Comparator Differential CMOS, MOS, Open-Collector, TTL 14-SOIC #CommonPartsLibrary #Integratedcircuit #Linearcomparator

Comparator General Purpose DTL, Open-Collector, Open-Emitter, RTL, TTL 14-SOIC #CommonPartsLibrary #Integratedcircuit #Linearcomparator

100V/2A Peak High-Frequency Half Bridge Driver with TTL Logic Inputs 16-QFN #CommonPartsLibrary #IntegratedCircuit #PowerManagement #GateDriver #HIP2101

High voltage half-bridge gate driver for GaN transistors Features • dV/dt immunity ±200 V/ns • Driver current capability: – 1.3/2.4 A source/sink typ @ 25 °C, 6 V – 5.5/6 A source/sink typ @ 25 °C, 15 V • Separated turn on and turn off gate driver pins • 45 ns propagation delay with tight matching • 3.3 V, 5 V TTL/CMOS inputs with hysteresis • Interlocking function • UVLO on low-side and high-side sections • Dedicated pin for shut down functionality • Over temperature protection Applications • High-voltage PFC, DC-DC and DC-AC converters • Switch-mode power supplies • UPS systems • Solar power • Motor driver for home appliances, factory automation and industrial drives. #CommonPartsLibrary #IntegratedCircuit #powermanagement

6 to 50 V, Triple half-bridge gate driver with programmable currents and SPI configuration Motor Driver NMOS SPI 48-VFQFPN (6x6) STDRIVE102BP is a highly integrated triple half-bridge gate driver designed for driving 3-phase brushless DC (BLDC) motors. It can control six external N-channel MOSFETs with programmable gate drive currents, enabling optimized switching performance and reduced EMI. The device features SPI-configurable settings, integrated charge pump circuitry for 100% high-side duty-cycle operation, built-in voltage regulators, programmable analog front-end blocks, and comprehensive protection mechanisms, making it suitable for battery-powered motor control applications such as power tools, vacuum cleaners, e-bikes, robotics, and industrial automation. Key Features Triple half-bridge gate driver for 3-phase BLDC motor control Operating supply voltage range: 6 V to 50 V Programmable gate drive capability up to: 1 A source current 2 A sink current Integrated charge pump supporting 100% high-side duty cycle Embedded 12 V LDO regulator for gate-drive circuitry Embedded 3.3 V LDO regulator for low-voltage circuitry SPI-configurable parameters and diagnostic functions Up to three programmable-gain amplifiers (PGAs) Up to three high-speed comparators VDS monitoring for MOSFET protection Thermal shutdown protection Undervoltage lockout (UVLO) protection Dual control modes (ENx/INx or INHx/INLx) TTL-compatible logic inputs up to 5 V Ultra-low standby current consumption (<50 nA) Matched propagation delay across all channels #CommonPartsLibrary #IntegratedCircuit #STDRIVE102BP #STMicroelectronics #GateDriver #BLDCMotor #MotorControl #ThreePhaseMotor #MOSFETDriver #PowerTools #Robotics #IndustrialAutomation #EBike #SPI #BrushlessMotor #EmbeddedSystems #PowerElectronics

Single Non-Inverting 3-State Buffer IC – Single non-inverting CMOS buffer with a 3-state output and TTL-compatible inputs for signal buffering, bus interfacing, memory address/data buses, digital logic control, and embedded systems. Operates from a 4.5 V to 5.5 V supply and features 8 mA source/sink output drive capability, active-low output enable (OE), and high-impedance output mode for shared bus applications. Provides high-speed operation with a typical propagation delay of 8.5 ns, low power CMOS operation, latch-up performance exceeding 250 mA, and ESD protection compliant with HBM and CDM standards. Specified for operation over a −40°C to +125°C temperature range and housed in a compact 5-pin SOT-23 (DBV) surface-mount package. #TexasInstruments #SN74AHCT1G125DBVR #SN74AHCT1G125 #LogicBuffer #TriStateBuffer #BusBuffer #TTLCompatible #CMOSLogic #SignalBuffer #DigitalLogic #SOT23 #EmbeddedSystems

The 'must have' IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at 3V and communicating with 5V logic.

High-Speed Logic Output Optocoupler – Single-channel high-speed optocoupler designed for digital signal isolation, industrial automation, PLCs, motor drives, switching power supplies, data communication, microcontroller interfaces, and embedded control systems. Features an open-collector TTL-compatible output with a 15 MBd data rate, 5 kVrms isolation voltage, and 10 kV/µs minimum common-mode transient immunity (CMTI) for reliable operation in noisy electrical environments. Provides 75 ns maximum propagation delay, 22 ns typical rise time, 6.9 ns typical fall time, and supports up to 50 mA output current. The input consists of a GaAs infrared LED with a 1.38 V typical forward voltage and 20 mA maximum forward current. Operates from a 4.5 V to 5.5 V output-side supply, over a −40°C to +85°C temperature range, and is housed in a compact 8-pin SOIC (SMD) package for space-efficient PCB designs. #LiteOn #6N137STA1 #6N137 #Optocoupler #LogicOptocoupler #DigitalIsolation #HighSpeedIsolation #IndustrialAutomation #MotorDrive #PLC #EmbeddedSystems

8-Channel High-Side Source Driver Array – High-voltage, high-current source driver IC designed for LED and lamp driving, relay control, solenoid driving, industrial automation, printers, automotive electronics, PLCs, and embedded control systems. The Allegro UDN2981A integrates eight non-inverting high-side Darlington transistor outputs, allowing direct interfacing between TTL/CMOS logic and higher-voltage loads. Each output can source up to 500 mA, with an output voltage capability of up to 50 V, making it ideal for driving inductive and resistive loads. Features integrated input resistors, output clamp diodes for inductive load protection, and TTL/5 V CMOS-compatible inputs, simplifying circuit design and reducing external component count. Operates from a 4.75 V to 15 V logic supply, over a −20°C to +85°C temperature range, and is housed in an 18-pin DIP (through-hole) package for easy PCB integration. #Allegro #UDN2981A #HighSideDriver #SourceDriver #DarlingtonArray #RelayDriver #SolenoidDriver #LEDDriver #IndustrialAutomation #EmbeddedSystems #PowerDriver #TTLCompatible

Fiber Optic Receiver Optical 3V ~ 5.5V PLR237/T10BK is a low-power, through-hole fiber-optic receiver that converts 650 nm optical NRZ signals into a TTL-compatible digital output. It operates from 3.0–5.5 V and supports data rates up to 25 Mb/s with receiver sensitivity down to −27 dBm. #Photointerrupter #TransmissiveSensor #OpticalSensor #InfraredSensor #Phototransistor #ThroughHole #Everlight #PCBComponent

Buffer, Non-Inverting 1 Element 1 Bit per Element 3-State Output SOT-23-5 Single non-inverting tri-state buffer with a 3-state output, designed to buffer or isolate digital logic signals in automotive applications. It operates from a 4.5 V to 5.5 V supply, accepts TTL-compatible input levels, features an active-low output enable (OE), supports drive capability up to ±8 mA, and is specified for operation over a –40°C to +125°C temperature range in a SOT-23 (DBV) package. #LogicBuffer #TriStateBuffer #Automotive #AHCT #SingleGate #SOT23 #TexasInstruments

32-Segment CMOS LCD Driver, CMOS and TTL-compatible inputs, VDD +3.0V to +8.5V, DIP-40 driver display DIP*W15.24mm*

DC/DC Switching Regulator, configurable as a boost, buck-boost, SEPIC, flyback, or inverting converter with a 5 V to 32 V input voltage range, up to 60 V output switch voltage, 4 A maximum switching current, and 400 kHz fixed switching frequency. Features current-mode control, an adjustable 1.25 V feedback reference, integrated power MOSFET, soft-start, current limiting, thermal shutdown, and TTL-compatible enable input. #DCDCConverter #SwitchingRegulator #BoostConverter #BuckBoostConverter #SEPICConverter #FlybackConverter #InvertingConverter #CurrentMode #400kHz #4A #60V #TO2635L #XLSEMI #XL6009E1

75 Mhz Gigatron-Similar TTL/CMOS Computer

Buffers / Drivers SN74HCT125DRE4 SOIC-14_L8.6-W3.9-P1.27-LS6.0-BL LCSC Part Number: C2675588 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments SN74HCT125/SN54HCT125 quadruple bus buffer IC with 3-state outputs, contains four independent non-inverting buffers with TTL-compatible inputs, positive logic function Y=A, 4.5V to 5.5V operating voltage range, high-current outputs capable of driving up to 15 LSTTL loads, ±6mA output drive at 5V, low input current, typical 12ns propagation delay, suitable for bus line driving, memory address buffering and digital logic interface applications, available in SOIC-14 and PDIP-14 packages. Search Keywords: SN74HCT125, SN54HCT125, Texas Instruments SN74HCT125, TI SN74HCT125, SN74HCT125 buffer, 74HCT125 buffer, quad bus buffer, quadruple bus buffer, 3-state buffer IC, tri-state buffer IC, non-inverting buffer IC, TTL-compatible CMOS buffer, HCT logic buffer, bus line driver, memory address buffer, SN74HCT125D, SN74HCT125N, SOIC-14 buffer, PDIP-14 buffer, SN74HCT125 datasheet Hashtags: #SN74HCT125 #SN54HCT125 #74HCT125 #TexasInstrumentsSN74HCT125 #TIBufferIC #BusBuffer #QuadBusBuffer #TriStateBuffer #3StateBuffer #NonInvertingBuffer #HCTLogic #TTLCompatibleInput #LogicBufferIC #BusLineDriver #AddressBuffer #SOIC14 #PDIP14

UCC27211ADRMR VSON-8_L4.0-W4.0-P0.80-TL-EP LCSC Part Number: C1848363 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments UCC27211 120V half-bridge gate driver for two N-channel MOSFETs in high-side and low-side configuration, 3.7A source and 4.5A sink peak output currents, integrated 120V bootstrap diode, 8V to 17V VDD operating range, TTL-compatible independent inputs, input pins tolerate -10V to 20V, fast 20ns typical propagation delay, 7.2ns rise and 5.5ns fall time with 1000pF load, 4ns delay matching, symmetrical UVLO protection for high-side and low-side drivers, -40°C to +150°C operating temperature, available in SOIC-8, PowerPAD SOIC-8 and WSON-10 packages. Search Keywords: UCC27211, Texas Instruments UCC27211, TI UCC27211, UCC27211 half bridge driver, UCC27211 gate driver, UCC27211 MOSFET driver, 120V half bridge gate driver, 3.7A 4.5A gate driver, high side low side driver, N-channel MOSFET driver, UCC27211 SOIC-8, UCC27211 PowerPAD, UCC27211 WSON-10, UCC27211 8V UVLO, UCC27211 bootstrap diode, UCC27211 datasheet Hashtags: #UCC27211 #TexasInstrumentsUCC27211 #TIGateDriver #HalfBridgeDriver #HalfBridgeGateDriver #MOSFETDriver #NChannelMOSFETDriver #HighSideLowSideDriver #120VGateDriver #3A7GateDriver #4A5GateDriver #BootstrapDiodeDriver #UVLODriver #TTLInputDriver #SOIC8 #PowerPADSOIC8 #WSON10

5V low-power CMOS SRAM memory, organized as 2K x 8 bits, with 90 ns access time, TTL-compatible inputs/outputs, asynchronous static operation, standby low-power mode, and battery backup support. DIP-24 package. Keywords / Hashtags: 6116LA90DB, 6116LA-90DB, 6116 SRAM, 2Kx8 SRAM, 16Kbit SRAM, STK 6116 / 6116 SRAM DIP-24, CMOS SRAM, low power SRAM, 5V SRAM, asynchronous SRAM, DIP-24 SRAM, Renesas SRAM, #6116LA90DB #6116SRAM #CMOSSRAM #2Kx8SRAM #16KbitSRAM #LowPowerSRAM #5VSRAM #DIP24 #RenesasThe 6116 5V CMOS SRAM is organized as 2K x 8. The 6116 offers a reduced power standby mode.The low-power (LA) version also offers a battery backup data retention capability where the circuit typically consumes only 1uW to 4uW operating off a 2V battery. All inputs and outputs are TTL-compatible. Fully static asynchronous circuitry is used, requiring no clocks or refreshing for operation. Military grade product is available.