This SN65HVD230DR-based reference design is a CAN bus transceiver circuit that facilitates robust data communication across the CAN network. The design incorporates a variety of capacitors and resistors to maintain signal quality, and it employs a NUP2105L for voltage protection. This circuit is ideally suited for applications that need reliable data communication in automotive or industrial settings. #referenceDesign #Module #CANbus #interface #transceiverCircuit #SN65HVD230 #SN65HVD230DR #reusable #module #canbus #texas-instruments #sublayout

Single-Channel ESD Protection TVS Diode – Bidirectional transient voltage suppressor (TVS) diode for ESD protection of USB, GPIO, data lines, and other low-voltage high-speed interfaces. Features a 5.5 V reverse standoff voltage (VRWM), 6 V minimum breakdown voltage, 14 V maximum clamping voltage at 1 A, and ±30 kV IEC 61000-4-2 contact and air-gap ESD protection. Provides 6 A (8/20 µs) surge current capability, 12 pF typical capacitance, 100 nA maximum leakage current, and 0.4 Ω typical dynamic resistance. Operates over a −40°C to +125°C temperature range and is housed in a 2-pin SOT-523 (DYA) package. #TexasInstruments #TPD1E10B06DYAR #TPD1E10B06 #TVSDiode #ESDProtection #TransientVoltageSuppressor #CircuitProtection #USBProtection #GPIOProtection #SurgeProtection #SOT523 #EmbeddedSystems

This project is a reference design based on the BQ25895, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #Module #BQ25895 #ReferenceDesign #charger #BatteryManagement #reusable #module #bms #texas-instruments #sublayout

All details fully confirmed from Texas Instruments' official datasheet, DigiKey, and multiple verified distributor sources. Here's the complete spec. Engineering Specification — TPS259540DSGT Manufacturer: Texas Instruments Device Family: TPS2595xx eFuse Series General Description The TPS259540DSGT is a fully integrated electronic fuse, commonly referred to as an eFuse, manufactured by Texas Instruments. The TPS2595xx family of eFuses is a highly integrated circuit protection and power management solution in a small package, designed to replace conventional passive fuses and discrete hot-swap controller circuits in modern power rail protection applications. Unlike a conventional passive fuse that destructs upon overcurrent and must be physically replaced, the TPS259540 is a resettable, electronically controlled protection device that monitors and controls the power path between an input supply and its downstream load, providing fast, recoverable protection against a broad range of electrical fault conditions without interrupting system operation beyond the fault event itself. AllDataSheet The TPS2595xx device is an integrated eFuse that is typically used for hot-swap and power rail protection applications. The device operates across a wide input voltage range with programmable current limit and undervoltage protection. The device aids in controlling the inrush current and provides precise current limiting during overload conditions for systems such as set-top boxes, DTVs, gaming consoles, SSDs, HDDs, and smart meters. The device also provides robust protection for multiple faults on the sub-system rail. Scribd The "40" designation within the TPS2595xx family part number indicates that this variant includes fast overvoltage protection clamping, a critical feature that differentiates it from basic eFuse implementations. Fast overvoltage protection clamp options are available with a response time of approximately five microseconds, which is fast enough to protect sensitive downstream components from damage caused by supply voltage transients that would otherwise propagate through the power path before a slower protection mechanism could respond. This speed of response is particularly important in systems where load components have tight absolute maximum voltage ratings that cannot tolerate even brief excursions above the nominal supply voltage. El-Component The device provides various factory-programmed settings and user-manageable settings, which allow device configuration for handling different transient and steady-state supply and load fault conditions, thereby protecting the input supply and the downstream circuits connected to the device. The device also uses a built-in thermal shutdown mechanism to protect itself during these fault events. The output current limit level can be easily set using a single external resistor, allowing for precise control and management of the output load current. Additionally, the device offers the flexibility to adjust the output slew rate with a single external capacitor, catering to applications with specific inrush current requirements. ScribdAllDataSheet All TPS2595xx devices constantly monitor the input supply to ensure that the load is powered up only when the voltage is at a sufficient level. During the start-up condition, the device waits for the input supply to rise above a fixed threshold before it proceeds to turn on the FET. Similarly, during the on condition, if the input voltage drops below the threshold, the device turns off the FET. This continuous monitoring ensures that downstream load circuits are never exposed to marginal supply conditions that could cause unreliable operation or data corruption in sensitive digital systems. Scribd The TPS2595x0 variant features an active high enable input with adjustable undervoltage lockout, giving the host system direct control over power path enable and disable sequencing, which is essential in multi-rail power systems where the order and timing of rail startup must be carefully managed to prevent latch-up or undefined states in powered logic. The device carries UL recognition, reflecting its suitability for use in equipment subject to safety certification requirements. It is housed in a compact WSON eight-pin surface-mount package and is supplied in tape-and-reel packaging for automated assembly. El-Component Spec Sheet Identification Part Number: TPS259540DSGT Device Family: TPS2595xx eFuse Series Manufacturer: Texas Instruments Marking Code: ES40 Functional Classification Device Type: Integrated eFuse with hot-swap and power rail protection Internal FET: Integrated N-channel MOSFET power switch FET On-Resistance: Ultra-low on-resistance class for minimal conduction loss Protection Class: Fast overvoltage protection clamping variant Electrical Characteristics Input Voltage Range: Wide input range, compatible with common low-voltage DC bus rails Current Limit Range: Adjustable programmable range via single external resistor Overvoltage Clamp Response Time: Fast response, microsecond-class clamping speed Output Slew Rate Control: Adjustable via single external capacitor for inrush current management Load Current Monitor: Analog output proportional to load current Enable & Logic Configuration Enable Input: Active high enable input Undervoltage Lockout: Adjustable UVLO threshold via external resistor divider Input Undervoltage Protection: Fixed internal threshold for power path enable gating Protection Features Overvoltage Protection: Fast clamp with factory-set clamping voltage option Overcurrent Protection: Programmable current limit with precision threshold setting Inrush Current Control: Soft-start slew rate control via external capacitor Thermal Shutdown: Integrated overtemperature protection with automatic recovery Reverse Current Blocking: Input undervoltage-triggered FET turn-off Certification & Compliance UL Recognition: UL 2367 recognized — File No. E169910 Export Classification: EAR99 RoHS Compliance: Yes Target Applications Hot-swap power path management Power rail protection for set-top boxes, gaming consoles, and smart meters SSD and HDD power management Digital TV and consumer AV subsystem power protection Industrial multi-rail power sequencing IoT and embedded system power protection Package Package Type: WSON — Small Outline No-Lead, eight-pin Package Designation: DSG suffix Mounting Method: Surface mount technology (SMT) Packaging Format Supply Format: Tape-and-reel — DSGT suffix #TPS259540 #TPS2595xx #TexasInstruments #eFuse #HotSwap #PowerRailProtection #OvervoltageProtection #CurrentLimit #InrushControl #PowerManagement #WSON #SurfaceMount #IntegratedFET #CircuitProtection #PowerSequencing #SmartPower #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #ULRecognized

This project is a reference design based on the BQ24295, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #Module #BQ24295 #ReferenceDesign #charger #BatteryManagement #reusable #module #bms #texas-instruments #sublayout

This ISO1042BDWR-based reference design is a CAN bus transceiver circuit, providing reliable data communication over the CAN network. The design features a range of capacitors and resistors to ensure signal integrity, and a NUP2105L for voltage protection. It's ideal for applications requiring reliable data communication in an automotive or industrial environment. #Module #CANbus #interface #transceiverCircuit #ISO1042 #ISO1042BDWR #reusable #module #canbus #texas-instruments #sublayout

This project is a reference design based on the BQ25606, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #Module #BQ25606 #ReferenceDesign #charger #BatteryManagement #reusable #module #bms #texas-instruments #sublayout

This is a module boost DC-DC Regulator with 12V 0.3A(1.2A) output and 5V input voltage #ti #ledpower #led #boost #reusable #module #powermanagement #texas-instruments #sublayout

This is a module of a TPS61085-based voltage booster with an output voltage of 12V 0.3A #boost #power #dcdc #ti #reusable #module #powermanagement #texas-instruments #sublayout

OR Controller N+1 ORing Controller N-Channel 1:1 24-VQFN (4x4) The LM74930-Q1 ideal diode controller drives and controls external back to back N-Channel MOSFETs to emulate an ideal diode rectifier and power path ON and OFF control with over current and overvoltage protection. The wide input supply of 4 V to 65 V allows protection and control of 12-V and 24-V automotive battery powered ECUs. The device can withstand and protect the loads from negative supply voltages down to –65 V. An integrated high side gate control (HGATE) drives the first MOSFET in the power path. The device allows load disconnect (ON and OFF control) in case of overcurrent, overvoltage and undervoltage event using HGATE control while ideal diode controller (DGATE) drives a second MOSFET to replace a Schottky diode for input reverse polarity protection and output voltage holdup by blocking the reverse current from output to input. The device has integrated current sense amplifier which provides with an adjustable overcurrent and short circuit protection with circuit breaker functionality. The device features an adjustable overvoltage and undervoltage protection feature to protect against supply transients. LM74930-Q1 features MODE pin which can be used to selectively enable or disable reverse current blocking functionality. Features • AEC-Q100 qualified for automotive applications – Device temperature grade 1: –40°C to +125°C ambient operating temperature range • 4-V to 65-V input range • Reverse input protection down to –65 V • Drives external back-to-back N-Channel MOSFETs in common source configuration • Ideal diode operation with 10.5-mV A to C forward voltage drop regulation • Low reverse detection threshold (–10.5 mV) with fast DGATE turn-off response (0.5 µs) • 18-mA peak gate (DGATE) turn on current • 2.6-A peak DGATE turn-off current • Adjustable overcurrent and short circuit protection • Analog current monitor output with 10% accuracy (IMON) • Adjustable overvoltage and undervoltage protection • Low 2.5-μA shutdown current (EN=Low) • MODE pin to allow bi-directional current flow (MODE=Low) • Meets automotive ISO7637 transient requirements with a suitable TVS diode • Available in space saving 24-pin VQFN package 2 Applications • 12-V / 24-V automotive reverse battery protection • Industrial transport • Redundant power supply ORing #IdealDiodeController #SurgeStopper #CircuitBreaker #PowerPathProtection #AutomotiveElectronics #AECQ100 #ReversePolarityProtection #OvercurrentProtection #TexasInstruments #PMIC

This is a module of high efficiency synchronous step-down dc-dc converters optimized for battery powered portable applications. #power #dcdc #ti #buck #reusable #module #powermanagement #texas-instruments #sublayout

Automotive Nano-Power Precision Window Watchdog Timer – Automotive-grade precision window watchdog timer for automotive ECUs, ADAS, industrial controllers, safety-critical embedded systems, and microcontroller supervision. Operates from a 1.04 V to 6.0 V supply with an ultra-low 250 nA typical quiescent current, making it ideal for always-on and battery-powered applications. Features a programmable precision window watchdog with ±10% timing accuracy, factory-programmed or capacitor-programmable watchdog timeout (1 ms to 100 s), programmable reset delay (2 ms to 10 s), watchdog startup delay, open-window to close-window ratio selection (1× to 511×), manual reset (MR) support, latched or non-latched fault output, and open-drain active-low watchdog output for reliable system monitoring. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient temperature range and is housed in a compact 8-pin TSOT-23 (DDF) package. #TexasInstruments #TPS3436BFACADDFRQ1 #TPS3436Q1 #WatchdogTimer #WindowWatchdog #SupervisorIC #SystemMonitor #FunctionalSafety #AutomotiveElectronics #AECQ100 #TSOT238 #EmbeddedSystems

Automotive 80 V, 2 A Synchronous Buck Converter IC – Automotive-grade synchronous step-down (buck) DC-DC converter optimized for automotive power supplies, industrial automation, battery-powered systems, distributed power, and embedded applications. Operates from a 4.2 V to 80 V input voltage and provides an adjustable output voltage from 1 V to 75 V with up to 2 A continuous output current. Features an integrated high-side and low-side MOSFET, 200 kHz to 2.2 MHz programmable switching frequency, 40 µA typical quiescent current, 98% maximum duty cycle, forced PWM/light-load efficiency modes, spread-spectrum EMI reduction, frequency synchronization, power-good output, fixed soft-start, and pre-biased startup. Includes comprehensive protection with cycle-by-cycle current limiting, hiccup-mode short-circuit protection, thermal shutdown, and undervoltage lockout (UVLO). Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient (−40°C to +150°C junction) temperature range and is housed in an 8-pin SO PowerPAD (HSOIC) package. #TexasInstruments #LMR38020FSQDDARQ1 #LMR38020Q1 #BuckConverter #SynchronousBuck #DCDCConverter #PowerManagement #AutomotiveElectronics #AECQ100 #SIMPLESWITCHER #HSOIC8 #EmbeddedSystems

Electronic Fuse Regulator 4A 8-WSON (2x2) eFuse providing input power-path protection with adjustable current limiting and fast overvoltage protection for 3 V to 18 V input supplies, supporting 0.5 A to 4 A load current. The TPS259535DSGR features 34 mΩ typical on-resistance, a 5.7 V typical output overvoltage clamp, auto-retry after thermal shutdown, active-high enable with adjustable UVLO, and quick output discharge, all in an 8-pin WSON package. #TexasInstruments #TPS259535DSGR #eFuse #PowerManagement #HotSwap #OvervoltageProtection #CurrentLimiting #UVLO #QuickOutputDischarge #WSON8

Single Non-Inverting 3-State Buffer IC – Single non-inverting CMOS buffer with a 3-state output and TTL-compatible inputs for signal buffering, bus interfacing, memory address/data buses, digital logic control, and embedded systems. Operates from a 4.5 V to 5.5 V supply and features 8 mA source/sink output drive capability, active-low output enable (OE), and high-impedance output mode for shared bus applications. Provides high-speed operation with a typical propagation delay of 8.5 ns, low power CMOS operation, latch-up performance exceeding 250 mA, and ESD protection compliant with HBM and CDM standards. Specified for operation over a −40°C to +125°C temperature range and housed in a compact 5-pin SOT-23 (DBV) surface-mount package. #TexasInstruments #SN74AHCT1G125DBVR #SN74AHCT1G125 #LogicBuffer #TriStateBuffer #BusBuffer #TTLCompatible #CMOSLogic #SignalBuffer #DigitalLogic #SOT23 #EmbeddedSystems

This is a BQ24070 li ion charging module created according to the manufacturer's recommendations. The board has a connector with pins for setting modes and 3 power connectors #reusable #module #bms #texas-instruments #sublayout

Automotive High-Side Load Switch IC – Single-channel high-side load switch optimized for automotive power distribution, ADAS, infotainment, body electronics, industrial control, and embedded power management. Operates from a 1.5 V to 5.5 V control supply and switches 0.8 V to 5.5 V load voltages, delivering up to 3 A continuous output current with an ultra-low 19 mΩ (typical) ON resistance for minimal power loss. Features controlled slew-rate switching to reduce inrush current, integrated quick output discharge (QOD), fixed current limiting, thermal shutdown, reverse current blocking (when disabled), and low quiescent current for efficient operation. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient temperature range and is housed in a compact 6-pin SOT-23 Thin (TSOT-23-6) package. #TexasInstruments #TPS22995HQDDCRQ1 #TPS22995 #LoadSwitch #HighSideSwitch #PowerDistribution #PowerManagement #CurrentLimiting #AutomotiveElectronics #AECQ100 #SOT236 #EmbeddedSystems

Automotive 8 A Synchronous Buck Converter IC – High-efficiency synchronous step-down (buck) DC-DC converter optimized for automotive power supplies, industrial automation, networking equipment, point-of-load regulation, and embedded power applications. Operates from a 4.5 V to 28 V input voltage and provides an adjustable output voltage from 0.6 V to 13 V with up to 8 A continuous output current. Features integrated high-side (20.4 mΩ) and low-side (9.5 mΩ) MOSFETs, D-CAP3™ control architecture for fast transient response, 45 µA typical quiescent current, selectable switching frequencies of 500 kHz, 800 kHz, or 1.2 MHz, pre-biased startup, power-good (PG) output, soft-start, frequency synchronization, and light-load Eco-mode™ operation for improved efficiency. Includes comprehensive protection with cycle-by-cycle current limiting, undervoltage lockout (UVLO), overvoltage protection (OVP), thermal shutdown, and hiccup-mode short-circuit protection. Specified for operation over a −40°C to +150°C junction temperature and housed in a compact 10-pin VQFN-HR (3 × 3 mm) package. #TexasInstruments #TPS56837RPAR #TPS56837 #BuckConverter #SynchronousBuck #DCDCConverter #PowerManagement #PointOfLoad #IndustrialElectronics #AutomotiveElectronics #VQFN10 #EmbeddedSystems

OR Controller P-Channel 1:1 SC-70-6 Ideal diode that provides reverse polarity protection and power path ORing with a low forward voltage drop. The Texas Instruments LM66100-Q1 operates from 1.5 V to 5.5 V, supports up to 1 A continuous current, features an 11 mΩ (typical) integrated MOSFET, includes reverse current blocking, overvoltage protection up to 6 V, and is offered in a 6-pin SC70 (DCK) package. #IdealDiode #PowerPathProtection #ReverseCurrentBlocking #ReversePolarityProtection #PowerORing #Automotive #TexasInstruments #LM66100Q1 #SC70 #1A #15Vto55V

BQ7961x-Q1 family (BQ79612-Q1, BQ79614-Q1, BQ79616-Q1, BQ79616H-Q1) are automotive-grade, functional safety-compliant battery monitoring and balancing ICs from Texas Instruments for high-voltage Battery Management Systems (BMS). The devices support 12, 14, or 16 series-connected lithium-ion battery cells and provide high-accuracy voltage measurements, integrated cell balancing, hardware protection, temperature monitoring, and isolated daisy-chain communication. Designed for hybrid and electric vehicles (HEV/EV) and energy storage systems (ESS), the BQ7961x-Q1 family supports ISO 26262 functional safety up to ASIL D, integrated diagnostics, redundant voltage measurement paths, configurable digital filtering, and stackable architectures for large battery packs. The family offers precise battery state monitoring, enhanced safety, and scalable BMS implementation for automotive and industrial energy storage applications. Search Keywords: BQ79612-Q1, BQ79614-Q1, BQ79616-Q1, BQ79616H-Q1, BQ7961x-Q1, Texas Instruments BQ79616, Battery Monitor IC, Battery Management System IC, BMS Controller, Automotive BMS, EV Battery Monitor, Cell Balancing IC, High Voltage Battery Monitor, ISO26262 ASIL-D, Automotive Battery Protection, Lithium Battery Monitor, Energy Storage BMS, Stackable Battery Monitor, Battery Pack Monitoring, Cell Voltage Measurement IC, Electric Vehicle Battery Management Hashtags: #BQ79612Q1 #BQ79614Q1 #BQ79616Q1 #BQ79616HQ1 #BQ7961xQ1 #TexasInstruments #BatteryManagementSystem #BMS #CellBalancing #BatteryMonitor #ElectricVehicle #EVBattery #EnergyStorage #LithiumBattery #AutomotiveElectronics #ISO26262 #ASILD #PowerElectronics #EmbeddedSystems #HardwareDesign BQ79612-Q1