Datasheet Pin Grouping

flux

Done — I generalized the functional groups and set every pin’s Section to match its Pin Group exactly.
Open items:
  • None.
Suggested next steps:
  1. Review the symbol visually to confirm the new broad groups read the way you want.
  2. If desired, I can also reorder the symbol pins by these generalized sections.
A

adrian95

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

flux

I’ll assign Terminal Order and Orientation by group, keeping Power at order 1/top and Ground at order 10/bottom; since there are more groups than four orientation values, I’ll distribute the remaining groups across left/right rather than forcing an impossible unique orientation per group.

flux

Done — Terminal Order and Pin Orientation are assigned across the pin groups.
Open items:
  • Because the part has more functional groups than unique orientation values, I distributed non-power/ground groups between Left and Right rather than making every group uniquely oriented.
Suggested next steps:
  1. Visually inspect/regenerate the symbol to confirm the grouping layout reads well.
  2. If you want, I can revise the group ordering to prioritize RF/USB/debug differently.
Review and arrange
Arrange symbol pins
Verify pin metadata
Fix ordering conflicts
Export symbol preview
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Pin Description
Pin Group
GND_1
1
Ground
Terminal
Ground.
Ground
P0.05/AIN3
2
Bi-Directional
Terminal
General purpose I/O; analog input AIN3.
Analog
P0.04/AIN2
3
Bi-Directional
Terminal
General purpose I/O; analog input AIN2.
Analog
P0.27
4
Bi-Directional
Terminal
General purpose I/O.
GPIO
P0.26
5
Bi-Directional
Terminal
General purpose I/O.
GPIO
P0.30/AIN6
6
Bi-Directional
Terminal
General purpose I/O; standard-drive low-frequency I/O only; analog input AIN6.
Analog
P0.28/AIN4
7
Bi-Directional
Terminal
General purpose I/O; standard-drive low-frequency I/O only; analog input AIN4.
Analog
P0.02/AIN0
8
Bi-Directional
Terminal
General purpose I/O; standard-drive low-frequency I/O only; analog input AIN0.
Analog
P0.03/AIN1
9
Bi-Directional
Terminal
General purpose I/O; standard-drive low-frequency I/O only; analog input AIN1.
Analog
P1.13
10
Bi-Directional
Terminal
General purpose I/O; standard-drive low-frequency I/O only.
GPIO
P1.12
11
Bi-Directional
Terminal
General purpose I/O; standard-drive low-frequency I/O only.
GPIO
P1.11
12
Bi-Directional
Terminal
General purpose I/O; standard-drive low-frequency I/O only.
GPIO
P1.10
13
Bi-Directional
Terminal
General purpose I/O; standard-drive low-frequency I/O only.
GPIO
P0.10/NFC2
14
Bi-Directional
Terminal
General purpose I/O; standard-drive low-frequency I/O only; NFC antenna connection NFC2.
NFC
P0.09/NFC1
15
Bi-Directional
Terminal
General purpose I/O; standard-drive low-frequency I/O only; NFC antenna connection NFC1.
NFC
GND_2
16
Ground
Terminal
Ground.
Ground
BT_ANT
17
Signal
Terminal
RF port for Bluetooth antenna.
RF
GND_3
18
Ground
Terminal
Ground.
Ground
GND_4
19
Ground
Terminal
Ground.
Ground
P1.07
20
Bi-Directional
Terminal
General purpose I/O; standard-drive low-frequency I/O only.
GPIO
P1.06
21
Bi-Directional
Terminal
General purpose I/O; standard-drive low-frequency I/O only.
GPIO
P1.05
22
Bi-Directional
Terminal
General purpose I/O; standard-drive low-frequency I/O only.
GPIO
GND_5
23
Ground
Terminal
Ground.
Ground

LBUA5QJ2AB-828