Part Review and Datasheet Verification

A

adrian95

Update the pin types/descriptions, normalize safe pin names, then run part review checks again.

flux

I’ll update the BNO085 terminal metadata from the datasheet, safely normalize the trailing-underscore pin names, then rerun the part review checks.

flux

Current terminals are still unspecified; I’m applying the datasheet-derived metadata now.

flux

Metadata and the three safe terminal names are updated; I’m running the part review checks now.

flux

Updated all 28 terminals with datasheet-derived Pin Type and short Pin Description values, and normalized ENV_SCL_, SA0/H_MOSI_, and H_SDA/H_MISO/TX_ by removing trailing underscores.
Open items:
  • Part review checks were queried after the update, but no component review check entries were returned for this part project.
  • I verified directly in the schematic that the updated pin metadata and normalized names are present.
Suggested next steps:
  1. If you want, I can also update the earlier bno085-part-review document with the completed fixes.
  2. Run a visual footprint/land-pattern check against the datasheet package drawing.
Update docs and verify
Update review document
Check footprint geometry
Run all checks
Improve part properties
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Pin Description
Pin Orientation
Terminal Order
RESV_NC_1
1
Not Connected
Terminal
Reserved no connect
GND_1
2
Ground
Terminal
Ground reference
Bottom
VDD
3
Power In
Terminal
Sensor supply input
BOOTN
4
Input
Terminal
Bootloader mode select
PS1
5
Input
Terminal
Protocol select one
PS0/WAKE
6
Input
Terminal
Protocol select wake
RESV_NC_2
7
Not Connected
Terminal
Reserved no connect
RESV_NC_3
8
Not Connected
Terminal
Reserved no connect
CAP
9
Passive
Terminal
External bypass capacitor
CLKSEL0
10
Input
Terminal
Clock source select
NRST
11
Input
Terminal
Active-low reset
RESV_NC_4
12
Not Connected
Terminal
Reserved no connect
RESV_NC_5
13
Not Connected
Terminal
Reserved no connect
H_INTN
14
Output
Terminal
Host interrupt output
ENV_SCL
15
Bi-Directional
Terminal
Environmental I2C clock
ENV_SDA
16
Bi-Directional
Terminal
Environmental I2C data
SA0/H_MOSI
17
Input
Terminal
Address bit SPI input
H_CSN
18
Input
Terminal
SPI chip select
H_SCL/SCK/RX
19
Bi-Directional
Terminal
Host clock UART RX
H_SDA/H_MISO/TX
20
Bi-Directional
Terminal
Host data UART TX
RESV_NC_6
21
Not Connected
Terminal
Reserved no connect
RESV_NC_7
22
Not Connected
Terminal
Reserved no connect
RESV_NC_8
23
Not Connected
Terminal
Reserved no connect

BNO085