Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-S3-WROOM-1-N16R8 is a high-performance Wi-Fi + Bluetooth Low Energy (BLE) module developed by Espressif Systems. It is built around the ESP32-S3 SoC, featuring a dual-core Xtensa LX7 32-bit processor running up to 240 MHz. This module integrates 16 MB Flash memory and 8 MB PSRAM, making it suitable for memory-intensive applications such as AI, image processing, and advanced IoT systems. It also includes an onboard PCB trace antenna, RF circuitry, crystal oscillator, and power management components—allowing designers to quickly integrate wireless connectivity into compact embedded designs. Key Features Processing & Memory Dual-core Xtensa LX7 CPU, up to 240 MHz 384 KB ROM, 512 KB SRAM + 16 KB RTC SRAM 16 MB Flash (Quad SPI) 8 MB PSRAM (Octal/Quad SPI) Connectivity 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 (LE) + Mesh support Integrated PCB antenna Peripherals & Interfaces Up to 36 GPIOs Interfaces: UART, SPI, I2C, I2S, PWM, ADC, USB OTG Built-in USB Serial/JTAG support Supports touch sensors, timers, watchdogs, CAN (TWAI) Electrical Characteristics Supply voltage: 3.0 V – 3.6 V TX power: up to ~20.5 dBm RX sensitivity: ~-103.5 dBm Operating temp: −40 °C to +65 °C (typical) Advanced Capabilities Optimized for AI acceleration (vector instructions) Suitable for voice recognition, image processing, and edge AI Low-power modes for battery-operated devices| Typical Applications IoT devices and sensor hubs Smart home & home automation AIoT (voice/image recognition) Industrial automation & monitoring Wearables and health devices USB-connected embedded systems #Module #RF-Transceiver #ESP32-S3

Accelerometer, Gyroscope, Magnetometer, 9 Axis Sensor I2C, SPI, UART Output The BNO085 is a high-performance 9-axis absolute orientation sensor system-in-package (SiP) that integrates a 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, and a low-power ARM Cortex-M0+ microcontroller running CEVA/Hillcrest SH-2 sensor fusion firmware. It provides accurate real-time orientation, motion tracking, and activity detection while offloading complex sensor fusion calculations from the host processor. The device is widely used in robotics, AR/VR systems, wearables, drones, IoT devices, and navigation applications. Key Features 9-axis motion sensing with integrated accelerometer, gyroscope, and magnetometer Built-in SH-2 sensor fusion engine for accurate orientation tracking ARM Cortex-M0+ processor for onboard motion processing Outputs quaternion, rotation vector, linear acceleration, gravity vector, angular velocity, and magnetic field data Advanced motion detection including tap, step, shake, and significant motion detection Activity classification and stability detection capabilities Low-latency rotation vectors optimized for AR/VR applications Supports I²C, SPI, and UART communication interfaces Configurable output data rates and timestamps Low-power operation suitable for battery-powered devices Compact 28-pin LGA package (5.2 mm × 3.8 mm) Operating temperature range: -40°C to +85°C Backward compatible with BNO080 designs while adding support for future application-specific libraries Applications Robotics and autonomous systems Virtual Reality (VR) and Augmented Reality (AR) Wearable devices and fitness trackers Drones and UAVs Head-mounted displays (HMDs) Industrial motion tracking IoT and smart devices Navigation and positioning systems #BNO085 #IMU #9AxisSensor #MotionTracking #SensorFusion #OrientationSensor #Robotics #AR #VR #IoT #Wearables #EmbeddedSystems #CEVA #HillcrestLabs #MotionDetection #Quaternion #InertialMeasurementUnit

Board Mount Humidity Sensors Intermediate Humidity and Temperature Sensor Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount The SHT41-AD1B-R2 is a fully calibrated, low-power environmental sensor that measures relative humidity (RH) and temperature. It integrates sensing elements, signal processing, and a digital interface into a small surface-mount package, making it ideal for space-constrained designs. Key Features Sensor Type: Digital humidity and temperature sensor Interface: I²C (easy MCU integration) Supply Voltage: ~1.08 V to 3.6 V Humidity Accuracy: up to ±1.8% RH (typical) Temperature Accuracy: up to ±0.2 °C (typical) Response Time: Fast measurement and low latency Power Consumption: Ultra-low, suitable for battery devices Package: DFN (compact, ~1.5 × 1.5 mm) Factory Calibration: No external calibration required Functional Overview The sensor uses capacitive humidity sensing combined with a bandgap temperature sensor. Internal electronics convert these measurements into digital data via I²C, eliminating the need for external ADCs or complex signal conditioning. Design Advantages Small footprint for compact PCBs Low power consumption for IoT and portable devices High reliability with long-term stability Fast response time for real-time monitoring Simple integration with microcontrollers Typical Applications IoT and smart home devices HVAC and climate control systems Wearables and portable electronics Industrial monitoring systems Environmental data logging #CommonPartsLibrary #Sensors,-Transducer #Humidity #Moisture-Sensor #SHT4x

Pressure Sensor 4.35PSI ~ 18.13PSI (30kPa ~ 125kPa) Absolute 10-WFLGA The BMP581 is a high-precision digital barometric pressure sensor designed for altitude tracking, environmental monitoring, navigation, weather sensing, and industrial measurement applications. It integrates a MEMS pressure sensing element with a low-noise analog front end and digital signal processing to deliver highly accurate pressure and temperature measurements over a wide operating range. The device supports low-power operation, making it suitable for portable, battery-powered, and always-on sensing systems. The sensor communicates through standard digital interfaces and includes configurable sampling, filtering, and interrupt features for flexible system integration. Its compact package enables use in space-constrained embedded designs such as wearables, mobile devices, drones, smart home systems, IoT devices, and industrial instrumentation. Engineering Specification Device Type Digital barometric pressure and temperature sensor Manufacturer Bosch Sensortec Pressure Measurement High-resolution absolute pressure measurement with integrated temperature compensation Temperature Measurement Integrated digital temperature sensing for environmental monitoring and pressure compensation Pressure Range Wide atmospheric pressure sensing range suitable for altitude and environmental applications Interface Support I²C and SPI digital communication interfaces Supply Voltage Low-voltage operation optimized for embedded and portable systems Power Consumption Ultra-low power modes with configurable performance and sampling settings Measurement Features Oversampling support with programmable output data rate and internal filtering Accuracy High absolute and relative pressure accuracy for precise altitude estimation and environmental sensing Noise Performance Low-noise sensor architecture for stable pressure readings and improved altitude resolution Interrupt Features Configurable interrupt generation for data-ready and threshold-based events FIFO Support Integrated FIFO buffering for efficient sensor data management Operating Temperature Industrial temperature operating capability for consumer and industrial environments Package Type Compact surface-mount package optimized for small PCB footprint designs Applications Altitude tracking, indoor navigation, weather stations, drones, wearable electronics, IoT sensing, HVAC systems, industrial monitoring, and portable devices #CommonPartsLibrary #Sensor #Transducer #PressureSensor

Temperature Sensor Digital, Local -40°C ~ 125°C 16 b 4-DFN (1.5x1.5) STS40-CD1B-R3 is a high-accuracy digital temperature sensor from Sensirion, designed for precise temperature monitoring in space-constrained and low-power applications. Part of the STS4x series, it features a fully calibrated temperature sensing element with an I²C digital interface, providing reliable measurements over a wide operating temperature range. Its ultra-compact 4-DFN package makes it ideal for IoT devices, wearables, consumer electronics, industrial controls, and battery-powered systems. Key Features High-accuracy temperature measurement (±0.2°C typical at 25°C) Wide operating temperature range: -40°C to +125°C Digital I²C interface for easy MCU integration 16-bit temperature resolution Low operating voltage: 1.08 V to 3.6 V Factory calibrated and linearized output Ultra-small 1.5 mm × 1.5 mm DFN package Low power consumption suitable for battery-powered devices Surface-mount package for automated assembly Robust performance for industrial and consumer applications #STS40 #STS40CD1BR3 #Sensirion #TemperatureSensor #DigitalSensor #I2C #EmbeddedSystems #IoT #IndustrialAutomation #WearableElectronics #EnvironmentalMonitoring #ElectronicsDesign

Gas, Humidity, Pressure, Temperature Sensor Digital Output The BME690 is a compact 4-in-1 environmental sensor from Bosch Sensortec designed for advanced indoor air-quality monitoring. It integrates gas, humidity, temperature, and barometric pressure sensing into a single low-power MEMS device. The sensor is optimized for battery-powered and high-condensation environments, making it suitable for smart home, industrial, wearable, and IoT applications. Key Features 4-in-1 environmental sensing: Gas sensing Relative humidity Temperature Barometric pressure Detects: Volatile Organic Compounds (VOCs) Volatile Sulfur Compounds (VSCs) Other air-quality-related gases Supports indoor air quality (IAQ) monitoring Provides: IAQ index bVOC equivalent CO₂ equivalent outputs Improved robustness for high-condensation environments Ultra-small package: 3.0 × 3.0 × 0.93 mm 8-pin metal LGA package Low power consumption suitable for battery-powered devices Interfaces: I²C up to 3.4 MHz SPI up to 10 MHz Wide operating range: Temperature: −40°C to +85°C Humidity: 0–100% RH Pressure: 300–1100 hPa Supply voltage: VDDIO: 1.2 V to 3.6 V VDD: 1.71 V to 3.6 V Humidity accuracy: ±3% RH Temperature accuracy: ±0.5°C Pressure accuracy: ±0.5 hPa absolute Supports AI-based gas classification using Bosch BME AI-Studio Pin-compatible evolution of the BME688 platform Designed for: Smart home devices HVAC systems Air-quality mapping Food freshness monitoring Wearables Industrial sensing applications #CommonPartsLibrary #Sensor

Battery Power Management IC Lithium Ion/Polymer 24-QFN (4x4) nPM1100 is an integrated Power Management IC (PMIC) with a linear-mode lithium-ion/lithium-polymer battery charger in a compact 2.1x2.1 mm WLCSP package. It has a highly efficient, dual-mode configurable output DC/DC buck regulator. nPM1100 is an extremely compact PMIC device, created for space constrained applications with a small lithium-ion or lithium-polymer battery. It is compatible with all nRF52 and nRF53 Series SoCs and supports charging batteries at up to 500 mA through USB, and also delivers up to 150 mA of current to power external components with regulated voltage. A minimum of five passive components are required for operation and the device functions without a control interface. It is the perfect companion for nRF52 and nRF53 multiprotocol SoCs in battery powered designs. Low quiescent current (IQ) extends battery life during shipping and storage with Ship mode, or in operation using auto-controlled hysteretic buck mode for high efficiency down to 1 µA loads. Charge and error indication LED drivers are built in. Charge profile limits are configurable and VBUS current limits can be fixed or auto-controlled with on-chip USB port detection. • 400 mA linear battery charger • Linear charger for lithium-ion/lithium-polymer batteries • Adjustable charge current from 20 mA to 400 mA • Selectable termination voltage of 4.1 V or 4.2 V • Automatic trickle, constant current, and constant voltage charging • Battery thermal protection • Discharge current limitation • JEITA compliant • Li-ion/Li-polymer USB battery charger with a high efficiency buck regulator • 800 nA - Typical quiescent current • 460 nA - Shipping mode quiescent current • Thermal protection • Input regulator • USB compatible current limit of 100 mA and 500 mA • 4.1 V to 6.7 V input voltage range for normal operation • 20 V overvoltage protection • Reverse current protection • 3.0 V to 5.5 V system voltage output • USB port detection supporting the following types: • SDP • CDP/DCP • 1.8 V to 3.0 V, 150 mA step-down buck regulator • Step-down buck regulator with up to 92% efficiency • Automatic transition between hysteretic and pulse width modulation (PWM) modes • Forced PWM mode for clean power operation • Pin-selectable output voltage (1.8 V, 2.1 V, 2.7 V, 3.0 V) • Soft start-up • LED drivers for charger state indication • 5 mA low side LED driver for charging indication • 5 mA low side LED driver for error indication • 2.3 V to 4.35 V battery operating input range • 2.1x2.1 mm WLCSP package • Suitable for two layer PCB design #CommonPartsLibrary #IntegratedCircuit #NordicSemiconductor #nPM1100 #PMIC #BatteryCharger #PowerManagement #LiIon #LiPolymer #BuckConverter #Wearables #IoT #WirelessSensor #LowPowerDesign #USBCharging #EmbeddedSystems #nRF52 #nRF53 #PortableElectronics

8 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold The TE Connectivity part 2386586-1 is a fine-pitch board-to-board (BTB) PCB receptacle connector designed for compact, high-density electronic devices. It is a vertical surface-mount connector with 8 positions and a 0.4 mm pitch, commonly used in portable electronics, embedded systems, and space-constrained PCB designs. Key Features Connector Type: PCB mount receptacle Connector System: Board-to-board (BTB) Positions: 8-pin Pitch: 0.4 mm fine pitch Rows: 2 Mounting Style: Surface mount (SMT) Orientation: Vertical Stack Height: 0.8 mm low-profile design Contact Plating: Gold (Au) Contact Material: Copper alloy Rated Current: 0.5 A max per contact Operating Voltage: 60 VDC Temperature Range: −40 °C to +85 °C Housing Material: High-temperature thermoplastic Application: Signal transmission in compact electronics Packaging: Tape & Reel for automated assembly This connector is optimized for: Compact embedded systems Wearables and handheld devices High-density PCB stacking Consumer electronics Low-profile modular designs

MAX-M10 RF Receiver BeiDou, Galileo, GLONASS, GPS, GNSS 1.561GHz, 1.575GHz, 1.602GHz -167dBm 921.6kbps Not Included Module The MAX-M10S-00B is a professional-grade, ultra-low-power GNSS positioning module from u-blox based on the u-blox M10 platform. It is designed for battery-powered applications such as asset trackers, wearables, IoT devices, and navigation systems. The module supports simultaneous reception of multiple GNSS constellations, providing high positioning availability, fast acquisition times, and excellent sensitivity even in challenging urban or weak-signal environments. It integrates a TCXO, LNA, and SAW filter to improve RF performance while maintaining very low power consumption. Key Features Multi-constellation GNSS receiver: GPS Galileo GLONASS BeiDou QZSS SBAS support (WAAS, EGNOS, MSAS, GAGAN) Concurrent tracking of up to four GNSS constellations for improved position availability and accuracy. Ultra-low power consumption: Approximately 25 mW in continuous tracking mode, making it ideal for battery-powered devices. High RF sensitivity: Tracking sensitivity up to −167 dBm for reliable operation in weak-signal conditions. High positioning accuracy: Typical position accuracy of approximately 1.5 m CEP under suitable conditions. Navigation update rate: Up to 10 Hz for responsive tracking applications. Integrated RF front-end: Built-in LNA (Low Noise Amplifier) Built-in SAW filter Integrated TCXO for stable operation. Supports Assisted GNSS services: AssistNow Online AssistNow Offline AssistNow Autonomous CloudLocate support for low-power IoT positioning. Communication interfaces: UART I²C NMEA and UBX protocols supported. Wide operating temperature range: −40°C to +85°C. Supply voltage: 1.76 V to 3.6 V. Typical Applications Asset tracking devices Wearable electronics Fleet management systems Industrial IoT Smart meters Drone and robotics navigation Personal navigation devices Timing and synchronization systems Package Information Package Type: Surface-mount LCC module Dimensions: 9.7 mm × 10.1 mm × 2.5 mm (typical module size) #Commonpartslibrary #RF #Wireless #RFreceivers #MAXM10S #uBlox #GNSS #GPS #Galileo #GLONASS #BeiDou #QZSS #NavigationModule #GNSSModule #GPSTracking #AssetTracking #IoT #IndustrialIoT #WearableTech #FleetManagement #DroneNavigation #EmbeddedSystems #ElectronicsDesign #PCBDesign #HardwareEngineering #LowPowerDesign #LocationTracking #Geolocation #RFDesign #LNA #SMTModule

Energy Harvesting Wireless Sensor, IoT, Smart Wearables PMIC 16-QFN #dc #solar #harvesting

IC RF TxRx + MCU 802.15.4, Bluetooth Bluetooth v5.0, Thread, Zigbee® 2.4GHz 48-VFQFN Exposed Pad The NRF52840-QFAA-F-R belongs to Nordic’s nRF52 series and supports multiple wireless standards including Bluetooth 5, Bluetooth Low Energy (BLE), Thread, Zigbee, ANT, and proprietary 2.4 GHz protocols. It features a 64 MHz ARM Cortex-M4F CPU with floating-point unit (FPU), making it suitable for both wireless communication and real-time embedded processing. The device integrates large memory resources, rich peripherals, USB support, NFC capability, and advanced security features, reducing the need for external components in wireless embedded designs. Key Features 32-bit ARM Cortex-M4F processor running at 64 MHz 1 MB Flash memory and 256 KB RAM Supports Bluetooth 5 / BLE, Thread, Zigbee, ANT, and proprietary 2.4 GHz protocols IEEE 802.15.4 compliant radio Up to +8 dBm TX output power High receiver sensitivity down to −103 dBm Data rates up to 2 Mbps Ultra-low power consumption for battery-powered applications USB 2.0 Full-Speed controller NFC-A tag support Multiple communication interfaces: SPI UART I2C (TWI) I2S PWM PDM ADC Up to 48 GPIOs Integrated ARM CryptoCell-310 security engine Operating voltage range: 1.7 V to 5.5 V Operating temperature: −40°C to +85°C Compact 48-QFN (6×6 mm) package Typical Applications BLE devices Smart home products Wearables Wireless sensors Industrial IoT HID devices (keyboard/mouse) Asset tracking Mesh networking devices USB dongles and gateways PCB Design Notes Community PCB reviews commonly recommend: Proper RF grounding and 50-ohm antenna routing Using ESD/TVS protection on USB lines Keeping RF matching components close to the antenna Using solid ground planes for 2.4 GHz performance #CommonPartsLibrary #IntegratedCircuit #RF

802.15.4, Bluetooth, WiFi 802.11a/b/g/n/ac/ax, Bluetooth v5.3, Zigbee® Transceiver Module 2.4GHz, 5GHz Antenna Not Included, U.FL/MHF, PCB Trace Surface Mount The LBES5PL2EL-923 is a compact, low-power Bluetooth® Low Energy (BLE) module developed by Murata. It integrates a Nordic Semiconductor SoC (nRF52 series) with an onboard antenna, providing a complete RF solution for wireless connectivity in embedded systems. The module is designed for IoT, wearable, and low-power wireless applications, offering reliable communication, small footprint, and minimal external component requirements. Key Features Integrated Bluetooth® Low Energy (BLE) 5.x compliant module Based on Nordic Semiconductor nRF52 series SoC Built-in chip antenna (no external antenna required) Ultra-low power consumption suitable for battery-powered devices Integrated RF matching and shielding Supports multiple BLE roles (Central, Peripheral, Broadcaster, Observer) Compact surface-mount package Pre-certified RF module (reduces certification effort) Electrical Characteristics Supply Voltage Operating Voltage: 1.7 V to 3.6 V Current Consumption TX Mode: ~5–10 mA (depending on output power) RX Mode: ~5 mA Sleep Mode: < 2 µA RF Characteristics Frequency Band: 2.4 GHz ISM (2400–2483.5 MHz) Output Power: up to +4 dBm Sensitivity: approx. -96 dBm Interfaces UART SPI I²C (TWI) GPIO (multiplexed) ADC inputs PWM Mechanical Specifications Package Type: Surface Mount Module (SMD) Dimensions: ~10 mm × 7 mm × 1.4 mm (approx.) Integrated antenna and shielding Environmental Ratings Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +125°C Compliance & Certifications Bluetooth SIG qualified FCC / IC / CE (module-level certification, varies by variant) RoHS compliant Applications IoT devices Wearables Smart home products Wireless sensors Industrial monitoring systems Pin Configuration (Summary) Power: VDD, GND Communication: UART, SPI, I²C GPIOs: Configurable digital I/O RF: Integrated antenna (no RF pin required) Design Considerations Follow recommended PCB layout for antenna clearance Avoid copper under antenna region Provide stable power supply with proper decoupling capacitors Ensure proper grounding for RF performance #commonpartslibrary #integratedcircuit #transceiver #wireless #rf

Ultra-Low Noise Digital MEMS Microphone with PDM Output – High-performance omnidirectional MEMS microphone designed for voice assistants, smart speakers, conferencing systems, industrial voice interfaces, IoT devices, wearables, automotive applications, and embedded audio systems. Part of the Infineon XENSIV™ microphone family, it features a digital PDM output, 73 dB(A) signal-to-noise ratio (SNR), −26 dBFS sensitivity (±1 dB @ 94 dB SPL), and an acoustic overload point (AOP) of 122 dB SPL, delivering excellent speech intelligibility and high dynamic range. Operates from a 1.62 V to 3.6 V supply with 980 µA typical current consumption, supports a 20 Hz to 19 kHz frequency response, and includes multiple operating modes for power optimization. Features a bottom-port acoustic design, IP57 dust and water resistance, and AEC-Q103 qualification (on demand) for demanding environments. Housed in a compact 5-pad LLGA package (4.0 × 3.0 × 1.2 mm) and specified for operation over a −40°C to +85°C temperature range. #Infineon #IM73D122V01XTMA1 #XENSIV #MEMSMicrophone #DigitalMicrophone #PDM #VoiceInterface #SmartSpeaker #IoT #AudioProcessing #AECQ103 #EmbeddedSystems

27 Hz ~ 18 kHz Digital, I2S Microphone MEMS (Silicon) 1.62 V ~ 1.98 V Omnidirectional (-37dB ±1dB @ 94dB SPL) Solder Pads TDK InvenSense T5848 TDK T5848 is a low-noise digital MEMS microphone with a bottom-port acoustic interface and industry-standard I²S digital audio output. The device integrates a MEMS microphone element, impedance converter, ADC, decimation filtering, anti-aliasing filtering, power management, and a 24-bit digital audio interface in a compact 3.5 mm × 2.65 mm × 0.98 mm package. The T5848 supports multiple operating modes including High Quality, Low Power, Sleep, and Always-On Voice (AOV) modes, making it ideal for battery-powered and voice-activated applications. With up to 68 dBA SNR, 133 dB SPL acoustic overload point, and extended frequency response from 27 Hz to 18 kHz, the T5848 is optimized for wearables, IoT devices, smart TVs, gaming systems, teleconferencing equipment, voice assistants, and always-listening audio applications. Search Keywords: T5848, TDK T5848, MEMS Microphone, Digital MEMS Microphone, I2S Microphone, Bottom Port Microphone, Always On Voice Microphone, AOV Microphone, Low Power MEMS Microphone, Wearable Microphone, IoT Audio Sensor, Voice Recognition Microphone, Digital Audio Input, 24-bit I2S Microphone, DSP Microphone, Smart Speaker Microphone, Voice Assistant Microphone, TDK InvenSense Microphone, Teleconference Audio Microphone, Embedded Audio Sensor Hashtags: #T5848 #TDK #InvenSense #MEMSMicrophone #DigitalMicrophone #I2SMicrophone #AudioSensor #AlwaysOnVoice #VoiceRecognition #WearableElectronics #IoTDevices #EmbeddedAudio #VoiceAssistant #SmartDevices #DSP #ElectronicsDesign #PCBDesign #EmbeddedSystems #HardwareEngineering #AudioElectronics

I²C-Controlled Single-Cell Buck Battery Charger IC with Power Path Management – Highly integrated switch-mode battery charger for single-cell Li-Ion/Li-Polymer batteries used in portable electronics, IoT devices, wearables, handheld terminals, medical devices, and embedded battery-powered systems. Operates from a 3.5 V to 18 V input supply and delivers up to 2 A programmable charging current with support for USB and adapter inputs. Features NVDC power-path management, I²C interface, integrated power MOSFETs, narrow VDC architecture, dynamic power management, input current optimization, buck charging efficiency up to 93%, and an integrated 12-bit ADC for monitoring battery voltage, charge current, input voltage/current, system voltage, and temperature. Includes JEITA temperature profile support, programmable charging parameters, USB OTG boost mode (5 V output), power-good indication, and comprehensive protection including overvoltage, overcurrent, thermal regulation, thermal shutdown, watchdog timer, and short-circuit protection. Operates over a −40°C to +85°C temperature range and is housed in a compact 18-pin WQFN-HR (3 × 2.5 mm) package. #TexasInstruments #BQ25628ERYKR #BQ25628E #BatteryCharger #LiIonCharger #PowerPathManagement #BuckCharger #USBOTG #I2C #PowerManagement #PortableElectronics #EmbeddedSystems

The XIAO RP2350 packs the power of the Raspberry Pi RP2350 (switchable architecture of dual Arm Cortex-M33 cores running at 150MHz with FPU, and dual open-hardware Hazard3 RISC‑V cores, enhanced security and encryption) into the classic XIAO form factor. Measuring just 21x17.5mm, it features 19 multifunction GPIOs, an RGB LED, and a Battery Management System with ultra-low power consumption of 27μA, battery power supply, and direct battery voltage measurement. Thanks to the XIAO ecosystem, the XIAO RP2350 is compatible with a wide range of add-ons, including displays, LED matrix, Grove modules, CAN Bus, Vision AI sensors, and mmWave sensors. With native support for MicroPython, C, and C++, the XIAO RP2350 is perfect for developers of all levels looking to create compact, battery-powered applications for smart control, wearables, DIY keyboards, and more.