectors optimized for AR/VR applications Supports I²C, SPI, and UART communication interfaces Configurable output data rates and timestamps Low-power operation suitable for battery-powered devices Compact 28-pin LGA package (5.2 mm × 3.8 mm) Operating temperature range: -40°C to +85°C Backward compatible with BNO080 designs while adding support for future application-specific libraries Applications Robotics and autonomous systems Virtual Reality (VR) and Augmented Reality (AR) Wearable devices and fitness trackers Drones and UAVs Head-mounted displays (HMDs) Industrial motion tracking IoT and smart devices Navigation and positioning systems #BNO085 #IMU #9AxisSensor #MotionTracking #SensorFusion #OrientationSensor #Robotics #AR #VR #IoT #Wearables #EmbeddedSystems #CEVA #HillcrestLabs #MotionDetection #Quaternion #InertialMeasurementUnit

ARM® Cortex®-M7 S32K3 Microcontroller IC 32-Bit 160MHz 4MB (4M x 8) FLASH 172-QFP (16x16) S32K344EHT1VPBST is an automotive-grade 32-bit microcontroller from NXP Semiconductors based on the Arm Cortex-M7 core architecture. The device is designed for high-performance real-time automotive body, chassis, powertrain, and domain control applications requiring functional safety, security, and advanced communication interfaces. It integrates high-speed processing capability, extensive peripheral integration, hardware security acceleration, and deterministic control functions suitable for safety-critical embedded systems. The microcontroller operates with an Arm Cortex-M7 CPU core running at high frequency with floating-point support and DSP extensions for computationally intensive applications. Integrated flash memory and SRAM provide embedded program and data storage optimized for automotive embedded control systems. The device supports hardware-assisted security features including secure boot, cryptographic acceleration, and tamper protection for secure automotive network communication and firmware integrity. The S32K344EHT1VPBST includes multiple communication peripherals supporting CAN FD, FlexCAN, LIN, SPI, UART, I2C, and Ethernet interfaces for distributed automotive networking and gateway applications. Advanced analog integration includes ADC modules, timers, PWM generators, watchdogs, and motor-control-oriented peripherals enabling precision sensing and control functionality. The device supports functional safety development aligned with ISO 26262 requirements and includes error correction, memory protection, fault monitoring, and safety management features. Power management functionality supports low-power operating modes for energy-efficient automotive electronic control units. The microcontroller is housed in a thermally enhanced LQFP package suitable for automotive operating environments with extended temperature capability and AEC-Q100 qualification for automotive reliability standards. #commonpartslibrary #integratedcircuit #microcontroller #arm #m7

Accelerometer, Gyroscope, 6 Axis Sensor I2C, I3C, SPI Output The BMI323 is a low-power, high-performance inertial measurement unit developed by Bosch Sensortec. It integrates a three-axis accelerometer and a three-axis gyroscope within a compact surface-mount package intended for motion sensing applications requiring precise movement detection, orientation tracking, vibration monitoring, and activity recognition. The device is optimized for wearable electronics, industrial sensing, robotics, navigation systems, IoT devices, and consumer electronics where low power consumption and high motion accuracy are critical. The sensor includes advanced digital signal processing, configurable motion-detection features, programmable interrupts, and integrated FIFO buffering to reduce host processor workload and improve system efficiency. Communication is supported through standard digital interfaces, enabling straightforward integration with microcontrollers and embedded platforms. The BMI323 is designed for robust environmental performance and supports flexible power management modes suitable for battery-operated systems. Engineering Specifications Device Type Six-axis inertial measurement unit consisting of: Three-axis accelerometer Three-axis gyroscope Manufacturer Bosch Sensortec Package Compact LGA surface-mount package suitable for automated assembly processes. Accelerometer Characteristics Supports multiple selectable full-scale measurement ranges for motion and acceleration sensing applications. Provides high-resolution digital output with configurable filtering and sampling parameters for low-noise operation and accurate motion analysis. Gyroscope Characteristics Integrated three-axis angular rate sensor with programmable measurement ranges and digital filtering capabilities. Designed for rotational movement tracking, stabilization, gesture recognition, and inertial navigation applications. Digital Interfaces Supports: I²C serial communication SPI serial communication I3C compatible operation Power Features Designed for ultra-low power operation with multiple configurable power modes to optimize energy consumption for portable and battery-powered devices. Embedded Features Includes integrated: FIFO data buffering Motion detection engine Activity and inactivity detection Tap and gesture detection Orientation and tilt sensing Interrupt generation Self-test functionality Output Data Handling Provides configurable output data rates, oversampling settings, and digital filtering options for balancing performance, bandwidth, and power consumption. Temperature Performance Integrated temperature sensing and compensation support for improved measurement stability across varying environmental conditions. Interrupt System Programmable interrupt outputs support event-driven system architectures and allow efficient host wake-up functionality. Operating Environment Designed for operation across industrial and consumer temperature ranges with stable sensor performance under dynamic motion conditions. Applications Suitable for: Wearable devices Smart watches Fitness trackers Industrial motion monitoring Robotics Drones Navigation systems Gaming controllers AR/VR systems IoT motion sensing Human-machine interfaces #commonpartslibrary #integratedcircuit #accelerometer #sensor

Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.5Hz ~ 625Hz 16-LGA (3x3) # LIS3DHTR ## General Description The LIS3DHTR is an ultra-low-power three-axis digital accelerometer manufactured by STMicroelectronics. It is designed to provide accurate motion, orientation, tilt, vibration, and acceleration sensing for a wide range of embedded and portable electronic applications. The device integrates advanced MEMS sensor technology, configurable measurement ranges, embedded motion-detection functions, and digital communication interfaces within a compact surface-mount package. Its low power consumption and high measurement accuracy make it suitable for wearable devices, industrial monitoring systems, asset tracking equipment, smart sensors, consumer electronics, medical devices, Internet of Things products, and battery-powered embedded systems. ## Key Features ### Sensor Architecture * Three-axis digital accelerometer * MEMS sensing technology * High-resolution motion measurement * Multi-axis acceleration detection * Real-time movement monitoring * Precision orientation sensing ### Measurement Capabilities * Motion detection functionality * Tilt sensing capability * Free-fall detection support * Vibration monitoring * Orientation recognition * Impact and shock detection * Activity and inactivity monitoring ### Electrical Characteristics * Ultra-low-power operation * Low current consumption * High measurement stability * Fast response capability * Reliable sensor performance * Optimized for battery-powered systems ### Embedded Processing Features * Integrated interrupt generation * Event detection capability * Motion recognition support * Threshold-based monitoring * Embedded motion-processing functions * Autonomous event reporting ### Communication Interfaces * SPI digital communication interface * I²C digital communication interface * Easy microcontroller integration * Reliable data transfer capability * Flexible system connectivity ### Package Characteristics * Compact surface-mount package * Low-profile design * Automated assembly compatible * High-density PCB layout support * Suitable for space-constrained applications ### Material Construction * Advanced MEMS sensor technology * High-reliability semiconductor integration * RoHS-compliant materials * Lead-free package construction * Industrial-grade manufacturing quality ### Environmental Characteristics * Long operational service life * Reliable operation under industrial conditions * Stable sensor performance over time * Resistant to mechanical stress and vibration * Suitable for continuous monitoring applications ### Application Areas * Wearable Electronics * Internet of Things Devices * Smart Sensors * Asset Tracking Systems * Industrial Monitoring Equipment * Consumer Electronics * Medical Devices * Portable Electronics * Motion Detection Systems * Vibration Monitoring Equipment * Fitness and Activity Tracking Devices * Embedded Control Systems ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade MEMS Motion Sensor Solution ## Manufacturer STMicroelectronics ## Product Family LIS3DH Three-Axis Digital Accelerometer Series #LIS3DHTR #STMicroelectronics #Accelerometer #MEMSSensor #MotionSensor #ThreeAxisAccelerometer #IoT #WearableDevices #EmbeddedSystems #IndustrialMonitoring #AssetTracking #VibrationMonitoring #ConsumerElectronics #ElectronicsEngineering #SensorTechnology

BGA-565(15.5x14.4) Microcontrollers, Quad-core ARM Cortex-A55 processor The RK3566 is a high-performance, low-power 64-bit application processor developed by Rockchip for AIoT, industrial control, smart displays, tablets, embedded systems, and single-board computers. It integrates a quad-core ARM Cortex-A55 CPU, Mali-G52 GPU, AI acceleration engine (NPU), advanced multimedia processing, and a rich set of connectivity interfaces, making it suitable for Linux- and Android-based applications requiring efficient performance and multimedia capabilities. Key Features Quad-core 64-bit ARM Cortex-A55 processor operating up to 2.0 GHz. ARM Mali-G52 2EE GPU with support for OpenGL ES 3.2, OpenCL 2.0, and Vulkan 1.1. Integrated NPU delivering up to 1 TOPS AI computing performance. Supports DDR3, DDR3L, DDR4, LPDDR3, LPDDR4, and LPDDR4X memory. Hardware video decoding up to 4K@60fps for H.264, H.265, and VP9 formats. Hardware video encoding up to 1080p@60fps for H.264 and H.265. Built-in 8MP ISP with HDR image processing support. Multiple display interfaces including HDMI 2.0, eDP, MIPI-DSI, LVDS, RGB, and E-Ink. High-speed connectivity with USB 3.0, USB 2.0, PCIe, SATA, Gigabit Ethernet, SDIO, and eMMC 5.1. Rich peripheral support including UART, SPI, I²C, PWM, ADC, I²S, PDM, and GPIO. Optimized for Android, Linux, industrial HMI, smart home, edge computing, and AIoT applications. Manufactured using a 22 nm process for improved power efficiency. #RK3566 #Rockchip #ARMCortexA55 #MaliG52 #AIoT #EmbeddedSystems #SingleBoardComputer #Linux #Android #IndustrialControl #SmartDisplay #EdgeComputing #SoC #Processor #NPU #4KVideo #IoT #Electronics #HardwareDesign #PCBDesign

ARM® Cortex®-M33 RT-600 Microcontroller IC 32-Bit Dual-Core 300MHz External Program Memory 176-VFBGA (9x9) The RT600 is a family of dual-core microcontrollers for embedded applications featuring an Arm Cortex-M33 CPU combined with a Cadence Xtensa HiFi4 advanced Audio Digital Signal Processor CPU. The Cortex-M33 includes two hardware coprocessors providing enhanced performance for an array of complex algorithms. The family offers a rich set of peripherals and very low power consumption. The Arm Cortex-M33 is a next generation core based on the ARMv8-M architecture that offers system enhancements, such as ARM TrustZone® security, single-cycle digital signal processing, and a tightly-coupled coprocessor interface, combined with low power consumption, enhanced debug features, and a high level of support block integration. The ARM Cortex-M33 CPU employs a 3-stage instruction pipe and includes an internal prefetch unit that supports speculative branching. A hardware floating-point processor is integrated into the core. On the RT600, the Cortex-M33 is augmented with two hardware coprocessors providing accelerated support for additional DSP algorithms and cryptography. The Cadence Xtensa HiFi 4 Audio DSP engine is a highly optimized audio processor designed especially for efficient execution of audio and voice codecs and pre- and post-processing modules. It supports four 32x32-bit MACs, some support for 72-bit accumulators, limited ability to support eight 32x16-bit MACs, and the ability to issue two 64-bit loads per cycle. There is a floating point unit providing up to four single-precision IEEE floating point MACs per cycle. The RT600 provides up to 4.5 MB of on-chip SRAM (plus an additional 128 KB of tightly-coupled HiFi4 ram) and several high-bandwidth interfaces to access off-chip flash. The FlexSPI flash interface supports two channels and includes an 32 KB cache and an on-the-fly decryption engine. The RT600 is designed to allow the CortexM33 to operate at frequencies of up to 300 MHz and the HiFi4 DSP to operate at frequencies of up to 600 MHz. Key Features Dual-core architecture with Arm Cortex-M33 CPU and Cadence Xtensa HiFi4 DSP Cortex-M33 operating at up to 300 MHz HiFi4 DSP operating at up to 600 MHz Up to 4.5 MB on-chip SRAM 128 KB DSP tightly coupled memory (TCM) FlexSPI interface supporting Quad/Octal SPI Flash with execute-in-place (XIP) High-speed USB 2.0 Host/Device with integrated PHY Digital microphone (DMIC) interface supporting up to 8 channels Multiple I2S, SPI, I²C, UART, SDIO, and I3C interfaces 12-bit ADC with up to 1 MSPS sampling rate Hardware cryptography acceleration (AES, SHA, RSA, ECC) Arm TrustZone® security technology Secure boot and physically unclonable function (PUF) key storage Multiple low-power operating modes for battery-powered applications Up to 147 GPIOs depending on package option 176-pin VFBGA package (9 mm × 9 mm) Typical Applications Voice-controlled smart devices Audio processing and DSP systems Smart speakers and soundbars Industrial HMI and control panels Edge AI and machine learning applications IoT gateways and connected devices Wearable and portable electronics #NXP #iMXRT685 #RT600 #CortexM33 #HiFi4DSP #Microcontroller #EmbeddedSystems #EdgeAI #VoiceRecognition #AudioProcessing #IoT #IndustrialAutomation #SecureMCU #MachineLearning #MCUDesign

Accelerometer X, Y, Z Axis ±2g, 4g, 8g 6.25Hz ~ 200Hz 12-LGA (2.2x2.3) The ADXL367BCCZ-RL7 is an ultra-low power, three-axis MEMS accelerometer developed by Analog Devices for motion sensing applications requiring extremely low energy consumption and high measurement stability. The device integrates precision acceleration sensing, embedded motion detection capabilities, and intelligent power management features within a compact surface-mount package suitable for portable and battery-operated systems. The accelerometer supports both I²C and SPI digital communication interfaces, enabling flexible integration with embedded processors, microcontrollers, and sensor hubs. Its architecture is optimized for continuous motion monitoring while maintaining exceptionally low current consumption, making it ideal for wearable electronics, asset tracking devices, medical monitoring equipment, industrial sensing systems, and Internet of Things platforms. The device incorporates embedded activity, inactivity, and wake-up detection functions that allow host processors to remain in low-power states until significant motion events occur. Integrated FIFO buffering and programmable interrupt functionality reduce processor overhead and improve overall system efficiency. The ADXL367BCCZ-RL7 is designed for robust operation across a wide operating temperature range and maintains high measurement accuracy with low noise and excellent long-term stability. The compact LGA package enables dense PCB layouts for space-constrained designs. Key Features Motion Sensing Three-axis digital accelerometer Selectable acceleration measurement ranges High-resolution motion detection Low noise sensing architecture Integrated temperature sensor Power Management Ultra-low power operation optimized for battery-powered systems Multiple operating and standby modes Autonomous motion-triggered wake-up capability Efficient duty-cycling support Digital Interfaces Supports SPI communication Supports I²C communication Programmable interrupt outputs Embedded FIFO data buffering Embedded Detection Functions Activity detection Inactivity detection Motion-triggered interrupt generation Autonomous wake-up monitoring Mechanical and Environmental Compact LGA surface-mount package High shock tolerance Wide operating temperature capability Suitable for portable and industrial environments Electrical Characteristics Supply Requirements Low-voltage digital supply operation Optimized for low-current embedded systems Stable operation across supported voltage range Sensor Performance High sensitivity stability Low offset drift Low output noise density Configurable output data rates Communication and Control Supported Interfaces SPI serial interface I²C serial interface Programmability Configurable measurement ranges Adjustable output data rates Programmable interrupt mapping FIFO configuration support Package Information Package Type LGA surface-mount package Mounting PCB surface mount compatible Suitable for automated assembly processes Typical Applications Wearable electronics Health and fitness monitoring Portable instrumentation Asset and condition monitoring Industrial sensing systems IoT sensor nodes Motion-activated devices Battery-powered embedded systems #commonpartslibrary #integratedcircuit #accelerometer #sensor

Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345-EP is an extended performance version of the ADXL345, which is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2 C digital interface. The ADXL345-EP is well suited for extended temperature range industrial and aerospace equipment. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Freefall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345-EP is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, enhanced plastic package. Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) Power consumption scales automatically with bandwidth User-selectable resolution from 10 to 13 bits 4 mg/LSB scale factor in all g ranges 32-sample FIFO minimizes host processor load Single tap, double tap, and free-fall detection Activity/inactivity monitoring Supply voltage range: 2.0 V to 3.6 V I/O voltage range: 1.7 V to VS SPI (3- and 4-wire) and I2C digital interfaces Flexible interrupt modes mappable to either interrupt pin Measurement ranges selectable via serial command Bandwidth selectable via serial command 10,000 g shock survival Pb free/RoHS compliant #commonpartslibrary #integratedcircuit #accelerometer

Accelerometer X, Y, Z Axis ±5g 1.6kHz (X,Y), 550Hz (Z) 16-LFCSP-LQ (4x4) The ADXL325 is a small, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±5 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration, resulting from motion, shock, or vibration. The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected to suit the application with a range of 0.5 Hz to 1600 Hz for X and Y axes and a range of 0.5 Hz to 550 Hz for the Z axis. The ADXL325 is available in a small, low profile, 4 mm × 4 mm × 1.45 mm, 16-lead, plastic lead frame chip scale package (LFCSP_LQ). 3-axis sensing Small, low profile package 4 mm × 4 mm × 1.45 mm LFCSP Low power: 350 μA typical Single-supply operation: 1.8 V to 3.6 V 10,000 g shock survival Excellent temperature stability Bandwidth adjustment with a single capacitor per axis RoHS/WEEE lead-free compliant #CommonPartsLibrary #Sensor #Transducer #Motion-Sensor #Accelerometer #ADXL325

Accelerometer X, Y, Z Axis ±2g, 4g 1.5kHz 14-CLCC (6x6) General Description The ADXL354BEZ is a low noise, low drift, low power, 3-axis MEMS accelerometer designed for high precision sensing applications. It provides analog voltage outputs proportional to acceleration along the X, Y, and Z axes. The device is optimized for applications requiring high resolution and long-term stability, including structural health monitoring, condition monitoring, tilt sensing, and seismic measurements. The sensor features excellent temperature stability, minimal offset drift, and selectable measurement ranges. Its very low noise density makes it suitable for vibration analysis and other sensitive measurement environments. Key Features 3-axis MEMS accelerometer with analog outputs Selectable measurement ranges of ±2 g, ±4 g, and ±8 g Ultra-low noise density of approximately 20 µg/√Hz Low offset drift across temperature Low power consumption of approximately 150 µA (typical) High resolution and measurement stability Integrated temperature sensor output Hermetically sealed package for improved environmental robustness Functional Description The ADXL354BEZ measures acceleration using capacitive MEMS sensing elements arranged along three orthogonal axes. When acceleration is applied, the internal sensing structure experiences displacement, causing a change in capacitance. This change is converted into an analog voltage output for each axis. Each axis produces a continuous-time analog signal, allowing direct interfacing with external analog-to-digital converters or signal conditioning circuits. Internal signal conditioning ensures low noise performance and stable output behavior. Electrical Characteristics (Typical) The device operates with a supply voltage ranging from 2.25 V to 3.6 V. Typical supply current during normal operation is approximately 150 µA. The noise density for all three axes is around 20 µg/√Hz. The bandwidth is user selectable and can reach up to approximately 1.5 kHz. The output signals are analog and ratiometric with respect to the supply voltage. Mechanical Characteristics The ADXL354BEZ is housed in a compact leadless chip carrier (LCC) package with approximate dimensions of 5 mm by 5 mm. It is designed for surface-mount installation. The sensing axes are aligned orthogonally to provide accurate three-dimensional acceleration measurement. Performance Characteristics High resolution suitable for precision sensing applications Low temperature coefficient and minimal drift over time High linearity across the full-scale measurement range Excellent long-term stability Low cross-axis sensitivity for improved accuracy Pin Configuration Overview The device includes power supply and ground connections, along with individual analog outputs for each axis labeled XOUT, YOUT, and ZOUT. A self-test pin is provided for functionality verification, and a temperature output pin allows monitoring of internal device temperature. Operating Conditions The device is designed to operate over a temperature range from −40°C to +125°C. Storage temperature ranges from −65°C to +150°C. The recommended supply voltage range is 2.25 V to 3.6 V. Applications Structural health monitoring Industrial condition monitoring Seismic and geophysical sensing Tilt and inclination measurement Platform stabilization systems Vibration analysis Advantages Extremely low noise performance for high sensitivity applications Stable operation across wide temperature ranges Simple analog interface without the need for digital communication protocols Robust packaging suitable for harsh environments Compliance and Reliability The ADXL354BEZ is RoHS compliant and designed for industrial-grade applications. It offers high reliability and long-term performance stability in demanding operating conditions. #commonpartslibrary #sensor #accelerometer

Accelerometer X, Y, Z Axis ±3g 1.6kHz (X,Y), 550Hz (Z) 16-LFCSP-LQ (4x4) The ADXL335BCPZ-RL7 is a low-power, complete 3-axis accelerometer with analog voltage outputs proportional to acceleration. It measures acceleration along the X, Y, and Z axes with a full-scale range of ±3 g. This device integrates a micro-electromechanical system (MEMS) sensor with signal conditioning circuitry, enabling direct analog output without the need for external amplification. The RL7 suffix indicates tape-and-reel packaging for automated assembly. The ADXL335BCPZ-RL7 is designed for compact, battery-powered, and motion-sensitive applications where low power consumption and ease of integration are critical. Functional Overview The accelerometer operates using a capacitive sensing structure. Acceleration causes displacement of an internal mass, changing capacitance, which is converted into a proportional analog voltage output. Each axis operates independently and provides a continuous analog signal that can be read by a microcontroller’s ADC. External capacitors allow the user to configure bandwidth per axis, enabling optimization for noise or response speed. Electrical Characteristics Supply Voltage Range: 1.8 V to 3.6 V Supply Current: Typical: 350 µA Measurement Range: ±3 g Sensitivity (Typical): 300 mV/g Zero-g Bias Level: Approximately VCC / 2 Bandwidth: Adjustable via external capacitors Typical limits: X, Y axes: up to 1600 Hz Z axis: up to 550 Hz Output Characteristics Output Type: Analog (ratiometric to supply voltage) Axes: Three independent outputs (XOUT, YOUT, ZOUT) Output Impedance: Approximately 32 kΩ Noise Density: X/Y axes: ~150 µg/√Hz Z axis: ~300 µg/√Hz Mechanical Characteristics Package Type: 16-lead LFCSP Package Dimensions: Approximately 4 mm × 4 mm × 1.45 mm Mounting: Surface mount Packaging Option: Tape and reel (RL7) Environmental Specifications Operating Temperature Range: −40°C to +85°C Storage Temperature Range: −65°C to +150°C Shock Survival: Up to 10,000 g Interface Requirements External Components: Capacitors required for bandwidth selection (one per axis) Interface Type: Analog voltage outputs compatible with ADC inputs Pin Description (Summary) ST: Self-test input XOUT: X-axis analog output YOUT: Y-axis analog output ZOUT: Z-axis analog output VCC: Power supply GND: Ground NC: No connection / reserved Applications Tilt and orientation sensing Motion and vibration detection Portable electronics Gaming controllers Wearable devices Industrial monitoring systems Key Features Three-axis acceleration measurement Low power consumption Analog output for simple interfacing Compact MEMS package Adjustable bandwidth Wide temperature operating range Tape-and-reel packaging for automated manufacturing #commonpartslibrary #integratedcircuit #sensor #accelerometer