• ESP32-WROOM-32E Reference Design

    ESP32-WROOM-32E Reference Design

    This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #simpleEmbedded #espressif #template

    vasy_skral

    vasy_skral

    3 months ago

    454 Comments

    14 Stars

  • Cycle Sentry: 24-GHz Radar For Bicyclist Detection

    Cycle Sentry: 24-GHz Radar For Bicyclist Detection

    A PCB for automotive testing, featuring a 24 GHz radar system with an MCU for processing I&Q values. It connects to a frequency analyzer and uses CW and FMCW modes to detect bicyclists in blind spots of parked cars.

    roytaylor

    roytaylor

    8 months ago

    78 Comments

    7 Stars

  • Arduino ATMEGA328P-MU Template

    Arduino ATMEGA328P-MU Template

    Arduino Template based on ATMEGA328P-MU. This MCU is used in Arduino UNO Rev. 3, Arduino Nano V3.0, and some other. This template is a good starting point for your Arduino based project. #template #project #arduino #ATMEGA328P #project-template

    vasy_skral

    vasy_skral

    &

    jharwinbarrozo

    a year ago

    35 Comments

    7 Stars

  • Pet Tracker Device

    Pet Tracker Device

    This is a Pet Tracker Reference Design based on STM32L4. Tracker connects with network by SIM800L module connected to the STM. Also MCU connected to the GPS by uart and send data to server #STM32 #GPS #G4 #G3 #LTE #IoT #Tracker #smartHomeDevices #referenceDesign #edge-computing #edgeComputing #stm #template #referenceDesign

    vasyl

    vasyl

    &

    jharwinbarrozo

    a month ago

    61 Comments

    6 Stars

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    vasy_skral

    vasy_skral

    a year ago

    146 Comments

    5 Stars

  • Lipo Charger Shield for Arduino Uno R3 Clone Rev 2

    Lipo Charger Shield for Arduino Uno R3 Clone Rev 2

    Lipo Charger Shield. Directly plugs into Arduino Uno R3. Charge rate set with solder jumpers. Use with any MCU through tapping the VIN pin for power. VIN pin takes either

    jlamflux

    jlamflux

    a year ago

    20 Comments

    5 Stars

  • ESP32-S3-WROOM-1 Reference Design

    ESP32-S3-WROOM-1 Reference Design

    This project is a reference project for ESP32-S3-WROOM-1 to develop your IoT ideas. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #project #referenceDesign #simple-embedded #espressif #template #reference-design

    vasyl

    vasyl

    a year ago

    139 Comments

    3 Stars

  • Arduino Micro Template

    Arduino Micro Template

    Template for ATmega32U4 Arduino Micro AVR® ATmega AVR MCU 8-Bit Embedded Evaluation Board #project-template #template #arduino #micro

    jharwinbarrozo

    jharwinbarrozo

    2 years ago

    20 Comments

    3 Stars

  • ESP32-S2-MINI-1U Reference Design

    ESP32-S2-MINI-1U Reference Design

    This project is a reference design for an ESP32-S2-MINI-1U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32S2 #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    vasy_skral

    vasy_skral

    a year ago

    20 Comments

    3 Stars

  • ESP-WROOM-02U Reference Design

    ESP-WROOM-02U Reference Design

    This project is a reference design for an ESP-WROOM-02U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP8266 #WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    vasy_skral

    vasy_skral

    a year ago

    19 Comments

    3 Stars

  • ESP32-WROOM-32E Reference Design ePe2

    ESP32-WROOM-32E Reference Design ePe2

    This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    pauguardia

    6 months ago

    9 Comments

    3 Stars

  • ESP32-S2-MINI-2 Reference Design

    ESP32-S2-MINI-2 Reference Design

    This project is a reference design for an ESP32-S2-MINI-2 based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32S2 #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    vasy_skral

    vasy_skral

    a year ago

    8 Comments

    3 Stars

  • Solar Power Project

    Solar Power Project

    Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

    nico

    a year ago

    3 Comments

    3 Stars

  • CT Scanner DAS Board

    CT Scanner DAS Board

    CT Scanner DAS board design based on DDC232 ADC, iCE40 UltraPlus FPGA, and STM32F745 MCU integration. Designed for efficient data acquisition and processing #scanner #ice40 #computedTomography #STM32F745

    vasy_skral

    vasy_skral

    &

    jharwinbarrozo

    2 months ago

    1 Comment

    3 Stars

  • RP2040 Simple Template

    RP2040 Simple Template

    Basic project template for RP2040 MCU from Raspberry Pi Pico Development board #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template

    vasy_skral

    vasy_skral

    6 months ago

    3 Stars

  • SelfCare Plant Final Design

    SelfCare Plant Final Design

    This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    orlando113

    2 months ago

    173 Comments

    2 Stars

  • Weather Station

    Weather Station

    Weather Station controlled by STM32F031F6P6 MCU. 2x humidity and temperature sensors. USB powered

    brooks

    &

    jharwinbarrozo

    a month ago

    44 Comments

    2 Stars

  • Arduino ATMEGA2560-16AU Template

    Arduino ATMEGA2560-16AU Template

    Arduino Template based on ATMEGA2560-16AU. This MCU is used in Arduino Mega2560, Arduino Arduino Mega ADK, and some other. This template is a good starting point for your Arduino based project. #Arduino #mega #2560 #ATMEGA2560 #template #project #project-template

    vasy_skral

    vasy_skral

    a year ago

    22 Comments

    2 Stars

  • MPPT Solar Charge Controller

    MPPT Solar Charge Controller

    10A MPPT Solar Charge Controller with dual USB ports using Low-power 32bit ARMCortex-M0+ MCU (STM32L072). Expandable via Olimex Universal Extension Connector (UEXT) featuring I2C

    adrian95

    9 months ago

    20 Comments

    2 Stars

  • Arduino-UNO-R3

    Arduino-UNO-R3

    The Arduino Uno R3 is a microcontroller board based on a removable ATmega328P 20 digital input/output pins AVR MCU 8-Bit 5V USB 16MHz #Module #Arduino

    ghhhhfgh

    2 years ago

    2 Stars

  • ESP-CAM Motherboard Reference Design

    ESP-CAM Motherboard Reference Design

    This project is a motherboard for the ESP32-CAM module, which enables easy and flexible WiFi camera applications. The motherboard provides power supply, programming interface, and GPIO expansion for the ESP32-CAM. It also supports external sensors for more functionality. #motherboard #WiFi #MCU #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    vasy_skral

    vasy_skral

    a year ago

    23 Comments

    1 Star

  • WiFi Door and Window Sensor

    WiFi Door and Window Sensor

    This project is a WiFi-enabled door and window sensor using the ESP8684-WROOM-02C module from Espressif Systems. It includes a triple-color LED indicator, Reed switch for detection, a 3.3V Regulatory mechanism, and USB C for firmware flashing. It's powered by a regular non-rechargeable AAA battery. #WiFi #MCU #ReferenceDesign #project #ESP8684 #referenceDesign #simple-embedded #espressif

    vasy_skral

    vasy_skral

    a year ago

    17 Comments

    1 Star

  • ABX00027 Template

    ABX00027 Template

    Template for ABX00027. ATSAMD21G18A Arduino Nano 33 IoT SAM D ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #project-template #template

    vasyl

    vasyl

    2 years ago

    17 Comments

    1 Star

  • Solar Power Project

    Solar Power Project

    Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

    cluix07

    3 months ago

    15 Comments

    1 Star

  • LoRa to WiFi Gateway Reference Design

    LoRa to WiFi Gateway Reference Design

    This project is a LoRa to WiFi Gateway using an ESP32 microcontroller. The design incorporates a LoRa transceiver and a WiFi module to facilitate data transfer between LoRa and WiFi protocols. This gateway can be directly implemented in IoT-based applications where field devices using LoRa need to communicate with WiFi-enabled devices. #referenceDesign #project #ESP32 #LoRa #lora #hub #gateway #ESP32WROOM #RF #WIFI #MCU #referenceDesign #edge-computing #espressif #seeed #seeed-technology #reference-design

    vasy_skral

    vasy_skral

    a year ago

    15 Comments

    1 Star

  • ESP32 RS485 (Modbus) Controller Reference Design

    ESP32 RS485 (Modbus) Controller Reference Design

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation, and headers for connecting sensors and actuators. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated #reference-design

    vasy_skral

    vasy_skral

    a year ago

    14 Comments

    1 Star

  • ESP32-WROOM-32E Reference Design 0a6b

    ESP32-WROOM-32E Reference Design 0a6b

    This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #simpleEmbedded #espressif #template

    pokemonprofessor

    24 days ago

    9 Comments

    1 Star

  • FireBeetle 2 ESP32-E IoT Microcontroller (Supports Wi-Fi & Bluetooth)

    FireBeetle 2 ESP32-E IoT Microcontroller (Supports Wi-Fi & Bluetooth)

    Specially designed for IoT ESP-WROOM-32E-based main controller board with dual-core chips. #ESP32 #ESP32WROOM #RF #WIFI #MCU

    roytaylor

    roytaylor

    7 months ago

    9 Comments

    1 Star

  • ESP32-WROVER-E Reference Design

    ESP32-WROVER-E Reference Design

    This project is a reference design for an ESP32-WROVER-E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROVER #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    vasy_skral

    vasy_skral

    a year ago

    7 Comments

    1 Star

  • ESP-WROOM-02D Reference Design

    ESP-WROOM-02D Reference Design

    This project is a reference design for an ESP-WROOM-02D based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP8266 #WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    vasy_skral

    vasy_skral

    a year ago

    7 Comments

    1 Star

  • ESP32-S2-MINI-2U Reference Design

    ESP32-S2-MINI-2U Reference Design

    This project is a reference design for an ESP32-S2-MINI-2U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32S2 #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    vasy_skral

    vasy_skral

    a year ago

    6 Comments

    1 Star

  • BLE Door and Window Sensor Reference Design

    BLE Door and Window Sensor Reference Design

    This project is a BLE door and window sensor design that uses a U-blox BMD-330-A-R for BLE communication, a reed switch as a sensor, a multi-color LED for status display, and is powered by VBAT. There's also a programming interface and reset switch included. #WiFi #BLE #MCU #ReferenceDesign #project #referenceDesign #simple-embedded #ublox #template #reference-design

    vasy_skral

    vasy_skral

    3 months ago

    6 Comments

    1 Star

  • Weather Station Broken Up

    Weather Station Broken Up

    Weather Station controlled by STM32F031F6P6 MCU. 2x humidity and temperature sensors. USB powered

    brooks

    2 years ago

    4 Comments

    1 Star

  • ESP32-WROOM-32E Reference Design 6aM4

    ESP32-WROOM-32E Reference Design 6aM4

    This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #simpleEmbedded #espressif #template

    arthurvi

    3 months ago

    3 Comments

    1 Star

  • Weather Station

    Weather Station

    Weather Station controlled by STM32F031F6P6 MCU. 2x humidity and temperature sensors. USB powered

    vasy_skral

    vasy_skral

    8 months ago

    3 Comments

    1 Star

  • WiFi Camera with Motion Detection Reference Design

    WiFi Camera with Motion Detection Reference Design

    This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

    aladdin1

    5 months ago

    3 Comments

    1 Star

  • Pet Tracker Device noPL

    Pet Tracker Device noPL

    This is a Pet Tracker Reference Design based on STM32L4. Tracker connects with network by SIM800L module connected to the STM. Also MCU connected to the GPS by uart and send data to server #STM32 #GPS #G4 #G3 #LTE #IoT #Tracker #smartHomeDevices #referenceDesign #edge-computing #edgeComputing #stm #template #referenceDesign

    mousum

    7 days ago

    1 Comment

    1 Star

  • ESP32-WROOM-32E Reference Design

    ESP32-WROOM-32E Reference Design

    This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #simpleEmbedded #espressif #template

    atmr7

    &

    14 days ago

    1 Comment

    1 Star

  • ESP32 RS485 (Modbus) Controller Module 02e3 8a70 11db

    ESP32 RS485 (Modbus) Controller Module 02e3 8a70 11db

    This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

    tyson0906

    3 months ago

    1 Comment

    1 Star

  • WiFi RF-ID lock reference design vnb3

    WiFi RF-ID lock reference design vnb3

    This project is a WiFi RF-ID Lock, which uses a Espressif ESP-8684 microcontroller for WiFi connectivity and a Handson Technology RC522 for RF-ID functionality. It also includes an OLED display and user control via a switch. A step-up power converter ensures consistent 3.3V power. #WiFi #MCU #ReferenceDesign #project #ESP8684 #lock #OLED #referenceDesign #simple-embedded #espressif #template #reference-design

    bytransistor

    5 months ago

    1 Comment

    1 Star

  • Feather SPI adapter

    Feather SPI adapter

    ATSAMD21G18 Feather M0 Basic Proto series ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board

    merott

    3 years ago

    1 Comment

    1 Star

  • ESP32-WROOM-32E Reference Design i83J

    ESP32-WROOM-32E Reference Design i83J

    This project is a reference design for an ESP32-WROOM-32E based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #referenceDesign #simple-embedded #espressif #template #reference-design

    percyivan

    5 months ago

    1 Comment

    1 Star

  • KontrolSound Keyboard PCB

    KontrolSound Keyboard PCB

    Basic project template for RP2040 MCU from Raspberry Pi Pico Development board #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template

    giulioz

    10 months ago

    1 Comment

    1 Star

  • FSAVE Temp

    FSAVE Temp

    Basic project template for RP2040 MCU from Raspberry Pi Pico Development board #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template

    anmolkingk

    a month ago

    1 Star

  • 3DO In-Game Reset Mod

    3DO In-Game Reset Mod

    A simple 3DO in-game reset mod. MCU sniffs controller data and fires a reset signal to the console when L+R+X+P buttons are pressed.

    robertdalesmith

    a year ago

    1 Star

  • Arduino Nano

    Arduino Nano

    ATmega328 Arduino Nano series AVR MCU 8-Bit Embedded Evaluation Board

    makis

    a year ago

    1 Star

  • Model-flaky

    Model-flaky

    Arduino Template based on ATMEGA328P-MU. This MCU is used in Arduino UNO Rev. 3, Arduino Nano V3.0, and some other. This template is a good starting point for your Arduino based project.

    dacre

    &

    +14

    a year ago

    1 Star

  • STC8G1K08A

    STC8G1K08A

    8KB 51Series FLASH DFN-8-EP(3x3) Microcontroller Units (MCUs/MPUs/SOCs) ROHS

    jdbriones

    a year ago

    1 Star

  • schematic of the Pulses through MCU

    schematic of the Pulses through MCU

    Welcome to your new project. Imagine what you can build here.

    marigilligan19

    a year ago

    57 Comments

  • MCU mosfet control

    MCU mosfet control

    Welcome to your new project. Imagine what you can build here.

    sharkovios

    a year ago

    18 Comments