Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, locate and attach the official datasheet if needed, then verify the symbol, footprint, and pin descriptions against it and report any mismatches.
Audit complete. The official Nordic datasheet URL was already set, all 35 ball mappings are correct, and the package outline/pitch match; key issues are missing pin descriptions/metadata and an unverified, unusually large solder-mask opening around the 0.269 mm pads.
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
General Purpose Thick Film Standard Power
and High-Power Chip Resistor
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film
Features:
- RMCF – standard power ratings
- RMCP – high power ratings
- Nickel barrier terminations standard
- Power derating from 100% at 70ºC to zero at +155ºC
- RoHS compliant, REACH compliant, and halogen free
- AEC-Q200 compliant
Power Management IC (PMIC) integrating battery charging, power regulation, fuel gauging, and system management for single-cell Li-ion, Li-poly, and LiFePO₄ batteries. It features a 4–100 mA linear battery charger, two 200 mA buck regulators, two configurable 50 mA LDOs or 100 mA load switches, USB-C compatible input (4.0–5.5 V) with 22 V overvoltage protection, and an I²C-compatible TWI interface with watchdog, hard reset, power-loss warning, GPIOs, and LED drivers.