Type-C USB 5V 2A Step-Up Boost Converter
The Step-Up Boost Converter with USB Type-C for 5V 2A Charging is an efficient power solution. It also feature the Type-C USB inter face. This boost converter enables fast charging at 5V 2A. And also cater to the modern power needs of electronic devices.
gokux

13 days ago

1 Use

Seeeduino XIAO demo
XIAO SAMD21 powered by Microchip SAMD21G18 chip is an ultra-small, high-performance universal development board, the pioneering product of the XIAO series. It supports Arduino / Micropython / CircuitPython development, which is the perfect microcontroller for you to get started with electronics.
gokux

18 days ago

444
The XIAO RP2350 packs the power of the Raspberry Pi RP2350 (switchable architecture of dual Arm Cortex-M33 cores running at 150MHz with FPU, and dual open-hardware Hazard3 RISC‑V cores, enhanced security and encryption) into the classic XIAO form factor. Measuring just 21x17.5mm, it features 19 multifunction GPIOs, an RGB LED, and a Battery Management System with ultra-low power consumption of 27μA, battery power supply, and direct battery voltage measurement. Thanks to the XIAO ecosystem, the XIAO RP2350 is compatible with a wide range of add-ons, including displays, LED matrix, Grove modules, CAN Bus, Vision AI sensors, and mmWave sensors. With native support for MicroPython, C, and C++, the XIAO RP2350 is perfect for developers of all levels looking to create compact, battery-powered applications for smart control, wearables, DIY keyboards, and more.
gokux

3 months ago

2 Uses

1 Comment

SGM2036S
Welcome to your new project. Imagine what you can build here.
gokux

9 months ago

7 Uses

SY80004DQD
4A SYNCHRONOUS STEP DOWN REGULATOR
gokux

9 months ago

12 Uses

MSM261D3526H1CPM
MSM261D3526H1CPM is an omnidirectional, Top‐ported, PDM digital output MEMS microphone. It has high performance and reliability. MSM261D3526H1CPM is availabl
gokux

9 months ago

12 Uses

HX6538
HX6538 is an extreme-low power, high-performance microcontroller designed for battery-powered endpoint AI applications. Combining Himax’s ultralow power CMOS image sensor and HX6538, the WE2 solution allows the device to be always-on and consumes single-digit milliwatt battery power.
gokux

9 months ago

1 Fork

11 Uses

E5 Development Kit
Wio-E5 Dev Kit embedded with Wio-E5 STM32WLE5JC LoRa module that supports Long Range protocol on the global frequency band. It provides full GPIOs, which support various data protocols and interfaces such as RS485, Grove, male/female headers, etc. This makes it user-friendly because it allows for easy and flexible connections to other devices or components. It would be a perfect choice for fast testing and rapid prototyping of your Long Range IoT projects.
gokux

9 months ago

Grove Vision AI
It is an MCU-based vision AI module powered by Arm Cortex-M55 & Ethos-U55. TensorFlow and PyTorch frameworks are supported. Compatible with Arduino IDE and no code model deployment and immediate visualization of identification results with SenseCraft AI.
gokux

10 months ago

1 Fork

1 Use

Wio-E5-LE
Wio-E5-LE module has a single-core STM32WLE5JC chip, Cortex M4 MCU, and SX126X. It uses 84% less power for transmission compared to the Wio-E5. The ultra-low power consumption of the Wio-E5-LE makes it very energy efficient, this power-saving design makes the Wio-E5-LE well-suited for applications needing minimal power usage.
gokux

10 months ago

2 Uses

Seeed Studio Wio-E5 mini Dev
Wio-E5 mini Dev Board builds in and leads out full GPIO of the Wio-E5 STM32WLE5JC LoRa module. Supporting Long Range protocol and global frequency, the Wio-E5 mini is able to achieve a transmission range of up to 10 km in open areas. It supports EU868 and US915, making it suitable for wireless sensor networks and other IoT devices that require battery power, low power consumption and long range.
gokux

10 months ago

Wio-WM1110 Dev Kit
The Wio-WM1110 Dev Kit is an all-in-one solution for developing low-power, long-range IoT positioning applications. Based on Wio-WM1110 Wireless Module, features Semtech's LoRa® technology for long-range wireless communication, GNSS, and Wi-Fi for location tracking, and also supports Bluetooth Low Energy, Bluetooth mesh, NFC, Thread, and Zigbee.
gokux

10 months ago

LoRaWAN® Gatewasy Module WM1302
WM1302 module is a new generation of Long Range gateway module in mini-PCIe form-factor based on Semtech® SX1302. It features extremely low power consumption, outstanding performance with CE, FCC, Telec certified.
gokux

10 months ago

1 Use

1 Comment

Seeed studio Wio-WM1110 Wireless
The Wio-WM1110 is a fusion positioning module for developing low-power, long-range IoT applications. It's embedded with Semtech LR1110 and Nordic nRF52840, features Semtech's LoRa technology for long-range wireless communication, GNSS, Wi-Fi, and Bluetooth for location tracking services.
gokux

10 months ago

Grove -  Sensor (SCD30)
The Grove - CO2 & Temperature & Humidity Sensor (SCD30) is a high precision carbon dioxide sensor, which is based on Sensirion SCD30. The measuring range of this sensor is 0 ppm-40'000 ppm, and the measurement accuracy can reach to ±(30 ppm + 3%) between 400ppm to 10'000ppm.
gokux

a year ago

6 Uses

Seeed Studio XIAO RP2040
The Seeed Studio XIAO RP2040 is as small as the Seeed Studio XIAO SAMD21 but it's more powerful. On one hand, it carries the powerful Dual-core RP2040 processor that can flexible clock running up to 133 MHz which is a low-power microcontrollers. On the Seeed Studio XIAO RP2040 there is also 264KB of SRAM, and 2MB of on-board Flash memory which can provide more program to save and run. On the other hand, this little board has good performance in processing but needs less power. All in all, it is designed in a tiny size as small as a thumb(20x17.5mm) and can be used for wearable devices and small projects.
gokux

a year ago

10 Uses

2 Comments

Seeed Studio XIAO ESP32C3
Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivity's. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.
gokux

a year ago

61 Uses

Seeed Studio XIAO nRF52840 Sense
Seeed Studio XIAO nRF52840 Sense is carrying Bluetooth 5.0 wireless capability and is able to operate with low power consumption. Featuring onboard IMU and PDM, it can be your best tool for embedded Machine Learning projects.
gokux

a year ago

4 Forks

9 Uses

Seeed Studio XIAO ESP32S3 Sense
Seeed Studio XIAO ESP32S3 leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB FLASH, and external SD card slot. All of these make it suitable for embedded ML, like intelligent voice and vision AI.
gokux

a year ago

1 Fork

37 Uses

Seeed Studio XIAO nRF52840
Seeed Studio XIAO nRF52840 is carrying wireless capability for the first time and it supports Bluetooth 5.0, also able to operate with low power consumption. It will be your best microcontroller for Bluetooth applications.
gokux

a year ago

1 Fork

5 Uses