The ATtiny45/85 USB Phone Charge Guard regulates charging by monitoring voltage, current, power, and energy, protecting Li-ion batteries.

A buck boost converter that can be powered from a Li-Ion battery and output 3.3V @ 500mA. Powered by the TPS63051YFFR and in the same package as a standard Adafruit buck converter. Expect to squeeze around 5-10% SoC from a typical Li-Ion battery. Input Voltage Range: 2.5V to 5.5V Assembled at pcbway.com

This project is a reference design based on the BQ25895, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ25895 #ReferenceDesign #charger #BatteryManagemen #referenceDesign #bms #texas-instruments #template #reference-design #polygon

The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate of 500mA. It is designed to charge single-cell Li-Ion or Li-Polymer batteries.

The TP4056 1A Li-ion Lithium Battery Charging Module with Current Protection – Mini USB is a compact device designed to charge individual lithium ion (Li-Ion) cells that lack their own protective circuit, such as 16550s, with a single cell capacity of 3.7V and 1 Ah or higher. This battery charging module employs the TP4056 charger IC and DW01 battery protection IC to provide a charge current of 1A, which will cease upon completion of the charging process. https://robocraze.com/products/tp4056-lithium-battery-charging-board #PCB #TP4056 #battery

Cost-Effective USB-C 2S Li-Ion Charger with Integrated 1W LED Flashlight - Fully Discrete, Generic Components, Minimalist Design

A Buck converter that can be power by Li-ion Battery and output 3.3 volt and 500mA Power by the TPS63051YFFR and the same package as a In the same as a Package as a standard dafruit buck converter. input Voltage Range : 3.3 v to 5.5 v

A buck boost converter that can be powered from a Li-Ion battery and output 3.3V @ 500mA. Powered by the TPS63051YFFR and in the same package as a standard adafruit buck converter . Input Voltage range : 2.5V to 5.5V

This project is a reference design based on the BQ25606, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ25606 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #texas-instruments #template #reference-design #polygon

TinyCharger is an ATtiny25/45/85-based, single-cell Li-ion battery charger with selectable charging current limit (100mA - 1000mA) and an OLED display for monitoring.

FLORA has a small but easy to use onboard reset button to reboot the system. The power supply is designed to be flexible and easy to use. There is an onboard polarized 2 JST battery connector with protection schottky diode for use with external battery packs from 3.5v to 16v DC in. Can be used with LiIon/LiPoly, LiFe, alkaline or rechargeable NiMh/NiCad batteries of any size. The FLORA does not have a LiPo charger included by design, this allows safe use with multiple battery types and reduces risk of fire as it is not recommended to charge these batteries on fabric.

PowerBoost 500C is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert the battery output to 5.2V DC for running your 5V projects.

Schematic of a Li-ion battery charger; IC represents TC3582DA

High-efficiency 3.7V Li-Ion boost converter for the Tremendous Azure Robot Vacuum auxiliary power rail.

Low-power ESP32 audio/radio device with SA828 walkie-talkie module, MAX9814 microphone, PAM8403-driven GD14 bone-conduction output, and single-cell Li-ion charging, power-path, 3.3 V regulation, and battery monitoring.

Welcome to your new project. Imagine what you can build here.

A solar charging PCB for a 13S 5P lithium-ion battery pack. Charging design parameters: - Input voltage range: 40V to 56V - Battery voltage range: 39V to 54.6V - Input current limit: 12 A - Fast-charge current limit: 10 A - Switching frequency: 350kHz

A buck boost converter that can be powered from a Li-ion battery and ouput 3.3V @500mA. Powered by the TPS63051YFFR and in the same package as a standard ADAFRUIT buck converter. Input Voltage Range: 2.5 to 5.5 Voltage.

Tiny USB type-C charger for Li-ion single cell charger based on TP4056 IC. Rprog setting output current to 900mA. VIN and BAT connector are block terminal connectors. #project #typec #charger #TP4056

ESP8684H4 based thermostat module which will control the heater. The module will have 18650 Li-Ion battery cell with 3.7V nominal voltage. The module also has a switch-mode buck NVDC power path which can simultaneously charge the battery and provide power to the system. The system voltage is 3.3V. Input voltage is 5V from USB-C. The system also contains a temperature, humidity and pressure sensor. The Wi-Fi and Bluetooth antenna implemented by PCB tracks.

A buck boost converter that can be powered from a Li-Ion battery and output 3.3V @ 500mA. Powered by the TPS63051YFFR and in the same package as a standard Adafruit buck converter. Expect to squeeze around 5-10% SoC from a typical Li-Ion battery. Input Voltage Range: 2.5V to 5.5V

Reference design for Li-ion single cell charger based on TP4056 IC. Rprog setting output current to 900mA. VIN and BAT connector are block terminal connectors. #project #Template #referenceDesign #charger #TP4056 #referenceDesign #batterycharger #template #bms #reference-design #polygon

This module is a minimalist Arduino Watch design. Consisting of a Microchip ATTINY85-20SU microcontroller, an OLED display for visual output, two user buttons for interface, and a Li-ion Battery for power. The schematic also includes graphic user interface with ISP for programming and minimal passive components for functionality. #wearableDevices #arduino #attiny85

This module is a minimalist Arduino Watch design. Consisting of a Microchip ATTINY85-20SU microcontroller, an OLED display for visual output, two user buttons for interface, and a Li-ion Battery for power. The schematic also includes graphic user interface with ISP for programming and minimal passive components for functionality. #project #Template #projectTemplate #reusable #module #simple-embedded #microchip #arduino #sublayout

3.3V Li-ion MagTek Stripe Reader Interface with ATtiny85, AT24C256, and MCP1700 (Edge-mount Pads, 25x12.5 mm, GND Pour, ERC/DRC OK)