Bluetooth, WiFi 802.11b/g/n/ax, Bluetooth v5.4 Transceiver Module 2.4GHz Integrated, Chip Surface Mount Silicon Labs SiWG917 module is our lowest power Wi-Fi 6 plus Bluetooth LE 5.4, ideal for ultra-low power IoT wireless devices using Wi-Fi®, Bluetooth, Matter, and IP networking for secure cloud connectivity. It is optimal for developing battery operated devices that need long battery life. SiWG917 module includes an ultra-low power Wi-Fi 6 plus Bluetooth Low Energy (LE) 5.4 wireless CPU subsystem, and an integrated micro-controller (MCU) application subsystem, security, peripherals and power management subsystem all in a single 16 x 21.1 x 2.3 mm package. The wireless subsystem consists of a multi-threaded Network Wireless Processor (NWP) running up to 160 MHz, baseband digital signal processing, analog front end, 2.4 GHz RF transceiver and integrated power amplifier. The application subsystem consists of an ARM® Cortex®-M4 running up to 180 MHz, embedded SRAM, flash, ultra-low power sensor hub, and matrix vector processor. The ARM® Cortex®-M4 is dedicated for peripheral and application-related processing, while the NWP runs the wireless and networking stacks on independent threads, thus providing a fully integrated solution that is ready for a wide range of embedded wireless IoT applications. The modules come with modular radio type approvals for various countries, including USA (FCC), Canada (IC/ISED) and Japan (MIC), and are in compliance with the relevant EN standards (including EN 300 328 v2.2.2) for the conformity with the directives and regulations in EU and UK. KEY FEATURES • Wi-Fi 6 Single Band 2.4 GHz 20 MHz 1x1 stream IEEE 802.11 b/g/n/ax • Bluetooth LE 5.4 • Single chip Matter Over Wi-Fi Solution • ARM® Cortex® M4 Processor with FPU subsystem up to 180 MHz with rich set of Digital and Analog Peripherals. • Wi-Fi 6 Benefits: TWT for improved efficiency and longer battery life, MUMIMO/OFDMA for Higher Throughput, network capacity and low latency • Best in Class Device and Wireless Security • WLAN Tx power up to +17.5 dBm with integrated PA • Bluetooth LE Tx power up to +17 dBm with integrated PA • WLAN Rx sensitivity as low as -95.5 dBm • Wi-Fi 4 Standby Associated mode current: 71 μA @ 1-second listen interval • Embedded Flash option up to 8 MB/ optional external Flash up to 16 MB • Embedded PSRAM option up to 2 MB/ optional external PSRAM option up to 16 MB • Ultra-low power sensor hub peripherals • Matrix Vector Processor (MVP) • Embedded Wi-Fi, Bluetooth LE, Matter, and networking stacks supporting wireless coexistence • Three software-configurable MCU application memory options for sharing the RAM between the wireless, system, and application (192/256/320 KB) • Operating temperature: -40 to +85 ºC • Operating supply range: 3.0 to 3.63 V • Supply voltage for GPIOs: 1.71 to 3.63 V #WiFi6 #BluetoothLE54 #IoTModule #WirelessSoC #SiliconLabs #EmbeddedSystems #SmartHome #IndustrialIoT #LowPowerDesign #RFModule #ConnectedDevices #EdgeComputing #MatterReady #PCBDesign #ElectronicsEngineering

General ISM < 1GHz LoRa™, LoRaWAN Transceiver Module 863MHz ~ 870MHz, 902MHz ~ 928MHz Antenna Not Included Surface Mount 453-00139R is a compact LoRaWAN® and LoRa® RF transceiver module from Ezurio (formerly Laird Connectivity), designed for long-range, low-power wireless communication in Industrial IoT, smart agriculture, asset tracking, smart cities, and remote monitoring applications. Based on Semtech's SX1262 LoRa transceiver, the module provides excellent RF sensitivity and robust wireless performance while simplifying integration through multiple peripheral interfaces and a surface-mount package. Key Features LoRa® and LoRaWAN® wireless communication support Frequency bands: 863–870 MHz and 902–928 MHz Up to 22 dBm transmit power High receiver sensitivity down to -139.2 dBm Data rates up to 1 Mbps Wide supply voltage range: 2.0 V to 3.7 V Multiple interfaces: UART, SPI, I²C, I²S, ADC, GPIO, PWM, and IrDA Low receive current consumption (typically 7.6–8.1 mA) Operating temperature range: -40°C to +85°C Compact 47-pad surface-mount module Suitable for battery-powered and long-range IoT applications Hashtags #LoRa #LoRaWAN #Ezurio #LairdConnectivity #SX1262 #RFModule #WirelessCommunication #IndustrialIoT #SmartAgriculture #AssetTracking #RemoteMonitoring #SubGHz #IoTModule #EmbeddedSystems #LongRangeWireless

IC RF TxRx + MCU 802.15.4, General ISM < 1GHz ISM 863MHz ~ 930MHz 73-SMD Module #CommonPartsLibrary #IntegratedCircuit #RF-module #RF-Transceiver

LORA-CC68-915MHz-TCXO is a compact, high-performance LoRa wireless transceiver module from NiceRF based on the Semtech LLCC68 chipset. Operating in the 915 MHz ISM band, it features a high-precision TCXO (Temperature-Compensated Crystal Oscillator) for improved frequency stability, making it ideal for long-range, low-power IoT and industrial wireless communication applications. The module supports LoRa, FSK, and GFSK modulation schemes, provides up to +22 dBm (160 mW) transmit power, and achieves receiver sensitivity as low as -129 dBm for extended communication range. It communicates through an SPI interface and is optimized for battery-powered and low-power systems. Key Features Based on Semtech LLCC68 LoRa transceiver chip 915 MHz ISM band operation High-precision TCXO for enhanced frequency stability Supports LoRa, FSK, and GFSK modulation Up to +22 dBm (160 mW) RF output power Receiver sensitivity up to -129 dBm SPI communication interface Operating voltage: 1.8 V to 3.7 V Low receive current (~6.5 mA typical) Integrated antenna switching circuitry Compact 16 mm × 16 mm SMD package Suitable for long-range and low-power wireless applications FCC-certified 915 MHz version RoHS compliant Typical Applications Smart Metering Industrial Automation Agricultural Monitoring Smart Cities Environmental Sensors Asset Tracking Warehouse Management Remote Control Systems Street Lighting Control Battery-Powered IoT Devices #CommonPartsLibrary #Module #LoRa #LLCC68 #915MHz #TCXO #WirelessModule #RFModule #IoT #IndustrialAutomation #SmartMetering #LongRangeCommunication #LowPowerDesign #SPI #EmbeddedSystems #NiceRF

Wi-Fi + Bluetooth Module providing dual-band wireless connectivity with 1T1R IEEE 802.11a/b/g/n/ac Wi-Fi and Bluetooth 5.4. Supports SDIO v3.0/2.0 for the Wi-Fi interface and UART/PCM for the Bluetooth interface, offers data rates up to 433.3 Mbps (802.11ac, single stream), operates over 2.4 GHz and 5 GHz bands, and is housed in a compact 12 × 12 mm surface-mount module. #WiFiModule #BluetoothModule #WiFi5 #80211ac #Bluetooth54 #DualBand #SDIO #UART #PCM #SMTModule #RFModule #AMPAK #AP6256

Bluetooth Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount Bluetooth® Stereo Audio Module for adding dual-mode Bluetooth 5.0 wireless audio connectivity to embedded systems. It operates from a 3.2 V to 4.2 V supply, supports the 2.4 GHz ISM band with up to +11 dBm transmit power and –90 dBm receiver sensitivity, and provides UART, USB, I²C, I²S, SPI, GPIO, PWM, ADC, and JTAG interfaces in a compact surface-mount module. #MicrochipTechnology #BM83SM100TB #Bluetooth5 #BluetoothAudio #StereoAudioModule #RFModule #2_4GHz #WirelessAudio #EmbeddedSystems #SurfaceMount #UART #I2C #SPI #USB #I2S

802.15.4, Bluetooth, WiFi 802.11b/g/n/ac/ax, Bluetooth v5.0, Thread, Zigbee® Transceiver Module 2.412GHz ~ 2.484GHz, 5.18GHz ~ 5.885GHz Antenna Not Included Surface Mount RF wireless module integrating the ESP32-C5 SoC for Wi-Fi, Bluetooth LE, and IEEE 802.15.4 connectivity. Operates from a 3.0 V to 3.6 V supply and features a 32-bit RISC-V processor with 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), IEEE 802.15.4, 8 MB flash, 8 MB PSRAM, and an external antenna connector (U.FL/IPEX) for wireless communication. #RFModule #WiFi6 #BluetoothLE #IEEE802154 #ESP32C5 #RISCV #QFNModule

Wi-Fi HaLow® RF Transceiver Module – IEEE 802.11ah (Wi-Fi HaLow®) RF transceiver module for sub-GHz wireless connectivity in IoT and machine-to-machine (M2M) applications. Operates over the 850 MHz to 950 MHz frequency range with data rates up to 43.3 Mbps, 26 dBm maximum transmit power, and −107 dBm receiver sensitivity. Supports 64-QAM and 256-QAM modulation, operates from a 3.1 V to 3.6 V supply, and provides GPIO, SDIO, SPI, UART, and USB interfaces. Designed with an RF pad antenna interface, specified for operation over a −40°C to +85°C temperature range, and housed in a 38-pad surface-mount module. #MorseMicro #MM8108MF15457 #WiFiHaLow #IEEE80211ah #RFModule #WirelessModule #SubGHz #IoT #M2M #SDIO #SPI #UART #USB #EmbeddedSystems

Cellular LTE Cat M1/NB2 RF transceiver module with NTN support, external antenna, surface-mount 115-LFLGA/LGA package. Supports low-band 699 MHz to 960 MHz and mid-band 1710 MHz to 2170 MHz operation, UART host interface, 2.2 V to 4.35 V VBAT range, +23 dBm Class 3 output power, 16 MByte flash, and -40 °C to +85 °C operating temperature. #LTE #CellularModule #CatM1 #NBIoT #NTN #Murata #WirelessModule #RFModule

Bluetooth® and Ultra-Wideband (UWB) RF Module – Combined Bluetooth® 5.2 and IEEE 802.15.4z Ultra-Wideband (UWB) transceiver module integrating the Nordic nRF52840 and Qorvo DW3110 chipsets for wireless connectivity and precise ranging applications. Operates from a 2.5 V to 3.6 V supply, features 1 MB Flash, 256 KB RAM, 2.4 GHz Bluetooth LE, UWB support, and communication interfaces including I²C, SPI, UART, and USB. Designed for use with an external antenna, operates over a −40°C to +85°C temperature range, and is housed in a surface-mount LGA module. #Murata #LBUA5QJ2AB828 #Type2AB #Bluetooth5_2 #UltraWideband #UWB #IEEE802154z #nRF52840 #DW3110 #RFModule #WirelessModule #LGA #EmbeddedSystems

Multiprotocol Wireless MCU Module – 2.4 GHz Bluetooth® LE 6.0, Thread®, Matter, and IEEE 802.15.4 wireless MCU module integrating a 128 MHz Arm® Cortex®-M4F processor for IoT, smart home, industrial automation, medical, and connected embedded applications. Features 2 MB Flash, 512 KB SRAM, 64 KB ROM, 54 GPIOs, and supports Bluetooth LE, Thread, Zigbee-ready 802.15.4, and Matter networking. Operates from a 1.9 V to 3.6 V supply, delivers up to +11 dBm transmit power, −108 dBm receiver sensitivity, and supports 2 Mbps Bluetooth LE data rate. Includes U.FL external antenna connector, CAN FD, Ethernet, USB Full-Speed, ADC, DAC, SPI, I²C, UART, USART, PWM, JTAG, touch sensing, and advanced security with secure boot and hardware cryptography. Specified for operation over a −40°C to +85°C temperature range and housed in an 82-pad surface-mount RF module (19 × 25 × 2.75 mm). #Microchip #PIC32WMBZ6204UEI #PIC32WMBZ6204UE #WirelessMCU #BluetoothLE6 #Thread #Matter #IEEE802154 #ArmCortexM4F #RFModule #IoT #EmbeddedSystems

Wi-Fi® + Bluetooth® 5.0 RF Module – 2.4 GHz IEEE 802.11b/g/n and Bluetooth® 5.0 RF transceiver module with an integrated chip antenna for IoT, industrial automation, smart home, medical, and embedded wireless connectivity. Operates from a 1.62 V to 3.6 V supply, supports Wi-Fi data rates up to 72.2 Mbps (802.11n), +19 dBm transmit power, and −98 dBm receiver sensitivity. Features SPI, SDIO, UART, and I²C host interfaces, integrated power amplifier (PA), low-noise amplifier (LNA), power management circuitry, and supports WEP, WPA, WPA2, Wi-Fi Direct®, SoftAP, and Bluetooth BR/EDR + BLE. Specified for operation over a −40°C to +85°C temperature range and housed in a surface-mount certified RF module (22.4 × 14.7 × 2.0 mm). #Microchip #ATWILC3000MR110CA #ATWILC3000 #WiFiModule #Bluetooth5 #80211bgn #RFModule #WirelessConnectivity #IoT #SPI #SDIO #UART #BLE #EmbeddedSystems

Bluetooth Bluetooth v5.0 Transceiver Module 2.402GHz ~ 2.48GHz Integrated, Chip Surface Mount #BT860SA #Ezurio #BluetoothModule #Bluetooth5 #BluetoothLowEnergy #BLE #Zigbee #Thread #nRF52840 #RFModule #WirelessModule #IoT #EmbeddedSystems #SurfaceMount #CategoryRFWireless #CategoryBluetoothModules #CategoryZigbeeThreadModules #CommonPartsLibrary

Cellular GNSS, LTE Cat M1, LTE Cat NB1, LTE Cat NB2, LTE-M/NB-IoT Transceiver Module 617MHz ~ 2.2GHz Antenna Not Included Surface Mount #RF-module #RF-transceiver #GM02S

Transceiver 433MHz IPEX interface -100dBm 1km SPI SMD,20x14mm RF Transceiver Modules and Modems RoHS The E04-400M16S is based on STMicroelectronics' S2-LPQTR chip as the core, it is an ultra-small size chip wireless transceiver RF module independently developed by Ebyte, working in the 433M/470M frequency band, with a maximum transmission power of 16dBm. Since this module is a SPI pure hardware radio frequency transceiver module, it needs to be driven by MCU. Features  Ultra-small size, only 14x20mm;  The communication distance can reach 1km under ideal conditions;  The maximum transmit power is 16dBm;  The receiving current (RX) is as low as 7mA, and the transmitting current (TX) is as low as 10mA@10dBm;  Low power consumption, suitable for battery-powered applications;  Support 433M/470M frequency band;  Support multiple debugging modes of 2(G)FSK, 4(G)FSK, OOK, ASK;  Support 2.5V～3.6V power supply, power supply greater than 3.3V can guarantee the best performance;  Industrial-grade standard design, supporting long-term use at -40～85℃;  IPEX interface and stamp hole are optional, which is convenient for users to develop and integrate. Application  Smart meeting  Wireless alarm system  Smart door lock  Building automation  Industrial acquisition and control  Intelligent lighting system #E04_400M16S #EBYTE #S2LP #RFModule #WirelessTransceiver #433MHz #470MHz #IoT #IndustrialAutomation #SmartHome #LongRangeWireless #SPI #LowPowerRF #EmbeddedSystems #WirelessCommunication

FLYTO MM238RW 5.8G 4.9G 6.0G Wireless FPV Video Transmission Open-Source Receiver with SPI High Sensitivity The MM238RW is a high-sensitivity analog FPV (First-Person View) video receiver module designed for wireless image transmission systems operating in the 4.9 GHz, 5.8 GHz, and 6.0 GHz bands. It supports SPI control for frequency configuration and integration into custom embedded systems, FPV goggles, ground stations, and video receivers. The module provides low-latency CVBS video output, strong anti-interference performance, and wide compatibility with analog FPV video transmitters. Key Features Wide receiving frequency range: 4900 MHz to 5945 MHz SPI interface for channel and frequency control High receiver sensitivity of up to −90 dBm Low-latency analog CVBS video output FM/PLL demodulation architecture Excellent anti-interference performance 50 Ω RF input impedance Supply voltage: 3.3 V to 5.0 V Typical current consumption: 220 mA Compact module suitable for FPV goggles, monitors, and ground stations Supports custom firmware and open-source development platforms Applications FPV racing drones UAV and aerial photography systems Ground station receivers FPV goggles Wireless analog video monitoring Custom RF video receiver designs Hashtags: #MM238RW #FPV #VideoReceiver #5_8GHz #SPIInterface #DroneElectronics #WirelessVideo #CVBS #RFModule #UAV #FPVGoggles #EmbeddedSystems #AerialPhotography #LowLatency #OpenSourceFPV

802.15.4, Bluetooth Bluetooth v5.3, Zigbee® Transceiver Module PCB Trace, Antenna Not Included, U.FL Surface Mount #BT840NE #Fanstel #BluetoothModule #BluetoothLE #Bluetooth5_3 #Zigbee #IEEE802154 #nRF52840 #RFModule #WirelessModule #IoT #EmbeddedSystems #SurfaceMount #PCBTraceAntenna #UFLAntenna #LowPowerWireless #CommonPartsLibrary

General ISM > 1GHz Transceiver Module 1.9GHz PCB Trace Surface Mount Audio, voice, and data wireless module designed for hosted or embedded DECT communication in the 1.9 GHz frequency band. It integrates a DECT radio, multi-core processor, power amplifier, stereo codec, battery management, onboard antenna, and supports UART, SPI, PCM, and USB 2.0 interfaces, operating from a 1.9 V to 4.2 V supply over a −20 °C to +60 °C temperature range. Hashtags: #Renesas #DA14AVDDECT #DECT #WirelessModule #AudioModule #VoiceModule #DataModule #RFModule #19GHz #EmbeddedSystems #UART #SPI #PCM #USB20 #BatteryManagement

868/915MHz SPI SMD LoRa Module E22-900M22S is a compact, industrial-grade LoRa® wireless transceiver module developed by Ebyte, based on the Semtech SX1262 RF chipset. Operating in the 868/915 MHz ISM band, it communicates through an SPI interface and is designed for long-range, low-power wireless data transmission. The module offers excellent receiver sensitivity, strong anti-interference performance, and supports both LoRa and FSK modulation, making it suitable for smart metering, industrial automation, IoT sensor networks, remote monitoring, and wireless control applications. Key Features Based on the Semtech SX1262 LoRa transceiver Operates in the 850–930 MHz frequency range (optimized for 868/915 MHz ISM bands) SPI interface with data rates up to 10 Mbps Maximum transmit power of +22 dBm (160 mW) Receiver sensitivity up to −147 dBm (LoRa mode) Supports LoRa and FSK modulation Programmable air data rate up to 62.5 kbps (LoRa) and 300 kbps (FSK) Long communication range of up to 7 km under ideal line-of-sight conditions Wide operating voltage: 1.8 V to 3.7 V (3.3 V recommended) Ultra-low receive current (~6.8 mA) and low sleep current Industrial operating temperature: −40°C to +85°C Compact 20 × 14 × 2.8 mm SMD package with castellated pads/IPEX antenna options Suitable for IoT, AMI, smart home, industrial sensors, wireless alarms, and remote control systems. #Ebyte #E22Series #E22900M22S #SX1262 #LoRa #WirelessModule #SubGHz #SPI #IoT #IndustrialAutomation #SmartMetering #RemoteMonitoring #EmbeddedSystems #RFModule

ZED-F9T RF Receiver BeiDou, Galileo, GLONASS, GNSS, GPS -167dBm 54-LGA (22x17) Ang ZED-F9T-00B ay isang high-precision multi-band GNSS timing module mula sa u-blox na idinisenyo para sa mga application na nangangailangan ng napakatumpak na time synchronization. Gumagamit ito ng sabay-sabay na pagtanggap ng maraming GNSS constellations kabilang ang GPS, Galileo, BeiDou, at GLONASS upang makapagbigay ng nanosecond-level timing accuracy para sa telecommunications, smart grids, industrial automation, at critical network infrastructure. Ang module ay partikular na angkop para sa 4G/5G network synchronization at iba pang timing-sensitive systems. Key Features Multi-band GNSS receiver para sa high-accuracy timing applications Nanosecond-level timing accuracy (hanggang 5 ns typical timing accuracy) Support para sa GPS/QZSS, Galileo, BeiDou, at GLONASS constellations Differential timing mode para sa mas mataas na timing precision Configurable time pulse output mula 0.25 Hz hanggang 25 MHz Time pulse jitter na hanggang ±4 ns Carrier phase output support Built-in TCXO at programmable flash memory Integrated security features para sa mas mataas na robustness laban sa signal attacks UART, USB, SPI, at I²C communication interfaces Operating temperature range na -40°C hanggang +85°C Compact 17.0 mm × 22.0 mm × 2.4 mm LGA package Dinisenyo upang matugunan ang mahihigpit na 5G timing synchronization requirements #uBlox #ZEDF9T00B #GNSS #GPS #Galileo #BeiDou #GLONASS #TimingModule #HighPrecisionTiming #5G #Telecommunications #NetworkSynchronization #IndustrialAutomation #SmartGrid #LGA #EmbeddedSystems #IoT #ElectronicsDesign #HardwareEngineering #RFModule

ST Microelectronics STM32WB55VG ARM Cortex Bluetooth Low Energy 5.0, Zigbee and 802.15.4 module, 1 MB Flash, 256kb RAM, Fully integrated BOM bluetooth bluetooth5 bluetooth5.0 802.15.4 zigbee module stm32 rf ARM Cortex-M3 Cortex-M0+ RF?Module:ST?SiP?LGA?86?11x7.3mm*

RF_Module:ESP-07 Aliases: undefined