I rechecked the current RP2350B part: the reported issue appears incorrect. The QFN-80 numbering wraps around the package:

So the existing GPIO terminal-to-pad mapping is internally consistent; FLUX-14940 likely resulted from assuming GPIO0 starts at physical pin 1. A definitive check against the latest Raspberry Pi RP2350 datasheet—and correction of the Linear issue—requires live research in Agent mode.

I’ll verify the full QFN-80 pin sequence against Raspberry Pi’s datasheet, compare it with the current part, and identify whether the issue report or library mapping is wrong.

The cross-check is complete: the current Flux terminal map matches Raspberry Pi’s QFN-80 pinout for GPIO0–GPIO15. I found no GPIO pad-map correction to apply.

The FLUX-14940 report is incorrect; the current RP2350B library mapping is correct:

QFN-80 numbering wraps around the package, which caused the mistaken interpretation. No part changes should be made; FLUX-14940 should be closed as invalid.