Power Supply Controller Digital Power Monitor 10-VSSOP The INA228AIDGSR is a high-precision digital power monitor and current-sense amplifier designed for accurate measurement of shunt voltage, bus voltage, current, power, energy, and charge in DC power systems. The device integrates a low-offset differential amplifier with high-resolution analog-to-digital converters and supports bidirectional current sensing across a wide common-mode voltage range. Communication is provided through an I²C- and SMBus-compatible digital interface, enabling direct telemetry integration into embedded control and battery management systems. The device is optimized for high-accuracy power monitoring applications requiring low drift, low offset, and high dynamic range. Integrated mathematical computation functions reduce host processor overhead by internally calculating current, power, accumulated energy, and charge values. Programmable conversion timing and averaging modes allow optimization between measurement speed and noise performance. The INA228AIDGSR is suitable for server power distribution, industrial automation, telecom infrastructure, automotive subsystems, battery-powered equipment, and precision instrumentation requiring real-time power analytics and fault monitoring. Engineering Specification Device Type Digital power monitor with integrated current-sense amplifier and high-resolution ADC. Measurement Functions Supports measurement of: Differential shunt voltage Bus voltage Current Power Energy accumulation Charge accumulation Temperature through external sensing methods Current Sensing Supports bidirectional current measurements using an external shunt resistor with programmable calibration scaling. ADC Architecture Incorporates high-resolution delta-sigma analog-to-digital converters with programmable conversion time and averaging configuration. Interface Uses I²C- and SMBus-compatible serial communication interface with programmable device addressing. Voltage Monitoring Supports high-side and low-side sensing across a wide common-mode input voltage range suitable for multi-rail power systems. Accuracy Features Includes: Low input offset voltage Low offset drift Precision gain architecture High measurement linearity Integrated calibration engine Power Computation Internally computes: Instantaneous power Average power Energy accumulation over time Charge accumulation over time Alert and Protection Features Provides programmable alert functionality for: Overcurrent Undervoltage Overvoltage Power threshold violations Conversion-ready indication Operating Modes Supports: Continuous conversion mode Triggered conversion mode Low-power shutdown mode Package Information Supplied in a compact VSSOP surface-mount package suitable for automated PCB assembly and space-constrained applications. Temperature Range Designed for operation across industrial temperature environments suitable for embedded and power-management systems. Typical Applications Battery management systems Power supply monitoring Server and telecom power rails Industrial control systems DC energy metering Embedded power analytics Automotive electronics Portable instrumentation #commonpartslibrary #integratedcircuit #powermanagement #powersupplycontroller

Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3.5A SOT-23-6 Thin, TSOT-23-6 The LMR51635YFDDCR specification defines the engineering requirements for a synchronous step-down DC-DC converter integrated circuit designed for high-efficiency power regulation in embedded and industrial electronic systems. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure stable voltage conversion, efficient power management, and long-term operational reliability. The device is intended for use in industrial automation, telecommunications equipment, consumer electronics, test and measurement instruments, distributed power systems, and embedded applications requiring regulated low-voltage power rails from higher-voltage DC sources. It integrates high-performance switching circuitry to provide efficient voltage conversion while minimizing external component count and overall system power loss. Engineering Requirements The DC-DC converter shall be manufactured using qualified semiconductor fabrication processes and high-quality materials to ensure consistent electrical performance, low power consumption, and reliable long-term operation. The device shall maintain stable functionality under specified input voltage, output load, temperature, and environmental operating conditions. Electrical characteristics shall provide accurate output voltage regulation, high conversion efficiency, low output ripple, and fast transient response during load and input voltage variations. The converter shall maintain stable switching operation while supporting continuous and dynamic power delivery with minimal performance degradation. The integrated control architecture shall ensure reliable startup, controlled shutdown, and stable operation under varying load conditions. Built-in protection mechanisms shall support safe operation during abnormal conditions, including overload, overcurrent, thermal stress, and short-circuit events, thereby enhancing overall system reliability. Thermal performance shall support continuous operation within the specified junction temperature range while maintaining electrical integrity and long-term reliability. The package shall be suitable for automated surface-mount assembly and compatible with standard solder reflow manufacturing processes. Mechanical construction shall withstand thermal cycling, vibration, mechanical handling, and environmental exposure without degradation of electrical or mechanical performance. Workmanship shall be free from defects including contamination, package cracking, bond failures, lead deformation, or structural inconsistencies that could adversely affect device functionality or reliability. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical performance specifications, application guidelines, thermal characterization reports, qualification records, inspection reports, reliability data, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #DCDCConverter #BuckConverter #PowerManagement #PowerElectronics #EmbeddedSystems #IndustrialElectronics #VoltageRegulator #QualityAssurance #EngineeringDocumentation

Accelerometer X, Y, Z Axis ±2g, 4g, 8g 6.25Hz ~ 200Hz 12-LGA (2.2x2.3) The ADXL367BCCZ-RL7 is an ultra-low power, three-axis MEMS accelerometer developed by Analog Devices for motion sensing applications requiring extremely low energy consumption and high measurement stability. The device integrates precision acceleration sensing, embedded motion detection capabilities, and intelligent power management features within a compact surface-mount package suitable for portable and battery-operated systems. The accelerometer supports both I²C and SPI digital communication interfaces, enabling flexible integration with embedded processors, microcontrollers, and sensor hubs. Its architecture is optimized for continuous motion monitoring while maintaining exceptionally low current consumption, making it ideal for wearable electronics, asset tracking devices, medical monitoring equipment, industrial sensing systems, and Internet of Things platforms. The device incorporates embedded activity, inactivity, and wake-up detection functions that allow host processors to remain in low-power states until significant motion events occur. Integrated FIFO buffering and programmable interrupt functionality reduce processor overhead and improve overall system efficiency. The ADXL367BCCZ-RL7 is designed for robust operation across a wide operating temperature range and maintains high measurement accuracy with low noise and excellent long-term stability. The compact LGA package enables dense PCB layouts for space-constrained designs. Key Features Motion Sensing Three-axis digital accelerometer Selectable acceleration measurement ranges High-resolution motion detection Low noise sensing architecture Integrated temperature sensor Power Management Ultra-low power operation optimized for battery-powered systems Multiple operating and standby modes Autonomous motion-triggered wake-up capability Efficient duty-cycling support Digital Interfaces Supports SPI communication Supports I²C communication Programmable interrupt outputs Embedded FIFO data buffering Embedded Detection Functions Activity detection Inactivity detection Motion-triggered interrupt generation Autonomous wake-up monitoring Mechanical and Environmental Compact LGA surface-mount package High shock tolerance Wide operating temperature capability Suitable for portable and industrial environments Electrical Characteristics Supply Requirements Low-voltage digital supply operation Optimized for low-current embedded systems Stable operation across supported voltage range Sensor Performance High sensitivity stability Low offset drift Low output noise density Configurable output data rates Communication and Control Supported Interfaces SPI serial interface I²C serial interface Programmability Configurable measurement ranges Adjustable output data rates Programmable interrupt mapping FIFO configuration support Package Information Package Type LGA surface-mount package Mounting PCB surface mount compatible Suitable for automated assembly processes Typical Applications Wearable electronics Health and fitness monitoring Portable instrumentation Asset and condition monitoring Industrial sensing systems IoT sensor nodes Motion-activated devices Battery-powered embedded systems #commonpartslibrary #integratedcircuit #accelerometer #sensor

Pressure Sensor 203.05PSI (1400kPa) Absolute 24 b 8-SMD Module The MS580314BA01-00 is a high-resolution digital absolute pressure sensor module from TE Connectivity Measurement Specialties. It integrates a precision MEMS pressure sensing element, a 24-bit ΔΣ ADC, and factory-calibrated coefficients to provide highly accurate digital pressure and temperature measurements. The sensor supports both I²C and SPI communication interfaces, making it easy to interface with a wide range of microcontrollers while requiring minimal external components. It is designed for low-power, high-accuracy applications such as altimeters, depth measurement systems, weather monitoring, industrial pressure sensing, and portable instrumentation. Key Features Digital absolute pressure sensor with integrated MEMS sensing element High-resolution 24-bit ΔΣ ADC with factory calibration Supports I²C and SPI digital interfaces Pressure range up to 14 bar (1400 kPa / 203 psi) Supply voltage: 1.8 V to 3.6 V Integrated temperature measurement for compensation and monitoring Low power consumption, suitable for battery-powered devices Operating temperature range: −40°C to +85°C Excellent long-term stability with low hysteresis Compact 8-SMD module for surface-mount PCB assembly Requires few or no external components for operation #PressureSensor #MEMS #AbsolutePressure #DigitalSensor #24BitADC #I2C #SPI #LowPower #IndustrialElectronics #Altimeter #DepthMeasurement #WeatherMonitoring #TEConnectivity #SurfaceMount #EmbeddedSystems

Current Sense Amplifier 1 Circuit Single-Ended SOT-23-6 The INA187A3IDBVR is a precision high-side and low-side current sense amplifier designed for accurate bidirectional current measurement in power management, motor control, battery monitoring, and industrial sensing applications. The device integrates a matched precision gain stage optimized for shunt resistor voltage amplification while maintaining excellent common-mode rejection and low offset drift. It supports wide common-mode input voltages, enabling current monitoring across supply rails in automotive, industrial, and embedded systems. The amplifier features fast response characteristics, low quiescent current consumption, and a compact surface-mount package suitable for space-constrained designs. Engineering Specification Device Type Precision Current Sense Amplifier Manufacturer Texas Instruments Manufacturer Part Number INA187A3IDBVR Amplifier Configuration Current shunt monitor with fixed gain Gain Variant High fixed gain configuration optimized for low-value shunt resistor sensing Input Measurement Capability Bidirectional current sensing Common-Mode Voltage Range Supports high-side and low-side sensing across wide supply rails Input Offset Characteristics Low offset voltage with low temperature drift for accurate current measurement Bandwidth Performance Wide bandwidth suitable for dynamic load and transient current monitoring Response Time Fast settling and propagation performance for real-time current feedback systems Power Supply Requirements Single-supply operation compatible with low-voltage logic systems Output Type Analog voltage output proportional to sensed shunt voltage Common-Mode Rejection High common-mode rejection ratio for stable operation in noisy environments Temperature Performance Industrial operating temperature range with stable gain accuracy over temperature Protection Features Robust input structure designed for high common-mode environments Package Type SOT-23 surface-mount package Mounting Method Surface mount technology Typical Applications Battery management systems, power distribution monitoring, motor current feedback, DC/DC converter monitoring, industrial automation, telecom power systems, and embedded power diagnostics. #commonpartslibrary #integratedcircuit #currentsenseamplifier

Thermal Image Sensor 32H x 24V TO-39 # MLX90640ESF-BAB-000-TU Engineering Specifications **General Description** The MLX90640ESF-BAB-000-TU is a contactless infrared thermal imaging sensor manufactured by Melexis. It incorporates a microbolometer array that detects infrared radiation emitted by objects and converts the captured thermal energy into temperature data, enabling the creation of thermal images without physical contact. The device is designed for compact and cost-effective thermal imaging applications, offering high thermal sensitivity and accurate temperature measurement capabilities. It integrates a digital signal-processing engine, calibration data memory, and a digital communication interface, allowing direct connection to microcontrollers, embedded systems, and industrial monitoring equipment. The sensor provides real-time thermal mapping across its field of view and is suitable for applications involving human presence detection, predictive maintenance, industrial automation, smart building systems, medical screening, consumer electronics, robotics, and thermal monitoring solutions. Its factory calibration ensures stable performance throughout its operating life while minimizing external calibration requirements. **Engineering Specifications** **Manufacturer:** Melexis **Manufacturer Part Number:** MLX90640ESF-BAB-000-TU **Component Type:** Infrared thermal imaging sensor **Sensor Technology:** Microbolometer thermal sensor array **Measurement Method:** Non-contact infrared temperature sensing **Output Type:** Digital thermal image data **Communication Interface:** I²C-compatible serial interface **Temperature Measurement Capability:** Object temperature monitoring and thermal imaging **Thermal Imaging Function:** Real-time thermal map generation **Integrated Processing:** On-chip signal processing and calibration management **Calibration:** Factory calibrated with stored calibration parameters **Power Supply Configuration:** Single-supply operation **Power Consumption:** Optimized for low-power embedded applications **Refresh Rate:** Programmable thermal frame refresh operation **Thermal Sensitivity:** High-sensitivity infrared detection **Field of View Variant:** Wide-angle thermal imaging configuration **Accuracy Characteristics:** High-precision temperature measurement with integrated compensation algorithms **Memory Features:** Internal EEPROM for calibration coefficients **Operating Mode:** Continuous and programmable thermal acquisition **Data Output Format:** Digital temperature and thermal pixel information **Environmental Stability:** Designed for reliable operation across varying ambient conditions **Electromagnetic Compatibility:** Suitable for embedded and industrial electronic systems **Package Type:** Surface-mount package with infrared-transparent window **Mounting Style:** Surface mount technology **Package Construction:** Reflow-solderable assembly **Lead Finish:** Lead-free finish **Environmental Compliance:** RoHS compliant and halogen-free **Reliability Features:** Factory-tested and production-calibrated thermal imaging device **Typical Applications** Thermal cameras Human presence detection systems Occupancy monitoring Industrial predictive maintenance Electrical equipment inspection Smart building automation HVAC monitoring systems Medical screening devices Consumer electronics Robotics and autonomous systems Fire detection and prevention systems Industrial process monitoring Energy management systems Automotive thermal sensing applications Security and surveillance equipment #MLX90640 #MLX90640ESF #Melexis #ThermalSensor #InfraredSensor #ThermalImaging #Microbolometer #TemperatureSensor #IndustrialAutomation #EmbeddedSystems #IoT #PredictiveMaintenance #SmartBuilding #ThermalCamera #ElectronicComponents #EngineeringSpecifications

Battery Multi-Function Controller IC Lithium Ion/Polymer 32-VFQFPN (5x5) L9961 is part of a complete battery pack monitoring, balancing, and protecting system for Li-Ion and Li-Polymer cells in 3, 4 or 5 series configurations. The L9961 uses a high precision ADC to provide cell voltage, stack voltage and temperature conversion via external NTC. Voltage monitoring functions are cyclically performed with a programmable loop time. Stack current is also monitored via a high accuracy CSA, continuously running and performing also Coulomb counting. Cell balancing is available and can be simultaneously activated on all cells. IC configuration and information exchange for SOC/SOH estimation are performed via I2C peripheral. The IC also integrates a dual pre-driver programmable in both HS/LS configurations for driving pack relays. L9961 also implements battery pack fuse protection to prevent fire and explosion hazards. A 3.3 V regulator with a high current capability is available for supplying pack controller and other external circuitry in both standby and normal operation modes. The IC protects the battery pack against over/under voltage conditions and monitors for over/ under temperature. It also features protection against overcurrent (both directions) and short-circuit in discharge events. Safety-relevant configurations can be stored in the internal NVM to avoid re-programming the device at each wake-up. Features • 2 μA shipment - DEEP SLEEP mode current and 5 μA standby consumption (with VREG LDO active) standby consumption (with VREG LDO active) • Integrated 3.3 V VREG LDO for supplying MCU and LEDs • Measures cell voltage (3 to 5 cells), with over/undervoltage detection and balance undervoltage protection • 12-bit voltage measurement with maximum error of ±15 mV in the [1.5 – 4.5] V range, for -40 °C < TJ < 105 °C • Measures stack voltage, with over/under voltage detection and plausibility check vs. sum of cells • Measures pack temperature via NTC, with over/undertemperature detection • Ratiometric temperature measurement with ±0.8% max. gain error in the [0.2 – VREG] V range, for -40 °C < TJ < 105 °C • Measures battery current, with Coulomb counting, overcurrent (both directions) and short-circuit in discharge protection. • 16-bit signed current measurement with 0.1% full scale error at room temperature • I 2C peripheral for device programming and data transfers over I2C bus • Cell balancing supporting up to 70 mA per cell • Dual configurable HS/LS predriver for pack relay management • Pack fuse management • Embedded NVM for configuration parameters storage • High hotplug robustness Applications • Cordless power tools • Backup energy storage systems and UPS • Light electric vehicles (e-bikes, scooters, etc.) • Portable and semi-portable equipment • Medical equipment #L9961TR #BatteryManagement #BMS #LiIonBattery #LiPoBattery #STMicroelectronics #BatteryProtection #CellBalancing #CoulombCounting #PowerManagement #EmbeddedSystems #EnergyStorage #EBike #PowerTools #ElectronicsDesign

Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345-EP is an extended performance version of the ADXL345, which is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2 C digital interface. The ADXL345-EP is well suited for extended temperature range industrial and aerospace equipment. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Freefall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345-EP is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, enhanced plastic package. Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) Power consumption scales automatically with bandwidth User-selectable resolution from 10 to 13 bits 4 mg/LSB scale factor in all g ranges 32-sample FIFO minimizes host processor load Single tap, double tap, and free-fall detection Activity/inactivity monitoring Supply voltage range: 2.0 V to 3.6 V I/O voltage range: 1.7 V to VS SPI (3- and 4-wire) and I2C digital interfaces Flexible interrupt modes mappable to either interrupt pin Measurement ranges selectable via serial command Bandwidth selectable via serial command 10,000 g shock survival Pb free/RoHS compliant #commonpartslibrary #integratedcircuit #accelerometer

1000 pF ±10% 2000V (2kV) Ceramic Capacitor X7R 1808 (4520 Metric) ## Engineering Specification ## General Description The **C4520X7R3D102K130KE** is a TDK multilayer ceramic chip capacitor designed for high-voltage surface-mount applications. It uses X7R dielectric material and is suitable for circuits requiring stable ceramic capacitance, compact PCB mounting, and reliable high-voltage performance. The component is commonly used in power supplies, filtering circuits, coupling circuits, snubber networks, voltage multiplier circuits, and general electronic assemblies requiring a high-voltage MLCC solution. ## Device Identification Manufacturer Part Number: **C4520X7R3D102K130KE** Manufacturer: **TDK Corporation** Product Series: **C Series** Device Category: **Passive Electronic Component** Device Type: **Multilayer Ceramic Chip Capacitor** Capacitor Type: **Surface-Mount MLCC** Application Grade: **Commercial Grade** ## Functional Description The device functions as a fixed-value ceramic capacitor for energy storage, noise suppression, coupling, decoupling, and filtering applications. It is designed to provide capacitance in a compact surface-mount package while supporting high-voltage operation. The X7R dielectric provides usable capacitance stability across a wide operating temperature range, making the component suitable for many general-purpose and power-related electronic designs. ## Electrical Description The capacitor has a nominal capacitance of **1000 pF** with **±10% tolerance** and a rated voltage of **2000 V DC**. It uses **X7R dielectric characteristics**, making it suitable for applications where moderate capacitance stability and high-voltage capability are required. The device should be operated within the manufacturer’s specified electrical limits to maintain reliability and performance. ## Mechanical Description The component is supplied in a **C4520 metric package**, equivalent to **EIA 1808** chip size. It is designed for surface-mount PCB installation using reflow soldering. The package includes soft termination construction, which helps reduce mechanical stress on the ceramic body and solder joints during board flexing or thermal cycling. ## Material and Construction Description The device is constructed as a multilayer ceramic capacitor using ceramic dielectric layers and internal electrode structures. The soft termination design improves board-level reliability by helping absorb mechanical strain between the PCB and capacitor body. This construction is useful in applications where vibration, thermal expansion, or board bending may affect component reliability. ## Mounting and Assembly Description The capacitor is intended for surface-mount assembly using reflow soldering. PCB land pattern, solder paste volume, component placement, and reflow profile should follow TDK recommendations. Proper spacing, voltage clearance, and creepage considerations should be applied because the component is used in high-voltage circuits. ## Application Suitability The **C4520X7R3D102K130KE** is suitable for high-voltage filtering, DC blocking, coupling, decoupling, power supply circuits, snubber circuits, inverter circuits, lighting equipment, industrial electronics, measurement equipment, and general PCB assemblies requiring a compact high-voltage ceramic capacitor. ## Design Considerations The design should account for rated voltage, capacitance tolerance, DC bias behavior, temperature characteristics, insulation resistance, soldering conditions, mechanical stress, board flex, creepage distance, and clearance distance. For high-voltage applications, PCB layout should provide adequate spacing and avoid contamination paths that may reduce insulation performance. The capacitor should not be used beyond the manufacturer’s specified electrical, thermal, or mechanical limits. ## Hashtags #commonpartslibrary #capacitor #ceramiccapacitor #mlcc #tdk #tdkcapacitor #cseries #c4520 #x7r #highvoltagecapacitor #smdcapacitor #surfacemount #passivecomponent #electronicparts #electronicscomponents #pcbdesign #hardwaredesign #powersupply #filteringcircuit #snubbercircuit #decouplingcapacitor #industrialelectronics #componentlibrary #engineeringparts #electronicsengineering

4 Channel AFE 12 Bit 36-WLCSP (2.8x2.56) The ADPD7000 is a highly integrated analog front end (AFE) designed for measuring various vital signals. The optical channel is designed as an optical transceiver, stimulating up to eight light emitting diodes (LEDs) and measuring the return signal on up to four separate current inputs. The signal chain rejects signal offsets and corruption from asynchronous modulated interference, typically from ambient light, eliminating the need for optical filters or externally controlled DC cancellation circuitry. The electrocardiography (ECG) signal acquisition is designed to support low noise, diagnostic level measurement in the presence of a variety of interferers. The ECG signal chain has a number of complementary features supporting ECG measurement, such as driven reference for common-mode rejection and lead off detection to identify a fallen electrode. The body impedance analysis (BIA) signal chain is designed for body impedance measurement with a configurable excitation path and measurement path. A 12-bit digital-to-analog converter (DAC) is used in the excitation path to generate the sinusoid wave and high precision measurement, with configurable filters used to measure the body response of the stimulus. The electrodermal activity (EDA) signal chain is designed for electrodermal activity. By multiplexing BIA and ECG peripheral circuits, the ADPD7000 supports high precision AC and DC measurement with 1 nS resolution. The data output and functional configuration use a serial port interface (SPI) on the ADPD7000. The control circuitry includes flexible LED signaling and synchronous detection, digital filters, digital wave generators, and configurable filters. The ADPD7000 is available in a 2.795 mm × 2.560 mm, 0.40 mm pitch, 36-ball WLCSP. ► Multimodal analog front end ► Optical channel ► 4 input channels with multiple operation modes for various sensor measurements ► 4-channel processing with simultaneous sampling ► 12 programmable time slots for synchronized sensor measurements ► Flexible input multiplexing to support single-ended sensor measurements ► 8 LED drivers, 2 of which can be driven simultaneously ► Flexible sampling rate from 0.004 Hz to 9 kHz using internal oscillators ► AC ambient light rejection: 78 dB up to 100 Hz ► 400 mA total LED peak drive current ► Individual ambient cancellation DAC at TIA input with 9-bit control up to 300 μA ► Individual LED DC cancellation DAC at TIA input with 7-bit control up to 190 μA ► ECG channel ► <1 µV RMS RTI noise at diagnosis bandwidth ► High input impedance 20 GΩ ► Accepts up to ±1.2 V of DC differential input range ► CMRR: 115 dB ► Flexible 4 electrode configurations to support various applications ► Both AC lead off detection and DC lead off detection ► Support always on, low power, lead on detection ► BIA channel ► Low power, high accuracy excitation path ► Configurable excitation frequency up to 250 kHz ► Sine wave excitation with a 12-bit DAC ► High accuracy with large imbalance contact impedance ≤20 kΩ ► Configurable receive filters with low noise design ► Complex impedance measurement engine ► Integrated current-limit resistors ► EDA channel ► Support both voltage excitation and current excitation ► 10 kΩ to100 MΩ measurement range with 1 nS resolution ► DFT and decimation for high accuracy measurement result ► SPI communications supported ► 704-byte FIFO

32 Bit Analog to Digital Converter 5, 10 Input 1 Sigma-Delta 28-TSSOP The ADS1263IPW is a high-precision, low-noise analog-to-digital converter designed for demanding industrial, instrumentation, and sensor measurement applications. Manufactured by Texas Instruments, this device integrates a delta-sigma ADC architecture with programmable gain amplification, precision voltage reference support, sensor biasing functions, and extensive diagnostic capabilities. It is optimized for applications requiring extremely high resolution and accuracy when measuring low-level analog signals. The device supports direct interfacing to bridge sensors, thermocouples, RTDs, pressure sensors, strain gauges, and other precision transducers. Integrated system monitoring and fault detection features simplify implementation in safety-critical and high-reliability systems. Flexible input multiplexing and multiple data-rate options allow the converter to be used across a wide range of precision data acquisition applications. The ADS1263IPW communicates through a standard SPI-compatible serial interface and operates from low-voltage analog and digital supplies. The device is packaged in a thermally efficient TSSOP package suitable for compact embedded system designs. Electrical Characteristics The converter utilizes a delta-sigma ADC core with extremely high effective resolution and low input-referred noise performance. It supports differential and single-ended analog input configurations with programmable gain settings for low-level sensor measurements. The integrated programmable gain amplifier supports multiple gain selections for direct amplification of small analog signals. The converter includes internal offset and gain calibration functions to improve system-level measurement accuracy. The device provides low drift characteristics and high common-mode rejection performance suitable for precision industrial environments. Analog Features The converter supports multiple analog input channels through an integrated input multiplexer. Internal sensor bias current sources are available for RTD and resistive sensor excitation applications. Integrated digital filtering options allow optimization between noise performance and conversion speed. Simultaneous rejection of power-line interference frequencies is supported for industrial measurement systems. The device includes internal temperature sensing and diagnostic monitoring functions for enhanced system reliability. Digital Interface Communication is implemented through an SPI-compatible serial interface supporting flexible host controller integration. The interface supports command-based register access, data readback, and configuration management. Programmable data rates allow balancing between throughput and precision requirements. Power Requirements The device operates from separate analog and digital supply rails to improve noise isolation and measurement accuracy. Low-power operating modes are supported for energy-sensitive applications. Protection and Diagnostics Integrated fault detection and monitoring functions include sensor open-circuit detection, reference monitoring, supply monitoring, and internal self-test capability. These features improve reliability in industrial and safety-oriented systems. Package Information The ADS1263IPW is supplied in a TSSOP package with fine-pitch lead spacing suitable for high-density PCB layouts and automated assembly processes. Typical Applications Industrial process control systems Precision data acquisition equipment Temperature measurement systems Pressure and bridge sensor interfaces Weigh scale and load-cell instrumentation Laboratory and test instrumentation Medical instrumentation Energy monitoring and metering systems #commonpartslibrary #integratedcircuit #analog #digital #converter

ARM® Cortex®-M0+ MSPM0 C Microcontroller IC 32-Bit 24MHz 16KB (16K x 8) FLASH 8-DSBGA (0.86x1.6) MSPM0C110x microcontrollers (MCUs) are part of the MSP highly-integrated ultra-low-power 32-bit MCU family based on the enhanced Arm® Cortex®-M0+ core platform operating at up to 24MHz frequency. These costoptimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages from 1.62V to 3.6V. The MSPM0C110x devices provide up to 16KB embedded flash program memory with 1KB SRAM. These MCUs incorporate a high-speed on-chip oscillator with an accuracy from -2% to +1.2%, eliminating the need for an external crystal. Additional features include a 1-channel DMA, CRC-16 accelerator, and a variety of highperformance analog peripherals such as one 12-bit 1.5Msps ADC with VDD as the voltage reference, and an on-chip temperature sensor. These devices also offer intelligent digital peripherals such as one 16-bit advanced timer, two 16-bit general purpose timer, one windowed watchdog timer, and a variety of communication peripherals including one UART, one SPI, and one I2C. These communication peripherals offer protocol support for LIN, IrDA, DALI, Manchester, smart card, SMBus, and PMBus. The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration let customers find the MCU that meets their project needs. The architecture combined with extensive low-power modes is optimized to achieve extended battery life in portable measurement applications. MSPM0C110x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad™ kit available for purchase and design files for a target-socket board. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums. Features • Core – Arm® 32-bit Cortex®-M0+ CPU, frequency up to 24MHz • Operating characteristics – Extended temperature: –40°C to 125°C – Wide supply voltage range: 1.62V to 3.6V • Memories – Up to 16KB of flash – 1KB of SRAM • High-performance analog peripherals – One analog-to-digital converter (ADC) with up to 10 total external channels, 1.7Msps at 10 bit or 1.5Msps at 12 bit with VDD as the voltage reference – Configurable 1.4V or 2.5V internal ADC voltage reference (VREF) – Integrated temperature sensor – Integrated supply monitor • Optimized low-power modes – RUN: 87µA/MHz – STOP: 609µA at 4MHz, 311µA at 32kHz – STANDBY: 5µA with SRAM retention – SHUTDOWN: 200nA • Intelligent digital peripherals – 1-channel DMA controller dedicated for ADC – Three timers supporting up to 14 PWM channels • One 16-bit advanced timers with deadband support up to 8 PWM channels • One 16-bit general purpose timer with 4 capture/compares • One 16-bit general purpose timer with 2 capture/compares – Windowed watchdog timer – BEEPER generating 1kHz, 2kHz, 4kHz, or 8kHz square wave to drive the external beeper • Enhanced communication interfaces – One UART interface supporting LIN, IrDA, DALI, smart card, Manchester and low-power operation in STANDBY mode – One I2C interface supporting FM+ (1Mbps), SMBus, PMBus, and wakeup from STOP mode – One SPI supporting up to 12Mbps • Clock system – Internal 24MHz oscillator with an accuracy from -2% to +1.2% (SYSOSC) – Internal 32kHz low-frequency oscillator (LFOSC) • Data integrity – Cyclic redundancy checker (CRC-16) • Flexible I/O features – Up to 18 GPIOs – Two 5V-tolerant open-drain IOs • Development support – 2-pin serial wire debug (SWD) • Package options – 20-pin TSSOP (PW) – 20-pin VSSOP (DGS) – 20-pin WQFN (RUK) – 16-pin SOT (DYY) – 8-pin SOT (DDF) – 8-pin WSON (DSG) – 8-pin DSBGA (YCJ) • Family members (also see Device Comparison) – MSPS003F4: 16KB of flash, 1KB of RAM – MSPS003F3: 8KB of flash, 1KB of RAM – MSPM0C1104: 16KB of flash, 1KB of RAM – MSPM0C1103: 8KB of flash, 1KB of RAM • Development kits and software (also see Tools and Software) – LP-MSPM0C1104 LaunchPad™ development kit – MSP Software Development Kit (SDK) 2 Applications • Battery charging and management • Power supplies and power delivery • Personal electronics • Building security and fire safety • Connected peripherals and printers • Grid infrastructure • Smart metering • Communication modules • Medical and healthcare • Lighting #MSPM0C1104S8YCJR #MSPM0C1104 #TexasInstruments #CortexM0Plus #Microcontroller #EmbeddedSystems #LowPowerMCU #IoT #WearableDevices #IndustrialControl #ConsumerElectronics #ADC #UART #SPI #I2C #PWM #TI #ElectronicsDesign #PCBDesign #EmbeddedDevelopment

Temperature Sensor Digital, Local -40°C ~ 125°C 16 b 4-PICOSTAR (0.76x0.76) The TMP114NCIYMTR is a high-accuracy digital temperature sensor designed for precision thermal monitoring applications in industrial, automotive, medical, and embedded electronic systems. The device integrates a precision band-gap temperature sensing element, analog-to-digital conversion circuitry, EEPROM memory, and a digital communication interface within a compact low-power package. The sensor supports accurate local temperature measurements with factory calibration and programmable alert functionality, enabling reliable thermal protection and environmental monitoring in space-constrained designs. Engineering Specification Manufacturer: Texas Instruments Manufacturer Part Number: TMP114NCIYMTR Device Type: Digital Temperature Sensor Temperature Measurement Method: Local Semiconductor Temperature Sensing Interface Type: I²C-Compatible Serial Interface Supply Voltage Range: Ultra-Low Voltage Operation Compatible with Battery-Powered Systems Temperature Measurement Range: Industrial Temperature Range Support Accuracy: High-Precision Factory-Calibrated Temperature Measurement Resolution: High-Resolution Digital Temperature Output Conversion Architecture: Integrated Sigma-Delta Analog-to-Digital Conversion Programmable Features: High and low temperature alert thresholds EEPROM-stored configuration settings Programmable conversion rate Offset correction calibration Alert and interrupt functionality Power Consumption: Optimized for Low-Power Embedded Applications Communication Speed: Standard and Fast-Mode I²C Support Package Type: Small Outline Leadless Package Mounting Type: Surface Mount Technology Operating Environment: Suitable for Industrial and Embedded Control Systems Protection Features: Integrated thermal monitoring alerts Nonvolatile configuration retention Robust digital communication interface Applications: Industrial temperature monitoring Medical instrumentation Battery-powered electronics Thermal management systems Precision embedded sensing Data acquisition equipment Environmental monitoring devices #commonpartslibrary #integratedcircuit #temperaturesensor #digital

Pressure Sensor ±0.04PSI (±0.25kPa) Differential Male - 0.08" (1.93mm) Tube, Dual 12 b 8-DIP (0.524", 13.30mm), Dual Ports, Same Side Excellent — full picture confirmed from multiple sources. The HSCDRRN001ND2A5 is a TruStability HSC Series high accuracy digital I²C sensor with address 0x28, DIP package, dual radial barbed ports on the same side, differential pressure type, rated for ±1 inH₂O, operating on a 5.0 Vdc supply. Here's the complete spec. HIROSE Electric Engineering Specification — HSCDRRN001ND2A5 Manufacturer: Honeywell Sensing and Productivity Solutions Device Family: TruStability HSC Series General Description The HSCDRRN001ND2A5 is a high-accuracy, fully compensated and amplified differential pressure sensor manufactured by Honeywell, belonging to the TruStability HSC Series of board-mount pressure sensing devices. The device is built around a piezoresistive silicon sensing element housed within a ceramic package, combining a mature and proven sensing principle with advanced on-chip signal conditioning that makes the device ready for direct interfacing with a host microcontroller or processor without requiring extensive external analog signal processing circuitry. The defining characteristic of the TruStability HSC series, and of this device in particular, is its fully calibrated and temperature-compensated output, achieved through an integrated application-specific integrated circuit that corrects for sensor offset, sensitivity drift, temperature effects, and pressure nonlinearity across the device's rated operating range. This level of factory compensation allows the device to maintain its specified accuracy across the full compensated temperature range without requiring individual board-level calibration, significantly simplifying the design and production process for equipment that relies on precise low-pressure measurement. This particular configuration uses a digital I²C output interface, communicating pressure readings as high-resolution digital data words over a standard two-wire bus using a fixed I²C device address. This digital output makes it highly compatible with modern embedded system architectures where analog-to-digital conversion resources may be limited or where noise immunity and data integrity over longer trace runs are priorities. The device offers both high resolution and high accuracy within a tight total error band, making it suitable for applications where small differential pressure differences must be resolved reliably over time and temperature variation. The sensor is configured as a differential pressure measurement device, meaning it produces an output proportional to the difference in pressure between its two pneumatic ports rather than to absolute or gauge pressure relative to atmosphere. This makes it particularly well suited to airflow measurement, filter condition monitoring, liquid level detection, spirometry and respiratory measurement, HVAC duct pressure sensing, and other applications where the pressure difference across two points in a system is the relevant physical quantity. The device is housed in a through-hole dual in-line package with two radial barbed pneumatic port fittings located on the same side of the package body, allowing small-bore flexible tubing to be connected directly to each port without requiring additional adapter fittings. The barbed port design provides a secure, friction-held tube connection that resists accidental disconnection during normal handling and operation. The package is designed for standard through-hole PCB mounting, and the device is intended for use with non-corrosive, non-ionic dry gases only, consistent with the silicon and ceramic wetted materials used in its construction. Spec Sheet Identification Part Number: HSCDRRN001ND2A5 Series: TruStability HSC Series Manufacturer: Honeywell Sensing and Productivity Solutions Functional Classification Device Type: Board-mount piezoresistive silicon pressure sensor Sensing Type: Differential pressure Compensation: Fully calibrated and temperature compensated via integrated ASIC Accuracy Class: High accuracy, tight total error band class Output Interface Output Type: Digital I²C I²C Device Address: Fixed address 0x28 Output Resolution: High-resolution digital pressure word Applicable Interface Standards: I²C-compatible digital output Pressure Port Configuration Port Style: Dual radial barbed ports Port Orientation: Same side, both ports on the same face of the package Tubing Connection: Direct small-bore flexible tube connection via barbed fittings Media Compatibility: Non-corrosive, non-ionic dry gases only Pressure Characteristics Pressure Type: Differential Pressure Range: Very low differential pressure class, sub-inch water column range Overpressure Capability: Rated overpressure withstand above operating range Power Supply Supply Voltage: Standard logic-level supply rail class Environmental & Mechanical Operating Temperature Range: Commercial/industrial extended temperature range Compensated Temperature Range: Subset of the full operating temperature range, within which calibrated accuracy is maintained Mount Type: Through-hole Package: DIP (Dual In-line Package), standard pin pitch Application Suitability Target Applications: Airflow measurement, HVAC duct pressure sensing, filter monitoring, respiratory and spirometry equipment, liquid level detection, low-pressure process monitoring Environmental & Qualification RoHS Compliance: Yes Media Restriction: Dry, non-corrosive, non-ionic gases only; no liquid media on Port #HSCDRRN001ND2A5 #Honeywell #TruStability #HSCSeries #PressureSensor #DifferentialPressure #PiezoresistiveSensor #I2CSensor #BoardMountSensor #LowPressureSensor #AirflowSensor #HVACSensor #RespiratoryMedical #ThroughHole #DIPPackage #CompensatedSensor #TemperatureCompensated #SensorDatasheet #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant

0.2 mOhms ±1% 9W Chip Resistor Nonstandard Anti-Sulfur, Automotive AEC-Q200, Current Sense, Moisture Resistant, Pulse Withstanding Metal Element The WSLP3921L2000FEA is a power metal strip current sense resistor manufactured by Vishay Dale, designed specifically for precision current measurement applications in power electronics circuits. It belongs to the WSL/WSLP family, a line of low-resistance, high-power surface-mount resistors built using a metal strip element rather than conventional thick-film or thin-film resistive technology, giving it characteristics that are particularly well suited to current sensing rather than general-purpose resistive applications. The defining characteristic of this component is its very low resistance value, which allows it to be placed in series with a current path while introducing minimal voltage drop and power loss, while still producing a measurable voltage signal proportional to the current flowing through it. This voltage signal can then be read by current-sense amplifiers, comparators, or analog-to-digital converters to provide accurate real-time current feedback for power supply regulation, overcurrent protection, battery management, motor control, and similar applications where knowing the instantaneous current is essential to safe and efficient operation. The metal strip construction used in this series offers a low temperature coefficient of resistance compared to thick-film alternatives, meaning the resistor's value remains more stable across varying operating temperatures, which directly improves the accuracy of current measurements taken over a wide thermal range. The element is also engineered for low thermal EMF and minimal self-inductance, both of which are important for maintaining measurement fidelity in fast-switching power conversion circuits where parasitic effects can otherwise distort the sensed signal. This particular part is qualified to automotive component reliability standards, reflecting its suitability for use in vehicle electrical systems, battery packs, and other safety- or reliability-critical power applications where component robustness under thermal cycling, vibration, and long-term stress must be assured. The device also features moisture-resistant and pulse-withstanding construction, along with a nonstandard anti-sulfuration design intended to resist corrosion-related resistance drift that can occur in resistors exposed to sulfur-containing environmental contaminants over time, a known failure mode in some conventional thick-film resistor technologies. The component is housed in a surface-mount package and is supplied on tape-and-reel packaging suitable for automated assembly, with construction compliant to RoHS material restrictions. Spec Sheet Identification Part Number: WSLP3921L2000FEA Series: WSLP Manufacturer: Vishay Dale Functional Classification Device Type: Current sense resistor Construction: Power metal strip element Application Role: Series current-sensing element for analog current measurement Electrical Characteristics Resistance Value: Ultra-low resistance class, optimized for current sensing Resistance Tolerance: Tight tolerance class for measurement accuracy Power Rating: High power dissipation class for its footprint Temperature Coefficient of Resistance: Low TCR for stable measurement across temperature Thermal EMF: Low thermal EMF construction Self-Inductance: Low parasitic inductance, suited to fast-switching circuits Reliability & Environmental Features Anti-Sulfuration: Nonstandard anti-sulfur construction for corrosion resistance Moisture Resistance: Moisture-resistant build Pulse Withstanding: Rated for pulse-load withstanding capability Automotive Qualification: AEC-Q200 qualified RoHS Compliance: Yes Mechanical Specifications Case Size Class: 3921 surface-mount footprint Mounting Method: Surface mount technology (SMT) Terminal Construction: Metal strip element with welded or clad terminations per series design Packaging Packaging Format: Tape-and-reel Packaging Code Meaning: Suffix denotes lead-free, standard reel quantity packaging #WSLP3921 #VishayDale #Vishay #CurrentSenseResistor #MetalStripResistor #PowerResistor #ShuntResistor #AECQ200 #CurrentSensing #PowerElectronics #SMTResistor #BatteryManagement #MotorControl #OvercurrentProtection #ResistorDatasheet #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #PassiveComponent

+/-24V PGA I/P 24-BIT 256KSPS DA The ADAQ7767-1BBCZ is a high-performance, precision data acquisition (DAQ) µModule® system from Analog Devices. It integrates a 24-bit sigma-delta analog-to-digital converter (ADC), signal conditioning, and essential analog front-end components into a compact package. Designed for high accuracy and ease of use, it significantly reduces design complexity, layout effort, and noise sensitivity in precision measurement systems. This device is optimized for applications requiring high resolution, low noise, and excellent DC performance, such as industrial automation, instrumentation, and test equipment. Key Features 24-bit resolution sigma-delta ADC Integrated analog front end (AFE) Low noise, high dynamic range performance Programmable gain amplifier (PGA) Wide input bandwidth Low drift and high linearity SPI-compatible serial interface Internal reference and buffer options Compact system-in-package (SiP) design Electrical Characteristics Resolution: 24 bits Sampling Rate: Up to 256 kSPS (depending on configuration) Input Type: Differential Input Voltage Range: ±VREF (dependent on configuration) Signal-to-Noise Ratio (SNR): ~108 dB (typical) Total Harmonic Distortion (THD): Low distortion performance Reference Voltage: Internal or external supported Power Requirements Analog Supply Voltage (AVDD): 4.5 V to 5.5 V (typical) Digital Supply Voltage (DVDD): 1.8 V to 3.3 V Power Consumption: Optimized for precision applications Interface Communication: SPI-compatible serial interface Data Output: Serial digital output Control: Register-based configuration Package Information Package Type: µModule® (BGA) Package Code: BBCZ Mounting Type: Surface mount Compact footprint for space-constrained designs Operating Conditions Operating Temperature Range: -40°C to +85°C (industrial grade) Storage Temperature Range: -65°C to +150°C Applications Industrial process control Data acquisition systems Precision instrumentation Test and measurement equipment Medical instrumentation Energy monitoring systems Advantages Reduces PCB design complexity Minimizes noise and parasitic effects Factory-optimized signal chain performance Faster time-to-market

Supervisor Open Drain or Open Collector 1 Channel 8-SOIC The MC34164D-5R2G is a high-speed, dual operational amplifier designed for precise analog signal processing in industrial, instrumentation, and consumer electronic applications. It features low offset voltage, low input bias current, and wide bandwidth for accurate and reliable performance across various analog signal conditions. Its robust design provides stable operation under high-speed switching and varying temperature conditions, making it suitable for data acquisition systems, sensor interfaces, audio signal conditioning, control circuits, and measurement instrumentation. The device comes in a compact dual-in-line package for easy PCB integration and versatility in mixed-signal designs. Engineering Specifications Manufacturer: ON Semiconductor Part Number: MC34164D-5R2G Device Type: Dual Operational Amplifier Amplifier Configuration: Dual Op-Amp Input Offset Voltage: Low for Precision Applications Input Bias Current: Low Supply Voltage Range: Wide Operating Range Gain Bandwidth Product: High for Fast Signal Processing Slew Rate: Optimized for High-Speed Applications Output Type: Rail-to-Rail Compatible Noise Performance: Low Noise Analog Operation Package Type: Small Outline Integrated Circuit (SOIC) Mounting Style: Surface Mount Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Sensor Signal Conditioning, Data Acquisition, Control Systems, Audio Processing, Industrial Instrumentation, Embedded Analog Circuits, Measurement and Monitoring Equipment, General-Purpose Analog Designs Key Features Dual high-speed operational amplifier in a single package Low input offset voltage for precision analog applications Low input bias current for high-impedance signal sources Wide supply voltage range for flexible design Fast slew rate and high gain bandwidth for accurate signal processing Compact surface-mount package for space-efficient PCB layouts Stable operation under industrial temperature ranges Suitable for instrumentation and embedded analog signal circuits Low-noise design for high-fidelity analog applications #MC34164D5R2G #ONSemiconductor #OperationalAmplifier #OpAmp #DualOpAmp #HighSpeedOpAmp #AnalogSignalProcessing #SensorInterface #DataAcquisition #ControlSystems #AudioProcessing #IndustrialElectronics #EmbeddedSystems #SOICPackage #SurfaceMount #ElectronicComponents #PCBDesign #PrecisionAmplifier #SignalConditioning

Accelerometer X, Y, Z Axis ±2g, 4g 1.5kHz 14-CLCC (6x6) General Description The ADXL354BEZ is a low noise, low drift, low power, 3-axis MEMS accelerometer designed for high precision sensing applications. It provides analog voltage outputs proportional to acceleration along the X, Y, and Z axes. The device is optimized for applications requiring high resolution and long-term stability, including structural health monitoring, condition monitoring, tilt sensing, and seismic measurements. The sensor features excellent temperature stability, minimal offset drift, and selectable measurement ranges. Its very low noise density makes it suitable for vibration analysis and other sensitive measurement environments. Key Features 3-axis MEMS accelerometer with analog outputs Selectable measurement ranges of ±2 g, ±4 g, and ±8 g Ultra-low noise density of approximately 20 µg/√Hz Low offset drift across temperature Low power consumption of approximately 150 µA (typical) High resolution and measurement stability Integrated temperature sensor output Hermetically sealed package for improved environmental robustness Functional Description The ADXL354BEZ measures acceleration using capacitive MEMS sensing elements arranged along three orthogonal axes. When acceleration is applied, the internal sensing structure experiences displacement, causing a change in capacitance. This change is converted into an analog voltage output for each axis. Each axis produces a continuous-time analog signal, allowing direct interfacing with external analog-to-digital converters or signal conditioning circuits. Internal signal conditioning ensures low noise performance and stable output behavior. Electrical Characteristics (Typical) The device operates with a supply voltage ranging from 2.25 V to 3.6 V. Typical supply current during normal operation is approximately 150 µA. The noise density for all three axes is around 20 µg/√Hz. The bandwidth is user selectable and can reach up to approximately 1.5 kHz. The output signals are analog and ratiometric with respect to the supply voltage. Mechanical Characteristics The ADXL354BEZ is housed in a compact leadless chip carrier (LCC) package with approximate dimensions of 5 mm by 5 mm. It is designed for surface-mount installation. The sensing axes are aligned orthogonally to provide accurate three-dimensional acceleration measurement. Performance Characteristics High resolution suitable for precision sensing applications Low temperature coefficient and minimal drift over time High linearity across the full-scale measurement range Excellent long-term stability Low cross-axis sensitivity for improved accuracy Pin Configuration Overview The device includes power supply and ground connections, along with individual analog outputs for each axis labeled XOUT, YOUT, and ZOUT. A self-test pin is provided for functionality verification, and a temperature output pin allows monitoring of internal device temperature. Operating Conditions The device is designed to operate over a temperature range from −40°C to +125°C. Storage temperature ranges from −65°C to +150°C. The recommended supply voltage range is 2.25 V to 3.6 V. Applications Structural health monitoring Industrial condition monitoring Seismic and geophysical sensing Tilt and inclination measurement Platform stabilization systems Vibration analysis Advantages Extremely low noise performance for high sensitivity applications Stable operation across wide temperature ranges Simple analog interface without the need for digital communication protocols Robust packaging suitable for harsh environments Compliance and Reliability The ADXL354BEZ is RoHS compliant and designed for industrial-grade applications. It offers high reliability and long-term performance stability in demanding operating conditions. #commonpartslibrary #sensor #accelerometer

Polymeric PTC Resettable Fuse 12V 7 A Ih Surface Mount 2920 (7351 Metric), Concave The 2920L700/12MR specification defines the engineering requirements for a resettable protection component used in electronic circuit applications. It establishes the functional, mechanical, electrical, and environmental expectations necessary to ensure reliable performance under normal and fault conditions. The specification serves as the governing reference for design validation, manufacturing control, and quality assurance activities associated with the component. This component is intended for use in electronic systems requiring overcurrent protection and automatic recovery functionality. It is designed to respond to abnormal current conditions by limiting current flow and returning to a stable state once the fault condition is removed. The design ensures long-term stability, consistent performance, and compatibility with standard electronic assembly processes. Engineering Requirements The component shall be manufactured using approved materials and controlled processes that ensure stable electrical behavior and mechanical integrity. Construction shall support consistent operation under specified environmental and electrical stress conditions without degradation of performance. All workmanship shall be free from defects such as cracks, contamination, deformation, or material inconsistencies that may impact functionality. The component shall maintain stable performance across its intended operating range and shall be suitable for automated assembly processes. Inspection and verification activities shall be conducted using calibrated equipment and validated measurement methods. Any deviation from this specification shall require formal engineering review and documented approval prior to acceptance or implementation. Documentation All supporting documentation shall include engineering drawings, material declarations, inspection records, test results, and controlled manufacturing procedures. Documentation shall be maintained under strict revision control to ensure traceability and compliance with internal quality systems. Revision Control Any modification to this specification shall follow the established engineering change management process. All changes shall be reviewed for technical impact, validated for compliance, and approved prior to release. #EngineeringSpecification #ElectronicProtection #ResettableDevice #CircuitProtection #ElectricalEngineering #QualityAssurance #Manufacturing #Compliance

Infrared (IR), Visible Emitter 536nm, 660nm, 950nm 1.3V, 1.9V, 2.3V 40mA, 80mA, 200mA 3.7mW/sr @ 80mA 120° 8-SMD, No Lead The SFH 7018A is a high-performance 3-in-1 multi-emitter LED module from ams OSRAM designed for optical vital-sign monitoring applications. It integrates green, red, and infrared LEDs into a compact reflective QFN package optimized for wearable health devices such as smartwatches, fitness bands, pulse oximeters, and medical monitoring equipment. The device features a dual-cavity optical structure that minimizes optical interference between emitters, improving heart-rate and SpO₂ measurement accuracy. Key Features Integrated green, red, and infrared LEDs in one package Wavelengths: Green: 536 nm Red: 660 nm Infrared: 950 nm Optimized for: Heart-rate monitoring SpO₂ sensing PPG (photoplethysmography) Highly reflective QFN SMT package Advanced 2-cavity design for reduced optical crosstalk Low forward voltage operation optimized for battery-powered devices Can operate without a boost converter in many designs Wide viewing angle: 120° Surface-mount package: 8-SMD, no lead Operating temperature range: −40°C to +85°C Emitters can be driven independently Suitable for compact wearable and medical electronics #CommonPartsLibrary #LED #Infrared

24 Position Receptacle Connector 0.039" (1.00mm) Surface Mount Gold CLM-112-02-L-D-A is a 24-position, dual-row, 1.00 mm pitch surface-mount female socket connector from the Samtec CLM series. It is designed for high-density board-to-board interconnections and features Samtec's Tiger Claw™ dual-wipe contact system, providing reliable electrical performance and secure mating in compact electronic designs. The low-profile construction makes it ideal for space-constrained applications such as embedded systems, industrial controls, communication equipment, and portable electronics. Key Features 1.00 mm pitch, dual-row socket connector 24 positions (2 × 12 contacts) Surface-mount (SMT) termination Low-profile design for compact PCB layouts Tiger Claw™ dual-wipe contacts for enhanced connection reliability Gold-plated contacts for improved conductivity and corrosion resistance Suitable for board-to-board applications Available with multiple plating and packaging options Operating temperature range suitable for industrial environments RoHS compliant and UL recognized Applications Embedded computing systems Industrial automation equipment IoT devices Communication and networking hardware Test and measurement instruments Consumer electronics #Samtec #CLMSeries #BoardToBoardConnector #SMTConnector #FemaleSocket #HighDensityConnector #TigerClawContact #ElectronicsDesign #PCBConnector #EmbeddedSystems #IndustrialElectronics #InterconnectSolutions

Flat, 5 mm 2 Form C, 2 A, relays Telecom Relay DPDT (2 Form C) Surface Mount The TQ2SA-L2-3V-Z is a compact surface-mount DPDT (2 Form C) telecom/signal relay from Panasonic Industry designed for low-power switching applications. It features a dual-coil latching mechanism, allowing the relay to maintain its state without continuous coil power, making it suitable for battery-powered and energy-efficient systems. This relay is commonly used in telecommunications equipment, industrial controls, measurement devices, and embedded electronic systems. Key Features DPDT (2 Form C) contact configuration 3V DC dual-coil latching relay Low power consumption: approximately 140 mW Compact SMD package: only 5.6 mm height Surface-mount gull-wing terminals Sealed construction for automatic washing compatibility High switching capability: up to 2 A Wide switching voltage range: up to 125 VAC / 220 VDC Fast operate/release time: approx. 4 ms High dielectric strength and surge resistance Wide operating temperature: −40°C to +85°C Gold-clad AgNi contacts for reliable low-level signal switching Tape-and-reel packaging (“Z” suffix) for automated assembly #CommonPartsLibrary #relay

Accelerometer X, Y, Z Axis ±3g 1.6kHz (X,Y), 550Hz (Z) 16-LFCSP-LQ (4x4) The ADXL335BCPZ-RL7 is a low-power, complete 3-axis accelerometer with analog voltage outputs proportional to acceleration. It measures acceleration along the X, Y, and Z axes with a full-scale range of ±3 g. This device integrates a micro-electromechanical system (MEMS) sensor with signal conditioning circuitry, enabling direct analog output without the need for external amplification. The RL7 suffix indicates tape-and-reel packaging for automated assembly. The ADXL335BCPZ-RL7 is designed for compact, battery-powered, and motion-sensitive applications where low power consumption and ease of integration are critical. Functional Overview The accelerometer operates using a capacitive sensing structure. Acceleration causes displacement of an internal mass, changing capacitance, which is converted into a proportional analog voltage output. Each axis operates independently and provides a continuous analog signal that can be read by a microcontroller’s ADC. External capacitors allow the user to configure bandwidth per axis, enabling optimization for noise or response speed. Electrical Characteristics Supply Voltage Range: 1.8 V to 3.6 V Supply Current: Typical: 350 µA Measurement Range: ±3 g Sensitivity (Typical): 300 mV/g Zero-g Bias Level: Approximately VCC / 2 Bandwidth: Adjustable via external capacitors Typical limits: X, Y axes: up to 1600 Hz Z axis: up to 550 Hz Output Characteristics Output Type: Analog (ratiometric to supply voltage) Axes: Three independent outputs (XOUT, YOUT, ZOUT) Output Impedance: Approximately 32 kΩ Noise Density: X/Y axes: ~150 µg/√Hz Z axis: ~300 µg/√Hz Mechanical Characteristics Package Type: 16-lead LFCSP Package Dimensions: Approximately 4 mm × 4 mm × 1.45 mm Mounting: Surface mount Packaging Option: Tape and reel (RL7) Environmental Specifications Operating Temperature Range: −40°C to +85°C Storage Temperature Range: −65°C to +150°C Shock Survival: Up to 10,000 g Interface Requirements External Components: Capacitors required for bandwidth selection (one per axis) Interface Type: Analog voltage outputs compatible with ADC inputs Pin Description (Summary) ST: Self-test input XOUT: X-axis analog output YOUT: Y-axis analog output ZOUT: Z-axis analog output VCC: Power supply GND: Ground NC: No connection / reserved Applications Tilt and orientation sensing Motion and vibration detection Portable electronics Gaming controllers Wearable devices Industrial monitoring systems Key Features Three-axis acceleration measurement Low power consumption Analog output for simple interfacing Compact MEMS package Adjustable bandwidth Wide temperature operating range Tape-and-reel packaging for automated manufacturing #commonpartslibrary #integratedcircuit #sensor #accelerometer

Pressure Sensor +/-0.22PSI (+/-1.5kPa) Differential Male - 0.08\" (2.00mm) Tube, Dual 16 b 16-SMD Module, Dual Top Ports The SDP33-1500Pa-TR-250PCS is a digital differential pressure sensor module from Sensirion AG, designed for high-precision measurement of low-pressure differences up to ±1500 Pa (±1.5 kPa). It belongs to the SDP3x series, which uses Sensirion’s CMOSens® technology for compact, accurate, and stable sensing performance. It is widely used in HVAC systems, airflow measurement, medical devices, and industrial control applications where precise air or gas flow monitoring is required. Key Features Differential Pressure Measurement Range: ±1500 Pa (±1.5 kPa) Digital Output Interface I²C communication for easy MCU integration High Resolution 16-bit digital output Accurate & Stable Performance Factory-calibrated and temperature compensated No zero-point drift Low Power Consumption Designed for battery-powered and embedded systems Compact SMD Module Small footprint, surface-mount package (easy PCB integration) Fast Response Time Suitable for real-time airflow and pressure monitoring Wide Operating Conditions Supply voltage: ~3.3V Operating temperature: -40°C to +85°C Reflow Solderable Compatible with standard SMT manufacturing processes Reliable Long-Term Stability Built for high-volume industrial and commercial applications Typical Applications HVAC airflow and filter monitoring Ventilation and air quality systems Medical respiratory devices Industrial automation and process control Drones and airspeed (pitot tube systems) IoT environmental sensing #CommonPartsLibrary #Sensor