Sostituzioni Componenti Elettronici

0:34

Analyzing in depth.

Vuoi aggiornare il modulo sostituendo MCU, interfaccia seriale e connettore.

Ho aggiornato il piano con:
1. ESP32-C3-MINI al posto di ESP32-WROOM-32E
2. interfaccia RS232 Transceiver al posto di MAX3485
3. sostituzione del terminale a 2 posizioni con una RJ45 Connector
4. mappatura RJ45:
  - pin 1 = TX RS232
  - pin 2 = RX RS232
  - pin 3 = GND
  - pin 4 = 5 V

Clicca Start nella barra del piano per avviare il lavoro. Se vuoi, posso anche aggiornare ancora il piano con il tipo di RJ45 desiderato.

Plan

#Goal

Update the current ESP32-based controller module to use an ESP32-C3-MINI microcontroller, transition the external serial interface from RS485 to RS232, and replace the existing 2-position terminal with an RJ45 connector. The RJ45 will be limited to pins 1-4 with the mapping: pin 1 (TX RS232), pin 2 (RX RS232), pin 3 (GND), and pin 4 (5V), maintaining the overall intent as an ESP32 controller with external serial connectivity and power distribution.

#Implementation plan

Replace the MCU:
1. Remove the ESP32-WROOM-32E component.
2. Add the ESP32-C3-MINI component available in the Flux parts library.
3. Reconfigure power, clock, and interface connections as required by the ESP32-C3-MINI.
Update the serial interface:
1. Remove the RS485 interface elements (including the MAX3485 transceiver) from the schematic.
2. Add RS232 interface components suitable for ESP32-level RS232 signaling.
3. Connect TX and RX lines appropriately from the ESP32-C3-MINI to the RS232 interface circuit.
Update the external connector:
1. Remove the 2-position terminal connector from the design.
2. Add an RJ45 connector limited to using only pins 1-4.
3. Map the RJ45 connector pins such that: pin 1 = TX RS232, pin 2 = RX RS232, pin 3 = GND, and pin 4 = 5V supply.
Verify overall module functionality:
1. Check all component interconnections including power distribution and serial communication.
2. Update design documentation with the revised pin mappings and component selections.

#Success criteria

The ESP32-C3-MINI is correctly incorporated and interfaced in place of the ESP32-WROOM-32E.
The RS232 interface functions properly, with correct TX and RX links reestablished via the new interface components.
The RJ45 connector is correctly configured with pins 1-4 mapped as specified, ensuring reliable external serial connectivity and power distribution.
Updated schematic accurately reflects all changes and meets the revised design requirements.

edsol

procedi con il piano

flux

1:13

Thought for 7 sec

Analyzing in depth.

Thought for a moment

Analyzing in depth.

Read schematic.

Analyzing in depth.

Read schematic.

Analyzing in depth.

Thought for a moment

Vuoi procedere con la sostituzione del microcontrollore, il passaggio da RS485 a RS232 e il cambio del connettore esterno con la mappatura dei primi 4 pin.

Il piano è pronto da eseguire, in linea con il flusso consigliato per modifiche di progetto multi-step in Flux
Clicca Start nella barra del piano per avviare l’esecuzione
Se vuoi cambiare qualcosa prima di partire, dimmelo e aggiorno il piano

Plan

#Goal

Update the current ESP32-based controller module to use an ESP32-C3-MINI microcontroller, transition the external serial interface from RS485 to RS232, and replace the existing 2-position terminal with an RJ45 connector. The RJ45 will be limited to pins 1-4 with the mapping: pin 1 (TX RS232), pin 2 (RX RS232), pin 3 (GND), and pin 4 (5V), maintaining the overall intent as an ESP32 controller with external serial connectivity and power distribution.

#Implementation plan

Replace the MCU:
1. Remove the ESP32-WROOM-32E component.
2. Add the ESP32-C3-MINI component available in the Flux parts library.
3. Reconfigure power, clock, and interface connections as required by the ESP32-C3-MINI.
Update the serial interface:
1. Remove the RS485 interface elements (including the MAX3485 transceiver) from the schematic.
2. Add RS232 interface components suitable for ESP32-level RS232 signaling.
3. Connect TX and RX lines appropriately from the ESP32-C3-MINI to the RS232 interface circuit.
Update the external connector:
1. Remove the 2-position terminal connector from the design.
2. Add an RJ45 connector limited to using only pins 1-4.
3. Map the RJ45 connector pins such that: pin 1 = TX RS232, pin 2 = RX RS232, pin 3 = GND, and pin 4 = 5V supply.
Verify overall module functionality:
1. Check all component interconnections including power distribution and serial communication.
2. Update design documentation with the revised pin mappings and component selections.

#Success criteria

The ESP32-C3-MINI is correctly incorporated and interfaced in place of the ESP32-WROOM-32E.
The RS232 interface functions properly, with correct TX and RX links reestablished via the new interface components.
The RJ45 connector is correctly configured with pins 1-4 mapped as specified, ensuring reliable external serial connectivity and power distribution.
Updated schematic accurately reflects all changes and meets the revised design requirements.

Mappa pin RS485

Aggiungi protezione seriale

Controlla alimentazione MCU

Esegui review dopo

GPIO36

ESP_RX

CC1

RS485_B

RS485_TX

RS485_EN

RS485_TX

GPIO15

GPIO14

ESP_TX

GPIO21

GPIO34

RS485_B

GPIO25

CC2

GPIO27

ESP_IO0

GPIO25

USBDN

ESP_IO0

GPIO22

GPIO16

RS485_A

GPIO5

USBDP

GPIO13

GPIO17

GPIO12

RS485_EN

GPIO35

GPIO33

GPIO12

RS485_RX

ESP_RX

GPIO33

GPIO36

GPIO32

USBDN

ESP_EN

USBDP

GPIO2

RS485_RX

GPIO26

GPIO13

CC2

GPIO39

GPIO26

RS485_A

GPIO39

GPIO32

ESP_EN

GPIO14

ESP_TX

ESP_EN

GPIO23

ESP_IO0

GPIO27

ESP_EN

GPIO35

Capacitance

10uF

+3V3

VBUS

+3V3

Resistance

10kΩ

C11

Capacitance

0.1uF

+3V3

Capacitance

10uF

PWR

+5V

Resistance

10 Ω

Resistance

5.1kΩ

+3V3

Capacitance

10uF

RST

Resistance

10 Ω

Capacitance

0.1uF

Resistance

1kΩ

Resistance

5.1kΩ

+5V

+3V3

Resistance

10 Ω

Capacitance

10uF

C10

Capacitance

0.1uF

+3V3

VBUS

+5V

C12

Capacitance

0.1uF

Resistance

10kΩ

+3V3

BOOT

Resistance

10kΩ

+3V3

TERM

IC3

IC1

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.0k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k

Project Name

ESP32 RS485 (Modbus) Controller Module 1f3f

Description

This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

Properties

License

creativecommons.org/licenses/by/4.0/

Pricing & Availability

Distributor	Qty 1
Arrow	$3.51–$3.88
Digi-Key	$10.07–$19.78
LCSC	$6.15–$6.95
Mouser	$9.98
Verical	$4.13–$4.28

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

kerry / ESP32 RS485 (Modbus) Controller Module 1f3f

Schematic