Part Metadata Review and Update

flux

I reviewed the part project against the official Würth datasheet and the current project data.
Result
  • Datasheet property: already set to the official Würth PDF, so no update was needed.
  • Pin count: matches the datasheet: 4 terminals. The sync workflow for part projects is to use the datasheet as the source of truth and ensure the terminal count matches exactly
  • Main issues found: missing package metadata, incomplete terminal metadata, and likely symbol labeling mismatch.
Current project metadata vs datasheet Part metadata audit

Table

FieldIn projectIn datasheetStatus
Manufacturer Part Number744821039744821039OK
Manufacturer NameWürthWürth Elektronik eiSos GmbH & Co. KGAcceptable, but could be made more exact
Part TypeInductorsCommon mode power line chokeAcceptable
Designator PrefixLInductor/choke familyOK
Datasheet URLOfficial Würth PDF already setSameOK
Package / Case CodeMissingXS, through-hole 4-pinMismatch / missing
DescriptionWE-CMB Common Mode Power Line Choke Size Typ XS; L = 39 mH; IR = 0.3 A; RDC = 3000 mWE-CMB Common Mode Power Line Choke, size XS, 39 mH, 0.3 A, 3000 mΩNeeds cleanup
Key specs from the datasheet Datasheet summary

Table

ParameterValue
SeriesWE-CMB
Exact MPN744821039
ManufacturerWürth Elektronik eiSos GmbH & Co. KG
Part typeCommon mode power line choke
Size / caseXS
MountingThrough-hole
Windings2
Terminal count4
Inductance39 mH ±30% @ 10 kHz / 0.1 mA
Rated current0.3 A max
DC resistance3000 mΩ max @ 20 °C
Rated voltage250 V AC max @ 50 Hz
Insulation test voltage1500 V AC @ 50 Hz / 5 mA / 2 s
Ambient temp at rated current-40 to +70 °C
Operating temperature-40 to +125 °C
Pin and symbol cross-check
The datasheet shows two windings:
  • Winding 1: pins 1-2
  • Winding 2: pins 4-3
It also shows the physical pin layout as:
  • top row: 4, 2
  • bottom row: 3, 1
Pin audit

Table

Datasheet pin pairingProject terminalProject Pin Number propertyStatus
Pin 131OK
Pin 242OK
Pin 323OK
Pin 414OK
Mismatches and concerns Flagged issues

Table

AreaFindingSeverity
Terminal metadataAll four terminals have Pin Type = UnspecifiedMedium
Terminal labelsSchematic designators are just 1, 2, 3, 4 instead of functional terminal namingLow
Pin descriptionsNo pin descriptions presentMedium
Package metadataPackage or Case Code is missing; datasheet says XSMedium
Description textRDC = 3000 m appears truncated; should be 3000 mΩ or 3.0 Ω equivalentLow
Manufacturer name precisionProject says Würth; datasheet gives full manufacturer nameLow
For a simple passive magnetic like this one, the part-project sync guidance says not to invent pin data, and to ensure exact pin-number matching from the datasheet before assigning any metadata
Symbol assessment
  • The pin numbering is consistent with the datasheet.
  • The winding pairing is not captured explicitly in the current symbol metadata.
  • The datasheet does not explicitly expose polarity dots in the extracted text, so I would not assign dot/start-finish semantics unless you want me to verify from the graphical figure manually.
  • Because all terminals are generic and unnamed, the symbol is technically usable but not very descriptive.
Footprint assessment
From the project index:
  • Footprint asset: WE-CMB_XS5.kicad_mod
  • 3D model asset: 744821039.stp
  • Pad count: 4
From the datasheet:
  • Recommended hole pattern: 10.0 mm x 4.5 mm
  • Hole diameter: Ø1.1 mm
So the high-level footprint check looks consistent:
  • 4 pads present
  • Pin numbering 1-4 present
  • Footprint family naming aligns with the part size
What I could not fully verify from the currently exposed project data is:
  • exact pad copper diameter
  • exact pad shape
  • exact XY pad coordinates
So I can say the footprint appears plausibly matched, but not fully dimension-verified down to pad geometry.
Overall verdict Summary

Table

CategoryVerdict
MPNOK
Datasheet URLOK
Pin countOK
Pin numberingOK
Winding pairingDatasheet known, not clearly expressed in symbol metadata
Footprint family matchLikely OK
Footprint exact geometryPartially verified only
Part metadata completenessIncomplete
Symbol metadata completenessIncomplete
Recommended fixes
  • Add Package or Case Code = XS
  • Normalize manufacturer name to the full datasheet name
  • Fix the description text so resistance is clearly 3000 mΩ
  • Add terminal descriptions such as:
    • 3: Winding 1 terminal
    • 4: Winding 1 terminal
    • 1: Winding 2 terminal
    • 2: Winding 2 terminal
  • Optionally rename the terminals to make the winding pairs clearer
If you want, I can make those metadata fixes in the part project next.
Fix part metadata
Verify footprint dimensions
Run full part review
Sign up to send
~
Pin Number
4
~
Pin Number
3
~
Pin Number
2
~
Pin Number
1
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.7k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k
  • Push Button
    Push Button
    A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. SWITCH TACTILE SPST-NO 0.05A 24V
    jharwinbarrozo
    490.7k
  • T491D226K025AT
    T491D226K025AT
    22 µF Molded Tantalum Capacitors 25 V 2917 (7343 Metric) 800mOhm #Capacitors #Tantalum #22uF #part
    vasyl
    448.3k

744821039

744821039 thumbnail
39 mH @ 10 kHz 2 Line Common Mode Choke Through Hole 300mA DCR The 744821039 is a common mode choke (CMC) designed for power line filtering. It is used to suppress electromagnetic interference (EMI), particularly common-mode noise in AC/DC power circuits and switching power supplies. Type: Common mode choke (power line filter) Inductance: 39 mH @ 10 kHz Rated current: 300 mA Number of lines: 2-line configuration Mounting: Through-hole (radial/vertical, 4 pins) AC voltage rating: up to 250 V DC resistance: ~3 Ω max Operating temperature: −40°C to +125°C Blocks high-frequency noise on power lines Allows normal differential current (useful signal) to pass Improves EMC compliance of electronic systems Reduces radio interference (RFI) in circuits AC/DC power supply input filters Switch-mode power supplies (SMPS) Industrial electronics and motor drives Household appliances and embedded systems Devices without proper grounding (noise suppression) #CommonPartsLibrary #Inductor #WE-CMB

Properties

744821039

Würth

Inductors

we-online.com/catalog/datasheet/744821039.pdf

L

39m

H

creativecommons.org/licenses/by/4.0/

Pricing & Availability

DPN

Stock

Qty 1

1

8K

$3.73

1

40

$3.8474

Controls