Automotive 80 V, 2 A Synchronous Buck Converter IC – Automotive-grade synchronous step-down (buck) DC-DC converter optimized for automotive power supplies, industrial automation, battery-powered systems, distributed power, and embedded applications. Operates from a 4.2 V to 80 V input voltage and provides an adjustable output voltage from 1 V to 75 V with up to 2 A continuous output current. Features an integrated high-side and low-side MOSFET, 200 kHz to 2.2 MHz programmable switching frequency, 40 µA typical quiescent current, 98% maximum duty cycle, forced PWM/light-load efficiency modes, spread-spectrum EMI reduction, frequency synchronization, power-good output, fixed soft-start, and pre-biased startup. Includes comprehensive protection with cycle-by-cycle current limiting, hiccup-mode short-circuit protection, thermal shutdown, and undervoltage lockout (UVLO). Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient (−40°C to +150°C junction) temperature range and is housed in an 8-pin SO PowerPAD (HSOIC) package. #TexasInstruments #LMR38020FSQDDARQ1 #LMR38020Q1 #BuckConverter #SynchronousBuck #DCDCConverter #PowerManagement #AutomotiveElectronics #AECQ100 #SIMPLESWITCHER #HSOIC8 #EmbeddedSystems

Connector Header Surface Mount, Right Angle 2 position 0.071\" (1.80mm) , 250V , 4A , -25C ~ 85C SM02B-SFKH-TF is a 2-position surface-mount right-angle header connector from the JST SFK series, designed for compact wire-to-board applications. It features a 1.80 mm pitch, locking ramp mechanism, and shrouded housing for secure mating and reliable electrical connections in space-constrained electronic devices. The connector is optimized for automated assembly and offers excellent mechanical retention and durability. Key Features 2-position male header connector JST SFK series 1.80 mm pitch Surface-mount, right-angle configuration Shrouded 4-wall housing for secure mating Locking ramp for vibration resistance Tin-plated brass contacts Polyamide (PA6T) insulating material, UL94 V-0 rated Rated current: 4 A Rated voltage: 250 V Operating temperature range: -25°C to +85°C Solder retention feature for improved PCB assembly reliability Suitable for board-to-wire applications in compact electronic equipment General Applications Consumer electronics Industrial control equipment Power distribution connections Embedded systems Compact PCB interconnects Battery and signal connections #JST #SFKSeries #SM02BSFKHTF #WireToBoard #SMTConnector #RightAngleConnector #BoardConnector #ElectronicComponents #PCBDesign #Interconnect #ConnectorHeader #SurfaceMount #EmbeddedSystems #IndustrialElectronics #ConsumerElectronics

ESP32-WROOM32 ESP32 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® Smart 4.x Low Energy (BLE) Transceiver 2.4GHz Evaluation Board ESP32-POE is an ESP32-based IoT development board that combines Wi-Fi, Bluetooth, Ethernet connectivity, and Power over Ethernet (PoE) in a single platform. It is designed for industrial automation, smart home systems, remote monitoring, and other network-connected embedded applications where both power and data can be delivered through a single Ethernet cable. The board supports the ESP32 dual-core processor and provides expansion interfaces for sensors, storage, and peripherals. FEATURES • ESP32-WROOM-32 WiFi/BLE module • Ethernet 100Mb interface with IEEE 802.3 PoE support • LiPo battery charger • LiPo battery connector • UEXT connector • User button • Reset button • Micro USB with programmer for ESP32 programming • MicroSD card • Two extension connectors 0.1" step spaced at 1" • PCB dimensions: (75 x 28)mm ~ (3 x 1)" #ESP32 #ESP32POE #IoT #Ethernet #PoE #WiFi #Bluetooth #EmbeddedSystems #IndustrialIoT #SmartHome #OpenSourceHardware #Microcontroller #EdgeComputing #Automation #MakerProjects

Automotive Smart High-Side Power Switch – Single-channel N-channel smart high-side power switch for automotive power distribution and wire harness protection. Operates from a 4.1 V to 28 V supply (2.75 V minimum during cranking), supports a 15.7 A nominal load current, and features an ultra-low 3.6 mΩ typical RDS(on). Includes adjustable overcurrent protection (24 A to 137.5 A), integrated I²t wire protection, analog current sensing, open-load detection (ON/OFF state), short-circuit protection, reverse battery protection, overvoltage protection, undervoltage lockout (UVLO), overtemperature protection, slew-rate control, and logic-level control input. Qualified to AEC-Q100 and ISO 26262-compliant, it operates over a −40°C to +150°C junction temperature range and is housed in a 14-pin PG-TSDSO exposed-pad package. #Infineon #BTG7003A1EPWXUMA1 #PROFET #HighSideSwitch #SmartPowerSwitch #Automotive #PowerDistribution #LoadDriver #CurrentSense #WireProtection #AECQ100 #ISO26262 #EmbeddedSystems

Automotive CAN FD Transceiver – High-speed CAN FD transceiver compliant with ISO 11898-2:2016 for automotive ECUs, body electronics, industrial automation, motor control, battery management systems (BMS), and embedded communication networks. Supports Classical CAN and CAN FD communication with data rates up to 8 Mbps, operating from a 4.5 V to 5.5 V supply. Features standby mode with ultra-low power consumption, ±58 V bus fault protection, TXD dominant timeout, thermal shutdown, undervoltage protection, 100 mV receiver hysteresis, and failsafe operation for robust and reliable CAN communication. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C junction temperature range and is housed in a standard 8-pin SOIC package. Unlike the TCAN1462VDRBRQ1, this version does not include Signal Improvement Capability (SIC), making it suitable for conventional CAN/CAN FD networks. #TexasInstruments #TCAN1462VDRQ1 #TCAN1462Q1 #CANFD #CANTransceiver #AutomotiveElectronics #IndustrialCommunication #BatteryManagement #AECQ100 #SOIC8 #EmbeddedSystems

LORA-CC68-915MHz-TCXO is a compact, high-performance LoRa wireless transceiver module from NiceRF based on the Semtech LLCC68 chipset. Operating in the 915 MHz ISM band, it features a high-precision TCXO (Temperature-Compensated Crystal Oscillator) for improved frequency stability, making it ideal for long-range, low-power IoT and industrial wireless communication applications. The module supports LoRa, FSK, and GFSK modulation schemes, provides up to +22 dBm (160 mW) transmit power, and achieves receiver sensitivity as low as -129 dBm for extended communication range. It communicates through an SPI interface and is optimized for battery-powered and low-power systems. Key Features Based on Semtech LLCC68 LoRa transceiver chip 915 MHz ISM band operation High-precision TCXO for enhanced frequency stability Supports LoRa, FSK, and GFSK modulation Up to +22 dBm (160 mW) RF output power Receiver sensitivity up to -129 dBm SPI communication interface Operating voltage: 1.8 V to 3.7 V Low receive current (~6.5 mA typical) Integrated antenna switching circuitry Compact 16 mm × 16 mm SMD package Suitable for long-range and low-power wireless applications FCC-certified 915 MHz version RoHS compliant Typical Applications Smart Metering Industrial Automation Agricultural Monitoring Smart Cities Environmental Sensors Asset Tracking Warehouse Management Remote Control Systems Street Lighting Control Battery-Powered IoT Devices #CommonPartsLibrary #Module #LoRa #LLCC68 #915MHz #TCXO #WirelessModule #RFModule #IoT #IndustrialAutomation #SmartMetering #LongRangeCommunication #LowPowerDesign #SPI #EmbeddedSystems #NiceRF

USB to Serial Port Chip CH9101 CH9101N is a high-speed USB-to-UART bridge IC developed by WCH (Qinheng Electronics). It converts a USB 2.0 Full-Speed interface into a standard asynchronous UART serial interface, enabling seamless communication between a computer and microcontrollers, embedded systems, industrial equipment, and other UART-based devices. The device features an integrated clock oscillator and power-on reset circuitry, minimizing external components and simplifying PCB design. Housed in a compact SOP-8 package, the CH9101N supports UART logic voltages from 1.8 V to 5 V, making it suitable for a wide range of low-power and mixed-voltage applications. It is commonly used for USB debugging, firmware downloading, serial communication, and IoT development. Key Features USB 2.0 Full-Speed compliant device interface USB-to-UART bridge with baud rates up to 3 Mbps Supports 1.8 V, 2.5 V, 3.3 V, and 5 V UART I/O levels Integrated clock oscillator (no external crystal required) Built-in power-on reset circuitry Full-duplex UART communication Supports hardware flow control (RTS/CTS) Compatible with standard virtual COM port (VCP) drivers Compact SOP-8 package with minimal external components Suitable for MCU programming, debugging, and serial communication applications #CH9101N #WCH #USBtoUART #USBBridge #UART #USB20 #SerialCommunication #EmbeddedSystems #Microcontroller #IoT #IndustrialAutomation #Debugging #FirmwareDownload #SOP8 #InterfaceIC

Ultra-Low Quiescent Current LDO Voltage Regulator – Fixed 3.3 V low-dropout (LDO) linear voltage regulator delivering up to 150 mA output current for battery-powered devices, portable electronics, sensors, wireless modules, and embedded systems. Operates from a 2.3 V to 5.5 V input voltage and features an ultra-low 21 µA typical quiescent current, 135 mV maximum dropout voltage at 150 mA, and 60 dB PSRR at 10 kHz for efficient, low-noise power regulation. Includes an enable (EN) input, low shutdown current (<1 µA typical), overcurrent protection, thermal shutdown, and undervoltage lockout (UVLO). Optimized for use with 1 µF ceramic capacitors, operates over a −40°C to +125°C temperature range, and is housed in a 5-pin TSOT-23 package. #AnalogDevices #ADP121AUJZ33R7 #ADP121 #LDO #LinearRegulator #VoltageRegulator #LowDropout #PowerManagement #150mA #LowPower #TSOT23 #EmbeddedSystems

Automotive N-Channel Power MOSFET – 30 V N-channel TrenchFET® Gen IV power MOSFET optimized for automotive power distribution, battery management systems (BMS), motor drives, DC-DC converters, load switching, and high-current embedded power applications. Features a 30 V drain-to-source voltage (VDS), 437 A continuous drain current (TC = 25°C), and ultra-low RDS(on) of 1.16 mΩ maximum at VGS = 10 V (1.66 mΩ maximum at VGS = 4.5 V) for exceptionally low conduction losses. Offers ±20 V gate-to-source voltage, 595 A pulsed drain current, 500 W maximum power dissipation, low gate charge, optimized Qgd/Qgs ratio for fast switching, and an integrated body diode for high-efficiency switching applications. Qualified to AEC-Q101, 100% Rg and UIS tested, and specified for operation over a −55°C to +175°C junction temperature range. Housed in a PowerPAK® SO-8L surface-mount package. #Vishay #SQJ128ELPT1GE3 #SQJ128ELP #NChannelMOSFET #TrenchFET #PowerMOSFET #DCDCConverter #BatteryManagement #MotorDrive #AutomotiveElectronics #PowerPAKSO8L #EmbeddedSystems

Shielded RJ45 Connector with Integrated Magnetics (PoE) – Single-port RJ45 Ethernet connector with integrated 10/100Base-T magnetics for industrial Ethernet, embedded networking, IoT gateways, automation equipment, IP cameras, networking devices, and Power over Ethernet (PoE) applications. Features a through-hole, right-angle PCB mount, CAT5e-compliant interface, and supports 10/100Base-T Ethernet, Auto-MDIX, and PoE operation. Includes integrated isolation transformers, common-mode chokes, yellow and green status LEDs, shielded metal housing, board guide for secure mounting, and gold-plated contacts (30 µin / 0.76 µm) for reliable long-term performance. Designed with a tab-down RJ45 orientation, 90° entry, and operates over a −40°C to +85°C temperature range, making it suitable for rugged industrial and embedded networking applications. #WurthElektronik #7499210121A #RJ45Connector #EthernetConnector #IntegratedMagnetics #MagJack #CAT5e #PoE #10100BaseT #IndustrialEthernet #EmbeddedNetworking #IoT #EmbeddedSystems

Automotive High-Side Load Switch IC – Single-channel high-side load switch optimized for automotive power distribution, ADAS, infotainment, body electronics, industrial control, and embedded power management. Operates from a 1.5 V to 5.5 V control supply and switches 0.8 V to 5.5 V load voltages, delivering up to 3 A continuous output current with an ultra-low 19 mΩ (typical) ON resistance for minimal power loss. Features controlled slew-rate switching to reduce inrush current, integrated quick output discharge (QOD), fixed current limiting, thermal shutdown, reverse current blocking (when disabled), and low quiescent current for efficient operation. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient temperature range and is housed in a compact 6-pin SOT-23 Thin (TSOT-23-6) package. #TexasInstruments #TPS22995HQDDCRQ1 #TPS22995 #LoadSwitch #HighSideSwitch #PowerDistribution #PowerManagement #CurrentLimiting #AutomotiveElectronics #AECQ100 #SOT236 #EmbeddedSystems

5.5x5.0x1.6mm Top SMD Type 0.25 Watt Power integrated light source Intelligent control LED SK6812RGBW-WS is an intelligent RGBW (Red, Green, Blue, Warm White) addressable LED that integrates both the LED package and control IC into a single 5050 SMD package. Each LED functions as an individually controllable pixel, supporting 32-bit color data transmission (8 bits per channel) through a single-wire serial interface. The WS variant features a warm white channel with a color temperature of approximately 2700–3000 K, making it ideal for decorative, ambient, architectural, and smart lighting applications where accurate warm white illumination is required. The device operates from a 5 V supply and supports cascading of numerous LEDs with built-in signal reshaping for reliable long-distance data transmission. Key Features Integrated RGBW LED and control IC in a single 5050 SMD package Dedicated warm white (WS) channel, 2700–3000 K color temperature Individually addressable pixel control 32-bit color data (8-bit Red, Green, Blue, and White channels) Single-wire serial communication interface Built-in constant-current driver and PWM control Signal reshaping and automatic forwarding for long LED chains Typical data transmission rate of 800 kbps Operating voltage: 3.5 V to 5.5 V (5 V nominal) Wide operating temperature range: -40°C to +85°C High brightness, excellent color consistency, and long operational life Suitable for LED strips, pixel displays, decorative lighting, signage, and smart lighting systems #SK6812RGBW #SK6812RGBWWS #AddressableLED #RGBWLED #SmartLED #5050LED #WarmWhiteLED #LEDStrip #PixelLED #DigitalLED #EmbeddedSystems #IoTLighting #LEDDisplay #LightingDesign #Electronics

High-Speed Automotive Comparator – Single rail-to-rail high-speed comparator with push-pull output, adjustable hysteresis, and latch function for fast signal detection applications. Operates from a 2.4 V to 5.5 V supply, features 2.5 ns typical propagation delay, 325 MHz toggle frequency, ±5 mV maximum input offset voltage, and an input common-mode range extending 200 mV beyond both supply rails. Includes power-on reset (POR) functionality and is specified for an operating temperature range of −40°C to +125°C. Housed in a 6-pin SC70 (DCK) package. #TexasInstruments #TLV3603QDCKRQ1 #TLV3603Q1 #Comparator #HighSpeedComparator #RailToRail #PushPullOutput #AdjustableHysteresis #Latch #325MHz #2_5ns #SC70 #Automotive #EmbeddedSystems

PCB Terminal Block – 2-position, through-hole PCB terminal block for wire-to-board connections with 7.62 mm pitch. Features screw connection with tension sleeve, 32 A nominal current, 630 V rated voltage (III/2), 4 mm² nominal conductor cross-section, M3 screw terminals, and side interlocking for creating multi-position assemblies. Operates over a −40°C to +100°C temperature range and uses a horizontal wire-entry configuration. #PhoenixContact #1868076 #MKDS52762 #PCBTerminalBlock #TerminalBlock #WireToBoard #ScrewTerminal #ThroughHole #2Position #7_62mmPitch #32A #630V #COMBICON #EmbeddedSystems

Rotary Carbon Potentiometer (Audio/Log Taper) – Single-turn rotary potentiometer designed for audio volume control, user interface adjustment, industrial equipment, consumer electronics, musical instruments, and embedded control applications. Features a 10 kΩ logarithmic (audio) taper, ±20% resistance tolerance, and 50 mW (1/20 W) power rating. Part of the Bourns Pro Audio PTV09 Series, it provides 280° mechanical rotation, a 6 mm flatted shaft with 20 mm length, top adjustment, carbon resistive element, and through-hole snap-in mounting with PC pins and board locks for secure PCB installation. The potentiometer has a single gang, no integrated switch, and is suitable for low-power analog signal adjustment in compact electronic designs. #Bourns #PTV09A4020FA103 #PTV09 #RotaryPotentiometer #AudioTaper #LogarithmicPotentiometer #CarbonPotentiometer #VolumeControl #UserInterface #ThroughHole #EmbeddedSystems

Artix® UltraScale+ Field Programmable Gate Array (FPGA) IC 228 5347738 170100 676-BBGA, FCBGA Field-programmable gate array (FPGA) designed for implementing configurable digital logic and embedded system functions. The AMD XCAU15P-2FFVB676I is an UltraScale+™ architecture FPGA featuring programmable logic, integrated block RAM, DSP slices, high-speed serial transceivers, and hardened PCI Express® support, operating from a 0.85 V core supply and housed in a 676-ball FFVB package. It is part of the AMD UltraScale+ FPGA family, which supports high-performance and power-efficient programmable logic applications. #AMD #XCAU15P #UltraScalePlus #FPGA #ProgrammableLogic #BlockRAM #DSP #PCIe #HighSpeedTransceivers #FFVB676 #EmbeddedSystems #PCBComponents

Automotive 8 A Synchronous Buck Converter IC – High-efficiency synchronous step-down (buck) DC-DC converter optimized for automotive power supplies, industrial automation, networking equipment, point-of-load regulation, and embedded power applications. Operates from a 4.5 V to 28 V input voltage and provides an adjustable output voltage from 0.6 V to 13 V with up to 8 A continuous output current. Features integrated high-side (20.4 mΩ) and low-side (9.5 mΩ) MOSFETs, D-CAP3™ control architecture for fast transient response, 45 µA typical quiescent current, selectable switching frequencies of 500 kHz, 800 kHz, or 1.2 MHz, pre-biased startup, power-good (PG) output, soft-start, frequency synchronization, and light-load Eco-mode™ operation for improved efficiency. Includes comprehensive protection with cycle-by-cycle current limiting, undervoltage lockout (UVLO), overvoltage protection (OVP), thermal shutdown, and hiccup-mode short-circuit protection. Specified for operation over a −40°C to +150°C junction temperature and housed in a compact 10-pin VQFN-HR (3 × 3 mm) package. #TexasInstruments #TPS56837RPAR #TPS56837 #BuckConverter #SynchronousBuck #DCDCConverter #PowerManagement #PointOfLoad #IndustrialElectronics #AutomotiveElectronics #VQFN10 #EmbeddedSystems

Surface-Mount Piezo Audio Transducer – Externally driven piezoelectric audio transducer designed for audible alerts, alarms, user notifications, medical devices, consumer electronics, and embedded systems. Operates at a 3 Vp-p rated drive voltage with an operating voltage range of 1 to 25 Vp-p, producing a minimum sound pressure level of 70 dBA at 10 cm with a 4 kHz ±500 Hz resonant frequency. Features 1 mA maximum current consumption, 12,000 pF ±30% capacitance, top sound port, and surface-mount (SMD) construction with 9 × 9 × 2.4 mm dimensions. Supports reflow soldering, utilizes an LCP housing with tin-plated brass terminals, and is specified for operation over a −30°C to +85°C temperature range. #PUIAudio #SMT0940T3VR #PiezoTransducer #PiezoBuzzer #AudioTransducer #SMDBuzzer #Alarm #AudibleIndicator #EmbeddedSystems #IndustrialElectronics #ConsumerElectronics #MedicalDevices

Ultra-Low IQ Synchronous Buck DC-DC Converter – 300 mA synchronous step-down (buck) switching regulator for high-efficiency industrial, automotive, battery-powered, and embedded power applications. Operates from a 3 V to 65 V input voltage, provides an adjustable output voltage from 1.0 V to 65 V, and delivers up to 300 mA output current. Features 6 µA typical quiescent current, programmable switching frequency from 200 kHz to 2.2 MHz, 100% duty-cycle operation, synchronous rectification, Power Good (PG) output, enable input, soft-start, cycle-by-cycle current limiting, hiccup short-circuit protection, thermal shutdown, and undervoltage lockout (UVLO). Specified for operation over a −40°C to +150°C junction temperature range and housed in a 9-pin VQFN-HR (2 × 2 mm) wettable-flank package. #TexasInstruments #LMR36503RFRPER #LMR36503 #BuckConverter #SynchronousBuck #DCDCConverter #SwitchingRegulator #PowerManagement #UltraLowIQ #300mA #VQFN9 #EmbeddedSystems

Vertical RCA Phono Jack Connector – Single-port vertical RCA (phono) female jack for audio/video equipment, consumer electronics, amplifiers, multimedia devices, test equipment, and embedded audio applications. Features a through-hole PCB mount, mono (2-conductor) configuration, and 3.2 mm ID / 9.0 mm OD industry-standard RCA mating interface. Constructed with brass contacts and nickel plating for reliable electrical performance, it includes a board-lock feature for enhanced mechanical stability during soldering and use. The connector has a white insulator, solder termination, no internal switch, and operates over a −20°C to +85°C temperature range. #SameSky #RCJ023 #RCAJack #PhonoConnector #AudioConnector #ThroughHoleConnector #PCBConnector #MonoConnector #ConsumerElectronics #AudioEquipment #EmbeddedSystems

ARM® Cortex®-A53 Microprocessor IC i.MX8ML 2 Core, 64-Bit 1.8GHz 548-LFBGA (15x15) Application Processor for embedded multimedia and industrial systems, integrating dual Arm® Cortex®-A53 cores operating up to 1.8 GHz and a Cortex®-M4 real-time core up to 400 MHz. It supports LPDDR4/DDR4/DDR3L memory, Gigabit Ethernet, PCIe, USB 2.0, MIPI-CSI/DSI, SAI audio interfaces, and 1080p video encode/decode, and is housed in a 0.8 mm pitch 486-ball FCBGA package. #ApplicationProcessor #NXP #iMX8MMini #ARMCortexA53 #CortexM4 #EmbeddedProcessor #MultimediaProcessor #FCBGA486 #LPDDR4 #DDR4 #PCIe #USB2 #GigabitEthernet #MIPI #SAI #EmbeddedSystems

Sealed Automotive Wire-to-Board Header Connector – 6-position rectangular male header designed for automotive wiring harnesses, off-highway vehicles, heavy equipment, industrial machinery, marine electronics, and rugged embedded systems. Part of the TE Connectivity DEUTSCH DT Series, it features a 2-row, 4.44 mm (0.175") pitch configuration with through-hole vertical PCB mounting for reliable wire-to-board connections in harsh environments. Rated for 13 A per contact and 250 VDC, it uses nickel-plated copper alloy contacts with glass-filled nylon (PA) housing, providing excellent durability and corrosion resistance. The connector includes a sealed 4-wall shrouded design, mounting flange, latch retention, and compatibility with DT04-6P mating connectors for secure, vibration-resistant connections. Suitable for −55°C to +125°C operation, it is ideal for demanding automotive and industrial applications. #TEConnectivity #Deutsch #DT156P #DTSeries #AutomotiveConnector #WireToBoard #SealedConnector #ThroughHoleConnector #IndustrialElectronics #HeavyEquipment #AutomotiveElectronics #EmbeddedSystems

MXM 3.0 Edge Card Connector – 314-position right-angle female edge card connector for MXM 3.0 graphics modules. Features a 0.50 mm pitch, dual-row contact arrangement, surface-mount solder termination, gold-plated copper alloy contacts (0.76 µm / 30 µin), and supports 1.20 mm card thickness. Includes board guides and solder retention features for improved mechanical stability. #Amphenol #AmphenolICC #FCI #10151114001TLF #MXM30 #EdgeCardConnector #BoardToBoard #GraphicsModuleConnector #314Position #0_5mmPitch #SurfaceMount #EmbeddedSystems

Shielded RJ45 Ethernet Connector – Single-port RJ45 (8P8C) shielded modular jack for 10/100Base-T Ethernet and networking applications. Features a right-angle through-hole PCB mount, Cat 5 performance, 8 loaded contacts, inverted latch (latch-up) orientation, and standard-profile side-entry design. Constructed with 15 µin gold-plated phosphor bronze contacts, a nickel-plated copper alloy shield, and a high-temperature thermoplastic housing (UL94 V-0). Includes PCB and panel grounding tabs, matte tin-plated solder tails, and is specified for operation over a −40°C to +85°C temperature range. Designed for Fast Ethernet (10Base-T and 10/100Base-T) applications. #TEConnectivity #AMP #14065415 #RJ45 #EthernetConnector #Cat5 #8P8C #ShieldedRJ45 #RightAngle #ThroughHole #Networking #EmbeddedSystems