MAX98357A Series 5.5V 3.2W PCM Input Class D Audio Power Amplifier - TQFN-16 The MAX98357A/MAX98357B is an easy-to-use, low-cost, digital pulse-code modulation (PCM) input Class D amplifier that provides industry-leading Class AB audio performance with Class D efficiency. The digital audio interface automatically recognizes up to 35 different PCM and TDM clocking schemes which eliminates the need for I2C programming. Operation is further simplified by eliminating the need for an external MCLK signal that is typically used for PCM communication. Simply supply power, LRCLK, BCLK, and digital audio to generate audio! Furthermore, a novel pinout allows customers to use the cost-effective WLP package with no need for expensive vias (refer to Application Note 6643: Optimize Cost, Size, and Performance with MAX98357 WLP for more information). The digital audio interface is highly flexible with the MAX98357A supporting I2S data and the MAX98357B supporting left-justified data. Both ICs support 8 channel time division multiplexed (TDM) data. The digital audio interface accepts specified sample rates between 8kHz and 96kHz for all supported data formats. The ICs can be configured to produce a left channel, right channel, or (left/2 + right/2) output from the stereo input data. The ICs operate using 16/24/32-bit data for I2S and left-justified modes as well as 16-bit or 32-bit data using TDM mode. The ICs eliminate the need for the external MCLK signal that is typically used for PCM communication. This reduces EMI and possible board coupling issues in addition to reducing the size and pin count of the ICs. The ICs also feature a very high wideband jitter tolerance (12ns typ) on BCLK and LRCLK to provide robust operation. Active emissions-limiting, edge-rate limiting, and overshoot control circuitry greatly reduce EMI. A filterless spread-spectrum modulation scheme eliminates the need for output filtering found in traditional Class D devices and reduces the component count of the solution. The ICs are available in 9-pin WLP (1.345mm x 1.435mm x 0.64mm) and 16-pin TQFN (3mm x 3mm x 0.75mm) packages and are specified over the -40°C to +85°C temperature range. ● Single-Supply Operation (2.5V to 5.5V) ● 3.2W Output Power into 4Ω at 5V ● 2.4mA Quiescent Current ● 92% Efficiency (RL = 8Ω, POUT = 1W) ● 22.8μVRMS Output Noise (AV = 15dB) ● Low 0.013% THD+N at 1kHz ● No MCLK Required ● Sample Rates of 8kHz to 96kHz ● Supports Left, Right, or (Left/2 + Right/2) Output ● Sophisticated Edge Rate Control Enables Filterless Class D Outputs ● 77dB PSRR at 1kHz ● Low RF Susceptibility Rejects TDMA Noise from GSM Radios ● Extensive Click-and-Pop Reduction Circuitry ● Robust Short-Circuit and Thermal Protection ● Available in Space-Saving Packages: 1.345mm x 1.435mm WLP (0.4mm Pitch) and 3mm x 3mm TQFN ● Solution Size with Single Bypass Capacitor is 4.32mm2 Applications ● Single Li-ion Cell/5V Devices ● Smart Speakers ● Notebook Computers ● IoT Devices ● Gaming Devices (Audio and Haptics) ● Smartphones ● Tablets ● Cameras #commonpartslibrary #integratedcircuit #linearamplifier #mono

Single output buck-boost converter 130nA input quiescent current 96% peak efficiency (VIN = 3.6V; VOUT = 3.3V) Output current: up to 400mA (VIN > 2.5V, VOUT = 3.3V) Input voltage range: 1.8V to 5.5V, supports single-cell Li-ion, 2x or 31.5V AA/AAA batteries Output voltage range: 1.8V to 5.0V Output voltage control using a pin reader (RAA236105) Selectable input current limit DVS with settable slew rate control Selectable forced bypass power saving mode PWM/PFM and buck/bo Input voltage range: 1.8 V to 5.5 V Output voltage range: 1.8 V to 5.0 V (programmable) Output current: up to 400 mA Peak efficiency: up to ~96% Quiescent current (IQ): ~100 nA class (ultra-low power mode) Very low standby consumption (ideal for battery-powered systems) Bypass mode available for near-zero regulation overhead Topology: Synchronous buck-boost converter Can step up or step down voltage automatically Maintains stable output even when input varies above/below output #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Voltage-regulator #Switching-regulator #RAA2361052

OR Controller N+1 ORing Controller N-Channel N:1 8-VSSOP The LM74610QDGKRQ1 is an automotive-qualified smart bypass ideal diode controller designed to drive an external N-channel MOSFET for reverse polarity protection and input supply OR-ing applications. The device minimizes forward voltage drop and power dissipation compared to traditional Schottky diodes while providing robust protection against reverse battery conditions. It supports operation across a wide automotive input voltage range and is optimized for high-current systems requiring low standby current, fast response, and reliable transient handling. The device is AEC-Q100 qualified for automotive applications and is commonly used in ECU power distribution, battery protection, and redundant supply systems. Engineering Specification Manufacturer: Texas Instruments Manufacturer Part Number: LM74610QDGKRQ1 Device Type: Automotive Smart Diode Controller Qualification Standard: AEC-Q100 Automotive Qualified Functionality: Reverse polarity protection and ideal diode control using external N-channel MOSFET Topology: Charge pump driven ideal diode controller Input Operating Voltage Range: Wide automotive battery operating range with load dump capability support Reverse Input Protection: Supports reverse battery protection without requiring a reverse polarity diode Gate Drive Method: Integrated charge pump for external N-channel MOSFET enhancement Forward Voltage Drop: Determined primarily by external MOSFET RDS(on) Quiescent Current: Ultra-low operating current for always-on automotive systems Transient Immunity: Automotive load dump and ISO transient tolerant design MOSFET Compatibility: External N-channel MOSFET Response Time: Fast reverse current blocking response Operating Temperature Range: Automotive extended temperature range Package Type: VSSOP Package Size: 8-pin small-outline package Mounting Type: Surface mount #Commonpartslibrary #Integratedcircuit #Powermanagement #orcontrollers

Ultra Low-Noise, Bypass LNA 500MHz to 2000MHz Single 21.2dBm 8-Pin DFN #commonpartslibrary #integratedcircuit #amplifier #rf

The RFFM6901 is a single-chip RF front-end module (FEM) designed for 868 MHz to 928 MHz ISM-band wireless communication applications. It integrates a high-power power amplifier (PA), low-noise amplifier (LNA), antenna diversity switch, and matching circuitry into a compact package, helping reduce external components, PCB space, and overall system cost. It is commonly used in smart energy systems, wireless metering, industrial monitoring, alarm systems, and other Sub-1 GHz wireless devices. Key Features Operating frequency range: 868 MHz to 928 MHz Integrated 1 W power amplifier Up to +30 dBm transmit output power Integrated low-noise amplifier with bypass mode Dual-port antenna diversity switch Separate 50 Ω transmit and receive interfaces Compact 32-pin LGA package (6 mm × 6 mm) Supply voltage range: 2.8 V to 4.2 V Typical LNA gain: 17 dB Low receiver noise figure: 1.5 dB Designed for portable and battery-powered wireless systems RoHS compliant Typical Applications Smart energy and smart metering Wireless alarm and security systems ISM-band communication devices Industrial wireless sensors Portable RF equipment IoT Sub-1 GHz wireless systems Search across more sources

10000 pF ±10% 50V Ceramic Capacitor X7R Radial Ceramic multilayer capacitor (MLCC) for general-purpose through-hole applications, featuring 10 nF capacitance, ±10% tolerance, 50 VDC rated voltage, and X7R dielectric with radial leaded construction. Suitable for decoupling, bypass, filtering, and coupling applications within the X7R operating temperature characteristics. #CeramicCapacitor #MLCC #X7R #10nF #50V #RadialLeaded

10000 pF ±5% 250V Ceramic Capacitor C0G, NP0 Radial FK20C0G2E103JN000 – Radial leaded through-hole ceramic capacitor. This capacitor has a stable C0G/NP0 dielectric, offering excellent temperature stability and low losses. It is suitable for general-purpose electronic circuits, decoupling, bypassing, timing, and filtering applications. Its robust construction makes it reliable for both consumer and industrial electronics. #CeramicCapacitor #ThroughHole #C0G #NP0 #Decoupling #Bypass #ElectronicsDesign #RadialCapacitor

50 mA CMOS LDOs with Shutdown and Reference Bypass, SOT-23-5 LDO Linear Voltage Regulator SOT?23*

CAP SAFETY 2.2nF ±20% 400V 250V TH The DCF222M34Y5UQ6BL7A0 is a multilayer ceramic capacitor manufactured for general-purpose electronic filtering, bypassing, and decoupling applications. This surface-mount passive component is designed to provide stable capacitance performance in compact electronic assemblies while supporting high-density PCB layouts and automated manufacturing processes. The capacitor utilizes ceramic dielectric technology to achieve low impedance and reliable high-frequency performance. It is commonly used in power supply filtering, signal coupling, noise suppression, RF circuits, embedded systems, industrial electronics, and consumer devices. Its compact footprint and stable electrical behavior make it suitable for modern digital and analog circuit designs requiring efficient decoupling and transient response characteristics. Engineering Specification Device Type Multilayer ceramic capacitor Capacitor Technology Ceramic dielectric multilayer structure Mounting Style Surface mount technology Electrical Characteristics Stable capacitance performance for filtering and bypass applications Dielectric Characteristics Designed for general-purpose signal and power conditioning applications Frequency Performance Low impedance behavior suitable for high-frequency operation Thermal Characteristics Stable operation across standard electronic operating temperatures Mechanical Characteristics Compact SMT package optimized for automated PCB assembly Reliability Features High insulation resistance and long operational lifetime Construction Monolithic multilayer ceramic structure Applications Power supply decoupling Signal filtering Noise suppression RF circuitry Embedded systems Industrial electronics Consumer devices Communication equipment Analog and digital circuit stabilization Manufacturer Commonly associated with Murata-style MLCC component series #commonpartslibrary #ceramiccapacitor #mlcc #passivecomponents #surfaceountcomponents #powerelectronics #signalfiltering #decouplingcapacitor #electronicsdesign #embeddedhardware #analogdesign #digitalelectronics #rfdesign #industrialelectronics

Linear Voltage Regulator IC Positive Fixed 1 Output 300mA SOT-23-5 The TPS7A20 is an ultra-small, low-dropout (LDO) linear regulator that can source 300mA of output current. The TPS7A20 is designed to provide low noise, high PSRR, and excellent load and line transient performance that can meet the requirements of RF and other sensitive analog circuits. Using innovative design techniques, the TPS7A20 offers an ultra-low noise performance without the addition of a noise bypass capacitor. The TPS7A20 also provides the advantage of low quiescent current, which can be ideal for battery-powered applications. With an input voltage range of 1.6V to 6.0V and an output range of 0.8V to 5.5V, the TPS7A20 can be used for a wide variety of applications. The device uses a precision reference circuit to provide a maximum accuracy of 1.5% over load, line, and temperature variations. The TPS7A20 features an internal soft-start to lower the inrush current, thus minimizing the input voltage drop during start up. The device is stable with small ceramic capacitors, allowing for a small overall solution size. The TPS7A20 has a smart enable input circuit with an internally controlled pulldown resistor that keeps the LDO disabled even when the EN pin is left floating and helps eliminate the external components used to pulldown the EN pin • Low output voltage noise: 7μVRMS – No noise-bypass capacitor required • High PSRR: 95dB at 1kHz • Very low IQ: 6.5μA • Input voltage range: 1.6V to 6.0V • Output voltage range: 0.8V to 5.5V • Output voltage tolerance: ±1.5% (max) • Very low dropout: – 140mV (max) at 300mA (VOUT = 3.3V) – 145mV (max) at 300mA (VOUT = 3.3V, DBV) • Low inrush current • Smart enable pulldown • Stable with 1µF minimum ceramic output capacitor • Packages: – 1mm × 1mm X2SON (DQN) – 0.616mm × 0.616mm DSBGA (YCK) – 0.612mm × 0.612mm DSBGA (YCJ) – 2.9mm × 2.8mm SOT23-5 (DBV) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LDO

Low-noise electric guitar distortion pedal with gain, tone, and volume controls. Relay true bypass with soft-touch foot switch, anti-pop mute, and symmetrical clipping. OPA1656 op-amps, separated analog/digital supplies, and ATtiny412 control logic keep noise to a minimum.

All details fully confirmed across multiple sources. The SS510 is a 5.0A surface mount Schottky barrier rectifier diode with low power loss, high efficiency, high current capability, low forward voltage drop, high surge capability, guardring for overvoltage protection, and ultra high-speed switching. Here's the complete spec. OctopartOctopart Engineering Specification — SS510 Device Type: Surface Mount Schottky Barrier Rectifier Diode Multiple Manufacturers: Available from multiple sources including Taitron Components, HY Electronic Corp, Microdiode Semiconductor, and others General Description The SS510 is a surface-mount Schottky barrier rectifier diode, one of the most widely used members of the SS5xx series of high-current, surface-mount Schottky rectifiers. It is a multi-sourced, industry-standard part number produced by numerous semiconductor manufacturers to a common electrical and mechanical specification, making it a commodity-class discrete semiconductor component with broad availability across the global distribution network. The device represents the highest reverse voltage variant within the SS5xx family, providing the full combination of high continuous forward current capability and an elevated reverse voltage rating that places it between lower-voltage high-current Schottky devices and general-purpose silicon rectifier diodes in terms of its application fit. Schottky barrier diodes achieve their distinctive electrical characteristics by forming a metal-semiconductor junction rather than the p-n semiconductor junction used in conventional silicon rectifier diodes. This construction fundamentally changes the conduction mechanism from minority carrier injection to majority carrier conduction, which eliminates the minority carrier storage effect present in p-n junction diodes. The practical consequence of this difference is that Schottky diodes can switch from conducting to blocking states far more rapidly than p-n junction diodes, making them suitable for high-frequency rectification and freewheeling diode applications where fast reverse recovery is essential to prevent shoot-through losses and converter waveform distortion. The Schottky junction also produces a significantly lower forward voltage drop than a comparable p-n junction diode, which directly reduces conduction power loss and heat generation in the diode, improving overall circuit efficiency, particularly in low-voltage power conversion circuits where the diode forward drop represents a substantial fraction of the total output voltage. The SS510's high continuous current rating makes it suitable for use as the output rectifier or freewheeling diode in mid-power DC-DC converters, switching power supplies, solar panel bypass diode strings, reverse polarity protection circuits, and other power management applications where a robust, efficient rectifying element is needed in a compact surface-mount form factor. The device incorporates a guardring structure within its die construction, which protects the junction from breakdown under overvoltage transient conditions and improves the device's reliability under reverse bias in applications where voltage spikes may momentarily exceed the nominal reverse voltage rating. Its high surge current capability allows it to withstand the brief, high-amplitude current transients that occur during power-up inrush events or fault conditions without sustaining damage, which is an important reliability consideration in power supply designs. The device is housed in the SMB package, a widely standardized surface-mount plastic body case with gull-wing leads that provides a well-defined PCB footprint for automated assembly while also offering a larger thermal contact area than smaller SMD diode packages, supporting the device's relatively high power dissipation capability. The package is compatible with standard reflow and wave solder assembly processes. Spec Sheet Identification Part Number: SS510 Series: SS5xx Surface Mount Schottky Rectifier Family Manufacturer: Multi-sourced commodity part number Functional Classification Device Type: Schottky barrier rectifier diode Junction Type: Metal-semiconductor Schottky junction Configuration: Single diode Electrical Characteristics Reverse Voltage Rating: High-voltage class for Schottky rectifier, highest in SS5xx series Average Forward Current: High continuous current class Peak Forward Surge Current: High surge capability for inrush and transient events Forward Voltage Drop: Low forward voltage drop, characteristic of Schottky junction Reverse Leakage Current: Low reverse leakage class Junction Capacitance: Low junction capacitance, supporting high-speed switching Switching Performance Recovery Type: Ultra high-speed, negligible reverse recovery time Switching Mechanism: Majority carrier conduction, no minority carrier storage Protection Features Guardring: Integrated guardring for overvoltage protection and junction ruggedness Thermal Characteristics Operating Junction Temperature Range: Extended range, standard high-reliability diode class Storage Temperature Range: Matches operating junction temperature limits Thermal Resistance, Junction to Lead: Defined per package specification Thermal Resistance, Junction to Ambient: Defined per PCB copper pad area Package & Mechanical Package Type: SMB (DO-214AA) Mounting Method: Surface mount technology (SMT) Polarity Marking: Cathode band marked on body per standard convention Target Applications Output rectification in DC-DC switching converters Freewheeling diodes in inductive switching circuits Reverse polarity protection Low-voltage power supply rectification Solar panel bypass diodes Battery charging circuits Environmental & Qualification RoHS Compliance: Yes, lead-free per standard multi-source specifications Packaging Supply Format: Tape-and-reel, per manufacturer standard packaging #SS510 #SchottkyDiode #SchottkyRectifier #SurfaceMountDiode #SMBDiode #DO214AA #PowerRectifier #FreewheelDiode #LowForwardVoltage #HighSpeedSwitching #PowerElectronics #DCDCConverter #PowerSupply #ReversePolarity #DiscreteComponent #SemiconductorDiode #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #CommodityPart

Multilayer Ceramic Capacitors MLCC - SMD/SMT GRM31CR72A105KA01K C1206 LCSC Part Number: C909823 MLCC 100V 1µF multilayer ceramic capacitor with X7R dielectric, surface-mount package, designed for power supply filtering, decoupling, bypass, and general-purpose high-voltage applications. Keywords/Tags: MLCC 100V 1µF, X7R ceramic capacitor, multilayer ceramic capacitor, SMD capacitor, decoupling capacitor

Linear Voltage Regulator IC Positive Fixed 1 Output 150mA SOT-23-5 LP2985IM5-2.7 is a low-dropout (LDO) linear voltage regulator designed to provide a stable 2.7 V output with very low quiescent current and excellent noise performance. It is optimized for battery-powered and noise-sensitive applications, offering high power supply rejection ratio (PSRR) and fast transient response. The device is housed in a compact SOT-23-5 package, making it ideal for space-constrained designs. Key Features Fixed 2.7 V output voltage Low dropout voltage Low quiescent current (IQ) High PSRR for noise-sensitive applications Stable with low ESR ceramic capacitors Thermal shutdown and current limit protection Small SOT-23-5 package RoHS compliant Electrical Characteristics Output Voltage: 2.7 V (fixed) Output Voltage Accuracy: ±1.5% (typical) Maximum Output Current: 150 mA Dropout Voltage: ~280 mV at 150 mA (typical) Quiescent Current (IQ): ~65 µA (typical) Line Regulation: 0.04%/V (typical) Load Regulation: 0.2% (typical) PSRR: Up to 70 dB (at low frequency) Operating Input Voltage Range: 2.5 V to 16 V Operating Temperature Range: -40°C to +125°C Mechanical Characteristics Package Type: SOT-23-5 (DBV) Mounting Type: Surface Mount Pin Count: 5 pins Approximate Dimensions: 2.9 mm × 1.6 mm Pin Configuration (Typical) IN: Input voltage GND: Ground OUT: Regulated output (2.7 V) EN: Enable (active high) BYPASS: Noise reduction / bypass capacitor connection Performance Characteristics Excellent output noise performance (low-noise design) Fast transient response to load changes Stable with small ceramic capacitors (typically 1 µF) Suitable for RF and analog circuits Applications Battery-powered devices Portable electronics RF and wireless modules Sensors and analog circuits Microcontroller power supplies #CommonPartsLibrary #IntegratedCircuit #PowerManagement #voltage-regulator #LDO #LP3985

1 µF ±10% 16V Ceramic Capacitor X7R 0603 (1608 Metric) The CGA3E1X7R1C105K080AC is a multilayer ceramic chip capacitor designed for high-reliability electronic applications requiring stable capacitance characteristics, compact form factor, and dependable performance under varying operating conditions. The component utilizes advanced ceramic dielectric technology to provide consistent electrical behavior with low losses and high insulation resistance suitable for signal filtering, decoupling, bypassing, and general-purpose circuit stabilization. The capacitor is constructed with a multilayer monolithic structure that enables high capacitance density while maintaining excellent mechanical integrity and thermal stability. Its surface-mount configuration supports automated assembly processes and high-density printed circuit board layouts commonly used in industrial, automotive, telecommunications, and consumer electronic systems. The dielectric system is engineered to maintain capacitance stability across a broad temperature range and varying electrical conditions while minimizing impedance and noise within electronic circuits. The component exhibits reliable frequency response characteristics and supports efficient suppression of voltage fluctuations and electromagnetic interference in high-speed and high-frequency applications. External terminations are designed to provide strong solderability, mechanical durability, and resistance to thermal cycling stresses during assembly and operation. The component is compatible with standard reflow soldering processes and is intended for long-term operation in environments subject to temperature variation, vibration, and electrical loading. The CGA3E1X7R1C105K080AC is suitable for use in power management circuits, communication equipment, embedded control systems, automotive electronics, and other applications requiring compact passive components with stable electrical performance and high reliability. #CommonPartsLibrary #CeramicCapacitors