Reviewed the ADPD7000BCBZR7 part information and found the official ADI datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adpd7000.pdf. I recorded it in the project Implementation Details because the available project-level metadata editor does not expose a dedicated Datasheet URL field here.

Key specs: Analog Devices ADPD7000 multimodal sensor front end, SPI interface, 36-ball WLCSP/CB-36-11, 2.795 mm × 2.560 mm nominal body, 0.40 mm pitch; supplies are AVDD/DVDD 1.8 V, AVDD3 3.3 V, and IOVDD 1.7–3.6 V.

Cross-check result: all 36 symbol/terminal ball assignments match the datasheet pin table, and the footprint contains 36 pads as expected. Main mismatch flagged: every terminal currently has Pin Type: Unspecified and lacks datasheet pin descriptions, so the symbol is functionally mapped correctly but under-described for ERC/documentation quality. The selected review checks report no open errors or warnings.

I’ll update every terminal with datasheet-backed Pin Type, Pin Description, and Section fields, then re-read the schematic and checks to confirm the cleanup.

Updated all 36 ADPD7000 terminals with datasheet-backed Pin Description, non-unspecified Pin Type, and Section.

I normalized values to platform-standard options: supplies are Power In, grounds are Ground, GPIOs are Bi-Directional, SPI/sensor/LED pins are typed as input/output/passive as appropriate. Verification passed: the terminal properties are present and the terminal review checks show no open errors or warnings.