Offline Flyback SMPS Transformer – Surface-mount flyback transformer optimized for offline AC-DC LED drivers and switch-mode power supplies (SMPS) using flyback converter topologies. Designed for 120 V to 375 V DC primary input, it features 800 µH primary inductance (at 10 kHz), 68 kHz to 100 kHz switching frequency, and 4500 Vrms reinforced isolation between primary and secondary windings for enhanced safety. Includes dual 5 V secondary windings (2 A each) and a 20 V auxiliary winding (configurable as 6 V + 14 V) for controller bias and feedback circuitry. Complies with IEC 61558-2-16 reinforced insulation requirements, operates over a −40°C to +125°C temperature range, and is housed in a compact EFD20 surface-mount package for high-density power supply designs. #WurthElektronik #750811611 #FlybackTransformer #SMPSTransformer #OfflinePowerSupply #ACDCConverter #LEDDriver #FlybackConverter #PowerTransformer #4500VrmsIsolation #EFD20 #EmbeddedSystems

Flyback Converters For For DC/DC Converters SMPS Transformer 4000Vrms Isolation Surface Mount XFMR FLYBACK DC/DC CONV 14UH SMD

Photorelay with a 1-Form-A (normally open) MOSFET output, designed for isolated solid-state switching applications. It features a 200 V OFF-state output voltage, 200 mA ON-state current, 1 mA maximum trigger LED current, 8 Ω maximum ON-state resistance, 1500 Vrms minimum isolation voltage, and is housed in a 4-pin SOP (2.54SOP4) package. #Photorelay #MOSFETOutput #Optocoupler #1FormA #SolidStateRelay #Isolation #200V #200mA #SOP4 #ToshibaSemiconductor

Isolated Module DC DC Converter 1 Output 24V 6.3A 9V - 36V Input DC-DC converter designed to provide an isolated, regulated 24 V output from a 9–36 VDC input. It delivers up to 150 W (24 V, 6.3 A), features a 4:1 input range, 2.25 kVDC input-to-output isolation, remote on/off control, output trim of ±10%, and includes overcurrent, overvoltage, overtemperature, and short-circuit protection. #PowerSupply #DCDCConverter #IsolatedConverter #QuarterBrick #XPPower #150W #24VOutput #WideInput

AC-DC Enclosed PCB Power Supply Module – 90 W enclosed AC-DC power supply for industrial equipment, automation systems, instrumentation, IoT devices, and embedded power applications. Accepts a universal 85–305 VAC (120–430 VDC) input and provides a regulated 24 VDC output at 3.75 A with 90 W maximum output power. Features high efficiency up to 92%, low no-load power consumption (<0.1 W), Class II isolation, reinforced insulation, and 3 kVAC input-to-output isolation. Includes short-circuit, overload, overvoltage, and overtemperature protection, complies with IEC/UL/EN 62368-1 and IEC/EN 60335-1 safety standards, and operates over a −30°C to +70°C temperature range (with derating). Housed in a fully encapsulated PCB-mount package measuring approximately 87 × 52 × 29.5 mm. (meanwell.com) #MeanWell #IRM9024 #IRM90 #ACDCPowerSupply #PCBPowerModule #24VPowerSupply #90W #IndustrialPower #EmbeddedPower #PowerManagement #EncapsulatedPowerSupply #EmbeddedSystems

CONN MOD JACK RJ45 TH The HR911130A is a single-port RJ45 MagJack® Ethernet connector from HanRun Electronics with integrated Ethernet isolation magnetics and green/yellow status LEDs in a compact through-hole, right-angle package. Per the datasheet, it is designed for 100/1000Base-T Ethernet applications and meets or exceeds IEEE 802.3ab requirements, simplifying PCB layout by eliminating the need for external isolation transformers. Key Features Single-port RJ45 connector with integrated Ethernet magnetics Supports 100/1000Base-T Ethernet applications Integrated green/yellow link/activity LED indicators Shielded metal housing for improved EMI performance Through-hole, right-angle PCB mounting Compliant with IEEE 802.3ab Ethernet requirements 1500 Vrms isolation between UTP side and chip side Integrated 4 x 75 ohm termination network and 1000 pF / 2 kV capacitor shown in datasheet Reduces external component count and PCB space RoHS compliant Shield / mechanical notes: footprint pads 15 and 16 are plated through-hole shield/mechanical tabs; pads 17 and 18 are non-plated locating holes. The current schematic exposes pins 1-14 as electrical terminals; shield tabs 15/16 are documented as physical shield/mechanical tabs and are not exposed as separate schematic terminals. Ideal for routers, switches, embedded Ethernet devices, industrial control, IoT equipment, and other 100/1000Base-T network interfaces. #HR911130A #HanRun #RJ45 #MagJack #Ethernet #LAN #IntegratedMagnetics #NetworkConnector #PCB #EmbeddedSystems #IndustrialElectronics #IoT #ThroughHole #IEEE8023ab #1000BaseT

Flyback Converters For For DC/DC Converters SMPS Transformer 1500Vrms Isolation 50 ~ 200kHz Surface Mount #CommonPartsLibrary #transformer #Switching-converter #MID-FLYLT

Isolated Module DC DC Converter 1 Output 5V 400mA 4.5V - 12V Input More Details: The REM2A series by RECOM is a line of medical-grade regulated DC/DC converters designed for applications requiring high isolation and reliability. These converters offer a 2W isolated single and dual output with a 2:1 input voltage range, housed in a compact DIP16 or SMD package. Key features include reinforced isolation up to 5kVAC for 1 minute, meeting 2MOPP standards with a 250VAC working voltage and ≥8mm clearance and creepage distances. The series is certified to IEC/EN/UL 60601 and 62368-1 standards, ensuring compliance with stringent safety and EMC requirements. Operating efficiently across a wide temperature range from -40°C to +90°C without derating, the REM2A series supports a variety of input voltage ranges, including 4.5-12VDC, 9-18VDC, 18-36VDC, and 36-75VDC, with output voltages ranging from 3.3V to 24V. These converters feature protections such as under-voltage lockout, short circuit, and over-voltage protection, making them suitable for medical, industrial, and automation applications. The REM2A series is backed by a 3-year warranty, emphasizing its reliability and performance in demanding environments.

Hongfa Europe GMBH PCB Mount Power Relay, 5V dc Coil, 5A Switching Current, SPS The HF49FD/005-1H11TF is part of the Hongfa HF49FD series, which consists of compact, high-sensitivity power relays. It operates using a 5 V DC coil and provides electrical isolation between the control circuit and the load, allowing low-power signals (e.g., from a microcontroller) to switch higher voltages or currents. Key Characteristics Type: Electromagnetic relay (non-latching) Contact Configuration: SPST-NO (1 Form A, normally open) Coil Voltage: 5 V DC Switching Current: up to 5 A Switching Voltage: 250 VAC 30 VDC Mounting Type: Through-hole / PCB mount Size: ~20 × 5 × 12.5 mm (slim design) Coil Power Consumption: ~120 mW (low power) Dielectric Strength: up to 3 kV isolation Functional Overview Uses a coil + mechanical contacts: When 5 V is applied → coil energizes → contacts close When removed → contacts open Provides electrical isolation between: control side (low voltage) load side (higher voltage/current) #Relay

Isolated CAN FD Transceiver, Integrated DC-DC Converter, 5Mbps, Reinforced Isolation, SOIC-20W can transceiver isolated protected integrated isolated supply SOIC*7.5x12.8mm*P1.27mm*

Isolated Module DC DC Converter 1 Output 12V 13.4A 9V - 50V Input DCM3623T50T13A6T70 is a high-density, isolated, and regulated DC-DC converter module from Vicor, designed to efficiently convert a wide input voltage range into a stable 12V output. Utilizing Vicor's advanced ChiP™ packaging technology and Zero Voltage Switching (ZVS) topology, it delivers high efficiency, excellent thermal performance, and robust protection features, making it suitable for industrial, transportation, aerospace, and distributed power applications. Key Features Wide input voltage range: 9V to 50V DC Regulated 12V DC output Maximum output power: 160W Continuous output current up to 13.4A High efficiency up to 91.5% 2250V DC isolation between input and output High-frequency Zero Voltage Switching (ZVS) topology Integrated protections: Over-Voltage Protection (OVP) Over-Current Protection (OCP) Under-Voltage Lockout (UVLO) Short-Circuit Protection (SCP) Over-Temperature Protection (OTP) Compact 3623 Through-Hole ChiP® package Operating temperature range: -40°C to +125°C Suitable for industrial, process control, transportation, defense, and aerospace systems. #DCDCConverter #Vicor #PowerModule #IsolatedConverter #PowerElectronics #IndustrialAutomation #EmbeddedSystems #TransportationElectronics #AerospaceElectronics #HighEfficiencyPower #ChiPTechnology #DCM3623

Vicor DCM3623T75H13C2T00 isolated regulated DC/DC converter module. 36–75 Vdc input, 12 Vdc nominal output, 26.67 A / 320 W continuous output, up to 92.4% efficiency, 2250 Vdc input-to-output isolation, through-hole 3623 ChiP package, -40°C to +125°C T-grade internal operating temperature.

The TMS320F280049CPZQR is a 32-bit real-time microcontroller from Texas Instruments' C2000 Piccolo family, purpose-built for high-performance digital power control, motor control, and other real-time embedded control applications. The device is centered around TI's C28x digital signal processing core, a fixed- and floating-point architecture specifically optimized for the kind of fast, deterministic mathematical computation required in closed-loop control systems such as motor drives, digital power supplies, solar inverters, and electric vehicle subsystems. This particular part number represents the "C" variant within the TMS320F28004x family, which grants access to an integrated Configurable Logic Block, a flexible programmable logic resource that allows engineers to implement custom digital logic functions directly on-chip, such as specialized PWM waveform shaping, custom protocol interfaces, or glue logic that would otherwise require an external FPGA or discrete logic devices. This variant also provides access to a secure ROM library containing TI's InstaSPIN-FOC technology, a field-oriented motor control solution that significantly simplifies the development of sensorless motor control algorithms by handling much of the underlying control theory and tuning complexity in pre-validated, secure firmware. Beyond its core processing capabilities, the device integrates an extensive set of control-oriented peripherals that are characteristic of the C2000 platform, including high-resolution pulse-width modulation outputs, enhanced capture modules, and a multi-channel sigma-delta filter module that enables isolated current and voltage sensing across an isolation barrier without requiring a separate digital isolator and decoder chip. A dedicated Control Law Accelerator runs in parallel with the main processing core, offloading time-critical control loop calculations so that the main core remains free to handle communication, supervisory logic, and other system-level tasks, which is particularly valuable in systems running multiple simultaneous control loops. Connectivity on the device is supported through a broad set of industry-standard communication interfaces, allowing it to interface with a wide range of external sensors, communication networks, and host systems without requiring additional bridge components. The device also supports TI's Fast Serial Interface, a high-speed, robust communication protocol intended to simplify board-to-board and module-to-module communication in multi-controller systems, an increasingly common need in distributed power and motor control architectures. This part is qualified to automotive electronics reliability standards, making it suitable for deployment in vehicle power electronics, traction inverters, onboard chargers, and other automotive systems where component robustness, extended temperature operation, and rigorous quality screening are required. The device also supports TI's functional safety documentation framework, providing the architectural transparency and failure mode analysis resources needed by system designers building safety-critical control systems around the device. It is housed in a surface-mount package suited to dense power electronics board layouts and is supplied in tape-and-reel packaging for automated assembly. Spec Sheet Identification Part Number: TMS320F280049CPZQR Device Family: C2000 Piccolo, TMS320F28004x Manufacturer: Texas Instruments Variant: "C" type — with Configurable Logic Block and secure ROM/InstaSPIN-FOC access Functional Classification Device Type: 32-bit real-time microcontroller Core Architecture: C28x digital signal processing core Math Acceleration: Floating-Point Unit and Trigonometric Math Unit for control-loop computation Parallel Control Processing: Integrated Control Law Accelerator Programmable Logic: Configurable Logic Block (CLB) for custom digital logic functions Motor Control Library: Secure ROM with InstaSPIN-FOC sensorless field-oriented control Memory Program Memory Type: Embedded flash memory Memory Architecture: Supports field reprogramming for firmware updates and calibration data storage Control & Analog Peripherals PWM Capability: Frequency-independent, high-resolution PWM outputs Capture Module: Enhanced capture (eCAP) peripheral Isolated Sensing: Multi-channel sigma-delta filter module (SDFM) for isolated current/voltage sensing Analog Integration: Integrated high-speed analog-to-digital converters and internal digital-to-analog converters Programmable Gain: Integrated programmable gain amplifiers Communication Interfaces Standard Interfaces: SPI, SCI, I2C, LIN, and CAN connectivity Power Management Bus: Fully compliant PMBus support High-Speed Module Interface: Fast Serial Interface (FSI) for board-to-board and module-to-module communication Target Applications Application Domains: Industrial motor drives, solar inverters, digital power supplies, electric vehicle and transportation systems, sensing and signal processing Environmental & Qualification Automotive Qualification: AEC-Q100 qualified Functional Safety Support: Documentation and architecture support for functional safety-compliant system design Lifecycle Status: Active production Package Package Type: Surface-mount quad flat package style (LQFP) Mounting: Surface mount technology (SMT) Packaging Format Supply Format: Tape-and-reel, per part suffix designation #TMS320F280049 #C2000 #Piccolo #TexasInstruments #DigitalSignalController #RealTimeMCU #MotorControl #DigitalPowerControl #InstaSPINFOC #FieldOrientedControl #ConfigurableLogicBlock #AECQ100 #AutomotiveMCU #PowerElectronics #EmbeddedSystems #LQFP #SurfaceMount #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary

WE-LAN 10/100/1000 Base-T SMT Transformer 1 Port 1000BASE-T LAN transformer, SMD, 24pin, pitch 1.27mm, 0C to +70C, 1.5KVrms isolation, PoE+ 1100mA per centre tap

Power Over Ethernet (PoE) For For DC/DC Converters SMPS Transformer 1500Vrms Isolation Surface Mount #CommonPartsLibrary #Transformer #WE-PoE+

2-Channel Ultra-Low Clamp Voltage ESD Solution With Series-Resistor Isolation, SOT-23 ESD protection SOT?23*

4A Gate Driver RF Coupling 2500Vrms 1 Channel 8-SOIC Confirmed — this is a Skyworks (formerly Silicon Labs) Si827x-family isolated gate driver, single-channel, with deglitch and UVLO, in the "GBD" variant (3V UVLO threshold). Here's the spec. Engineering Specification — Si8271GBD-IS Manufacturer: Skyworks Solutions, Inc. (formerly Silicon Labs) Device Family: Si827x ISOdriver General Description The Si8271GBD-IS is a single-channel isolated gate driver integrated circuit manufactured by Skyworks Solutions, designed to drive power switching devices such as MOSFETs, IGBTs, and wide-bandgap SiC or GaN FETs in power conversion applications. The device uses Skyworks' proprietary silicon-based galvanic isolation technology rather than the optical isolation used in traditional optocoupler-based gate drivers, providing a more robust, longer-lasting, and more precisely matched isolation barrier between the low-voltage control circuitry and the high-voltage power switching stage. This isolation approach delivers several advantages over legacy optocoupler solutions, including significantly higher common-mode transient immunity, which allows the device to maintain reliable signal integrity even when subjected to the very fast voltage transients generated by high-speed switching in modern power converters. The device's high noise immunity prevents these switching-induced transients from corrupting the gate drive signal, eliminating a common failure mode in less robust isolated driver designs where fast edge rates can cause spurious switching or loss of control. The silicon isolation technology also provides tighter timing specifications, reduced timing variation across temperature and device lifetime, and better part-to-part matching than optocoupler-based alternatives, all of which contribute to more predictable and efficient power stage operation. The device includes an integrated de-glitch filtering circuit on its input, which screens out short noise spikes or unwanted transitions on the control input before they can be passed through to the gate drive output, improving overall system robustness in electrically noisy environments. Undervoltage lockout protection is built into the device, automatically disabling the gate drive output if the supply voltage falls below a safe operating threshold, protecting the driven power switch from being driven with insufficient gate voltage, which could otherwise lead to excessive conduction losses or device damage. The device also provides a dead-time programming feature, allowing designers to precisely tune the timing margin between switching transitions in half-bridge or similar topologies, helping to prevent shoot-through conditions while minimizing unnecessary dead time that would otherwise reduce converter efficiency. The Si8271GBD-IS operates from a wide input supply voltage range and supports drive voltages suitable for a broad range of gate drive requirements, making it adaptable to many different power switch types and converter topologies. It is built to operate reliably across a wide ambient temperature range, supporting use in demanding industrial, telecom, and renewable energy power conversion environments. The device is housed in a compact surface-mount package suited to dense power converter board layouts, and its construction reflects the long-life, high-reliability design philosophy that distinguishes silicon-isolation-based gate drivers from optocoupler-based alternatives. Spec Sheet Identification Part Number: Si8271GBD-IS Device Family: Si827x ISOdriver series Manufacturer: Skyworks Solutions (formerly Silicon Labs) Functional Classification Device Type: Single-channel isolated gate driver Isolation Technology: Proprietary silicon-based galvanic isolation Driven Device Types: MOSFETs, IGBTs, SiC FETs, GaN FETs Output Configuration: Separate pull-up/pull-down driver outputs Isolation & Noise Performance Isolation Withstand Voltage: High-voltage reinforced isolation rating per UL1577 and VDE0884 standards Common-Mode Transient Immunity (CMTI): High-performance CMTI rating for fast-switching robustness Input Filtering: Integrated de-glitch circuit for noise rejection Protection & Control Features Undervoltage Lockout (UVLO): Integrated UVLO fault protection with driver shutdown Dead-Time Control: Precision dead-time programmability via dedicated control pin Input Logic: TTL-level compatible input with wide noise-margin hysteresis Electrical Characteristics Input Supply Voltage Range: Wide-range low-voltage logic supply Drive Supply Voltage: Higher-voltage gate drive supply rail support Propagation Delay: Fast, tightly specified propagation timing Environmental & Qualification Operating Temperature Range: Extended industrial temperature range RoHS Compliance: Yes Lifecycle Status: Active production Package Package Type: Narrow-body small-outline surface-mount package (SOIC-8) Mounting: Surface mount technology (SMT) Packaging Format Supply Format: Tube or tape-and-reel packaging options #Si8271 #Si827x #Skyworks #SiliconLabs #IsolatedGateDriver #ISOdriver #GateDriverIC #MOSFETDriver #IGBTDriver #SiCFET #GaNDriver #PowerElectronics #GalvanicIsolation #CMTI #SOIC #SurfaceMount #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant

Metallic Case - 1 500 VDC Isolation, Hi-Rel DC-DC Converter The MGDS-04-J-C/M/S is a high-reliability 4 W isolated DC-DC converter module designed for demanding industrial, transportation, military, and aerospace applications. It belongs to the MGDS-04 series and features a 16–40 VDC input range (J input code), a regulated 5 VDC single output (C output code), and galvanic isolation between the input and output. The /S suffix indicates that the module undergoes screening and serialization for enhanced reliability and traceability, making it suitable for mission-critical systems. Key Features 4 W isolated DC-DC converter Wide 16–40 VDC input voltage range Regulated 5 VDC single output High-efficiency power conversion Input-to-output galvanic isolation Designed for industrial, defense, aerospace, and transportation applications Built-in protection features (including short-circuit protection) Compact encapsulated module for PCB mounting /S option provides screening and serialization for improved quality assurance and traceability #DCDCConverter #PowerModule #IsolatedPower #IndustrialElectronics #Aerospace #MilitaryElectronics #EmbeddedSystems #PowerSupply #HighReliability #PCBDesign