• EV5920-5048-V-00A Evaluation Board

    EV5920-5048-V-00A Evaluation Board

    This is a recreation of the [EV5920-5048-V-00A](https://www.monolithicpower.com/en/ev5920-5048-v-00a.html) from MPS which demonstrates a MP5920 Hot-Swap controller commanding 5 MP5048 e-fuses in parallel. In Flux, this project demonstrates hierarchical design through the use of modules. Additionally, parametric symbols are used extensively to improve schematic cleanliness. Components in the canvas are locked because their positions correspond to the same positions as the original layout. Changelog from Original MPS Design: - Not including GPIO2 or GPIO3 as included in the original board due to NC pin name on the IC. - PC1 and PC2 footprints are 5mm in pitch and 12.5mm in diameter rather than the 16mm diameter in the original layout. This change corresponds with the selected part more accurately. -Renamed Designators to be More Verbose

    monolithicpower

    monolithicpower

    &

    jharwinbarrozo

    1 Star

  • Button Board

    Button Board

    Board for a quiz button

    haveltermaten

    haveltermaten

    &

    isml

    1 Star

  • PCB Layer View Controller with 2 layer board sdqm

    PCB Layer View Controller with 2 layer board sdqm

    A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

    fluxappcitestuser

    fluxappcitestuser

    1 Star

  • Pi 4 LED board

    Pi 4 LED board

    A whole bunch of nanopixel 5050s on a board, to be controlled by pwm0

    kofron

    kofron

    1 Star

  • The Green Dot 2040E5 Board nkFU

    The Green Dot 2040E5 Board nkFU

    The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

    kerry

    kerry

    1 Star

  • Multiple Fan Board

    Multiple Fan Board

    Attach multiple fans from the output of a board that turns on and off one fan. The original fan output is used as a signal to turn a MOSFET on and off to turn on 5 fans from the same original logic. An external power supply powers all the fans.

    shivanshk

    shivanshk

    1 Star

  • Multiple Fan Board V2

    Multiple Fan Board V2

    Welcome to your new project. Imagine what you can build here.

    shivanshk

    shivanshk

    18 Comments

    1 Star

  • FET Explosion Board

    FET Explosion Board

    I want to blow up a MOSFET gloriously. Basically supercapacitor onto MOSFET with a gate flipping setting.

    markwuflux

    markwuflux

    17 Comments

    1 Star

  • Phase Amp Board V2.0.F.1

    Phase Amp Board V2.0.F.1

    Phase Amp Controller 5.8GHz - JLCPCB rules

    emperormidas245

    emperormidas245

    16 Comments

    1 Star

  • smart extension board

    smart extension board

    Welcome to your new project. Imagine what you can build here.

    enochaddo

    enochaddo

    13 Comments

    1 Star

  • STM32H7 SDRAM Board

    STM32H7 SDRAM Board

    Welcome to your new project. Imagine what you can build here.

    vasyl

    &

    10 Comments

    1 Star

  • Powerbank board

    Powerbank board

    Fully-Integrated Bi-directional PD3.0 and Fast Charge Power Bank SOC with Multiple Input and Output Ports based on IP5328P

    tteague

    7 Comments

    1 Star

  • Powerbank board

    Powerbank board

    Fully-Integrated Bi-directional PD3.0 and Fast Charge Power Bank SOC with Multiple Input and Output Ports based on IP5328P

    sedundnes

    5 Comments

    1 Star

  • Powerbank board 5o6H

    Powerbank board 5o6H

    Fully-Integrated Bi-directional PD3.0 and Fast Charge Power Bank SOC with Multiple Input and Output Ports based on IP5328P

    r-shivaranjeni

    5 Comments

    1 Star

  • ESP32-S2 Dev Board k6h9

    ESP32-S2 Dev Board k6h9

    A low-power, single-core Wi-Fi high-performance microcontroller SoC with a rich set of IO capabilities. #esp32 #wifi #low-power

    nico

    &

    4 Comments

    1 Star

  • Powerbank board 7566

    Powerbank board 7566

    Fully-Integrated Bi-directional PD3.0 and Fast Charge Power Bank SOC with Multiple Input and Output Ports based on IP5328P

    1704232011

    3 Comments

    1 Star

  • USB-C Breakout Board

    USB-C Breakout Board

    Mini Project for breaking out USB-C for use with motors, mpus, power delivery.

    klam23

    3 Comments

    1 Star

  • Flux first serious circuit board

    Flux first serious circuit board

    Welcome to your new project. Imagine what you can build here.

    mykethearchangel

    1 Comment

    1 Star

  • Jharwin Powerbank Board [Example for AI Auto Layout] 1234 0c39

    Jharwin Powerbank Board [Example for AI Auto Layout] 1234 0c39

    Fully-Integrated Bi-directional PD3.0 and Fast Charge Power Bank SOC with Multiple Input and Output Ports based on IP5328P

    ryanf

    1 Comment

    1 Star

  • PCF8523 Real Time Clock Assembled Breakout Board

    PCF8523 Real Time Clock Assembled Breakout Board

    This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost. Perfect for datalogging, clock-building, time stamping, timers and alarms, etc. Equipped with PCF8523 RTC - it can run from 3.3V or 5V power & logic!

    vasyl

    1 Comment

    1 Star

  • CUSTOM BOARD SHAPE

    CUSTOM BOARD SHAPE

    Welcome to your new project. Imagine what you can build here.

    jharwinbarrozo

    jharwinbarrozo

    1 Comment

    1 Star

  • Snake Circuit Board

    Snake Circuit Board

    Welcome to your new project. Imagine what you can build here.

    austinf412

    1 Comment

    1 Star

  • ESP32-S2 Dev Board

    ESP32-S2 Dev Board

    A low-power, single-core Wi-Fi high-performance microcontroller SoC with a rich set of IO capabilities. #esp32 #wifi #low-power

    vasyl

    &

    jharwinbarrozo

    1 Comment

    1 Star

  • Traverse trace 2 layer board

    Traverse trace 2 layer board

    Welcome to your new project. Imagine what you can build here.

    merott

    1 Comment

    1 Star

  • STM32 LED Simulation Board

    STM32 LED Simulation Board

    This is a simulation of controlling an LED using STM32 in Flux!

    vasyl

    1 Comment

    1 Star

  • wiring-conversion board

    wiring-conversion board

    Welcome to your new project. Imagine what you can build here.

    chrchn

    &

    1 Star

  • FPGA C35T A7 Board 4d00

    FPGA C35T A7 Board 4d00

    Welcome to your new project. Imagine what you can build here.

    fpga-ben25121215

    &

    1 Star

  • ESP32 Programming Dev Board

    ESP32 Programming Dev Board

    Welcome to your new project. Imagine what you can build here.

    mekicaman

    1 Star

  • Arduino Board Request

    Arduino Board Request

    Welcome to your new project. Imagine what you can build here.

    hasofukirsch

    1 Star

  • Motor Driver Board

    Motor Driver Board

    Welcome to your new project. Imagine what you can build here.

    mmtapia

    &

    1 Star

  • AS5600 Flat Board

    AS5600 Flat Board

    Welcome to your new project. Imagine what you can build here.

    rohit297

    1 Star

  • Pico StreamDeck Display Board

    Pico StreamDeck Display Board

    Welcome to your new project. Imagine what you can build here.

    colinsvaughn

    1 Star

  • Silk and Board shape combo

    Silk and Board shape combo

    Welcome to your new project. Imagine what you can build here.

    giulioz

    &

    1 Star

  • DJ Mixing Board

    DJ Mixing Board

    Welcome to your new project. Imagine what you can build here.

    pbh2

    1 Star

  • L293D Motor driver board

    L293D Motor driver board

    Dual motor driver based on L293D IC #project #motor #L293D #driver #motordriver #polygon

    vasy_skral

    1 Star

  • AS5600 Micro Board

    AS5600 Micro Board

    Welcome to your new project. Imagine what you can build here.

    rohit297

    1 Star

  • BUG REPRO MKS-70 JX-10 Assigner Board

    BUG REPRO MKS-70 JX-10 Assigner Board

    Welcome to your new project. Imagine what you can build here.

    giulioz

    &

    jharwinbarrozo

    1 Star

  • OBDII to UART using STNXX chipset OG not-demo

    OBDII to UART using STNXX chipset OG not-demo

    OBD2 to UART interface dev board. Alternative to deprecated ELM237 Chipset. Documentation: - Power tree: https://drive.google.com/file/d/1oG5_56AuaiLtG3buUaOyhg63TMySnYF3/view?usp=sharing

    ryanf

    117 Comments

    1 Star

  • Q4 2022 Dogfooding - On Air

    Q4 2022 Dogfooding - On Air

    Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

    brooks

    &

    jharwinbarrozo
    +15

    99 Comments

    1 Star

  • 30 prompts in 30 days

    30 prompts in 30 days

    Design challenge: build a new PCB exclusively with Flux Copilot. Each day for 30 days, I'm using a new Copilot prompt to design a board with the RP2040. Follow the Twitter thread: https://twitter.com/ntzova/status/1671868701954519041

    nico

    73 Comments

    1 Star

  • Arduino Uno R3 Shield Template 31vK

    Arduino Uno R3 Shield Template 31vK

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    fer514

    66 Comments

    1 Star

  • Arduino Force Units Connection Shield

    Arduino Force Units Connection Shield

    An I2C extension shield with 6 shielded ethernet ports and a TCA9548 breakout board. This board is for the target side, any microcontroller with a standard Arduino header can use it. With proper target side hardware and an SSTP ethernet cable, the board provides robust i2c communication over 10ft(could be longer, haven't tested it yet) with a bitrate of 400kHz under a noisy environment( near motors, power cables, switches, etc). The shield board provides power to the target side and can power the i2c device. The board also supports drdy trigger, which is available on many i2c sensors. The TCA9548 breakout board is for a scenario in which all of your i2c devices have the same address. #Arduino #Uno #Shield #Template #project-template #project

    suckatpcbb

    45 Comments

    1 Star

  • ESP32-S3-MINI-1 Reference Design

    ESP32-S3-MINI-1 Reference Design

    This project is a reference project for ESP32-S3-MINI-1 to develop your IoT ideas. The board has RGB LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    vasyl

    38 Comments

    1 Star

  • ESP32-S3-WROOM-1 Reference Design iYm8

    ESP32-S3-WROOM-1 Reference Design iYm8

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    orassr

    37 Comments

    1 Star

  • Arduino Uno R3 Shield Template

    Arduino Uno R3 Shield Template

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    w4rr10r

    37 Comments

    1 Star

  • Arduino Uno R3 Shield for PureData VER1.3

    Arduino Uno R3 Shield for PureData VER1.3

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    soudruhromancz

    34 Comments

    1 Star

  • Arduino Mega2560

    Arduino Mega2560

    ATmega2560 Arduino Mega2560 AVR® ATmega AVR MCU 8-Bit Embedded Evaluation Board WITHOUT 3D model #Arduino #mega #2560 #ATMEGA2560 #template #project #project-template #Shield

    subeesh

    33 Comments

    1 Star

  • Arduino Uno R3 Relay Shield

    Arduino Uno R3 Relay Shield

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    corynrobinson

    33 Comments

    1 Star

  • Q4-2022-Dogfooding-On Air-markwu2001-Remix-R0

    Q4-2022-Dogfooding-On Air-markwu2001-Remix-R0

    Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

    markwu2001

    28 Comments

    1 Star

  • hvacController

    hvacController

    HVAC System controller board. Features 4 10A250VAC relays (For power control), a BME680 for environmental monitoring and a 5v-35v driver to control up to 2 DC motors. #esp32 #iot

    cosmoskiller

    19 Comments

    1 Star