Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-S3-WROOM-1-N16R8 is a high-performance Wi-Fi + Bluetooth Low Energy (BLE) module developed by Espressif Systems. It is built around the ESP32-S3 SoC, featuring a dual-core Xtensa LX7 32-bit processor running up to 240 MHz. This module integrates 16 MB Flash memory and 8 MB PSRAM, making it suitable for memory-intensive applications such as AI, image processing, and advanced IoT systems. It also includes an onboard PCB trace antenna, RF circuitry, crystal oscillator, and power management components—allowing designers to quickly integrate wireless connectivity into compact embedded designs. Key Features Processing & Memory Dual-core Xtensa LX7 CPU, up to 240 MHz 384 KB ROM, 512 KB SRAM + 16 KB RTC SRAM 16 MB Flash (Quad SPI) 8 MB PSRAM (Octal/Quad SPI) Connectivity 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 (LE) + Mesh support Integrated PCB antenna Peripherals & Interfaces Up to 36 GPIOs Interfaces: UART, SPI, I2C, I2S, PWM, ADC, USB OTG Built-in USB Serial/JTAG support Supports touch sensors, timers, watchdogs, CAN (TWAI) Electrical Characteristics Supply voltage: 3.0 V – 3.6 V TX power: up to ~20.5 dBm RX sensitivity: ~-103.5 dBm Operating temp: −40 °C to +65 °C (typical) Advanced Capabilities Optimized for AI acceleration (vector instructions) Suitable for voice recognition, image processing, and edge AI Low-power modes for battery-operated devices| Typical Applications IoT devices and sensor hubs Smart home & home automation AIoT (voice/image recognition) Industrial automation & monitoring Wearables and health devices USB-connected embedded systems #Module #RF-Transceiver #ESP32-S3

Bluetooth, WiFi 802.11b/g/n, Bluetooth v4.2 + EDR, Class 1, 2 and 3 Transceiver Module 2.4GHz PCB Trace Surface Mount Wi-Fi + Bluetooth module designed for wireless connectivity in embedded applications, integrating the ESP32 dual-core 32-bit LX6 microprocessor with 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth v4.2 BR/EDR + BLE. It operates from a 3.0 V to 3.6 V supply, features 8 MB SPI flash and 2 MB PSRAM, and provides multiple peripheral interfaces including UART, SPI, I²C, I²S, SD/SDIO, PWM, ADC, DAC, CAN (TWAI®), and Ethernet MAC. #WiFiModule #BluetoothModule #ESP32 #Espressif #2_4GHz #BluetoothLE #BluetoothBR_EDR #DualCore #Embedded #IoT #SPIFlash #PSRAM #UART #SPI #I2C #I2S #SDIO #PWM #ADC #DAC #TWAI #EthernetMAC

The ESP32-WROOM-32E (16MB) is a highly integrated Wi-Fi + Bluetooth + Bluetooth Low Energy (BLE) module developed by Espressif. It is based on the ESP32-D0WD-V3 chip and features a dual-core processor, rich peripherals, and large flash memory—making it ideal for IoT, embedded systems, and wireless applications. This module is part of the upgraded WROOM-32E series, offering improved RF performance, better stability, and enhanced reliability compared to earlier versions like the 32D. Key Features (16MB Variant) Processor & Memory Dual-core Xtensa® 32-bit LX6 CPU, up to 240 MHz 520 KB SRAM + 448 KB ROM 16 MB SPI Flash (large storage for firmware/data) Optional variants with PSRAM for memory-intensive tasks Connectivity 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth v4.2 (BR/EDR + BLE) Integrated PCB antenna (no external antenna needed) Peripherals & Interfaces Up to 26–38 GPIOs (depending on usage) Supports: UART, SPI, I2C, I2S PWM (LED & motor control) ADC, DAC Capacitive touch sensors SD/SDIO/MMC, CAN (TWAI) Electrical & Physical Operating voltage: 3.0V – 3.6V Operating temperature: –40°C to +85°C (industrial range) Compact size: 18 × 25.5 × 3.1 mm Typical Applications Smart home devices (lighting, appliances) IoT sensors and gateways Industrial automation systems Wearables and smart gadgets Audio/voice processing (thanks to dual-core + large flash) #module #ESP32 #16MB

Connectivity options include 802.11 b/g/n Wi-Fi, Bluetooth® 5 (BLE), and BLE 5 Mesh support, operating at 2.4GHz for seamless wireless communication. The board is equipped with 2MB PSRAM and 384KB ROM, alongside a wide range of I/O interfaces, including 45 GPIOs, 4 x SPI, 3 x UART, 2 x I2C, 14 x touch pins, 2 x I2S, RMT, LED PWM, USB-OTG, TWAI, and 2 x 12-bit ADCs. It also features DVP for expanded functionality, making it a versatile solution for IoT and embedded applications.

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.402GHz ~ 2.48GHz Antenna Not Included Surface Mount The ESP32-C3 is a low-power, highly integrated 32-bit microcontroller (MCU) from Espressif Systems that combines 2.4 GHz Wi-Fi and Bluetooth® 5 Low Energy (BLE) connectivity in a single chip. Built around a single-core RISC-V processor running at up to 160 MHz, it is designed for secure, cost-effective IoT and embedded applications. The ESP32-C3 offers excellent wireless performance, low power consumption, robust security features, and a rich set of peripherals, making it ideal for smart home devices, industrial automation, wearable electronics, wireless sensors, and consumer IoT products. Key Features 32-bit RISC-V single-core CPU running up to 160 MHz Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 LE Low-power architecture with multiple sleep modes for battery-powered devices Advanced security features including Secure Boot, Flash Encryption, AES, SHA, RSA, HMAC, and hardware random number generator (RNG) Rich peripheral set including GPIO, UART, SPI, I²C, I²S, PWM, ADC, TWAI (CAN), USB Serial/JTAG, and timers Supports external QSPI flash memory and OTA (Over-the-Air) firmware updates Compact package options suitable for space-constrained embedded designs Fully supported by the ESP-IDF, Arduino, and MicroPython development ecosystems #ESP32C3 #Espressif #RISCV #WiFi #BluetoothLE #IoT #EmbeddedSystems #Microcontroller #WirelessMCU #LowPower #SmartHome #IndustrialIoT #SecureMCU #EdgeComputing #FirmwareDevelopment

The ESP32-S3-WROOM-1-N16R8 is a high-performance Wi-Fi and Bluetooth Low Energy (BLE) module from Espressif Systems, built around the ESP32-S3 SoC. It integrates a dual-core Xtensa® LX7 processor running at up to 240 MHz, along with 16 MB Quad SPI Flash and 8 MB Octal SPI PSRAM, making it suitable for memory-intensive embedded, IoT, AIoT, multimedia, and edge AI applications. The module includes an onboard PCB antenna, RF matching circuitry, crystal oscillator, and flash/PSRAM, simplifying hardware design and reducing development time. Key Features Dual-core Xtensa LX7 CPU operating up to 240 MHz 16 MB onboard Flash memory 8 MB onboard Octal PSRAM for large buffers, graphics, and AI workloads 2.4 GHz Wi-Fi (IEEE 802.11 b/g/n) Bluetooth 5.0 Low Energy (BLE) Built-in support for AI acceleration and vector instructions for machine learning and signal processing applications Rich peripheral set including: GPIO UART SPI I²C I²S USB 2.0 OTG PWM ADC Touch sensing SD/MMC interface CAN (TWAI) Integrated USB Serial/JTAG debugging capability Supply voltage range: 3.0 V to 3.6 V Operating temperature: −40°C to +65°C Surface-mount module with integrated PCB antenna Supports secure boot, flash encryption, and hardware cryptographic acceleration for secure IoT devices. Typical Applications Smart home and IoT devices Edge AI and machine learning Voice assistants and speech recognition Industrial automation Human-machine interfaces (HMI) Wireless sensors and gateways Smart displays and touch panels Audio streaming and multimedia devices Robotics and connected products #RF-Transceiver #Module #ESP32

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C3-WROOM-02-N4 is a compact, general-purpose Wi-Fi and Bluetooth Low Energy (BLE) module developed by Espressif Systems. It is built around the ESP32-C3 SoC and integrates RF components, crystal oscillator, flash memory, and PCB antenna in a single module. It is designed for a wide range of applications such as IoT devices, smart home systems, industrial automation, and consumer electronics, offering a balance of performance, low power consumption, and cost efficiency. Key Features MCU & Memory 32-bit RISC-V single-core processor up to 160 MHz 384 KB ROM 400 KB SRAM + 8 KB RTC SRAM Integrated 4 MB SPI flash (N4 variant) Connectivity 2.4 GHz Wi-Fi (802.11 b/g/n) Supports Station, SoftAP, and Station + SoftAP modes Bluetooth 5 (BLE) with mesh support Data rates up to 150 Mbps (Wi-Fi) Peripherals & Interfaces Up to 15 GPIOs Interfaces: SPI, UART, I2C, I2S LED PWM ADC (SAR) Timers & watchdog USB Serial/JTAG support TWAI® (CAN 2.0 compatible) #commonpartslibrary #transceiver #module #wireless #rf

ESP32-S3-MINI-1-N8 is a compact, low-power Wi-Fi and Bluetooth module from Espressif Systems based on the ESP32-S3 SoC. It integrates a dual-core Xtensa LX7 processor, 8 MB flash memory, crystal oscillator, RF matching circuitry, and a PCB antenna in a small SMD package, making it ideal for IoT devices, smart home products, industrial automation, HMI applications, AIoT edge devices, and USB-connected embedded systems. Key Features Dual-core 32-bit Xtensa LX7 CPU Up to 240 MHz operating frequency Includes single-precision floating-point unit (FPU) for enhanced processing performance. Integrated Memory 8 MB Quad SPI Flash (N8 variant) 512 KB SRAM 384 KB ROM 16 KB RTC SRAM. Wireless Connectivity 2.4 GHz Wi-Fi 4 (802.11 b/g/n) Data rates up to 150 Mbps Bluetooth 5 LE with Bluetooth Mesh support Simultaneous Wi-Fi and Bluetooth operation through an integrated coexistence mechanism. Rich Peripheral Set Up to 39 GPIOs USB 2.0 OTG USB Serial/JTAG SPI, I²C, I²S, UART PWM, MCPWM SDIO Host ADC Touch sensing Temperature sensor TWAI® (CAN 2.0 compatible) Timers and watchdogs. Integrated Components On-board 40 MHz crystal oscillator PCB antenna RF matching network Compact certified module design. Operating Conditions Supply voltage: 3.0 V to 3.6 V Operating temperature: −40°C to +85°C. Compliance RoHS and REACH compliant RF-certified module for simplified product development. #RF_transceiver #Module #Esp32

The ESP32-DEVKITC-VE evaluation kit from Espressif Systems is a high-performance development platform for RF, RFID, and wireless applications. It features the ESP32-WROVER-E with embedded Xtensa dual-core 32-bit LX6 microprocessor running up to 240 MHz, with 8MB Flash and 8MB PSRAM for efficient data processing. This board supports Wi-Fi 802.11 b/g/n and Bluetooth® Smart Ready 4.x (BLE) connectivity at 2.4GHz, offering wireless communication options. With 448KB ROM, 520KB SRAM, and 16KB SRAM in RTC, it provides ample memory for complex applications. It includes up to 24 GPIOs, SD card, UART, SPI, SDIO, I2C, LED and motor PWM, I2S, IR, pulse counter, capacitive touch sensor, ADC, DAC, and TWAI® (compatible with ISO 11898-1/CAN 2.0) #commonpartslibrary #ESP32-WROVER-E #evaluationboard

Wi-Fi® 4 + Bluetooth® 5 LE System-in-Package (SiP) MCU – Highly integrated 2.4 GHz wireless System-in-Package (SiP) featuring an ESP32-S3 dual-core Xtensa® LX7 microcontroller for IoT devices, smart home products, AIoT, edge computing, industrial automation, HMI, wearable devices, and embedded wireless applications. Operates at up to 240 MHz with 8 MB embedded Flash and 2 MB embedded PSRAM, eliminating the need for external memory and reducing PCB size. Supports Wi-Fi 802.11 b/g/n and Bluetooth® 5 LE (including Long Range and 2 Mbps PHY), with up to +20 dBm transmit power and 150 Mbps Wi-Fi data rate. Features native USB 2.0 OTG, vector instructions for AI acceleration, 45 programmable GPIOs, SPI, I²C, I²S, UART, USB, RMT, LCD/Camera interface, PWM, TWAI® (CAN), ADC, touch sensing, AES-XTS, SHA, RSA, ECC, HMAC, secure boot, Flash encryption, and a true random number generator (TRNG) for secure embedded applications. Operates from a 3.0 V to 3.6 V supply, over a −40°C to +85°C temperature range, and is housed in a compact 56-pin QFN (7 × 7 mm) package. #EspressifSystems #ESP32S3PICO1N8R2 #ESP32S3 #WirelessMCU #SystemInPackage #WiFi #Bluetooth5LE #DualCore #XtensaLX7 #USBOTG #AIoT #EmbeddedSystems

ESP32-S3-WROOM-1-N8 is a high-performance Wi-Fi and Bluetooth Low Energy (BLE) module from Espressif Systems. It is built around the ESP32-S3 SoC, featuring a dual-core Xtensa LX7 processor, integrated 2.4 GHz Wi-Fi and Bluetooth 5 LE connectivity, 8 MB SPI flash memory, and a PCB antenna. The module is optimized for AIoT, edge computing, human-machine interfaces, smart devices, and industrial IoT applications. Key Features Dual-core Xtensa® LX7 CPU running up to 240 MHz for high-performance embedded applications. 8 MB onboard SPI Flash (N8 variant) for firmware and data storage. 2.4 GHz Wi-Fi (802.11 b/g/n) with data rates up to 150 Mbps. Bluetooth 5 LE support including: Long Range mode 2 Mbps PHY Bluetooth Mesh Extended Advertising AI acceleration support through ESP32-S3 vector instructions for machine learning and signal-processing workloads. USB 1.1 OTG and USB Serial/JTAG integrated, simplifying debugging and USB device applications. Up to 45 GPIOs with extensive peripheral support: SPI I²C I²S UART PWM ADC Touch Sensors TWAI® (CAN-compatible) Camera Interface LCD Interface SDIO Host MCPWM Integrated 40 MHz crystal oscillator, RF matching circuitry, and PCB antenna for reduced external component count. Operating voltage range: 3.0 V to 3.6 V. Compact surface-mount module suitable for space-constrained designs. Typical Applications Smart home and home automation devices HMI displays and touchscreen products Voice recognition and audio processing Edge AI and machine learning applications Industrial IoT gateways and sensors Video streaming and camera systems USB-connected embedded devices Smart agriculture and healthcare equipment N8 specifically indicates 8 MB Flash and no PSRAM, making it a good choice for applications requiring substantial program storage but not large external RAM. #RF-transceiver #Module #ESP32