2A Switch-Mode Li-Ion Charger with NVDC Power Path Management #ultralibrarian

2A Switch-Mode Li-Ion Charger with NVDC Power Path Management #ultralibrarian

2A Switch-Mode Li-Ion Charger with NVDC Power Path Management #ultralibrarian

Charger IC Lithium Ion/Polymer 29-VQFN-HR (4x4) The BQ25792 is a switch-mode synchronous buck-boost charger with full power-path management. It can automatically regulate power flow between the input source, system load, and battery. It supports a wide input range and is designed for USB Type-C™ / USB Power Delivery (USB-PD) systems, enabling both charging and OTG (power output from battery) operation. ⭐ Key Features ⚡ High-performance charging Up to 5 A charge current Supports 1S to 4S battery packs High efficiency (up to ~96% under typical conditions) Programmable switching frequency: 750 kHz or 1.5 MHz 🔋 Wide input support Input voltage range: 3.6 V to 24 V Absolute max rating up to 30 V Supports USB adapters and barrel jack sources Detects USB charging standards (BC1.2, DCP, CDP, HVDCP, etc.) 🔄 Buck-boost power conversion Seamless buck, boost, and buck-boost operation Maintains stable system voltage even when battery is low or input varies 🔌 USB-PD / OTG support USB Power Delivery (PD 3.0 compatible) Supports OTG output (battery powers USB port) OTG voltage range: 2.8 V to 22 V 🧠 Intelligent power management NVDC power path management (system can run without battery) Dual-input power mux controller (select between two power sources) Battery supplement mode (prevents input overload) 📊 Monitoring & control Integrated 16-bit ADC for voltage, current, temperature monitoring Fully I²C configurable Autonomous or host-controlled operation 🛡️ Protection & safety Input and battery over-voltage/over-current protection Thermal regulation and shutdown Charging safety timer MOSFET protection (internal switching FETs included) 📦 Package 29-pin VQFN (4 mm × 4 mm) package Industrial temperature range: -40°C to 85°C #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-charger

The BQ24650, developed by Texas Instruments, is a highly integrated switch-mode battery charge controller designed to offer efficient charging solutions for solar power applications and portable instruments. This component stands out for its capability to handle a wide input voltage range from 5 V to 28 V, making it suitable for various solar panel configurations. It features Maximum Power Point Tracking (MPPT) to ensure optimal energy extraction from solar panels by adjusting the input voltage to match the panel's maximum power output. The BQ24650 supports charging for multiple chemistries including Li-Ion/Polymer, LiFePO4, and lead acid batteries, with programmable charge current and voltage regulation to accommodate specific battery requirements. Its synchronous buck controller operates at 600 kHz, enabling compact circuit design due to smaller external components. Additionally, the device includes a host of protection features such as input overvoltage protection, thermal shutdown, and battery temperature sensing for safe operation. The BQ24650 is packaged in a small 3.5 mm x 3.5 mm, 16-pin QFN, offering a compact solution for space-constrained applications. Its diverse range of applications includes solar-powered systems, remote monitoring stations, portable handheld instruments, and 12-V to 24-V automotive systems, highlighting its versatility and adaptability to various power management tasks.

Charger IC Multi-Chemistry 36-VQFN (5x6) The BQ25750RRVR is a highly integrated switch-mode battery charge controller and power-path management device designed for single-cell to multi-cell lithium-ion and lithium-polymer battery-powered systems. The device supports bidirectional power conversion, enabling both battery charging and system power delivery through USB Type-C and other DC power sources. It integrates high-efficiency buck-boost charging architecture to maintain optimal charging performance across a wide input voltage range. The device is intended for portable electronics, industrial handheld equipment, USB Power Delivery applications, embedded systems, and battery-powered computing platforms requiring advanced power management and flexible charging capability. Integrated power-path management allows simultaneous system operation and battery charging while maintaining battery protection and system stability. The BQ25750RRVR supports programmable charging parameters through an I2C interface, including charge voltage, charge current, input current limit, and system power regulation. The device includes comprehensive protection functions such as overvoltage protection, overcurrent protection, thermal regulation, battery temperature monitoring, and fault reporting. High switching frequency operation enables reduced external component size and compact PCB implementation. Features Integrated synchronous buck-boost battery charger Supports USB Power Delivery and wide DC input sources Bidirectional power conversion capability I2C programmable charging and system parameters Integrated power-path management High-efficiency charging operation Supports multi-cell lithium-ion and lithium-polymer batteries Programmable input current and charge current limits Dynamic power management and system voltage regulation Integrated ADC monitoring for voltage, current, and temperature Battery supplement mode during adapter removal OTG boost mode support Thermal regulation and thermal shutdown protection Input overvoltage and overcurrent protection Battery overvoltage protection Safety timer and watchdog timer support NTC thermistor interface for battery temperature monitoring Interrupt and fault status reporting Compact WQFN package suitable for space-constrained designs Electrical Characteristics Wide input operating voltage range Programmable battery charge voltage High charge current capability Integrated low RDS(on) MOSFET drivers High switching frequency operation High conversion efficiency across operating range Low standby and shutdown current consumption Accurate input and charge current regulation Integrated analog-to-digital converter telemetry Interface and Control I2C serial communication interface Programmable charging profiles Configurable protection thresholds Status and interrupt reporting ADC telemetry reporting Enable and control pins for system integration Protection Features Input overvoltage protection Input overcurrent protection Battery overvoltage protection Thermal shutdown protection Thermal regulation control Short-circuit protection Watchdog timer protection Safety charging timer Battery temperature qualification support Package Information Package Type: WQFN Package Suffix: RRV Compact thermally enhanced package Surface-mount device Suitable for automated PCB assembly processes Applications USB Type-C charging systems Portable computers and tablets Industrial handheld devices Power banks and battery packs Embedded battery-powered systems Portable instrumentation Consumer electronics Smart battery charging platforms #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

1A, High Voltage (75V) Switch-Mode Regulator, Adjustable Output Voltage, SOIC-8 High-Voltage Switch-mode Regulator Flyback SEPIC Boost SOIC*3.9x4.9mm*P1.27mm*

Charger IC Lithium Ion/Polymer 29-VQFN-HR (4x4) The BQ25792 is a fully integrated switch-mode buck-boost charger for 1-4 cell Li-ion batteries and Li-polymer batteries. The integration includes 4 switching MOSFETs (Q1, Q2, Q3, Q4), input and charging current sensing circuits, the battery FET (QBAT) and all the loop compensation of the buck-boost converter. It uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. When system power exceeds the input source rating, battery supplement mode supports the system without overloading the input source. BQ25792 supports the full input and output (OTG) voltage ranges for USB Type-C™ and USB power delivery (USB-PD) applications. • High power density, high integration buck-boost charger for 1-4 cell batteries supporting any USB PD 3.0 profile – Integrates four switching MOSFETs, BATFET – Integrates input and charging current sensing • Highly efficient – 750-kHz or 1.5-MHz switching frequencies – 5-A charging current with 10-mA resolution • 96.5% efficient: 16-V battery at 3A from 20V • Supports a wide range of input sources – 3.6-V to 24-V wide input operating voltage range with 30-V absolute maximum rating – Maximum power tracking with input voltage dynamic power management (VINDPM) up to 22 V and input current dynamic power management (IINDPM) up to 3.3 A – Detects USB BC1.2, SDP, CDP, DCP, HVDCP and non-standard adapters • Dual-input power mux controller (optional) for source selection • Narrow voltage DC (NVDC) power path management • Powers USB port from battery (USB OTG) – 2.8-V to 22-V OTG output voltage with 10-mV resolution to support USB-PD PPS – OTG output current regulation up to 3.32 A with 40-mA resolution • Flexible autonomous and I2C mode for optimal system performance • Integrated 16-bit ADC for voltage, current, and temperature monitoring • Low battery quiescent current – 21 µA for battery only operation – 600 nA in Charger Shutdown Mode • High accuracy – +0.65% to -0.85% charge voltage regulation for 2S-4S batteries – ±5% charge current regulation – ±5% input current regulation • Safety – Thermal regulation and thermal shutdown – Input/battery OVP and OCP – Converter MOSFETs OCP – Charging safety timer • Package – 29-Pin 4 mm × 4 mm QFN #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-Charger

Charger IC Lithium Ion/Polymer 18-WQFN-HR (3x2.5) The BQ25620RYKR is a highly integrated standalone switch-mode battery charge management and system power-path management device designed for single-cell lithium-ion and lithium-polymer batteries. The device integrates a synchronous buck charger, power-path management, input current optimization, and system regulation functions into a compact package suitable for portable and battery-powered embedded systems. It supports USB and adapter power sources with high-efficiency charging operation and dynamic power management for optimized thermal and power performance. The device includes integrated MOSFETs, charge termination, safety timers, input overvoltage protection, thermal regulation, and battery temperature monitoring. It supports I²C communication for programmable charging parameters, system monitoring, and fault reporting. The integrated narrow-voltage DC architecture improves efficiency while reducing external component count and PCB area. Engineering Specification Manufacturer: Texas Instruments Device Type: Single-Cell Li-Ion/Li-Polymer Switching Battery Charger with Power-Path Management Battery Chemistry Support: Lithium-Ion and Lithium-Polymer Charging Topology: Synchronous Buck Converter Input Supply Support: USB Power and External Adapter Sources Input Voltage Operating Range: Wide Input Voltage Support with Input Overvoltage Protection Charge Current Capability: High Current Fast Charging Support System Power Path: Integrated Dynamic Power-Path Management Communication Interface: I²C Serial Interface Integrated MOSFETs: High-Side and Low-Side Power MOSFETs Included Charging Functions: Preconditioning Charge Fast Charge Charge Termination Recharge Function Safety Timer Control Protection Features: Input Overvoltage Protection Battery Overvoltage Protection Thermal Shutdown Thermal Regulation Charge Safety Timer Input Current Limiting Short-Circuit Protection Battery Monitoring Features: Battery Temperature Monitoring via NTC Charge Status Reporting Fault Status Reporting System Voltage Regulation Power Management Features: Narrow Voltage DC Regulation Dynamic Input Power Management Input Current Optimization Automatic Power Source Detection Package Type: WQFN Package Package Variant: RYK Mounting Type: Surface Mount Application Areas: Portable Electronics Embedded Battery-Powered Systems Handheld Devices USB-Powered Equipment Industrial Portable Devices IoT Systems Consumer Electronics #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

Charger IC Lithium Ion/Polymer 18-WQFN-HR (3x2.5) The BQ25622RYKR is a highly integrated standalone switch-mode battery charge management and system power-path management device designed for single-cell lithium-ion and lithium-polymer batteries. The device integrates a high-efficiency synchronous buck charger, system power-path control, input current management, and battery protection functions into a compact solution optimized for portable and embedded applications. The device supports USB and external adapter power sources while providing programmable charging parameters through an I²C interface. Integrated power MOSFETs and advanced power management features reduce external component count and improve overall system efficiency. The charger incorporates dynamic power management, thermal regulation, battery temperature monitoring, and multiple safety protections to ensure reliable operation under varying load and environmental conditions. The BQ25622 family is designed for compact battery-powered systems requiring efficient charging, intelligent power-path control, and low system power consumption. Engineering Specification Manufacturer: Texas Instruments Device Type: Single-Cell Li-Ion/Li-Polymer Switching Battery Charger with Integrated Power-Path Management Battery Chemistry Support: Lithium-Ion and Lithium-Polymer Charging Topology: Synchronous Buck Switching Charger Input Power Sources: USB Input and External DC Adapter Support Charge Current Capability: Programmable Fast Charge Current Support Communication Interface: I²C Serial Communication Interface Integrated Power Devices: Internal High-Side and Low-Side MOSFETs Charging Features: Precharge Mode Fast Charge Mode Charge Termination Automatic Recharge Programmable Charge Parameters Safety Timer Control Power Management Features: Dynamic Power-Path Management Input Current Optimization Narrow Voltage DC Regulation Input Voltage Regulation System Voltage Regulation Monitoring and Reporting Features: Charge Status Monitoring Fault Status Reporting Battery Temperature Monitoring through NTC Interface Input Source Detection Protection Features: Input Overvoltage Protection Battery Overvoltage Protection Thermal Shutdown Protection Thermal Regulation Input Current Limiting Short-Circuit Protection Safety Timer Protection Package Type: WQFN Package Package Variant: RYK Mounting Type: Surface Mount Typical Applications: Portable Consumer Electronics Embedded Battery-Powered Devices IoT Systems Handheld Industrial Equipment USB-Powered Systems Wearable Electronics Portable Medical Devices #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

BQ25798RQMR QFN-29_L4.0-W4.0-P0.40-TL-BQ25792RQMR LCSC Part Number: C2876593 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments BQ25798 fully integrated switch-mode buck-boost battery charger for 1-4 cell Li-ion and Li-polymer batteries, supports USB PD 3.0 power profile, integrates four switching MOSFETs, BATFET, input and charging current sensing, 3.6V to 24V input operating range with 30V absolute maximum, 750kHz or 1.5MHz switching frequency, up to 5A charging current with 10mA resolution, up to 96.5% efficiency, supports MPPT for photovoltaic charging, USB BC1.2/HVDCP/non-standard adapter detection, NVDC power path management, USB OTG output from 2.8V to 22V up to 3.32A, I2C control, integrated 16-bit ADC, low quiescent current, thermal regulation, OVP/OCP protection, safety timer, 29-pin 4x4mm QFN package. Search Keywords: BQ25798, Texas Instruments BQ25798, TI BQ25798, BQ25798 battery charger, BQ25798 buck boost charger, BQ25798 Li-ion charger, BQ25798 Li-polymer charger, 1-4 cell battery charger, USB PD 3.0 battery charger, buck boost charger IC, NVDC power path charger, MPPT battery charger IC, photovoltaic battery charger, USB OTG charger IC, 5A charging current charger, I2C battery charger, BQ25798 QFN-29, 4x4mm QFN charger, BQ25798 datasheet Hashtags: #BQ25798 #TexasInstrumentsBQ25798 #TIBatteryCharger #BatteryChargerIC #BuckBoostCharger #LiIonCharger #LiPolymerCharger #1to4CellCharger #USBPDCharger #USBPD30 #NVDCCharger #PowerPathManagement #MPPTCharger #PhotovoltaicCharger #USBOTGCharger #5ACharger #I2CCharger #IntegratedADC #QFN29 #4x4mmQFN

The Trenz Electronic TE0745-03-71I31-AK are industrial-grade SoC modules integrating a AMD/Xilinx Zynq™ 7030, 1 GByte DDR3L SDRAM, 64 MByte QSPI Flash memory for configuration and operation and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips. This module is identical with TE0745-03-71I31-A except the mounted heat spreader. All this on a tiny footprint of 5.2 x 7.6 cm at the most competitive price. These high-density integrated modules are smaller than a credit card and available in several variants. All parts are at least industrial temperature range of -40°C to +85°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options. #Module #part

I²C Controlled Single Cell Fast Charger with MaxCharge™ Technology for High Input Voltage and Adjustable Voltage 3.1A Boost Operation The bq25895M is a highly-integrated 5-A switchmode battery charge management and system power path management device for single cell Li-Ion and Lipolymer battery. The devices support high input voltage fast charging. The low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. The I 2C Serial interface with charging and system settings makes the device a truly flexible solution. • High Efficiency 1.5-MHz Switch Mode Buck Charge – 93% Charge Efficiency at 2 A and 91% Charge Efficiency at 3 A Charge Current – Optimize for High Voltage Input (9 V / 12 V) – Low Power PFM mode for Light Load Operations • Boost Mode Operation with Adjustable Output from 4.5 V to 5.5 V – Selectable 500-KHz / 1.5-MHz Boost Converter with up-to 3.1 A Output – 93% Boost Efficiency at 5 V at 1 A Output – Support down-to 2.5V Battery – Support PWM only or PFM/PWM control for Light Load Efficiency • Integrated Control to Switch Between Charge and Boost Mode • Single Input to Support USB Input and Adjustable High Voltage Adapters – Support 3.9-V to 14-V Input Voltage Range – Input Current Limit (100 mA to 3.25 A with 50- mA resolution) to Support USB2.0, USB3.0 standard and High Voltage Adapters – Maximum Power Tracking by Input Voltage Limit up-to 14V for Wide Range of Adapters – Auto Detect USB SDP, CDP, DCP, and Nonstandard Adapters • Input Current Optimizer (ICO) to Maximize Input Power without Overloading Adapters • Resistance Compensation (IRCOMP) from Charger Output to Cell Terminal • Highest Battery Discharge Efficiency with 11-mΩ Battery Discharge MOSFET up to 9 A • Integrated ADC for System Monitor (Voltage, Temperature, Charge Current) • BATFET Control to Support Ship Mode, Wake Up, and Full System Reset • Flexible Autonomous and I 2C Mode for Optimal System Performance • High Integration includes all MOSFETs, Current Sensing and Loop Compensation • 12-µA Low Battery Leakage Current to Support Ship Mode • High Accuracy – ±0.5% Charge Voltage Regulation – ±5% Charge Current Regulation – ±7.5% Input Current Regulation #CommonPartsLibrary #IntegratedCircuit #PowerManagement

IGBT 460 V 20 A 107 W Surface Mount LPDS #CommonPartsLibrary #Transistor #IGBT The RGPR20NS43HRTL specification defines the engineering requirements for an ultrafast recovery power rectifier designed for high-efficiency power conversion and switching applications. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure reliable rectification performance, low switching losses, and long-term operational stability in power electronic systems. The device is intended for use in switch-mode power supplies, power factor correction circuits, motor drives, industrial power equipment, and other high-frequency power conversion applications. It provides efficient current rectification with fast reverse recovery characteristics, enabling improved system efficiency and reduced electromagnetic interference in demanding electrical environments. Engineering Requirements The rectifier shall be manufactured using qualified semiconductor fabrication processes and high-quality materials to ensure consistent electrical performance, thermal stability, and long service life. The device shall maintain reliable operation under specified voltage, current, and temperature conditions without degradation of functional performance. Electrical characteristics shall provide low forward voltage drop, fast reverse recovery time, and high surge current capability to support efficient high-frequency switching applications. The device shall maintain stable electrical behavior under repetitive switching cycles and transient operating conditions. Thermal performance shall support effective heat dissipation through the package structure and recommended mounting configuration. The component shall operate within specified junction temperature limits while maintaining electrical integrity and long-term reliability under continuous or intermittent load conditions. Mechanical construction shall be suitable for standard surface-mount or through-hole assembly, depending on the package configuration, and shall withstand soldering, handling, vibration, and thermal cycling without mechanical degradation. Workmanship shall be free from defects including contamination, cracks, bond failures, corrosion, or structural inconsistencies that could adversely affect electrical or mechanical performance. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with all applicable engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process. Documentation Supporting documentation shall include engineering drawings, electrical performance data, thermal characterization reports, qualification records, inspection reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before implementation to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #PowerRectifier #UltrafastRecoveryDiode #PowerElectronics #SwitchModePowerSupply #IndustrialElectronics #Semiconductor #ThermalManagement #QualityAssurance #EngineeringDocumentation

Film Capacitors 1000pF 63 Volts 5% WIMA FKP1 1nF 1600V WIMA FKP 1 Series are high-performance polypropylene (PP) film capacitors designed for extremely high pulse, high-current, and high-frequency applications. These capacitors use metal foil electrodes combined with metallized internal connections, providing very low dissipation factor, excellent self-healing characteristics, low dielectric absorption, and outstanding pulse-handling capability. Available in capacitance values from 100pF to 4.7µF and rated voltages from 400VDC up to 6000VDC, the FKP1 series is optimized for demanding power electronics environments. Typical applications include switch-mode power supplies (SMPS), resonant converters, induction heating, motor drives, inverter systems, TV deflection circuits, pulse generators, electronic ballasts, and industrial high-voltage equipment. The series is AEC-Q200 qualified and compliant with RoHS requirements. Search Keywords: WIMA FKP1, FKP 1, polypropylene film capacitor, pulse capacitor, high pulse capacitor, pulse discharge capacitor, foil capacitor, metallized film capacitor, high frequency capacitor, power electronics capacitor, resonant capacitor, snubber capacitor, inverter capacitor, SMPS capacitor, motor drive capacitor, induction heating capacitor, high voltage film capacitor, AEC-Q200 capacitor, DC link capacitor, low ESR film capacitor, low dissipation capacitor Hashtags: #WIMA #FKP1 #FilmCapacitor #PolypropyleneCapacitor #PulseCapacitor #HighVoltageCapacitor #PowerElectronics #SMPS #ResonantConverter #MotorDrive #InverterDesign #SnubberCapacitor #IndustrialElectronics #AECQ200 #HighFrequencyDesign #ElectronicComponents #PCBDesign #HardwareDesign #PowerSupplyDesign #WIMACapacitor

High voltage half-bridge gate driver for GaN transistors Features • dV/dt immunity ±200 V/ns • Driver current capability: – 1.3/2.4 A source/sink typ @ 25 °C, 6 V – 5.5/6 A source/sink typ @ 25 °C, 15 V • Separated turn on and turn off gate driver pins • 45 ns propagation delay with tight matching • 3.3 V, 5 V TTL/CMOS inputs with hysteresis • Interlocking function • UVLO on low-side and high-side sections • Dedicated pin for shut down functionality • Over temperature protection Applications • High-voltage PFC, DC-DC and DC-AC converters • Switch-mode power supplies • UPS systems • Solar power • Motor driver for home appliances, factory automation and industrial drives. #CommonPartsLibrary #IntegratedCircuit #powermanagement

39 mH @ 10 kHz 2 Line Common Mode Choke Through Hole 300mA DCR The 744821039 is a common mode choke (CMC) designed for power line filtering. It is used to suppress electromagnetic interference (EMI), particularly common-mode noise in AC/DC power circuits and switching power supplies. Type: Common mode choke (power line filter) Inductance: 39 mH @ 10 kHz Rated current: 300 mA Number of lines: 2-line configuration Mounting: Through-hole (radial/vertical, 4 pins) AC voltage rating: up to 250 V DC resistance: ~3 Ω max Operating temperature: −40°C to +125°C Blocks high-frequency noise on power lines Allows normal differential current (useful signal) to pass Improves EMC compliance of electronic systems Reduces radio interference (RFI) in circuits AC/DC power supply input filters Switch-mode power supplies (SMPS) Industrial electronics and motor drives Household appliances and embedded systems Devices without proper grounding (noise suppression) #CommonPartsLibrary #Inductor #WE-CMB

60V Independent Type 700mV@5A 5A SMA(DO-214AC) Schottky Diodes ROHS The MDD SS56 is a Schottky barrier rectifier diode in a compact SMA (DO-214AC) surface-mount package, designed for high-efficiency power rectification in low-voltage, high-current applications such as DC-DC converters, power supplies, and polarity protection circuits. It uses a Schottky metal-semiconductor junction, which enables low forward voltage drop and fast switching performance, making it more efficient than standard PN junction diodes in switching power designs. Key Features Schottky technology for low forward voltage drop (~0.7 V at 5 A typical) Maximum repetitive reverse voltage: 60 V Average forward current: 5 A High surge current capability: up to 125 A (8.3 ms half-sine) Low power loss / high efficiency operation Fast switching (no significant reverse recovery delay) Low reverse leakage current (~1 mA at 60 V typical) High junction temperature rating: up to ~150°C Surface-mount SMA (DO-214AC) package for compact PCB design Typical Applications DC-DC converters (buck / boost converters) Power rectification in SMPS (switch-mode power supplies) Reverse polarity protection Freewheeling / flyback diode in inductive loads Battery-powered and portable electronics High-efficiency power management circuits #CommonPartsLibrary #Diode

Diode 40 V 3A Surface Mount SMB Schottky diode 3A 40V SMB The B340B-13-F is a surface-mount Schottky barrier rectifier diode designed for efficient power rectification in low-voltage, high-frequency applications. It features low forward voltage drop and fast switching capability, making it suitable for DC-DC converters, power supplies, reverse polarity protection, and freewheeling diode applications. The device is housed in a compact SMB (DO-214AA) package, enabling high current handling in space-constrained designs. ELECTRICAL CHARACTERISTICS Reverse Voltage (VRRM): 40 V Average Forward Current (IF(AV)): 3 A Forward Voltage (VF): 0.5 V (typical at IF = 3 A) Reverse Leakage Current (IR): 0.5 mA (max at VR = 40 V, 25°C) Peak Surge Current (IFSM): 80 A (8.3 ms single half sine wave) THERMAL CHARACTERISTICS Operating Junction Temperature Range: -55°C to +150°C Storage Temperature Range: -55°C to +150°C Thermal Resistance Junction-to-Ambient (RθJA): ~75 °C/W MECHANICAL CHARACTERISTICS Package Type: SMB (DO-214AA) Mounting Type: Surface Mount (SMD) Polarity: Cathode marked by band Weight: ~0.1 g FEATURES Low forward voltage drop for improved efficiency High surge current capability Fast switching speed Low power loss and high reliability Compact SMB package for space-saving PCB layout RoHS compliant and halogen-free APPLICATIONS Switch-mode power supplies (SMPS) DC-DC converters Reverse polarity protection circuits Freewheeling and clamping diodes Battery charging circuits MANUFACTURER / PART DETAILS Manufacturer: Diodes Incorporated Part Number: B340B-13-F Package Code: SMB (DO-214AA) #Diode #Rectifier #Single-Diode #SCHOTTKY #B340