Part Datasheet Audit

A

adrian95

can you group together pins by their functions?
for example for Power, 3v3, gnd_1 gnd_2 etc
NOTE: If you group them, can you not add the same pin if you already added them in a group? You should know which pin function is common for its function.

flux

Yes. I’ll assign each pin to exactly one broad functional group, keep Section equal to Pin Group, and use consistent orientation/order: Power, Ground, LED Input, Output, Control, and No Connect.

flux

Completed the full audit and grouped all eight pins exclusively by function: Power, Ground, LED Input, Output, Control, and No Connect. Pin numbering, descriptions, electrical types, and footprint-pad mappings all match the Lite-On datasheet.
Open items
  • The existing Datasheet URL is populated, so it was not replaced, but the Mouser link currently returns 404; the official Lite-On PDF is available at https://optoelectronics.liteon.com/upload/download/DS70-2008-0035/6N137-L%20series.pdf
  • Footprint pitch and body dimensions match. However, the footprint name indicates a 4.60 mm package height, while the datasheet specifies 3.50 ± 0.50 mm.
  • The STEP model height could not be numerically verified.
  • Key specs: 15 MBd, open-collector output, 5 kVrms isolation, 10 kV/µs minimum CMTI, 2.7–3.6 V or 4.5–5.5 V supply, −40°C to +85°C.
Suggested next steps
  1. Replace the stale Datasheet URL with the official Lite-On URL.
  2. Correct the footprint package-height naming/metadata.
  3. Visually verify the STEP model against the footprint and datasheet outline.
Fix datasheet and metadata
Update datasheet URL
Fix package height
Verify STEP model
Run part review
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Pin Description
NC_1
1
Not Connected
No Connect
No Connect
Left
1
No internal connection
ANODE
2
Input
LED Input
LED Input
Left
1
LED anode
CATHODE
3
Passive
LED Input
LED Input
Left
2
LED cathode
NC_2
4
Not Connected
No Connect
No Connect
Left
2
No internal connection
GND
5
Ground
Ground
Ground
Bottom
10
Output-side ground
VO
6
Open Collector
Output
Output
Right
1
Open-collector output
VE
7
Input
Control
Control
Right
1
Enable/strobe input
VCC
8
Power In
Power
Power
Top
1
Output-side supply

6N137S-TA1