Transformer Model Asset Repair


Please fix this, based from this flag issue:
O part Würth 750811611 usado como T1 contém nó Model, mas sem asset/storageName/URL resolvido no read-back; portanto o corpo 3D não pode ser auditado. O footprint/pads permanece fonte de verdade e não foi movido para compensar.
I’ll repair the transformer’s 3D model reference, check its alignment against the existing footprint, and leave the pads unchanged.
Thought for 14 mins 16 sec
Thought for 14 sec
Created 2 tasks.
1/2 Restore a resolvable 3D model without changing the footprint or pads.

Restore a resolvable 3D model without changing the footprint or pads.

Verify the model reference and footprint alignment.

Thought for 10 sec
Awaiting 1 task
"Transformer Model Asset Repair" completed.
Fixed: I linked the verified official STEP model beneath the footprint and disabled the legacy root model; the active model now resolves to an auditable asset. I verified scale, seating, and lead alignment without changing any of the 12 pads—details are in Model Audit.
The vendor model omits a visible pin-1 marking, so that feature remains unverified; the footprint’s pad-1 location is confirmed.

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
PRI_1
1
Unspecified
PRI_2
2
Unspecified
PRI_3
3
Unspecified
AUX_1
4
Unspecified
AUX_2
5
Unspecified
AUX_3
6
Unspecified
SEC_1
7
Unspecified
SEC_2
8
Unspecified
NC_1
9
Unspecified
SEC_3
10
Unspecified
SEC_4
11
Unspecified
NC_2
12
Unspecified

750811611