Part Review and Datasheet Verification


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll review the part metadata, find and set the official datasheet URL if missing, then cross-check symbol, footprint, and pin descriptions against the datasheet and report mismatches.
Reviewed the part against the TI datasheet already attached in the Datasheet URL property; no datasheet update was needed.
Key result: the 8-ball DSBGA symbol pin mapping matches the datasheet, but I flagged issues with VSS being typed as Power Out, the X experimental-silicon MPN status, sparse pin descriptions, and possible footprint pad-size/unit ambiguity versus TI’s 0.35 mm pitch / 0.18 mm land pattern guidance.
Full report: part-review-xmsm0c1104s8ycjr
Fix part issues
Fix VSS type
Add pin descriptions
Verify footprint geometry
Run ERC/DRC

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
PA24
A1
Bi-Directional
PA0
A2
Bi-Directional
PA27
B1
Bi-Directional
PA1/ NRST
B2
Bi-Directional
PA20
C1
Bi-Directional
VDD
C2
Power In
PA19
D1
Bi-Directional
VSS
D2
Ground

MSPM0C1104S8YCJR